ICR PROCESS 001 functionnality - Field catalog
Hello,
i am implementing the new solution ICRC in my french customer for version ECC6.
i tried to add the field BVORG through the customizing point FBIC006 ("create additionnal field") for process 001.
i activated the transaction data tables (FBIC004). The result is that my field BVORG appears in my field catalogs. the status of field BVORG is "subassignment".
When processing FBICA1, the value field BVORG is not alimented when i checked the table FBICRC001A. Do you have a solution for my problem ?
my need is to use the field BVORG in automatic assignment.
Thanks a lot
Nicolas
Hello Nicolas,
Adding the field should be sufficient. Are you sure you are up to date on all corrections? Anything containing LFB_ICRC_SERVICES* might make a difference... Please note that your sypmtoms may not necessarily be mentioned in the note text. If none of them help, you should open a service ticket.
Best regards,
Ralph
Similar Messages
-
ICR - Process 001 and Process 003 - Setting Ledgers
Hello,
I must create the ledgers (I1 and I3) for ICR Process 001 and 003, but I don't know as setting them.
Can you help me?
Thank you so much.
Best regards
GiampaoloHello Giampaolo,
BCF is not relevant for ICR in my opinion. Why do you need this?
Best regards,
Ralph -
ICR - Process 001 and Process 002 Obligatory Group Chart
Hi,
another problem with ICR. I use ICR process in ECC 6.0 version but my client don't use the Group Chart. how can I use ICR processes to riconciliation my company?
Can you help me?
Thank you very much.
Best regards.
GiampaoloHi Ralph
I'm in the same Giampaolo's situation, but i don't undersatand some points.
I have two company with two different chart of account (operative not group)
Company A: chart of account X
Company B: chart of account Y
1° Queston: what chart of account i have to fill in transaction FBIC010 (i have only one filed), i can fill it INT or another Dummy chart of account?
2° Question: If i well understand i have to set up a badi in order to transfer operative account to group account number.
My customer doesn't need any sets with multiple account.
Thank you very much for your support.
Have nice day
Alessandro -
ICR Process 003- Adding new field BVORG
Hi,
I am hoping Ralph will see this post and grant some of his wisdom. I have searched this forum as well as OSS and can't seem to find a good answer to my issue.
I am in the process of implementing the ICR Process 003 in our development system. I have added field BVORG for the purposes of matching, but it remains blank in FBICRC003A. I have done the following:
1. FBIC006- Added BVORG with the Sender field BVORG
2. FBIC004- Reactivated the Transaction data tables and can see BVORG was added
3. FBRC008- Verified BVORG is added as a Subassignment
I even started from scratch before this by deleting all data in FBICRC003A and Ledger I3. I realize old data may not be populated, but after the above configuration and activation, the BVORG field in the line items table still remains blank on new postings.
Any thoughts on what I may have missed? I did find one OSS Note 1405114, but this seems to apply to Process 002 not 003. Is there a corresponding note for Process 003 or another solution?
thanks in advance
Nathan
Edited by: Nathan Crowther on Mar 9, 2012 5:54 PMHello John,
BVORG cannot be filled at the time of posting - just like the FI document number. This is why you cannot maintain this in the field movement.
This information is supplied by program FBICRC002_DOCNR_SELECT. The program is automatically executed in sender systems where data is picked up by data selection. If you post directly into your reconciliation ledger you need to execute the program yourself - a good time would be right before automatic assignment. If you have the corrections of note 1405114 applied to the program it will fill BVORG if the field exists in your ledger.
I do not understand why you would add that field to the totals table, though. This will result in a lot of additional entries in your totals table - one for each BVORG. You really should add this field to the line item table only!
Best regards,
Ralph -
ICR Leading zero on field DOCREFNR in process 002
Hello,
Like some other people here on this forum, I've noticed that the process 002 behave a bit differently in terms of field mapping.
DOCNR cannot be used like in other processes, because it's filled with another number than BELNR. I need to use REFDOCNR instead.
But I need REFDOCNR to be formatted without leading zeros.
I read on this thread (ICR process for GL accounts.) that it's possible to do it by user exit in the field movement definition.
But my question is that in my field movement I don't have the mapping BELNR -> REFDOCNR, this mapping is built-in, so I don't know exactly where I should define the user exit.
Can you please advise?
Best regards,
MaximeHello Maxime,
When posting directly to a ledger the FI document number is not known at the time the SL document is posted. This is why SL creates its own document number. You have the information in the REF* fields which lead you back to the connected FI document. This is exactly what program FBICRC002_DOCNR_SELECT does. It finds the corresponding FI document and puts the FI document key information into the fields FAGL_* in FBICRC002A; the correct FI document number will be contained in FAGL_DOCNR.
If you collect the data for process 002 using the data selection program, FBICRC002_DOCNR_SELECT is executed automatically as part of the data selection process in the sender systems. For documents posted directly into the reconciliation ledger in the reconciliation system you need to run the program yourself - I suggest that you do this each time before you run automatic assignment.
If you want to manipulate any information as it is posted into the special purpose ledger you set up you should implement an exit called by the field movement.
If you want to manipulate FAGL_DOCNR as it is populated by FBICRC002_DOCNR_SELECT, you need to implement BADI method CHANGE_DATA_TABLE for event if_ex_fb_icrc_002=>gc_evt01_remote_select.
Best regards,
Ralph -
ICR - Process and selection criteria
Dear experts,
We are thinking about implementing ICR tool next year.
In terms of faisability, I was wondering about the folllowing:
1/ Our need is to reconciliate G/L accounts, payable/receivable accounts, P&L accounts. In that case, which process should be implemented?
2/ We have various ways to identify an intercompany document. Is is possible to use other fields instead of 'trading partner' in FBICSx to select documents?
3/ I've read there is a delta mode for selection. If we change value of reference field in a document which was already selected, will it be selected again in the delta or only new documents will be included?
Thanks in advance.
Best regards,
BenHello Ben,
Re #1: This depends on your specific requirements. The usual approach is to implement either process 001 or process 003 to deal with open items (payables and receivables) and to use process 002 to deal with any accounts that do not have open item management. The main difference between processes 001 and 003 is that in 001 you have one account field while you have 2 fields in 003. If you integrate AR/AP open items into process 001 the standard logic will put customer or vendor number into the account field. If you integrate GL open items into process 003 the standard logic will put the GL account number into the field for customer account. If you do not like the standard logic you can always change it in a BADI implementation
Re #2: The standard logic requires the partner to either be assigned to the customer/vendor/GL account or to be posted in the open item in case of GL open items. For customer and vendor accounts you could change the partner assignment in the master data of the account and then all open items for that account will get the "new" partner assignment during data selection. If the standard logic does not find all the open items you need then you can implement your own logic in BADI method CHANGE_DATA_TABLE_SENDER_SYS to add these open items to ICR. For process 002 the documents that are included in ICR depends mainly on your ledger selection in the sender system. However, here the partner assignment also has to be available for correct processing in ICR. You could use an exit implementation for the field movement to populate the partner during posting to the SL.
Re #3: For open items this is part of the standard logic. For open items all open items are transferred each time you run data selection meaning that any changes to the original document will be copied into ICR. For process 002 document changes are not taken into account. Only newly posted documents are transferred. However, you could delete and retransfer the data. But this would result in loss of manual assignments.
Best regards,
Ralph -
ICR Process 002: ledger selection
Dear experts,
We are running on ECC6 and trying to implement Intercompany reconciliation process 002. We already have successfully implemented process 001 and 003. All the data that need to be reconciled are in the same system and on the same client (ie all the company codes are running on SAP ECC6)
The problem is that everytime we launch the transaction FBICS2, no data is selected (or reselected), even though there are data to reconcile. Message: "No data selected according to the specified restrictions".
My question:
- what do I need to customize as sending ledger and receiving ledger ? Should it be the same ledger ?
- do i really need to create a SL ledger for this process ? If yes do i need to set up transfer operations ?
- what could be the cause of my problem ?
My customizing is as follows: in FBIC009, local company code activated, Data source is current process, Data transfer type is Asynchrnous via direct RFC, Sender field for reference and alternative sender field are blank.
Thanks in advance.
StevenHello Steven,
Sorry that it took me so long to answer...
Re #1 Yes, you have to run FBICA2 in order to have documents visible in FBICR2.
Re #2 GCU1N takes ledger selection into account. The program basically simulates posting of the document. So if a line is posted to your ledger during GCU1N it would also be posted when using FB01 etc.
Re #3 You can set up matrix reconciliation.
Add Segment and Partner Segment as fields with availability "Totals Items: Subassignment" (transaction FBIC006).
Then maintain the field catalog and choose role Secondary OrgUnit for Segment and Secondary Partner Unit for Partner Segment (transaction FBRC008).
Finally you have to choose option Use Primary and Secondary OrgUnits and Partner Units in Hierarchy Display in IMG activity Set Up Reconciliation Display (transaction FBRC003).
The hierarchy in FBICR* will look like this:
Company 1 - Segment A
Partner 1 - Segment B
Partner 2 - Segment A
Partner 2 - Segment B
Company 1 - Segment B
Partner 1 - Segment A
Partner 2 - Segment A
Partner 2 - Segment B
Best regards,
Ralph -
How do I define Field-Catalog and Event-Catalog in OOPs ALV
Hi All,
This is the piece of the code on which I'm working upon. This program is giving an exception "No Field-Catalog Found".
I'm new to OOPs ALV. Could anybody please tell me how to define the field-catalog and event-catalog in this.
module PBO output.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container EXPORTING CONTAINER_NAME = 'CCCONTAINER'.
CREATE OBJECT g_grid EXPORTING I_PARENT = g_custom_container.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING I_STRUCTURE_NAME = 'IT_MATERIAL'
is_layout = layout
CHANGING IT_OUTTAB = gt_it_material.
ENDIF.
endmodule.
Regards,
Saurabhhi,
chk this sampl ceode.
TYPE-POOLS: slis.
CLASS lcl_event_receiver DEFINITION DEFERRED.
TABLES : zmpets_shipactiv, zmpets_chargebk, zmpets_shiphdr.
DATA : BEGIN OF int_crb OCCURS 0,
sel TYPE char1,
icon TYPE icon_d,
pernr LIKE zmpets_cil-pernr,
vorna LIKE pa0002-vorna,
movreason LIKE zmpets_shiphdr-movreason,
shipdocnum LIKE zmpets_chargebk-shipdocnum,
createdon LIKE zmpets_chargebk-createdon,
chargeamount LIKE zmpets_chargebk-chargeamount,
version LIKE zmpets_shipactiv-version,
activity LIKE zmpets_shipactiv-activity,
vendor LIKE zmpets_shiphdr-vendor,
smtp_addr LIKE adr6-smtp_addr,
empperid LIKE zmpets_167doc-empperid,
celltab TYPE lvc_t_styl,
END OF int_crb.
DATA : int_crb_ver LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_crb_mail LIKE int_crb OCCURS 0 WITH HEADER LINE.
DATA : int_shipactiv LIKE zmpets_shipactiv OCCURS 0 WITH HEADER LINE.
DATA: gt_fieldcatalog TYPE lvc_t_fcat.
DATA : wf_flag TYPE i.
DATA : wf_res TYPE c.
DATA : wf_tabix TYPE sy-tabix.
DATA: BEGIN OF int_sin OCCURS 0,
shipdocnum LIKE zmpets_chargebk-shipdocnum,
shipdocnum LIKE zmpets_shipactiv-petsdocnumber,
END OF int_sin.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA l_num(3).
