ICR - Single Sets (FBRC004)

Hi All,
While maintaining the single set values in transaction FBRC004, is there a 'best way' to maintain these i.e. range vs single value?
We face an issue of continual maintenance and change control whenever we need to add an associated company vendor/customer number to the sets and are thinking that the use of a range of numbers will resolve that. The question is whether the use of such ranges will have a negative effect on system performance as opposed to the sue of single values to access table LFA1 and KNA1?
Any advice will be appreciated.
Thanks
Kris

Hello Kris,
The fewer entries in your set the better
If you simply want all customer and vendor accounts to be included you should set From to 0 (Zero) and To to ZZZZZZZZZZ.
These "sets" are not generated to contain actual values in this context. The specified values / ranges are simply used during processing. So deleting the single values and making it a single value range will probably speed up your program run...
Ralph

Similar Messages

Exporting Data for a single set of books from Oracle Financials

I have a multiorg set-up with multiple set of books in an Oracle instance. I want to be able to export data for a single set of books into a new Oracle instance.
Any insight into how this can be done (without going through each of the tables and referential integrity constraints) will be of great help
thanks
anoop

It is a bit unclear what you are sending these POs to the other system for? Is it for matching to invoices there? Is it for receiving into inventory there?
Are these two entities belong to the same parent but on two different oracle apps databases?
In essence what do they do with the PO that you are sending to them?
Why do you think there will be intercompany invoicing?
Thanks
Nagamohan

Route calls to two different CSQs, but show single set of Service Level stats on report

We have a single node UCCX 9.0.2 Premium environment to handle our ACD operations. Our agents take inbound customer service, claims and sales calls for a few dozen of our clients. All of these calls are currently taken by the same two teams of people regardless of which client it is for, with the sales calls going to one team and the customer service and claims calls going to the other team. There is a Sales CSQ and Skill for each client, and a Customer Service CSQ and Skill for each client. Currently the caller is presented with a menu giving two options...press 1 for customer service, press 2 for sales.
What we are looking at doing is adding a third prompt specifically for claims. Claims issues are handled by the Customer Service team, but only certain members of the team. Obviously I can create a new CSQ and Skill for Claims for each client, then have the new prompt route to the CSQ for Claims.
The challenging part is the reporting for this. We have to report Service Level statistics for Customer Service calls (but not sales) for each client, to show whether or not we're meeting the service level agreement requirements. The splitting out of claims calls to be handled by specific people is something being requested by our internal management, not the client. But as far as the client is concerned those are customer service calls, they would count toward our customer service SLA, and they expect to see a single SLA statistic reported.
I know that it's only possible to add multiple skills to a CSQ and force agent selection based on a specific skill in CCE (not available in CCX). But is there any way to script my way around this to get the same end result, and have the reporting data still reflect a single set of CSQ service level stats?

Thanks Aaron. We're running HRC right now, but I've been dying to switch us to the version of CUIC that's built in to CCX for quite a while and it appears I may be able to do so soon. I'm hoping to utilize some of the additional flexibility of the saved reporting templates in CUIC to massage the data formatting as needed.
CUIC Premium is something our management will be considering, but I'm anticipating the license for it being very expensive and probably causing them to eliminate it as an option. Unfortunately I haven't been able to get my hands on a demo copy of it to try to "sell" it to them either.
Thanks again for your help Aaron.

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

You can drop the resolution a little, but it makes everything blurry.
OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
The UI really needs to be adjustable and it's not.

How many domains can share a single set of database repository schemas?

How many domains can share a single set of database repository schemas (created by the RCU)?
What is the best practice in an environment with many domains/WLS servers/applications and a desire to manage minimum database MW repository schemas?

Hi,
You can't share the same repository for multiple domains.
http://docs.oracle.com/cd/E23943_01/web.1111/e13716/understand_domains.htm#i1102627
(Please mark question as answered or helpful)
Arik

Single Set of Credentials

Is there a way to set up eBusiness Suite (11.5.10.2) to use a single set of credentials in particular the users AD credentials so that only one username and password has to be maintained?
Thank you
Linda

In-Depth: Using Single Sign-On 10g with E-Business Suite Release 11i
http://blogs.oracle.com/schan/2006/05/02#a96
There are also some related atricles available at the end of the link above. In addition, you can Google or search Metalink for SSO and 11i.

