ICP Mappings being picked up by Catch all and not by like mappings???

Hello,
In FDM we have set up mapping tables for Account and ICP. In the source G/L the account drives both Account in HFM and ICP. Both of the mappings are the same:
???-3950-000 account mapps to 3111315
???-3950-000 ICP maps to CORUS117
When I validate the file the account gets picked up correctly but the ICP get picked up by the catch all of * -> [ICP None].
If i change the like mapping to an explicit mapping it works, can anyone help?
John

In your like map does the *->ICP None come before the ???-395-000 mapings?
If yes put the ??? above the *.

Similar Messages

  • I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening

    I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening?

    You posted in the OS 9 & below forum. What OS X version are you using? What model Canon printer? Canon printers have a test print capability (open the Printer Utility). What happens when you do a test print? Are all the printer cartridges in their proper location? Sometimes when you print "black", the printer uses a mixture of the colors to get "black". In the Printer Utility, check the levels of the other cartridges. There may be one color that is clogged.
     Cheers, Tom

  • Why is my text being sent by my iCloud account and not my number

    My text are being sent by my iCloud email and not my phone number. Why? and how do I change it back.
    Thanks
    Rebecca

    Settings>Messages>Send & Receive
    Add your phone number and set it as the default to send messages from.

  • Emails are only being delivered to the WebOutlook inbox and not my desktop outlook

    1.  Big Problem:  How do I get emails sent to my primary email address (name @ wealthblush dot com hosted by Go Daddy) to go to both the
    Outlook Web App inbox AND the inbox of my desktop Outlook 2013? They only go to
    Outlook Web App and not my desktop Outlook 2013.
    How is the email account configured in Outlook (POP3, IMAP or Exchange):
    POP/SMTP is for the user @ wealthblush dot com - this is the one where the email ONLY goes to the Outlook Web App, but not into Desktop Outlook 2013.
    IMAP/SMTP  is for the user @ charter dot net email. Emails go to both clients, but if I delete on one client it is not deleted on the other.
    Exchange/ActiveSync is the outlook.com email and it only goes to my desktop Outlook.
    I'm not getting any error messages. Mail is being delivered to the user @ wealthblush dot com, but only to Outlook Web App and NOT my desktop Outlook.
    2.  How can I change the inbox an email account puts incoming emails into? I read somewhere the way to do this is to create a search folder? This question is actually in advance of fixing
    question number 1 above.
    3.   I don't know how I should configure my emails with the new Outlook 2013 now being in the cloud:
        - I have an @ outlook dot com email I setup when MS came out with the free outlook dot com (hotmail), but I never used it because the reminders didn't work the same as in desktop outlook (not being able to snooze for a few hours
    or days or weeks if I remember right and the way we get the alerts too).
        - I also have an email with my ISP (@ charter dot net) which is a mix of personal and business emails. I've had this account for over 10 years.
        - Finally, I have a business website (www dot wealthblush dot com) hosted by GoDaddy with one real email @ wealthblush dot com. I've already setup the aliases for several other emails in my new office 365 account (support,
    sales, webmaster at wealthblush dot com) which are configured to pass into specific folders using Outlook 2013 Rules in my desktop outlook. I'm not sure if those rules are replicated into the office 365 account.
    I still want the aliases to go into those folders like before.
    4.  In the case of my outlook.com email, they do go to both inboxes (on the web and desktop), but when I delete an email from one place, shouldn't it get deleted in the other place as well? How do I get them to synch?
    5.   And then there's my existing .pst files. I have 4 of them with old emails I've saved over the years that takes up just over one GB. I save these .pst files to DVD everyday so I can go back to look at something if I need to (and for hard drive
    crashes). Does MS want me to import all that stuff to their servers and get rid of my .pst files? Does MS want me to put everything into one .pst file? It seems like it? If I do then I assume things need to be synchronized all the time between my file and
    your .pst file? The synchronization process is as close as you can get to real-time, right? Or does each individual change get sent as it happens?
    6.  I also have a skydrive account from a while ago too. Is this where I should put my documents so they're accessible when I'm not at my desk? Now, that would be a LOT of data (probably close to 80 GB). Or, is the intention for us users
    to only put certain current docs in this area. I assume these files can be synced with my desktop too, right? But I don't know how to. Do you keep old versions of the files in skydrive so we can recover them? I want to know if I can use your service to hold
    my files (they would ONLY exist on your system and you'll back them up and I can get old versions back when needed).
    7.  Is an option to keep everything on my desktop 2013 like I did in 2010 of Outlook, bypassing the cloud and MS mail servers all together?
    Sorry about all the questions, but I'm just getting the feel for your approach and need to decide how this all should fit together, do it, then go back to my business. I'm by myself at my company right now, but I'm planning on hiring a few people
    real soon too so I need to keep this in mind. I've worked with Outlook since it came out, and I've configured it, but mainly only for myself and my family.

    R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
    http://support.microsoft.com/kb/2758902
    R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
    http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
    Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
    Thanks for the understanding.
    Steve Fan
    TechNet Community Support

  • How to force BI Server to pick from the Agg table and not the Fact table?