DATA: ok_code LIKE sy-ucomm,
w_repid LIKE sy-repid,
wl_sno TYPE i VALUE 0,
w_max TYPE i VALUE 100,
wf_layout TYPE lvc_s_layo,
cont_on_main TYPE scrfname VALUE 'GRID_CONTROL',
cont_on_dialog TYPE scrfname VALUE 'GRID_CONTROL',
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
custom_container1 TYPE REF TO cl_gui_custom_container,
custom_container2 TYPE REF TO cl_gui_custom_container,
event_receiver TYPE REF TO lcl_event_receiver,
lt_exclude TYPE ui_functions,
ls_celltab TYPE lvc_s_styl,
lt_celltab TYPE lvc_t_styl.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-001.
PARAMETERS : p_cash AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b3.
PERFORM fieldcatalog_init USING gt_fieldcatalog[].
Selection-Screen----
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
SELECT-OPTIONS:s_chdate FOR zmpets_chargebk-createdon,
s_pernr FOR zmpets_shiphdr-pernr,
s_mvrsn FOR zmpets_shiphdr-movreason,
s_sin FOR zmpets_chargebk-shipdocnum NO INTERVALS
NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM f_clear_fields.
CALL SCREEN 100.
CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
§ 2.In event handler method for event TOOLBAR: Append own functions
by using event parameter E_OBJECT.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
new button -
MOVE 'PROCESSED' TO ls_toolbar-function.
MOVE icon_execute_object TO ls_toolbar-icon.
MOVE 'Process the Record'(110) TO ls_toolbar-quickinfo.
MOVE ' Process '(200) TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
§ 3.In event handler method for event USER_COMMAND: Query your
function codes defined in step 2 and react accordingly.
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'PROCESSED'.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
defaultoption = 'N'
textline1 = 'Do you want to process the selected documents?'
TEXTLINE2 = ' '
titel = 'Process Documents'
START_COLUMN = 25
START_ROW = 6
CANCEL_DISPLAY = 'X'
IMPORTING
answer = wf_res.
*--IF THE USER CONFIRMS 'YES',
IF wf_res = 'J'.
PERFORM f_modify_activity.
CALL METHOD grid1->refresh_table_display.
PERFORM SENDINGMAIL.
ENDIF.
ENDCASE.
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
MODULE pbo_100 OUTPUT
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
w_repid = sy-repid.
IF custom_container1 IS INITIAL.
*get the data from charge back table
PERFORM select_table_chb.
create a custom container control for our ALV Control
CREATE OBJECT custom_container1
EXPORTING
container_name = cont_on_main
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = w_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT grid1
EXPORTING i_parent = custom_container1.
Set a titlebar for the grid control
wf_layout-grid_title = 'Charge Back'(100).
allow to select multiple lines
wf_layout-sel_mode = 'C'.
wf_layout-stylefname = 'CELLTAB'.
Exclude all edit functions in this example since we do not need them:
PERFORM exclude_tb_functions CHANGING lt_exclude.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = wf_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = lt_exclude
IT_HYPERLINK =
IT_ALV_GRAPHICS =
CHANGING
it_outtab = int_crb[]
it_fieldcatalog = gt_fieldcatalog.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF. "IF grid1 IS INITIAL
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. "pbo_100 OUTPUT
MODULE pai_100 INPUT
MODULE pai_100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
PERFORM f_clear_fields.
LEAVE PROGRAM.
WHEN 'CANCEL'.
PERFORM f_clear_fields.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
PERFORM f_clear_fields.
LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE. "pai_100 INPUT
**& Form select_table_chb
text
FORM select_table_chb.
IF p_cash = 'X'.
*Consider the pending documents also.
*get the documents which are not processed yet,
*Doctype -> 06 = Charge Back document type.
SELECT zmpets_shiphdrpernr pa0002vorna
zmpets_shiphdrmovreason zmpets_chargebkshipdocnum
zmpets_chargebkcreatedon zmpets_chargebkchargeamount
zmpets_shipactivversion zmpets_shipactivactivity
zmpets_shiphdr~vendor
adr6~smtp_addr
zmpets_167doc~empperid
INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
FROM zmpets_chargebk
JOIN zmpets_shiphdr
ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
JOIN zmpets_shipactiv
ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
JOIN pa0002
ON zmpets_shiphdrpernr = pa0002pernr
JOIN lfa1
ON lfa1lifnr = zmpets_shiphdrvendor
JOIN adr6
ON adr6addrnumber = lfa1adrnr
JOIN zmpets_167doc
ON zmpets_167docpernr = pa0002pernr
WHERE zmpets_shipactiv~doctype = '06'
zmpets_shipactiv~activity NE '30'
ZMPETS_CHARGEBK~CREATEDON IN s_chdate
AND ZMPETS_SHIPHDR~pernr IN s_pernr
AND ZMPETS_SHIPHDR~MOVREASON IN s_mvrsn
AND ZMPETS_CHARGEBK~SHIPDOCNUM IN s_sin
AND zmpets_chargebk~loekz NE 'X'
AND zmpets_shipactiv~loekz NE 'X'
AND zmpets_shiphdr~loekz NE 'X'.
IF sy-subrc <> 0.
*Message is 'No Pending Documents Available.'.
MESSAGE s196(zm050).
ELSE.
LOOP AT int_crb_ver.
*Not yet processed. set to red
int_crb_ver-icon = '@0A@'.
MODIFY int_crb_ver.
ENDLOOP.
PERFORM f_filter_data_pending.
ENDIF.
ELSE.
*Get the document details from pa0002,zmpets_shipactiv,ZMPETS_CHARGEBK
*table.
*Consider document type as '01' during the selection.
*Doctype -> 06 = Charge Back document type.
SELECT zmpets_shiphdrpernr pa0002vorna zmpets_shiphdr~movreason
zmpets_chargebkshipdocnum zmpets_chargebkcreatedon
zmpets_chargebkchargeamount zmpets_shipactivversion
zmpets_shipactivactivity zmpets_shiphdrvendor
*adr6~smtp_addr
zmpets_167doc~empperid
INTO CORRESPONDING FIELDS OF TABLE int_crb_ver
FROM zmpets_chargebk
JOIN zmpets_shiphdr
ON zmpets_chargebkshipdocnum = zmpets_shiphdrshipdocno
JOIN zmpets_shipactiv
ON zmpets_chargebkshipdocnum = zmpets_shipactivpetsdocnumber
JOIN pa0002
ON zmpets_shiphdrpernr = pa0002pernr
JOIN lfa1
ON lfa1lifnr = zmpets_shiphdrvendor
JOIN adr6
ON adr6addrnumber = lfa1adrnr
JOIN zmpets_167doc
ON zmpets_167docpernr = pa0002pernr
WHERE zmpets_chargebk~createdon IN s_chdate
AND zmpets_shiphdr~pernr IN s_pernr
AND zmpets_shiphdr~movreason IN s_mvrsn
AND zmpets_chargebk~shipdocnum IN s_sin
AND zmpets_shipactiv~activity NE '30'
AND zmpets_shipactiv~doctype = '06'
AND zmpets_chargebk~loekz NE 'X'
AND zmpets_shipactiv~loekz NE 'X'
AND zmpets_shiphdr~loekz NE 'X'.
IF sy-subrc <> 0.
*Message is 'No Charge Back Documents Available.'.
MESSAGE s201(zm050).
ELSE.
PERFORM f_filter_data.
ENDIF.
ENDIF.
ENDFORM. "select_table_chb
*& Form UPDATE_RECORDS
text
--> p1 text
<-- p2 text
FORM update_records TABLES p_et_index_rows
STRUCTURE lvc_s_row.
DATA: ls_selected_line LIKE lvc_s_row,
lf_row_index TYPE lvc_index.
LOOP AT p_et_index_rows INTO ls_selected_line.
lf_row_index = ls_selected_line-index.
ENDLOOP.
ENDFORM. " UPDATE_RECORDS
**& Form fieldcatalog_init
text
-->P_GT_FIELDCATALOG[] text
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat.
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SEL'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'C'.
ls_fieldcatalog-col_pos = 1.
ls_fieldcatalog-edit = 'X'.
ls_fieldcatalog-reptext = 'Select for Processing'.
ls_fieldcatalog-coltext = 'Select for Processing'.
ls_fieldcatalog-seltext = 'Select for Processing'.
ls_fieldcatalog-tooltip = 'Select for Processing'.
ls_fieldcatalog-checkbox = 'X'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ICON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'CHAR'.
ls_fieldcatalog-col_pos = 2.
ls_fieldcatalog-intlen = '4'.
ls_fieldcatalog-reptext = 'Status'.
ls_fieldcatalog-coltext = 'Status'.
ls_fieldcatalog-seltext = 'Status'.
ls_fieldcatalog-tooltip = 'Status'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'PERNR'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-col_pos = 2.
ls_fieldcatalog-intlen = '8'.
ls_fieldcatalog-reptext = 'Employee Number'.
ls_fieldcatalog-coltext = 'Employee Number'.
ls_fieldcatalog-seltext = 'Employee Number'.
ls_fieldcatalog-tooltip = 'Employee Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'VORNA'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 3 .
ls_fieldcatalog-datatype = 'CHAR'.
ls_fieldcatalog-outputlen = '20'.
ls_fieldcatalog-reptext = 'Employee Name'.
ls_fieldcatalog-coltext = 'Employee Name'.
ls_fieldcatalog-seltext = 'Employee Name'.
ls_fieldcatalog-tooltip = 'Employee Name'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MOVREASON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 4.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-reptext = 'Move Reason'.
ls_fieldcatalog-coltext = 'Move Reason'.
ls_fieldcatalog-seltext = 'Move Reason'.
ls_fieldcatalog-tooltip = 'Move Reason'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'SHIPDOCNUM'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-datatype = 'NUMC'.
ls_fieldcatalog-outputlen = '10'.
ls_fieldcatalog-col_pos = 5.
ls_fieldcatalog-reptext = 'Shipping Document Number'.
ls_fieldcatalog-coltext = 'Shipping Document Number'.
ls_fieldcatalog-seltext = 'Shipping Document Number'.
ls_fieldcatalog-tooltip = 'Shipping Document Number'.
ls_fieldcatalog-key = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CREATEDON'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 6.
ls_fieldcatalog-datatype = 'DATS'.
ls_fieldcatalog-outputlen = '8'.
ls_fieldcatalog-reptext = 'Created On'.
ls_fieldcatalog-coltext = 'Created On'.
ls_fieldcatalog-seltext = 'Created On'.
ls_fieldcatalog-tooltip = 'Created On'.
ls_fieldcatalog-DO_sum = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'CHARGEAMOUNT'.
ls_fieldcatalog-tabname = 'INT_CRB'.
ls_fieldcatalog-col_pos = 7.
ls_fieldcatalog-datatype = 'CURR'.
ls_fieldcatalog-outputlen = '13'.
ls_fieldcatalog-reptext = 'Charge Back Amount'.
ls_fieldcatalog-coltext = 'Charge Back Amount'.
ls_fieldcatalog-seltext = 'Charge Back Amount'.
ls_fieldcatalog-tooltip = 'Charge Back Amount'.
ls_fieldcatalog-DO_sum = 'X'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
CLEAR ls_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form f_modify_activity
Modify the activity to 79 in zmpets_shipaciv table.
--> p1 text
<-- p2 text
FORM f_modify_activity .
REFRESH int_crb_mail.
int_crb_mail[] = int_crb[].
*All the document number which is to be processed is stored in
*the internel table 'INT_SIN'.
LOOP AT int_crb INTO int_crb.
IF int_crb-sel ='X'.
MOVE int_crb-shipdocnum TO int_sin.
APPEND int_sin.
CLEAR int_sin.
*Removing the processed documents.
DELETE int_crb.
ENDIF.
CLEAR int_crb.
ENDLOOP.
*Get the details from shipactiv table.
IF int_sin[] IS NOT INITIAL.
SELECT * FROM zmpets_shipactiv
INTO TABLE int_shipactiv
FOR ALL ENTRIES IN int_sin
WHERE petsdocnumber = int_sin-shipdocnum.
*Modify the activity code, version, actual date and last changed date.