REG: Creating customer stock for different material codes has an single set

Hi FRIENDS,
we are purchasing finished items from our vendor in numbers (Eg. Item Number 1 to 6 (all different items and having different item codes)) and selling it to our customer in a set ( 1 set contains all this 6 items and we have code for this Set). Please let me know how to create the customer stock for these items in the store as the store shows stock for 7 different items, not in a set.
Please let em know if any more information is nedded

hi dan,
as per your requriment you can have all MRP viewsfor HAWA material type.
that means you are purchasing, use HAWA for finished goods in SAP system.
if you are having different item codes seperately for each item.
take one packing material called CARTON and maintain UOM as 6 items and you can pack the same in BOM.
use PP -PHANTOM - BOM which should add all the 7 materials in & gives one single material as OUTPUT.
use 561 GMT and upload that material as a final finished goods and in MMBE you can see only one called CARTON inside it set of 6 materials will be there.
BUT BE AWARE OF COSTING OF THE MATERIAL because each material will be having the its price. So discuiss with PP as well as FICO consultants.
whether you will cost the total set of carton or individual material
go ahead
test and confirm
this clears your issue
balajia

Uprgrade to Cloud on two Macs from a single set of CS disks?

We were running CS5 legally on two Macs (from one set of disks) and now want to upgrade to Creative Cloud on both computers. Does anyone know if Adobe will let us get the upgrade price for both? We only have one serial number.

a single user license allows one user to install on up to two computers.
to get upgrade pricing and to install cc you do not need to have a previous version installed. having the previous version's serial number is sufficient.

Two HDTV on a single set top box

I want to have two televisions in my master bedroom suite so I can see the same program on both televisions. How do I wire the televisions to the STB?

Two options as i see it ...
Connect one TV via HDMI and the other via component cables. Both will give a high def output to each TV.
Or, purchase an HDCP compliant HDMI splitter and drive both TV's via HDMI by splitting the single HDMI output from the STB into two HDMI outputs which can be connected to each individual TV. Here's one such device ....
http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10113&cs_id=1011301&p_id=5418&seq=1&for...

Accessing all brushes inside a 'single set of brushes' downloaded to my creative cloud.

I have downloaded a 'set of brushes' to my creative cloud library. However, when selecting the brush, a warning dialogue pops up with 'The asset you have selected contains multiple presets. Only the first preset will be used'. How do I access all the brushes?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

How can I graph muliple sets of y-values against a single set of x-values?

Hi. I am trying to write a VI that will take columns of data stored in a 2D array and plot it with the first column being the x-coordinates and all subsequent columns (different parameters) of data being y-coordinates. The number of these parameters is determined by the user, but it could be as high as 128. I think that I need to write a for loop that will pair each column of y-coordinates with the column of x-coordinates in a cluster, and then create an array of clusters to be plotted with an xy graph, but I am not sure how to do this.
Also, it would be nice if each parameters could be its own color so they can be distinguished on the graph (each parameter is over 40,000 data points)
Thank you in advance!
-Pushrod

What have you tried so far? A for-loop is a good way to do this since you have so many columns, and you can automatically have it create the array of clusters necessary for the XY graph. Basically you just need to index out the first column to get your X values, and then drive a for-loop for the number of Y values. You can determine this by simply using Array Size on the 2D array. It will return to you the number of rows and the number of columns. The coloring of each trace is automatic. One solution:
Attachments:
Example_VI.png ‏21 KB

How to install two or more exe files in a single set up ?

hi
I want to make a setup (deployment project ) using visual studio 2010. my requirement is to install a third party software before installing my windows form setup application. how can I manage the setup creation process ?

Hi jagabandhu Patro,
According to your description, you'd like to add your own custom prerequisite to winforms setup application.
I suggest you using Bootstrapper Package to manage the prerequisites.
You could get the steps about how to use Bootstrapper in the following articles
https://msdn.microsoft.com/en-us/library/ee726596.aspx.
https://msdn.microsoft.com/en-us/library/ms165429%28printer%29.aspx?f=255&MSPPError=-2147217396
http://www.codeproject.com/Articles/15863/Add-your-own-custom-prerequisite-to-quot-ClickOnce
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to past single activity set in multiple wbs

hi to all i have many work breakdown structure in Primavera p6.
and i have single set of activity this is use for my all wbs so how can we copy and past please give me a step.

hi tom thanks for answering but my query is different
i have one set of activity and i have multiple wbs so how can i paste activities set under multiple wbs, in one go.
eg.
activity set
1 one activity
2 two activity
3 three activity
4 four activity
5 five activity
this is my set of activities and i have to paste the same set under multiple wbs, in one go.
How can i do this? please revert.