    Hi All,
    I have 3 tables as the Sources in the Key measures. 2 are fact tables and the other one is the agg table.
    E.g.
    Fact 1 at A,B,C,D and E level
    Fact 2 at A,B,C level
    Agg at A,B,C level which contains the measures from the Fact1 and Fact2
    So when I select the measures from the Agg which are coming from Fact1 the Agg table get fired and when I select measures from Agg which are coming from Fact2, the Fact2 table gets fired in the SQL Query.
    Now my question here is there anyway to tell BI Server that when I select Fact2 measures fire the Agg table and not the Fact2 table. The reason being the Agg and Fact2 tables are at the same level.
    But I need to keep the Agg table as it is one level higher than the Fact1 tables.
    Any pointers would be helpful.

    hi,
    you explain us your situation really good.but you forgot to tell us the most import,the measures in aggregate table and the aggregated dimensions.
    meaning,you have 7 measures aggregated in some levels of your dimensions tables?if yes,there is no possibility Bi goes anywhere else..(by choosing only these measures and the defined levels at your dimensions..)
    One more thing,if you choose a combination of your 2 fact data sources,bi goes?where???
    hope i helped...
    http://greekoraclebi.blogspot.com/

  • Query data being picked from which data targets and dimension tables.

    Hi Guys,
    I need help from you people.
    My query is "If we execute any query, i want to know from which data targets and from which dimension tables data being read in the run time", is there any program or any table to find this data.
    thanks in advacne.
    Regards
    Prasad

    Hi Prasad,
    We will get Data target information in query level in information TAB.
    If you want get dimension tables information also you need use technical business content(bwstatistics) Cubes and need to customize the required information. I think standard statisics cubes is not provide dimention tables information. Need to customize that.
    Hope it will help for you.
    Thanks,
    Chandra

  • Cellular data being used while connected to WIFI and not in standby

    I am connected to my home WIFI on my iphone 4, but while my router is not connected to internet (so I should not have internet on my iphone), I noticed I am still receiving push notifications,
    I finally read here that while on standby, wifi is turned off and 3G is used, ok.
    now here is the problem, looking at the General>Usage>Cellular Usage, even if I am not on standby and I am using the phone, I have data usage (sent and recieved), I reopen the Celluar Usage and see the numbers are constantly increasing, and more strange is some (not all) of the push notification do come through (eg in my case for an app called FavFriends),
    another friend of mine has a simillar problem on iphone 4s.
    what is this celluar usage in the background?????

    from what I knew so far, iphone should not use the 3G if wifi is connected, eventhough there is no internet on that wifi,
    so in my case, if iphone is actually detecting no internet and switching to 3G, I should have internet on all apps (safari, etc..) which i dont, just data usage increasing with no internet in any apps (that is a 3G usage which is limited more than even when on standby),
    and if it is not supposed to switch, it brings another question, that if 3G is used when wifi connected (with no internet), are there any background 3G usage (push notifications, etc), while wifi has internet and it is supposed to utilize the wifi internet?
    so basically, I was under the assumption that 3G would not be used unless wifi is disconnected, regardless of internet access, and I dont find anything that says otherwise.

  • Why packets are being translated by one route-map and not the other?

    Hi,
    I have 2 NAT rules, each with a route-map to determine which packets are translated. What I don't understand is how to control which NAT rule is applied first..?
    In my config, the first of the following rules is applied first, and then the other. I would like to have it the other way round, the second being applied first, and the first being applied second.
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    The reason why I want it this way round is because the first rule NAT's almost everything so that I can access the Internet. The second rule NAT's specific traffic to a different address.
    If I want traffic to be NATTED according to the second rule, I have to deny traffic in the first associated ACL, and permit it in the second ACL. That means I basically have to configure each ACL each time I want packets to be matched by the second NAT rule - there must be a better way of doing it!!!
    Any help would be most appreciated.
    Many thanks,
    Michael.

    Hello, here's the basic (shortened list). If I want packets to be matched by NAT_RADIANZ_PIXACCESS_ACL I have to put a deny in NAT_INTERNET_ACCESS_ACL. If I could make sure that the first list is used first, and then anything left over compared against the second, then it would make life/editing much easier...
    Cheers,
    Michael
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static udp 10.10.11.1 500 10.10.11.1 500 extendable
    ip nat inside source static udp 10.10.11.1 4500 10.10.11.1 4500 extendable
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    ip access-list extended NAT_INTERNET_ACCESS_ACL
    remark Traffic to Branch A (over VPN)
    deny ip 172.16.101.0 0.0.0.255 192.168.1.0 0.0.0.255
    remark Traffic to Branch B (over VPN)
    deny ip 172.16.101.0 0.0.0.255 172.16.0.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.1.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.2.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.3.0 0.0.0.255
    remark Traffic to Cust A (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.1
    deny ip host 172.16.101.2 host 192.168.0.1
    remark Traffic to Cust B (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.2
    deny ip host 172.16.101.2 host 192.168.0.2
    remark Traffic to Cust C (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.3
    deny ip host 172.16.101.2 host 192.168.0.3
    remark Traffic to Cust D (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.4
    deny ip host 172.16.101.2 host 192.168.0.4
    permit ip any any
    ip access-list extended NAT_RADIANZ_PIXACCESS_ACL
    remark Manangement Traffic to Cust C
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    remark Manangement Traffic to Cust D
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    route-map NAT_RADIANZ_PIXACCESS_RMAP permit 10
    match ip address NAT_RADIANZ_PIXACCESS_ACL
    set ip next-hop 10.10.11.14
    route-map NAT_INTERNET_ACCESS_RMAP permit 40
    match ip address NAT_INTERNET_ACCESS_ACL
    set ip next-hop xxx.xxx.xxx.xxx