SORT int_shipactiv BY petsdocnumber version DESCENDING.
CLEAR wf_tabix.
LOOP AT int_shipactiv.
wf_tabix = sy-tabix.
AT NEW petsdocnumber.
READ TABLE int_shipactiv INDEX wf_tabix.
int_shipactiv-activity = '030'.
int_shipactiv-version = int_shipactiv-version + 1.
int_shipactiv-actdate = sy-datum.
int_shipactiv-lastchangedby = sy-uname.
int_shipactiv-lastchangedt = sy-datum.
*Modify the data base table
MODIFY zmpets_shipactiv FROM int_shipactiv.
ENDAT.
CLEAR int_shipactiv.
AT LAST.
*Message is 'Data Processed Successfully.'.
MESSAGE s203(zm050).
ENDAT.
ENDLOOP.
*-send mail to the vendor and employee that the shipment is cleared for
LOOP AT int_crb_mail WHERE sel = 'X'.
PERFORM f_send_mail.
ENDLOOP.
REFRESH int_crb_mail.
CALL SELECTION-SCREEN 1000.
ELSE.
*Message is 'No Data Selected for Processing.'.
MESSAGE s200(zm050).
ENDIF.
ENDFORM. " f_modify_activity
*& Form f_clear_fields
text
--> p1 text
<-- p2 text
FORM f_clear_fields .
CLEAR int_crb.
CLEAR int_crb_ver.
CLEAR int_sin.
REFRESH int_crb.
REFRESH int_crb_ver.
REFRESH int_sin.
CLEAR int_shipactiv.
REFRESH int_shipactiv.
CLEAR wf_flag.
CLEAR wf_tabix.
ENDFORM. " f_clear_fields
*& Form f_filter_data
text
--> p1 text
<-- p2 text
FORM f_filter_data .
*Take the latest Version Data.
*take all the activities, including the activity '30'.
then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
wf_tabix = sy-tabix.
AT NEW shipdocnum.
READ TABLE int_crb_ver INDEX wf_tabix.
MOVE-CORRESPONDING int_crb_ver TO int_crb.
APPEND int_crb.
CLEAR int_crb.
ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
MESSAGE s202(zm050).
ELSE.
CLEAR wf_tabix.
LOOP AT int_crb.
wf_tabix = sy-tabix.
REFRESH lt_celltab.
ls_celltab-fieldname = 'SEL'.
IF int_crb-activity = '030'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
*status becomes green. ie processed
int_crb-icon = '@08@'. "Green
ELSE.
ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
*status set to red. ie not yet processed
int_crb-icon = '@0A@'. "Red
ENDIF.
INSERT ls_celltab INTO TABLE lt_celltab.
INSERT LINES OF lt_celltab INTO TABLE int_crb-celltab.
MODIFY int_crb INDEX wf_tabix.
ENDLOOP.
ENDIF.
ENDFORM. " f_filter_data
*& Form f_filter_data
text
--> p1 text
<-- p2 text
FORM f_filter_data_pending.
*Take the latest Version Data.
*take all the activities, including the activity '30'.
*then filter it with out the activities '30' and having the lastest
*version. then put the details in internal table 'INT_CRB'.
SORT int_crb_ver BY shipdocnum version DESCENDING.
CLEAR wf_tabix.
CLEAR int_crb.
REFRESH int_crb.
LOOP AT int_crb_ver.
wf_tabix = sy-tabix.
AT NEW shipdocnum.
READ TABLE int_crb_ver INDEX wf_tabix.
IF int_crb_ver-activity NE '030'.
MOVE-CORRESPONDING int_crb_ver TO int_crb.
APPEND int_crb.
CLEAR int_crb.
ENDIF.
ENDAT.
ENDLOOP.
IF int_crb[] IS INITIAL.
*Message is 'No Records Available.'.
MESSAGE s202(zm050).
ENDIF.
ENDFORM. " f_filter_data_pending
*& Form EXCLUDE_TB_FUNCTIONS
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = 'anversha.shahul@'."int_crb_mail-smtp_addr
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
rgds
anver
pls mark hlpful answers -
Hi,
I am trying to display data from two different tables, say 3 fields from one table and 3 fields from other table. in alv grid format using classes and using method CALL METHOD go_grid->set_table_for_first_display
how can we build the field catalog for the internal table which consists of 6 fields from two different tables
thanks in advanceHello,
Please check,it is similar case.
FORM set_grid.
IF g_r_grid IS INITIAL.
CREATE OBJECT g_r_cont
EXPORTING container_name = 'CUST1'.
CREATE OBJECT g_r_grid
EXPORTING i_parent = g_r_cont.
g_r_variant = sy-repid.
Build Field Catalog
PERFORM build_field_catalog.
Exclude process options from ALV
PERFORM alv_excl.
setting ALV Grid layout
PERFORM alv_layo.
CALL METHOD g_r_grid->set_table_for_first_display
EXPORTING
is_layout = g_r_layo
is_variant = g_r_variant
it_toolbar_excluding = g_r_excl
i_save = 'X'
CHANGING
it_outtab = g_t_alv[]
it_fieldcatalog = g_t_fieldcat.
ENDIF.
ENDFORM. " set_grid
*Form Routine ID : build_field_catalog
*Form Routine Name : TO Build Field Catalog
*Outline : Subroutine for building the field catalog
*Argument : None
*Return Value : None
FORM build_field_catalog.
DATA : l_f_n TYPE i.
REFRESH g_t_fieldcat.
l_f_n = 0.
Add properties values to ALV Catalog
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MATNR' 'CHAR' l_f_n
text-001 'X' space ' ' 18 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'TXZ01' 'CHAR' l_f_n
text-002 'X' space 'X' 40 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MFRPN' 'CHAR' l_f_n
text-003 ' ' space ' ' 40 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EBELN' 'CHAR' l_f_n
text-004 space space ' ' 10 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EBELP' 'NUMC' l_f_n
text-005 space space ' ' 5 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EINDT' 'DATS' l_f_n
text-006 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MENGE' 'QUAN' l_f_n
text-007 space space ' ' 13 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MEINS' 'UNIT' l_f_n
text-008 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MENGE1' 'QUAN' l_f_n
text-009 space space ' ' 13 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MEINS1' 'UNIT' l_f_n
text-010 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LIFNR' 'CHAR' l_f_n
text-011 space space ' ' 10 'ALPHA'.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'NAME1' 'CHAR' l_f_n
text-012 space space 'X' 35 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BSART' 'CHAR' l_f_n
text-013 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BEDAT' 'DATS' l_f_n
text-014 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'AEDAT' 'DATS' l_f_n
text-015 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'INSMK' 'CHAR' l_f_n
text-016 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'WERKS' 'CHAR' l_f_n
text-017 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LGORT' 'CHAR' l_f_n
text-018 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EKGRP' 'CHAR' l_f_n
text-019 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PSTYP' 'CHAR' l_f_n
text-020 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LOEKZ' 'CHAR' l_f_n
text-021 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'DISPO' 'CHAR' l_f_n
text-022 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PO_TEXT' 'CHAR' l_f_n
text-023 space space 'X' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BSGRU' 'CHAR' l_f_n
text-024 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA1' 'CHAR' l_f_n
text-025 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT1' 'CHAR' l_f_n
text-026 space space 'X' 40 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA2' 'CHAR' l_f_n
text-027 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT2' 'CHAR' l_f_n
text-028 space space 'X' 40 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA3' 'CHAR' l_f_n
text-029 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT3' 'CHAR' l_f_n
text-030 space space 'X' 40 ' '.
ENDFORM. " build_field_catalog
*Form Routine ID : add_catalog
*Form Routine Name : To Add the Catalog for the ALV
*Outline : Subroutine to add properties values to ALV Catalog
*Argument : p_fname "Field Name
p_inttype "Intenal Type
p_col_pos "Column Position
p_coltext "Column Text
p_key "Key Field
p_hotspot "Hotspot Enabled
p_outlen "Internal Length
p_convexit "conversion exit name
*Return Value : g_t_fieldcat "Field Catalog Table
FORM add_catalog USING p_fname
p_inttype
p_col_pos
p_col_text
p_key
p_hotspot
p_lowercase
p_outlen
p_convexit.
CLEAR g_r_fieldcat.
g_r_fieldcat-fieldname = p_fname.
g_r_fieldcat-inttype = p_inttype.
g_r_fieldcat-col_pos = p_col_pos.
g_r_fieldcat-coltext = p_col_text.
g_r_fieldcat-hotspot = p_hotspot.
g_r_fieldcat-lowercase = p_lowercase.
g_r_fieldcat-outputlen = p_outlen.
g_r_fieldcat-key = p_key.
g_r_fieldcat-convexit = p_convexit.
APPEND g_r_fieldcat TO g_t_fieldcat.
ENDFORM. " add_catalog
*Form Routine ID : alv_excl
*Form Routine Name : ALV Exclude List
*Outline : Subroutine to exclude process options from ALV
*Argument : None
*Return Value : None
FORM alv_excl.
APPEND cl_gui_alv_grid=>mc_mb_sum TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_mb_subtot TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_graph TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_info TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_print_back TO g_r_excl.
ENDFORM. " alv_excl
*Form Routine ID : alv_layo
*Form Routine Name : alv_layo
*Outline : Subroutine to set alv layout
*Argument : None
*Return Value : None
FORM alv_layo.
g_r_layo-grid_title = text-100.
g_r_layo-cwidth_opt = g_c_mark.
g_r_layo-zebra = g_c_mark.
g_r_layo-no_rowmark = space.
g_r_layo-sel_mode = g_c_selmode.
ENDFORM.
Regards -
Hi Friends,
Please help me out, I am new to ABAP.
Please anybody explain me the functionality of Field catalogs in ALVs?
How many methods are there to pass data to ALVs, i.e., in how many ways?
Hope u will help me.hi,
this will be very helpful for ALV REPORTING.....
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
The different steps used for getting the above function modules into use are:
Step 1
DATA DECLARATION
Sap standard type pools: SLIS , KKBLO .
Sap standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,
SLIS_T_FIELDCAT_ALV,
SLIS_T_LISTHEADER,
SLIS_T_EVENT,
SLIS_SELFIELD.
Internal tables to used in the program declared based on the above table types
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
I_HEADING TYPE SLIS_T_LISTHEADER,
I_EVENTS TYPE SLIS_T_EVENT.
TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.
Step 2 (Optional)
SELECTING THE VARIANTS FOR INITIAL LIST DISPLAY (DEFAULT VARIANT)
The variants in the list display can be both user-specific and general. The user can programmatically set the initial (default) variant for list display.
The default variant can be found using the function module 'REUSE_ALV_VARIANT_DEFAULT_GET'.
Sample code:
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = variant save condition ( A=all, U = user-specific )
CHANGING
cs_variant = internal table containing the program name (and the default variant---optional )
EXCEPTIONS
not_found = 2.
The user can also choose from the list of existing variants using the function module REUSE_ALV_VARIANT_F4.
Step 3
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
1. The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE. In this case the attributes of the different fields is taken directly from the table and the attributes (key fields, length, texts etc) need to state explicitly.
2. all fields in this structure are to be output
3. The structure name is passed to ALV in the parameter I_STRUCTURE_NAME of the function module REUSE_ALV_LIST_DISPLAY.
All the values entered in the catalog is specific to the particular field whose name is entered in the fieldname FIELDNAME of the fieldcat structure. The name of the table is also entered in the corr. Fieldname TABNAME of the structure.
The different possible attributes are:
Row_pos (row position): Only relevant if the list output is to be multi-line (two or three lines) by default. So, this attribute can be used maintain certain level of alignment in the output.
Value set: 0, 1 3
Col_pos (column position): This parameter is relevant when the fields in the output are to be different from the sequence of the fields in the internal table used for display. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the internal table field sequence.
Value set: 0, 1 60
Fieldname (field name): This is the name of the internal table field for which the parameters are passed in the catalog.
Value set: internal output table field name (required parameter)
Tabname (internal output table): Name of the internal output table that contains the field FIELDCAT-FIELDNAME above.
Value set: SPACE, internal output table name.
Ref_fieldname (reference field name): Name of the Data Dictionary field referred to. This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
Value set: SPACE, Data Dictionary field name.
Ref_tabname (reference table/structure field name): Structure or table name of the referred Data Dictionary field. This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Value set: SPACE, name of a Data Dictionary structure or table
Link to currency unit
Cfieldname (currency unit field name): This is used for currency fields that have a reference to any unit field. This is only relevant for amount columns with associated unit. This parameter contains the Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name
Ctabname (internal currency unit field output table): Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Value set: SPACE, output table field name.
Link to measurement unit
Qfieldname (measurement unit field name): Only relevant for quantity columns with unit link. Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME. The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name.
Qtabname (internal measurement unit field output table): Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Value set: SPACE, output table field name.
Outputlen (column width): This parameter is used if the desired output length for a field is desired to be different from the internal output table field. For fields with a Data Dictionary link this parameter can be left initial. For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
Initial = column width is the output length of the referred Data Dictionary field (domain).
N = column width is n characters.
Value set: 0 (initial), n.
Key (key column): By default, the system makes some fields in the output as key fields, provided the fields are key fields in their referencing table. Using this parameter, fields other than key fields of the referencing table can be made key field. This parameter is most important if the output needs to contain some field which are not scrollable or cannot be hidden.
If the internal output table contains fields that are key fields from different tables, then all those fields in the report output becomes unscrollable and cannot be hidden. So, the fields in the output internal table should not be referenced from tables in which they are key fields. Instead, they should be referenced to the tables in which they are not key fields, incase they are not desired as key field in the output.
'X' = key field (key field output in color) and Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
Value set: SPACE, 'X'.
Key_sel (hideable key column): This parameter is only relevant for the fields which are made key fields using FIELDCAT-KEY = 'X'. Using this parameter the Key field can be hidden interactively.
The key column sequence cannot be changed interactively by the user. The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
Value set: SPACE, 'X'.
No_out (field in field list): This parameter is used to remove certain fields from the output during initial display. The user can however interactively choose the field for output from the field list in the display variant.
'X' = field is not displayed in the current list.
Value set: SPACE, 'X'.
Tech (technical field): This parameter is used to make certain field display only in the field catalog. The fields with this parameter set cannot be output in the list nor can they be displayed interactively from the catalog.
'X' = technical field.
Value set: SPACE, 'X'.
Emphasize (highlight columns in color): As name suggests, this field parameter is used to highlight certain field with chosen colors.
Value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off ,'1'=on).
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
- C: Color (coding must begin with C)
- X: color number
- Y: bold
- Z: inverse
Hotspot (column as hotspot): This parameter is used to make certain field appear as hotspot i.e. a hand is displayed if the cursor is positioned on the field value. Single click on such fields cause the PICK OR F2 events to happen.
Value set: SPACE, 'X'.
'X' = column cells are output as hotspots.
Fix_column (fix column): This parameter is used to fix certain columns in the output. All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively.
Value set: SPACE, 'X'.
'X' = column fixed (does not scroll horizontally).
Do_sum (sum over column): the user can also call this function interactively.
Value set: SPACE, 'X'.
'X' = a sum is calculated over this internal output table field.
No_sum (sums forbidden): No sum can be calculated over this field, although the data type of the field would allow summing.
Value set: SPACE, 'X'.
Icon: The parameter displays certain column contents as icons. The internal output table column contents must be valid icon strings.
Value set: SPACE, 'X'.
'X' = column contents to be output as an icon.
Symbol: The internal output table column must be a valid symbol character.
Value set: SPACE, 'X'
'X' = column contents are to be output as a symbol.
Just (justification): This parameter is used for alignment of the contents of the output table. This is only relevant for CHAR or NUMC fields in the output internal table. The justification of the column header always follows the justification of the columns. Independent justification of the column header is not possible.
Value set: SPACE, 'R', 'L', and C.
' ' = Default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output.
Lzero (leading zeros): By default ALV outputs NUMC fields right-justified without leading zeros. Using this parameter only the NUMC fields can be displayed with leading zeroes.
Value set: SPACE, 'X'.
'X' = output with leading zeros.
No_sign (no +/- sign): This parameter is used to suppress the signs of the output fields. It is only relevant for the value fields.
Value set: SPACE, 'X'.
'X' = value output without +/ sign.
No_zero (suppress zeros): Only relevant for value fields.
Value set: SPACE, 'X'.
'X' = suppress zeros.
Edit_mask (field formatting): To apply the report output formatting options same as in the WRITE statement in report writing.
Value set: SPACE, template.
The following parameters are used for customizing the texts in the heading of the output of the columns. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored.
If the user changes the column width interactively, the column header text with the appropriate length is always used.
The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition,
Sort, etc. Popup.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic(header) Analogous to the Data element main header
Ddictxt (specify text) : You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Value set: SPACE, 'L', 'M', and S.
Sample code:
Suppose I_PO_DETAILS is an internal table containing two fields EBELN (PO number) and EBELP (PO item no).
DATA: L_FIELDCAT TYPE SLIS_FIELDCAT_ALV. Local variable to hold the parameters
for a particular field of the field catalog
CLEAR L_FIELDCAT.
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The PO no is made the key field,
Colored and non scrollable
L_FIELDCAT-HOTSPOT = 'X'. The po no becomes a hotspot
L_FIELDCAT-SELTEXT_S = P.O No.
L_FIELDCAT-SELTEXT_M = 'P order No'.
L_FIELDCAT-SELTEXT_L = 'Purchase order No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The po item no is made the key field,
Colored and non scrollable
L_FIELDCAT-SELTEXT_S = 'Item No'.
L_FIELDCAT-SELTEXT_M = 'Item No`.
L_FIELDCAT-SELTEXT_L = 'PO Item No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
Thus the catalog for the report output is prepared.
Step 4
The next step is to build an event table, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.
A list of possible events is populated into an event table (I_EVENTS) when this table is passed to the function module REUSE_ALV_EVENT_NAMES_GET. The return table from this function module contains all the possible events.
The function module contains following import and export parameters.
IMPORTING PARAMETERS: I_LIST_TYPE
This parameter has possible values from 0-4.
The parameter I_LIST_TYPE is of TYPE SLIS_LIST_TYPE and is DEFAULT 0 .
EXPORTING PARAMETERS: I_EVENTS table.
This table is of TYPE SLIS_T_EVENT and returns to the program the name of all the possible events.
The table structure contains the fields:
I_EVENTS-NAME: Name of the Callback event.
I_EVENTS-FORM: Name of the form routine that should be called in the calling program at the event.
Only events with a form routine name are processed.
The I_EVENTS table returns with the following possible constants:
1. Slis_ev_item_data_expand TYPE slis_formname VALUE 'ITEM_DATA_EXPAND'.
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT. Exit for passing item entries (ITEM table) for a header record that was expanded interactively by the user.
2. Slis_ev_reprep_sel_modify TYPE slis_formname VALUE 'REPREP_SEL_MODIFY'.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header that is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table.
RS_SELFIELD is initial in this case.
3. Slis_ev_caller_exit_at_start TYPE slis_formname VALUE 'CALLER_EXIT'.
Is called at the beginning of the function module to make special settings. It is not usually used.
4. Slis_ev_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface by passing the user command in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
5. Slis_ev_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
Equivalent to the list processing TOP-OF-PAGE event.
6. Slis_ev_top_of_coverpage TYPE slis_formname VALUE 'TOP_OF_COVERPAGE'.
The selection information and list status are output together (if they exist) on a separate page by default
7. Slis_ev_end_of_coverpage TYPE slis_formname VALUE 'END_OF_COVERPAGE'.
Analogously to TOP_OF_COVERPAGE the user can add other information
to the information output by ALV (selection information, list status) at this event.
8. Slis_ev_foreign_top_of_page TYPE slis_formname VALUE FOREIGN_TOP_OF_PAGE'.
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
9. Slis_ev_foreign_end_of_page TYPE slis_formname VALUE 'FOREIGN_END_OF_PAGE'.
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
10. Slis_ev_pf_status_set TYPE slis_formname VALUE 'PF_STATUS_SET'.
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status. As this is a frequently used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
11. Slis_ev_list_modify TYPE slis_formname VALUE 'LIST_MODIFY'.
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX.
12. Slis_ev_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST'.
Information output at the start of the list
13. Slis_ev_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
Information output at the end of a page. This is only called for printing.
14. Slis_ev_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
Information output at the end of the list
15. Slis_ev_after_line_output TYPE slis_formname VALUE 'AFTER_LINE_OUTPUT'.
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
16. Slis_ev_before_line_output TYPE slis_formname VALUE 'BEFORE_LINE_OUTPUT'.
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
17. Slis_ev_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
This event table (I_EVENTS) is now checked with the desired constants. If the desired constant is found, then the corresponding field for the FORM NAME is populated with the name of the routine containing the corresponding event.
Sample code :
FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE', FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: L_I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
CLEAR L_I_EVENT.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_USER_COMMAND TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
This will prepare the events table for the report.
The report will contain three forms for the above events:
1. FORM TOP_OF_PAGE : This form will contain the top of page event for the report i.e header etc
Using the function module REUSE_ALV_COMMENTARY_WRITE, the internal table containing the headings for top of page event can be passed to the list output. Also, any logo specific to the report can be passed to the function module.
2. FORM END_OF_PAGE : This form will contain the end of page event for the report i.e footer etc
3. FORM USER_COMMAND : This form will contain the desired user command i.e pick/line selection
Step 5
A layout is build for the report output list description USING the internal table declared above (I_LAYOUT).
Output list description structure.
The parameters are described under the following heads:
Display options
Exceptions
Totals
Interaction
Detail screen
Display variants (only for hierarchical-sequential lists)
Color
Other
The layout table is of type slis_layout_alv_spec and has the following fields:
Display options
1. Colwidth_optimize (1) TYPE c: This parameter optimizes the length of the different columns in the output. The width of the different col. now depends on the max. Length of the data in the column.
Value set: SPACE, 'X'
'X' = optimizes the column width so that all contents are displayed completely.
2. No_colhead(1) TYPE c : This parameter suppresses the column headings
Value set: SPACE, 'X'.
'X' = column headers are not output
3. No_hotspot(1) TYPE c : The heading of the report output are not output as hotspot.
Value set: SPACE, 'X'.
'X' = column headers are not output as hotspot
4. Zebra(1) TYPE c : The report is output in the striped pattern.
Value set: SPACE, 'X'.
'X' = striped pattern (e.g. for wide lists)
5. No_vline(1) TYPE c : The report output contains columns only separated by space and no lines. It is not relevant for: hierarchical-sequential lists and multiple-line lists.
Value set: SPACE, 'X'.
'X' = columns separated by SPACE
6. No_min_linesize(1) TYPE c : The report line size is equal to the width of the list. It is not relevant for block lists.
Value set: SPACE, 'X.
'X' = line size depends on list width
' ' = Line size is set to 80 or MIN_LINESIZE (if > 0) .
7. Min_linesize LIKE sy-linsz: The report output contains a minimum possible length of line. If initial min_linesize is set to 80 by default, then this parameter is used to customize it. The prerequisite for this is that the parameter no_min_linesize should be ' '.
Value set: 0, 10 - 250
If the list is wider, the format uses the list width (maximum 250 or MAX_LINESIZE (if > 0)).
8. Max_linesize LIKE sy-linsz: The default max. Linesize is 250. To change this default value, this parameter can interactively-define the maximum list width setting.