  • My notes are being stored on my outlook account and not icloud

    Hello,
    one of the email accounts on my iphone is linked with a work msoutlook account. A problem is that the notes that i enter into my iphone end up on my outlook account and not my icloud account. Does anyone know how to remedy this?
    -L8

    Go to Settings>Notes>Default Account and set it to iCloud.  Then open the Notes app, tap Accounts at the top, tap your iCloud account on the Accounts list, then try creating a new note and confirm that it appears on icloud.com now.  If it does, leave things this way and your notes will sync properly with iCloud.

  • I have an Iphone 5 and I'm abroad at the moment. My iMessages keep being sent from my phone number even though I took out my SIM card. My question is, will I be charged for them because they are being sent from my phone number and not my email?

    This might be a stupid question but I'm quite concerned that my phone bill will be sky high because of it.

    Hi mlemonache,
    Here's a blip from the IOS Message support site:
    On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can adjust this behavior in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage appear in a light blue bubble, while messages sent using SMS or MMS appear in a green bubble.
    Here is a link to the site:
    http://support.apple.com/kb/HT3529
    Hope this helps!
    Cheers,
    GB

  • My imessage texts are being sent from my email address and not my phone number.

    How do I change so imessages are sent from my phone number again and not my email?

    To identify your iMessages as coming from your phone number go to Settings>Messages>Receive At>Caller ID and select your phone number rather than your email address.  Also, the email can't be removed because this is the email address linked to the Apple ID you are using for iMessage.  If you really want to remove it you have to go to Settings>Messages>Receive At, tap the Apple ID at the top and sign out.

  • TS1424 itune purchases are being billed to a credit card and not itunes card

    The last two itunes purchases have been billed to my credit card and not my itunes gift card as it has been done previously, why is this?

    If you need to review your Purchase History, follow the steps in this article:
    http://support.apple.com/kb/HT2727

  • Force Human Intervention from BPEL catch all

    Hello! I am fairly new to SOA and ....
    I have a BPEL with a catch all and I would like to force the BPEL process to go into a human Intervention ( restartable ) state when this is hit. I have been looking at fault policies but the seem to only take affect when you inoke another service etc. They do work and set the process to humant intervention but when I use the Catch all etc. form inside the BPEL I cannot find how to force the BPEL to a human intervention state.
    What I need to do is that anytime the BPEL process fails to be able to restart it.
    Thanks for any help.

    Ok, so in this case the service call succeeded but the data caused a problem later.
    In this case I would try and make the processing logic able to gracefully handle the lack of data but I understand the use case now.
    Unfortunately in order to implement this it will be somewhat of a workaround.
    You could move all of your logic into a subprocess that throws a fault to the main process from its catch all. In the main process you could then use a fault policy to make the entire sub-process retryable.

  • Configure a Catch-All Mailbox in Exchange 2013

    Is it possible to create a catch-all rule which delivers mail sent to a non- existing mail address inside the organization (*@contoso.com), to a specific
    mailbox?
    Exchange 2013 Standard

    Hi All
    I have also used the Catch all agent from Codeplex, with great success.
    The only issue is, that the catch all transport agent HAS TO be installed, while your still at level CU3 or lower.
    We are now at exchange 2013 CU7, and the Catch all agent still works like a charm.
    Forget about journaling rules, these doesn´t work, in my experience

  • White screen displays sporadically during interactive content and not for all users

    We have an unusual thing happening with some users (5% or less) experiencing a white screen/program lockup when interacting with the training.  We think this is related to missing java script file(s), but we aren't 100% sure.
    Training is occurring on a variety of different laptops and workstations across the country.  All are suppose to be using the latest version of IE (and java).  There is no commonality between hardware, users or where in the program the issue occurs.
    Some people experience it in module 5 when they have to type data, and others may experience it in module 2 where they just have to click the continue button ( any module for any action - it truly is that random).  What's more we can't reproduce the problem on machines that have the latest java files.  We have looked over the physical layout of each slide but can find no commands or objects that would cause the problem.
    Has anyone experienced this type of sporadic issue?  Does anyone have a suggestion for how to fix it? -
    Any insight or advice would be greatly appreciated, Debra

    think they blocking us all and not telling us why think they have manger problems with new cloud atm im useing a  stand alone portable phtotoshop cc till they get it fix .

Maybe you are looking for