Value set: 0, 80 - 1020
9. Window_titlebar LIKE rsmpe-tittext: To set the titlebar on the report output.
10. No_uline_hs(1) TYPE c.
Exceptions
11. Lights_fieldname TYPE slis_fieldname: Internal output table field containing the codes of exceptions to be output.
Output table field code: '1' = red traffic light
'2' = yellow traffic light
'3' = green traffic light Fieldname for exception
Value set: SPACE, internal output table field name.
12. Lights_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter LIGHTS_FIELDNAME. If LIGHTS_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists. Only relevant for hierarchical-sequential lists.
. Value set: SPACE, internal output table name.
13. Lights_rollname LIKE dfies-rollname: The documentation of this data element is displayed when you call F1 help for an exception column.
Value set: SPACE, data element name.
14. Lights_condense(1) TYPE c : If a list record is output with 'red traffic light', each
Subtotal that includes this record is also output with 'red traffic light'.
Value set: SPACE, 'X'
'X' = the 'maximum' exception of the items in the subtotal is output at subtotal level.
Sums
15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
Only by fieldcatalog.
Value set: SPACE, 'X'
'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
Value set: SPACE, 'X'
'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
Value set: SPACE, 'X'
'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
18. No_subtotals(1) TYPE c : No subtotals possible
Value set: SPACE, 'X'
'X' = no subtotals.
19. Numc_sum(1) TYPE c : Totals only possible for NUMC-Fields.
20. No_unit_splitting TYPE c: No separate total lines by inh.units
21.totals_before_items TYPE c: Display totals before the items
22. Totals_only(1) TYPE c : Show only totals
Value set: SPACE, 'X'
'X' = only total records are output.
23. Totals_text(60) TYPE c : Text for 1st col. in totals
Value set: SPACE, string (max.60)
' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
'String = The string passed is output after the total indicated by '*', if the column is wide enough.
24. Subtotals_text(60) TYPE c : Texts for subtotals
Value set: SPACE, string (max.60)
' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
'String = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
Interaction
25. Box_fieldname TYPE slis_fieldname: Fieldname for checkbox in the report output. If the list has checkboxes at the start of records (for selecting several records), this parameter contains the internal output table field name indicated by the checkbox selection column. The field is a checkbox at the start of list records without a list header.
Value set: SPACE, internal output table field name
26. Box_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter BOX_FIELDNAME. If BOX_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists.
Value set: SPACE, internal output table name.
27. Box_rollname LIKE dd03p-rollname: rollname for checkbox
28. Expand_fieldname TYPE slis_fieldname: fieldname flag expand. The user can show or hide the items by clicking on the folder symbol (hotspot). If the items for a header entry are only to be read by the calling program and passed to ALV when a header has been expanded interactively, this can be controlled via the CALLBACK event 'ITEM_DATA_EXPAND'.
29. Hotspot_fieldname TYPE slis_fieldname: Used to make the fieldname flag hotspot.
30. No_input(1) TYPE c : The fields are only display fields.
Value set: SPACE, 'X'
'X' = all ready-for-input fields in a list are displayed as not ready-for-input. (Record selection checkboxes and fields which can be made ready-for-input via the field list parameter FIELDCAT-INPUT = 'X')
31. F2code LIKE sy-ucomm: To assign an ALV standard function code to double-click (F2), assign the function code to this parameter. Ex.: to assign the ALV standard function 'Detail' ('&ETA') to F2.
=> LAYOUT-F2CODE = '&ETA'.
Value set: SPACE, function code
32. Confirmation_prompt: confirm. Prompt when leaving
Value set: SPACE, 'X'
'X' = if one of the functions Back (F03)', Exit (F15)' or Cancel (F12)' occurs, a confirmation prompt appears.
33. Key_hotspot(1) TYPE c : The key fields are displayed as hotspot. The columns defined in the field catalog as key fields (FIELDCAT-KEY = 'X') are output as hotspots, i.e. clicking on a key column (highlighted in color in the list) calls the function under F2.
Value set: SPACE, 'X'.
34. Reprep(1) TYPE c : report report interface active.
35. Group_buttons(1) TYPE c : group-buttons for COL1 - COL5 . Group output fields via FIELDCAT-SP_GROUP in the field list, and pass the group name to the list module in the interface parameter IT_SPECIAL_GROUPS.
Value set: SPACE, 'X'.
36. No_keyfix(1) TYPE c : Used to make the key fields scrollable.
Value set: SPACE, 'X'.
' ' = The key columns defined in the field catalog by FIELDCAT-KEY = 'X' are fixed in the list output. These columns do not scroll horizontally. The item table key columns are fixed in hierarchical-sequential lists. The header table key fields are not considered here.
'X' = key columns not fixed
37. Get_selinfos(1) TYPE c : To read selection screen.
Value set: SPACE, 'X'.
If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.
38. group_change_edit(1) TYPE c : Settings by user for new group
Value set: SPACE, 'X'
'X' = the user can enter a format option for each sort criterion in the sort/subtotal popup, for the list format when this value changes (e.g. new page or underline).
39. No_scrolling(1) TYPE c : Does not allow scrolling of the list to the right.
Value set: SPACE, 'X'.
40. Expand_all(1) TYPE c : Expand all positions
Detailed screen
40. Detail_popup(1) TYPE c : show detail in popup.
Value set: SPACE, 'X'
' ' = List record detail display in full-screen mode, with top-of-page.
'X' = list record detail display in popup (without top-of-page).
41. Detail_initial_lines(1) TYPE c : show also initial lines
Value set: SPACE, 'X'
' ' = Only fields whose contents are not initial are output in the detail view.
'X' = initial field contents are also output in detail.
41. detail_titlebar(30) type c : Titlebar for detail screen
Value set: SPACE, string (max.30)
` ' = ' Detail: Display' is output as the title of the detail window.
'String = the string passed is output as the title of the detail window.
Display variants
42. Header_text (20) TYPE c: Text for header button. Only relevant for hierarchical-sequential lists. You can toggle between display field and field list views via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The header table field pushbutton text is 'Header' by default.
CHAR (20) = header table field pushbutton text.
43.item_text(20) TYPE c : Text for item button. Only relevant for hierarchical-sequential lists. You can toggle the view between the display fields and the field list via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The pushbutton text for the item table fields is 'Item' by default.
CHAR (20) = item table field pushbutton text.
44.default_ item(1) TYPE c : Items as default. Only relevant for hierarchical-sequential lists.
Value set: SPACE, 'X'
' ' = The header table fields are displayed by default in the display variant definition popup. The user can switch to the item table fields interactively.
'X' = the item table fields are displayed by default in the display variant Definition Popup. The user can switch to the header table fields interactively.
Colour
45. Info_fieldname TYPE slis_fieldname: infofield for listoutput. A whole list record can be colored individually using a color code in a column of the internal output table for the record. Assign the name of the field containing the color code to this parameter.
Value set: SPACE, internal output table field name
The internal output table field must be of type CHAR(3).
The code must have the following syntax: 'Cxy':
C = color (all codes must start with 'C')
X = color number ('1'-'9')
Y = bold ('0' = off, '1' = on)
46. Coltab_fieldname TYPE slis_fieldname: Cells can be colored individually using a color code which is contained in a column of the internal output table for the record containing the cell. Assign the name of the field to this parameter.
Others
47. List_append(1) TYPE c : no call screen. It is only useful to output block-lists without specifying the above modules if the number of list blocks exceeds, or may exceed, the maximum number specified in the block module documentation. These operations are not possible for user-defined block lists.
Example code :
I_LAYOUT-f2code = ws_fcode.
I_LAYOUT-zebra = 'X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-no_keyfix = 'X'.
I_LAYOUT-get_selinfos = 'X'.
I_LAYOUT-no_hotspot = 'X'.
I_LAYOUT-no_input = 'X'.
I_LAYOUT-hotspot_fieldname = FIELDNAME.
I_LAYOUT-no_input = X.
I_LAYOUT-no_vline = `X.
I_LAYOUT-no_colhead = .
I_LAYOUT-lights_condense = ` `.
I_LAYOUT-totals_text = ` `.
I_LAYOUT-subtotals_text = ` `.
I_LAYOUT-totals_only = ` `.
I_LAYOUT-key_hotspot = X.
I_LAYOUT-detail_popup = X.
I_LAYOUT-group_change_edit = X.
I_LAYOUT-GROUP_BUTTONS = X.
Step 6
This step is required to get the selection screen information in the report output.
The prerequisite for this is to set the parameter LAYOUT-GET_SELINFOS of the IMPORTING structure.
The parameters to be passed in the IS_SEL_HIDE table are:
o mode: 'R' = only the entries passed in the internal table IS_SEL_HIDE-T_ENTRIES
Are output in the pop up. Selection info, which the list tool read in the selection screen (when called by a report with a selection screen), is replaced by the values passed.
'S' = the selection info which the list tool read in the selection screen of the calling report are modified by the entries in the table IS_SEL_HIDE-T_ENTRIES.
o t_entries: Selection info table
o t_entries-mode: 'A' = output the selection info for the current table record in the info popup.
'D' = do not output select option or SELNAME parameter selection info in the popup.
o t_entries-selname: (only used in t_entries-mode = 'D') : Name of the select option or parameter.
The following table fields are only used in t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection information is to be output.
t_entries-table: DDIC table names of t_entries-field.
t_entries-stext: Field name in info popup.
If t_entries-field and t_entries-table have been entered, this text is taken from DDIC.
t_entries-valuf: Selection condition 'from' value (external format)
t_entries-valut: Selection condition 'to' value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-option: All values of the select options Option field allowed.
Step 6
The Table IT_SORT is populated with the sort criteria for the different fields.
The caller specifies the sorting and/or subtotaling of the basic list in the internal table IT_SORT.
This internal table has the following fields:
o spos : Sort sequence
o fieldname : Internal output table field name
o tabname : Only relevant for hierarchical-sequential lists. Name of the internal output table.
o up : 'X' = sort in ascending order
o down : 'X' = sort in descending order
o subtot : 'X' = subtotal at group value change
o group : '* ' = new page at group value change ,'UL' = underline at group value change
Step 7
The final step in the output of the report is the use of two ALV functions modules.
1. REUSE_ALV_FIELDCATALOG_MERGE
2. REUSE_ALV_LIST_DISPLAY
The first function module is used to pass the field catalog to the report output and merge it with the internal output table.
FUNCTION reuse_alv_fieldcatalog_merge.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_PROGRAM_NAME) LIKE SY-REPID OPTIONAL
*" VALUE(I_INTERNAL_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(I_CLIENT_NEVER_DISPLAY) TYPE SLIS_CHAR_1
*" DEFAULT 'X'
*" VALUE(I_INCLNAME) LIKE TRDIR-NAME OPTIONAL
*" CHANGING
*" VALUE(CT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*" EXCEPTIONS
*" INCONSISTENT_INTERFACE
*" PROGRAM_ERROR
Import parameters
I_PROGRAM_NAME: Program in which the internal output table is declared and populated
I_INTERNAL_TABNAME: Internal output table name
I_STRUCTURE_NAME: Structure name (structure, table, and view)
I_CLIENT_NEVER_DISPL: Hide client fields default X
I_INCLNAME: Data declarations include name
CHANGING parameter
CT_FIELDCAT: Field catalog with field descriptions
The variant based on a program-internal table should only be used for rapid prototyping since the following restrictions apply:
1. Performance is affected since the code of the table definition must always be read and interpreted at runtime.
2. Dictionary reference are only considered if the keywords LIKE or INCLUDE STRUCTURE (not TYPE) are used.
Step 8
The other function module is used to display the internal output table with the contents
FUNCTION reuse_alv_list_display.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_INTERFACE_CHECK) DEFAULT SPACE
*" VALUE(I_CALLBACK_PROGRAM) LIKE SY-REPID DEFAULT SPACE
*" VALUE(I_CALLBACK_PF_STATUS_SET) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_CALLBACK_USER_COMMAND) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*" VALUE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*" VALUE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*" VALUE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV
*" OPTIONAL
*" VALUE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*" VALUE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*" VALUE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*" VALUE(I_DEFAULT) DEFAULT 'X'
" VALUE(I_SAVE) DEFAULT SPACE
" VALUE(IS_VARIANT) LIKE DISVARIANT
" STRUCTURE DISVARIANT DEFAULT SPACE
" VALUE(IT_EVENTS) TYPE SLIS_T_EVENT OPTIONAL
" VALUE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
" VALUE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
" VALUE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
" VALUE(I_SCREEN_START_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_START_LINE) DEFAULT 0
" VALUE(I_SCREEN_END_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_END_LINE) DEFAULT 0
" EXPORTING
" VALUE(E_EXIT_CAUSED_BY_CALLER)
" VALUE(ES_EXIT_CAUSED_BY_USER) TYPE SLIS_EXIT_BY_USER
" TABLES
" T_OUTTAB
" EXCEPTIONS
" PROGRAM_ERROR
Import parameters
I_INTERFACE_CHECK: Interface consistency check log output.
I_CALLBACK_PROGRAM: Name of the calling program
I_CALLBACK_PF_STATUS_SET: Set EXIT routine to status.
I_CALLBACK_USER_COMMAND: EXIT routine for command handling
I_STRUCTURE_NAME: Internal output table structure name
IS_LAYOUT: List layout specifications
IT_FIELDCAT: Field catalog with field descriptions
IT_EXCLUDING: Table of inactive function codes
IT_SPECIAL_GROUPS: Grouping fields for column selection
IT_SORT: Sort criteria for first list display
IT_FILTER: Filter criteria for first list output
IS_SEL_HIDE : Selection information modification
I_DEFAULT: Initial variant active/inactive logic
I_SAVE: Variants can be saved
IS_VARIANT : Variant information
IT_EVENTS: Table of events to perform IT_EVENT_EXIT : Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates f -
ALV Display - Error in field catalog
Hi ,
I am facing a problem in ALV... Field catalot is not getting populated... I am getting a message field catalog not found...
Can anyone please help me....... <URGENT DOES NOT EXIST HERE>...
I am enclosing my code also.. please go thourh it and help it....
REPORT ZINVENTORY
LINE-SIZE 120
LINE-COUNT 64.
MESSAGE-ID Z2
NO STANDARD PAGE HEADING..
type-pools : slis.
Tables *
tables: zasset,
anla,
itob,
equi.
data: v_repid LIKE sy-repid.
Selection Screen *
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS : S_bukrs FOR anla-bukrs OBLIGATORY ,
S_kostl FOR itob-kostl .
SELECTION-SCREEN : END OF BLOCK B1 .
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS: p_screen RADIOBUTTON GROUP gr1,
p_list RADIOBUTTON GROUP gr1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b2.
Internal Tables *
types: BEGIN OF ty_zasset, " occurs 0,
equnr like zasset-equnr,
ANLN1 LIKE zasset-ANLN1, " Asset number
ANLN2 LIKE zasset-ANLN2, " Sub Asset number
BUKRS LIKE zasset-BUKRS, " Company Code
KOSTL like zasset-kostl,
SCANNEDBY type zasset-scannedby,
SCANNINGDATE type zasset-SCANNINGDATE,
SCANNINGTIME type zasset-scanningtime,
UPDATEDATE type zasset-updatedate,
UPDATETIME type zasset-updatetime,
END OF ty_zasset.
DATA: wa_zasset TYPE ty_zasset.
DATA: it_zasset TYPE TABLE OF ty_zasset with header line..
types: BEGIN OF ty_zasset1, " occurs 0,
equnr TYPE equi-equnr,
ANLN1 LIKE anla-ANLN1, " Asset number
ANLN2 LIKE anla-ANLN2, " Sub Asset number
BUKRS LIKE anla-BUKRS, " Company Code
ernam like anla-ernam,
erdat like anla-erdat,
KOSTL like anlz-kostl,
SCANNEDBY type zasset-scannedby,
SCANNINGDATE type zasset-SCANNINGDATE,
SCANNINGTIME type zasset-scanningtime,
UPDATEDATE type zasset-updatedate,
UPDATETIME type zasset-updatetime,
END OF ty_zasset1.
DATA: wa_zasset1 TYPE ty_zasset1.
DATA: it_zasset1 TYPE TABLE OF ty_zasset1 with header line..
types: BEGIN OF ty_zasset2, " occurs 0,
equnr like itob-equnr,
ANLNr LIKE itob-ANLNr, " Asset number
ANLuN LIKE itob-ANLuN, " Sub Asset number
BUKRS LIKE itob-BUKRS, " Company Code
timbi like itob-timbi,
kostl like itob-kostl,
KOSTL like anlz-kostl,
SCANNEDBY type zasset-scannedby,
SCANNINGDATE type zasset-SCANNINGDATE,
SCANNINGTIME type zasset-scanningtime,
UPDATEDATE type zasset-updatedate,
UPDATETIME type zasset-updatetime,
END OF ty_zasset2.
DATA: wa_zasset2 TYPE ty_zasset2.
DATA: it_zasset2 TYPE TABLE OF ty_zasset2 with header line..
types: begin of ty_final , "occurs 0,
equnr like itob-equnr,
anln1 like anla-anln1,
anln2 like anla-anln2,
bukrs like anla-bukrs,
ernam
erdat
kostl like itob-kostl,
end of ty_final.
DATA: wa_final TYPE ty_final.
DATA: it_final TYPE TABLE OF ty_final with header line..
*DATA: it_zasset TYPE TABLE OF ty_zasset.
*data: it_zasset1 type table of ty_zasset1.
*data:wa_zasset type ty_zasset.
*data:wa_zasset1 type ty_zasset1.
Flags and Variables *
DATA : F_ERROR. " Flag for No Data
*pop field cat for f7
data: V_SYREPID LIKE SY-REPID,
IT_FLDCAT type slis_t_fieldcat_alv , "with header line,
wa_fldcat type slis_fieldcat_alv.
*DATA : IT_FLDCATS TYPE SLIS_T_FIELDCAT_ALV.
data: itab_events type slis_t_event,
wa_events type slis_alv_event.
*data: wa_layout type slis_layout_alv.
DATA : IT_COMMENTS TYPE SLIS_T_LISTHEADER,
WA_COMMENTS TYPE SLIS_LISTHEADER.
DATA : IT_SORTINFO TYPE SLIS_T_SORTINFO_ALV,
WA_SORTINFO TYPE SLIS_SORTINFO_ALV.
Initialization *
initialization.
SY-REPID = V_REPID.
At Selection Screen *
AT SELECTION-SCREEN.
PERFORM validation.
Start Of Selection *
start-of-selection.
perform select_data.
IF P_LIST = 'X'.
perform get_field_catalog.
PERFORM MODIFYFIELDCAT.
perform get_events.
perform write_comments.
perform grid_display.
*perform list_display.
ENDIF.
IF sy-subrc = 0.
IF p_list = 'X'.
loop at it_final.
perform get_events.
endloop.
endif.
endloop.
else.
*endif.
End Of Selection *
END-OF-SELECTION.
*perform display_Recorsds.
*loop at zasset.
*& Form validation
text
--> p1 text
<-- p2 text
FORM validation.
*Local variables.
DATA:
lv_bukrs type anla-bukrs,
lv_kostl type itob-kostl,
lv_anln1 TYPE anla-anln1, "MAterial Number
lv_anln2 TYPE anla-anln2.
*Validation for company code
if not s_bukrs is initial.
select single bukrs from anla
into lv_bukrs
where bukrs in s_bukrs.
if sy-subrc <> 0.
*Message used : Invalid company code.
endif.
endif .
Validation for cost center
if not s_kostl is initial.
select single kostl from itob
into lv_kostl
where kostl in s_kostl.
if sy-subrc <> 0.
*Message used : Invalid company code.
endif.
endif .
ENDFORM. " validation
*& Form display
text
--> p1 text
<-- p2 text
FORM display.
write :/15 it_final-anln1,
it_final-anln2,
sy-vline.
*-bukrs,
it_zasset-anln1.
ENDFORM. " display
*& Form get_field_catalog
text
--> p1 text
<-- p2 text
FORM get_field_catalog.
*REFRESH IT_FLDCAT.
*CLEAR IT_FLDCAT.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_FINAL'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " get_field_catalog
*& Form get_events
text
--> p1 text
<-- p2 text
FORM get_events.
WA_COMMENTS-TYP = 'H'.
WA_COMMENTS-KEY = 'THIS IS THE HEADING.'.
WA_COMMENTS-INFO = 'LIST OF SALES ORDERS'.
APPEND WA_COMMENTS TO IT_COMMENTS.
ENDFORM. " get_events
*& Form grid_display
text
--> p1 text
<-- p2 text
FORM grid_display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'FIRST PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'LIST OF FLIGHT DETAILS'
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = it_fldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = itab_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = it_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " grid_display
*& Form write_comments
text
--> p1 text
<-- p2 text
FORM write_comments.
WA_COMMENTS-TYP = 'H'.
WA_COMMENTS-KEY = 'THIS IS THE HEADING.'.
WA_COMMENTS-INFO = 'LIST OF SALES ORDERS'.
APPEND WA_COMMENTS TO IT_COMMENTS.
ENDFORM. " write_comments
*& Form select_data
text
--> p1 text
<-- p2 text
FORM select_data.
clear: it_zasset, it_zasset[].
select equnr "bukrs
anln1
anln2
bukrs
KOSTL
SCANNEDBY
SCANNINGDATE
SCANNINGTIME
UPDATEDATE
UPDATETIME
into table it_zasset "(g_anln1,g_anln2)
from zasset
where bukrs = zasset-bukrs..
and kostl = zasset-kostl.
if sy-subrc = 0.
sort it_zasset by anln1 anln2.
endif.
append it_zasset.
clear it_zasset1.
select
equnr
anln1
anln2
bukrs
ernam
erdat
bukrs
KOSTL
SCANNEDBY
SCANNINGDATE
SCANNINGTIME
UPDATEDATE
UPDATETIME
into table it_zasset1 "(g_anln1,g_anln2)
from anla
where bukrs = it_zasset-bukrs.
WHERE BUKRS IN S_BUKRS.
and kostl = anla-kostl.
if sy-subrc = 0.
select equnr
anlnr
anlun
bukrs
timbi
kostl
into table it_zasset2
from itob
for all entries in it_zasset1
where bukrs = it_zasset1-bukrs
WHERE anlnr = it_zasset1-anln1.
endif.
APPEND IT_ZASSET1.
IF SY-SUBRC = 0.
*loop at it_zasset1 into wa_zasset1.
loop at it_ZASSET1 into wa_zasset1.
move wa_zasset1-bukrs to wa_final-bukrs.
move wa_zasset1-anln1 to wa_final-anln1.
move wa_zasset1-anln2 to wa_final-anln2.
append wa_final to it_final.
endloop.
ENDIF.
sort it_final.
*LOOP AT IT_FINAL.
*ENDLOOP.
*ENDIF.
*if sy-subrc = 0.
*loop at it_zasset into wa_asset.
*read table it_zasset into wa_asset with key anln2 = wa_asset-anln2
*binary search.
*read table it_final into wa_final with key anln2 = wa_final-anln2
*binary search.
*if wa_asset-anln2 = wa_final-anln2.
*write : / 'error'.
*endif.
If sy-subrc <> 0.
f_error = 'X'.
write : 'No data Exists for the given selection in FA table'.
else.
loop at it_final.
perform display.
endloop.
records exits in anla table also.
endif.
ENDFORM. " select_data
*& Form MODIFYFIELDCAT
text
--> p1 text
<-- p2 text
FORM MODIFYFIELDCAT.
LOOP AT IT_FLDCAT INTO WA_FLDCAT.
CASE WA_FLDCAT-FIELDNAME.
WHEN 'EQUNR'.
WA_FLDCAT-COL_POS = 1.
WA_FLDCAT-SELTEXT_L = 'aSSET'.
WHEN 'ANLN1'.
wa_FLDCAT-KEY = 'X'.
WA_FLDCAT-COL_POS = 5.
WA_FLDCAT-SELTEXT_L = 'aSSET'.
WHEN 'ANLN2'.
WA_FLDCAT-KEY = 'X'.
WA_FLDCAT-COL_POS = 6.
wa_FLDCAT-HOTSPOT = 'X'.
WHEN 'BUKRS'.
WA_FLDCAT-CURRENCY = 'INR'.
WA_FLDCAT-SYMBOL = 'X'.
ENDCASE.
MODIFY IT_FLDCAT FROM WA_FLDCAT.
*IT_FLDCAT-fieldname = 'EQUNR'.
IT_FLDCAT-seltext_m = 'DOCUM_TYPE'.
IT_FLDCAT-col_pos = 1.
IT_FLDCAT-outputlen = 10.
IT_FLDCAT-emphasize = 'X'.
IT_FLDCAT-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append IT_FLDCAT TO IT_FLDCAT.
IT_FLDCAT-fieldname = 'ANLN1'.
IT_FLDCAT-seltext_m = 'DOCUM_TYPE'.
IT_FLDCAT-col_pos = 1.
IT_FLDCAT-outputlen = 10.
IT_FLDCAT-emphasize = 'X'.
IT_FLDCAT-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append IT_FLDCAT TO IT_FLDCAT.
ENDLOOP.
ENDFORM. " MODIFYFIELDCAT
*& Form list_display
text
--> p1 text
<-- p2 text
*FORM list_display.
*CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_SYREPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'FRM_USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = wa_layout
IT_FIELDCAT = IT_FLDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = ITAB_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*ENDFORM. " list_display
Edited by: Craig Cmehil on Jul 18, 2008 10:01 AMThe problem is with this...
types: begin of ty_final , "occurs 0,
equnr like itob-equnr,
anln1 like anla-anln1,
anln2 like anla-anln2,
bukrs like anla-bukrs,
ernam
erdat
kostl like itob-kostl,
end of ty_final.
DATA: wa_final TYPE ty_final.
DATA: it_final TYPE TABLE OF ty_final with header line.
when you are using Fieldcatalog merge you have to avoid using the TYPES Declaration of the internal table.
Instead of that you can do this
data: begin of it_final occurs 0,
equnr like itob-equnr,
anln1 like anla-anln1,
anln2 like anla-anln2,
bukrs like anla-bukrs,
ernam
erdat
kostl like itob-kostl,
end of it_final. -
Field catalog not appearing in the condition table for output determination
Hello,
I wanted to include WBSTK as a condition table entry in the output determination for outbound deliveries, WBSTK is available as field catalog , but not available during condition table creation.
Can you pls help me out?
Regards
VaideeCheck OSS Notes
379619 - Preference process in SD order: Prefrnc ID missing
595984 - Preference indicator in SD order
379269 - Preference in SD doc: User exit: Set pref. indicator PREFE
Regards -
Adding field in field catalog and to display in output
Hi, In this below report i have newly added the user group field i.e' usr02-class ' and the field and data is coming up to internal table ' it_usr02 ' in 'REUSE_ALV_GRID_DISPLAY' and in field catalog it is not coming i have debugged and only the class field is not coming. plz suggest me how to add this in fieldcatalog .
REPORT zrpbc_user_log.
Declaration of Tables *
TABLES: usr02,usr03.
DATA:
BEGIN OF it_usr02 OCCURS 0,
bname LIKE usr02-bname, "EID
class LIKE usr02-class, "User Group
trdat LIKE usr02-trdat, "Last Logged in Date
*Start of Change Charm 25971
name1 LIKE usr03-name1, "First Name
name2 LIKE usr03-name2, "Last Name
e_mail LIKE bapiaddr3-e_mail,"Emailid
*End of Change Charm 25971
END OF it_usr02.
DATA: w_address TYPE bapiaddr3,
it_return TYPE STANDARD TABLE OF bapiret2,
w_name LIKE bapibname-bapibname.
TYPE-POOLS: slis.
DATA it_fcat TYPE slis_t_fieldcat_alv.
DATA : w_fcat TYPE slis_fieldcat_alv.
Declaration of Constants *
CONSTANTS: c_past_days TYPE i VALUE 90.
Declaration of Variables *
DATA w_repid LIKE sy-repid.
DATA w_no_lines LIKE sy-tabix.
DATA w_idx TYPE sy-tabix.
Selection Screen *
SELECT-OPTIONS:
s_trdat FOR usr02-trdat.
INITIALIZATION *
INITIALIZATION.
PERFORM initialize_data.
Start of Selection *
START-OF-SELECTION.
*Get the user details
PERFORM get_user_details.
End of Selection *
END-OF-SELECTION.
PERFORM get_alv_display.
*& Form initialize_data
text
FORM initialize_data .
"Initialize the select options with the appropriate date range
s_trdat-low = sy-datum - c_past_days.
s_trdat-high = sy-datum.
s_trdat-sign = 'I'.
s_trdat-option = 'BT'.
APPEND s_trdat.
ENDFORM. " initialize_data
*& Form get_user_details
text
FORM get_user_details .
read data into table it_usr02
SELECT bname class trdat
FROM usr02
INTO TABLE it_usr02
WHERE
trdat IN s_trdat AND
bname LIKE 'E%'.
LOOP AT it_usr02.
w_idx = sy-tabix.
MOVE : it_usr02-bname TO w_name.
*Start of Change Charm 25971
Getting the First ,Last name & Emailid of the user
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = w_name
IMPORTING
address = w_address
TABLES
return = it_return.
MOVE : w_address-firstname TO it_usr02-name1,
w_address-lastname TO it_usr02-name2,
w_address-e_mail TO it_usr02-e_mail.
MODIFY it_usr02 INDEX w_idx.
ENDLOOP.
*End of Change Charm 25971
ENDFORM. " get_user_details
*& Form get_alv_display
text
FORM get_alv_display.
w_repid = sy-repid.
PERFORM get_alv_fieldcat.
Create Field-catalogue from internal table
Call for ALV list display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
it_fieldcat = it_fcat
i_save = 'A'
TABLES
t_outtab = it_usr02
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode'(001),
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'(002).
ENDIF.
ENDFORM. " get_alv_display
*& Form get_alv_fieldcat
text
FORM get_alv_fieldcat .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = w_repid
i_internal_tabname = 'IT_USR02'
i_inclname = w_repid
CHANGING
ct_fieldcat = it_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode'(001),
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'(002).
ENDIF.
*Start of Change Charm 25971
w_fcat-reptext_ddic = 'Firstname'(003).
MODIFY it_fcat FROM w_fcat TRANSPORTING reptext_ddic
WHERE fieldname = 'NAME1'.
w_fcat-reptext_ddic = 'Lastname'(004).
MODIFY it_fcat FROM w_fcat TRANSPORTING reptext_ddic
WHERE fieldname = 'NAME2'.
*End of Change Charm 25971
ENDFORM. " get_alv_fieldcatPlease dont DUPLICATE the Posts. Its against the Forum Rules.
Close any one theard.
Duplicate Post:
In this Report i want to add class field in usr02 table
Regards,
Padma -
Reg: Dynamic Field catalog in ALV
Hi ,
Can any one guide me to build a dynamic field catalog in ALV report?
Below is the format which i expect..........
Material | Plant1 | Plant2 | Plant3 | ....................| Plant 20 |
Qty
Val
Qty
Val
Qty
Val
Qty
Val
The plant 1 to 20 has to be brought dynamically as headings from T001W table. (Horizontally populate)
Below each plant i need sub-headings "QTY" and "VAL". (Horizontally populate)
List of Materials should be brought vertically from MARA table. (Vertically populate)
Can anyone suggest how to bring out this format for populating data accordingly into the o/p format?
Ur help will be appreciated.
Thanks,
K.S.Kannanyour part of the code is present in routine
perform dynamic_table.
*& Report ZCS_NAC_MAT_CHARACTERISTICS
2/ Description ...: Business requirement is to get all materials
without any characteristic values maintained in SAP
which are given in the selection screen.
REPORT znac_material_char.
TYPE-POOLS : abap,
slis.
TABLES : kssk,
klah,
mara,
makt,
cabn,
t134,
t023.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv ,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA : w_layout TYPE slis_layout_alv.
DATA : st_layout TYPE slis_layout_alv.
DATA : t_header TYPE slis_t_listheader,
w_header TYPE slis_listheader.
TYPES : BEGIN OF ty_cabn,
atinn TYPE cabn-atinn,
atnam TYPE cabn-atnam,
END OF ty_cabn.
DATA : i_cabn TYPE STANDARD TABLE OF ty_cabn WITH HEADER LINE.
DATA : w_cabn LIKE i_cabn.
TYPES : BEGIN OF ty_ausp,
objek TYPE ausp-objek,
atinn TYPE ausp-atinn,
klart TYPE ausp-klart,
END OF ty_ausp.
DATA : i_ausp TYPE STANDARD TABLE OF ty_ausp WITH HEADER LINE.
DATA : w_ausp LIKE i_ausp.
TYPES : BEGIN OF ty_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
prdha TYPE mara-prdha,
mstae TYPE mara-mstae,
mstde TYPE mara-mstde,
END OF ty_mara.
DATA : i_mara TYPE STANDARD TABLE OF ty_mara WITH HEADER LINE.
DATA : w_mara LIKE i_mara.
DATA : i_mara_temp TYPE STANDARD TABLE OF ty_mara WITH HEADER LINE.
DATA : w_mara_temp LIKE i_mara_temp.
TYPES :BEGIN OF ty_data,
atnam TYPE cabn-atnam,
atinn TYPE cabn-atinn,
objek TYPE ausp-objek,
klart TYPE ausp-klart,
matnr TYPE mara-matnr,
maktx TYPE makt-maktx,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
prdha TYPE mara-prdha,
mstae TYPE mara-mstae,
mstde TYPE mara-mstde,
END OF ty_data.
DATA : i_data TYPE STANDARD TABLE OF ty_data WITH HEADER LINE.
DATA : w_data LIKE i_data.
DATA : i_class TYPE STANDARD TABLE OF sclass WITH HEADER LINE.
DATA : w_class LIKE i_class.
DATA : i_class_temp TYPE STANDARD TABLE OF sclass WITH HEADER LINE.
DATA : w_class_temp LIKE i_class_temp.
DATA : i_objdata TYPE STANDARD TABLE OF clobjdat WITH HEADER LINE.
DATA : w_objdata LIKE i_objdata.
TYPES : BEGIN OF ty_objdata_temp.
TYPES: matnr TYPE mara-matnr.
TYPES: maktx TYPE makt-maktx.
INCLUDE STRUCTURE clobjdat.
TYPES : prdha TYPE mara-prdha.
TYPES : mstde TYPE mara-mstde.
TYPES : END OF ty_objdata_temp.
DATA : i_objdata_temp TYPE STANDARD TABLE OF ty_objdata_temp WITH HEADER LINE.
DATA : w_objdata_temp LIKE i_objdata_temp.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY.
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
fs_fldcat TYPE slis_t_fieldcat_alv,
t_fldcat1 TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(30) TYPE c.
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(40) TYPE c.
DATA: index(3) TYPE c,
v_time(60) TYPE c.
DATA: wa_cat LIKE LINE OF fs_fldcat.
CONSTANTS : c_nac TYPE klah-class VALUE 'NAC',
c_klart TYPE ausp-klart VALUE '001',
c_check TYPE c VALUE 'X' .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (28) text-001 .
SELECT-OPTIONS: s_atnam FOR cabn-atnam NO INTERVALS OBLIGATORY. " Characteristic name
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_matnr FOR mara-matnr. " material Number
SELECT-OPTIONS: s_mtart FOR mara-mtart. " material type
SELECT-OPTIONS: s_matkl FOR mara-matkl. " material type
SELECT-OPTIONS: s_mstae FOR mara-mstae. " X-Plant material status
PARAMETERS : s_date LIKE sy-datum OBLIGATORY DEFAULT sy-datum . " date
SELECTION-SCREEN END OF BLOCK b2 .
AT SELECTION-SCREEN ON s_atnam.
SELECT SINGLE * FROM cabn WHERE atnam IN s_atnam.
IF sy-subrc 0.
MESSAGE text-003 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_matnr.
SELECT SINGLE * FROM mara WHERE matnr IN s_matnr.
IF sy-subrc 0.
MESSAGE text-004 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_mtart.
SELECT SINGLE * FROM t134 WHERE mtart IN s_mtart.
IF sy-subrc 0.
MESSAGE text-005 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON s_matkl.
SELECT SINGLE * FROM t023 WHERE matkl IN s_matkl.
IF sy-subrc 0.
MESSAGE text-006 TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_data_keydate.
PERFORM material_all_charname.
PERFORM get_classification.
PERFORM dynamic_table.
*& Form dynamic_table
text
--> p1 text
<-- p2 text
FORM dynamic_table.
PERFORM fieldcatalog.
PERFORM dynamic_table_create.
PERFORM final_data.
PERFORM final_fieldcatalog.
PERFORM layout_build.
PERFORM grid_display.
ENDFORM. " fieldcat
*& Form layout_build
text
FORM layout_build .
st_layout-zebra = c_check.
st_layout-no_vline = ''.
st_layout-colwidth_optimize = c_check.
st_layout-detail_popup = c_check.
st_layout-detail_initial_lines = c_check.
st_layout-detail_titlebar = text-021.
ENDFORM. " layout_build
*& Form alv_top_of_page
text
FORM alv_top_of_page.
REFRESH t_header.
CLEAR t_header.
w_header-typ = 'H'. "H=Header, S=Selection, A=Action
w_header-key = ' '.
w_header-info = text-019.
APPEND w_header TO t_header.
CONCATENATE sy-datum4(2) '-' sy-datum6(2) '-' sy-datum0(4) ' / ' sy-uzeit0(2) ':' sy-uzeit2(2) ':' sy-uzeit4(2) INTO v_time.
w_header-typ = 'S'. "H=Header, S=Selection, A=Action
w_header-key = text-020.
w_header-info = v_time.
APPEND w_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
ENDFORM. "alv_top_of_page
*& Form grid_display
text
--> p1 text
<-- p2 text
FORM grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'ALV_TOP_OF_PAGE'
it_fieldcat = fs_fldcat
is_layout = st_layout
i_default = c_check
i_save = 'A'
it_events = v_events[]
TABLES
t_outtab = <t_dyntable>.
ENDFORM. " grid_display
*& Form FINAL_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM final_fieldcatalog .
wa_cat-fieldname = text-009.
wa_cat-seltext_m = text-015.
wa_cat-outputlen = 18.
APPEND wa_cat TO fs_fldcat.
wa_cat-fieldname = text-011.
wa_cat-seltext_m = text-016.
wa_cat-outputlen = 40.
APPEND wa_cat TO fs_fldcat.
LOOP AT s_atnam.
CLEAR wa_cat.
wa_cat-fieldname = s_atnam-low.
wa_cat-seltext_m = s_atnam-low.
wa_cat-outputlen = '15'.
APPEND wa_cat TO fs_fldcat.
ENDLOOP.
wa_cat-fieldname = text-012.
wa_cat-seltext_m = text-017.
wa_cat-outputlen = 18.
APPEND wa_cat TO fs_fldcat.
wa_cat-fieldname = text-013.
wa_cat-seltext_m = text-018.
wa_cat-outputlen = 8.
APPEND wa_cat TO fs_fldcat.
ENDFORM. " FINAL_FIELDCATALOG
*& Form FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM fieldcatalog .
wa_it_fldcat-fieldname = text-009.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 18.
APPEND wa_it_fldcat TO t_fldcat1.
wa_it_fldcat-fieldname = text-011.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 40.
APPEND wa_it_fldcat TO t_fldcat1.
LOOP AT s_atnam.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = s_atnam-low.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 30.
APPEND wa_it_fldcat TO t_fldcat1.
ENDLOOP.
wa_it_fldcat-fieldname = text-012.
wa_it_fldcat-datatype = text-010.
wa_it_fldcat-intlen = 18.
APPEND wa_it_fldcat TO t_fldcat1.
wa_it_fldcat-fieldname = text-013.
wa_it_fldcat-datatype = text-014.
wa_it_fldcat-intlen = 8.
APPEND wa_it_fldcat TO t_fldcat1.
ENDFORM. " FIELDCATALOG
*& Form DYNAMIC_TABLE_CREATE
text
--> p1 text
<-- p2 text
FORM dynamic_table_create .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat1
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
ENDFORM. " DYNAMIC_TABLE_CREATE
*& Form FINAL_DATA
text
--> p1 text
<-- p2 text
FORM final_data .
LOOP AT i_objdata_temp INTO w_objdata_temp.
*assign w_objdata_temp-matnr to <fs_dyntable>.
AT NEW matnr.
wa_flname = text-009.
fieldvalue = w_objdata_temp-matnr.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDAT.
wa_flname = text-011.
fieldvalue = w_objdata_temp-maktx.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = w_objdata_temp-atnam.
fieldvalue = w_objdata_temp-ausp1.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = text-012.
fieldvalue = w_objdata_temp-prdha.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
wa_flname = text-013.
fieldvalue = w_objdata_temp-mstde.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
AT END OF matnr.
APPEND <fs_dyntable> TO <t_dyntable>.
ENDAT.
ENDLOOP.
ENDFORM. " FINAL_DATA
*& Form GET_CLASSIFICATION
text
--> p1 text
<-- p2 text
FORM get_classification .
LOOP AT i_data INTO w_data.
SELECT SINGLE * FROM klah WHERE class = c_nac.
IF sy-subrc = 0.
IF w_data-mstde >= klah-vondt.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
class = c_nac
classtext = c_check
classtype = c_klart
clint = 0
features = c_check
language = sy-langu
object = w_data-objek
TABLES
t_class = i_class
t_objectdata = i_objdata
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
LOOP AT i_class INTO w_class.
MOVE w_class TO w_class_temp.
APPEND w_class_temp TO i_class_temp.
ENDLOOP .
LOOP AT s_atnam.
READ TABLE i_objdata INTO w_objdata WITH KEY atnam = s_atnam-low.
IF sy-subrc = 0.
MOVE w_data-matnr TO w_objdata_temp-matnr.
MOVE w_data-maktx TO w_objdata_temp-maktx.
MOVE-CORRESPONDING w_objdata TO w_objdata_temp.
MOVE w_data-prdha TO w_objdata_temp-prdha.
MOVE w_data-mstde TO w_objdata_temp-mstde.
APPEND w_objdata_temp TO i_objdata_temp.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " GET_CLASSIFICATION -
Change field catalog in VT05 - Selective logs for collective run
Hi,
Through transaction VT05, we can check shipment log which having following ALV field Catalog.
Collective run
Date
Time
User
Transaction code
Operating mode
Problem class
Expiry date
Keep until expiry
Processing status
But if we want check Delivery number for particular Collective Run then we have to click that collective run and then can check for the Delivery number.
Actually our requirement is to add one more column in above ALV field Catalog of Delivery Number.
I have searched for Enhancements and BADIs, but I did not found suitable one for VT05 log.
Can any one help me out for above issue for adding one more column in above ALV field Catalog of Delivery Number (along with above mentioned ALV field catalog in output) of VT05 log report.Thanks Nabheet once again...
I would like to show you the coding what I have done in implemented implicit Enhancements.
Following code is written under implemented implicit Enhancements - ZSHIPMENT_DETAIL
Properties of Enhancement Implementation ZSHIPMENT_DETAIL (Active)
Enhancem. Technique: Source Code Plug-In
Description Showing SHIPMENT Detail in output
Package $TMP
Original Language EN
Created MNIKAM 02/09/2012
Last Changed MNIKAM 02/19/2012
Superordinate Enhancement Implementation ZSHIPMENT
Enhanced Development Object: V54X
SAPLV54X Static Enhancement Point/Section \PR:SAPLV54X\FO:LOG_HEADER_DISPLAY\SE:BEGIN\EI
ENHANCEMENT 1 ZSHIPMENT_DETAIL. "active version
TYPE-POOLS: szal.
DATA: g_l_header_extr TYPE header_extr.
FIELD-SYMBOLS: <f_g_l_header_extr> TYPE header_extr.
DATA: g_l_log_link TYPE log_link.
FIELD-SYMBOLS: <f_g_l_log_link> TYPE log_link.
DATA: g_l_t_lognumbers TYPE szal_lognumbers WITH HEADER LINE.
FIELD-SYMBOLS: <f_log_nr> TYPE log_nr.
data: messages TYPE TABLE OF balm.
FIELD-SYMBOLS: <f_l_s_message> TYPE balm.
DATA: l_tabix TYPE sy-tabix.
LOOP AT G_HEADER_EXTR_TAB ASSIGNING <f_g_l_header_extr> WHERE status ne 1.
CLEAR: l_tabix.
l_tabix = sy-tabix.
READ TABLE g_log_link_tab ASSIGNING <f_g_l_log_link>
WITH KEY fccnu = <f_g_l_header_extr>-fccnu
BINARY SEARCH.
READ TABLE <f_g_l_log_link>-log_tab ASSIGNING <f_log_nr> index 1.
CLEAR: g_l_t_lognumbers.
g_l_t_lognumbers-item = <f_log_nr>-log_nr.
APPEND g_l_t_lognumbers.
CLEAR: messages.
CALL FUNCTION 'APPL_LOG_READ_DB_WITH_LOGNO'
TABLES
lognumbers = g_l_t_lognumbers[]
messages = messages.
delete messages WHERE MSGNO ne 371 AND MSGNO ne 494 AND MSGNO ne 491.
LOOP AT messages ASSIGNING <f_l_s_message> WHERE LOGNUMBER = <f_log_nr>-log_nr
AND ( MSGTY = 'S' or MSGTY = 'W' ) "Message Type S-success & W-warning
AND MSGID = 'VW'
AND ( MSGNO = 371 or MSGNO = 494 or MSGNO = 491 ). "Message Numbr through which Shipment Number gets
<f_g_l_header_extr>-tknum = <f_l_S_message>-MSGV1. "SHIPMENT NUMBER
CLEAR: g_l_t_lognumbers[].
exit.
ENDLOOP.
ENDLOOP.
ENDENHANCEMENT.
Thanks again,
Mahesh Nikam.
Maybe you are looking for
-
I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?
-
Interactive chart in version 3.1
I can create flash chart regions OK but when I use the Chart option on an interactive report, I get the links that say "Edit Chart" and View Report" but there is no chart on the page Have I missed a vital step? The source for the report is very simpl
-
Default value from another table in dummy field on a portal form ..
A form based on a table : id name xx_id I created a dummyfield on the form in which i would like the name corresponding to xx_id -> I would like to fetch a value from another tabel into a dummy field. thanx Trine Hindsholm
-
My Macbook Pro mid 2012 is randomly restarted (10.8.2)
Hi all, i got a mid 2012 macbook pro 2 months ago, and this happens to me since i upgrade 10.8.2, it has been restarted by itself many times, and i don't know why, i just use web browser, not any heavy software, additionally this morning it was resta
-
Suggestion for high density Li-Battery
Dear Apple manager, I am writing to suggest to develop hi-density lithium-battery. All Apple mobile devices need hi-density Li-battery for long time using, quick charging and safety. I am working in Li-battery material company in China, our main prod