Republish to Flickr from LR4 posts as new photos instead of updates them (only one set, not all)

I have a single set on Flickr that I cannot republish updates to from LR4 - republishing a modified photo posts it as a new photo. All other sets seem to work fine. I use the "built-in" Flickr plugin and LR4.3 with a Flickr Pro account. This issue started with LR4.2 when I got my Nikon D800. I've tried just about everything I can think of and have been searching for any similar problems for months and decided to finally ask for help myself.
Back in October I created a set of an event, and published the photos to Flickr without issue. A week later I wanted to republish a few photos and noticed that they instead published to the set as new. If I mark to republish, yet another copy is posted as new. After some testing, this is only for images in this one particular set - any other images in any other set update their existing version as expected.
After a while I began to wonder if the machine tag I added was causing it (active:event=) so I removed the tag from the image on both sides and tried to republish again with the same results.
Naturally I delete the new copy of the image from Flickr which then dissassociates the LR photo with anything on Flickr. I found another (cludgy) plugin which can associate photos in LR with photos on Flickr and that fixes the link between the two. But again, republish from LR and a new copy shows up.
Any ideas? This has been driving me nuts. I haven't found any special permissions or settings on the Flickr set or within LR which would explain why this one set is affected and no others. I don't want to delete the set on Flickr and lose the history. I'm trying to avoid having to manually update the images on Flickr where I would also have to manually update the titles, etc.

This has happened for LR4.2, 4.3, 4.4, and now LR5. The seemingly random nature of this bug is irratating. Last week while still on LR4.4 I published a photo, changed it, and was able to republish it without issue. Today on LR5 I published a set and went to republish a handful of photos only for them to be added as new photos to the set. LR5 indicated that they were photos to republish and not new ones to the set.

Single Sign On Questions

We are using Active Directory as the user store and SSO works as advertised. There is a single set of AD groups that define membership in the roles being used for security. The problem is that this means that if someone is in the financial group they can get to the financial data in all environments: dev, test and production. I am trying to figure out a way to limit access in the dev and test environments. I thought I could do it by adding a filter for a particular group on the All Users Filter in the AD provider. While this does limit the users in the security realm it doesn't prevent users not in that list from connecting to OBI through SSO. Any Ideas?
Another issue is that every instance that I have put SSO on it has broken the validateAnalysisCriteria logic that had been implemented in Answers. The system can no longer find the mycriteriablocking.js file where the code is. If you put the code into the answerstemplates.xml file it works. But I have run into problems with the size of the code that can embedded like that. If it gets over a certain size it no longer works. Putting it in an external file allows more code and thus a more complex query. But after implementing SSO it can't find the file referenced in the answerstemplates.xml. And if you roll SSO back off it still does not work. We use the validateAnalysisCriteria to prevent the combination of certain fields in a query. Perhaps there is another way to implement that kind of logic?
OBIEE 11.1.1.6.2 BP2
Windows 2008 R2 SP1

dirkt wrote:
We are using Active Directory as the user store and SSO works as advertised. There is a single set of AD groups that define membership in the roles being used for security. The problem is that this means that if someone is in the financial group they can get to the financial data in all environments: dev, test and production. I am trying to figure out a way to limit access in the dev and test environments. I thought I could do it by adding a filter for a particular group on the All Users Filter in the AD provider. While this does limit the users in the security realm it doesn't prevent users not in that list from connecting to OBI through SSO. Any Ideas?Log an SR with O. Quick workaround to stop other AD groups from accessing BI is by restricting access to OBIEE for that authenticated-role (which is everyone) who is a valid user in LDAP, you can restrict Access Home Page from Manage Privileges screen in OBIEE Administration screen.
Give Access to Home access only to the Roles you want to give access to OBIEE, who ever is not part of these roles cannot access OBIEE.
Another issue is that every instance that I have put SSO on it has broken the validateAnalysisCriteria logic that had been implemented in Answers. The system can no longer find the mycriteriablocking.js file where the code is. If you put the code into the answerstemplates.xml file it works. But I have run into problems with the size of the code that can embedded like that. If it gets over a certain size it no longer works. Putting it in an external file allows more code and thus a more complex query. But after implementing SSO it can't find the file referenced in the answerstemplates.xml. And if you roll SSO back off it still does not work. We use the validateAnalysisCriteria to prevent the combination of certain fields in a query. Perhaps there is another way to implement that kind of logic?
OBIEE 11.1.1.6.2 BP2
Windows 2008 R2 SP1Check the below links by Shahed:
http://deliverbi.blogspot.com/2013/03/obiee-11g-blocking-analysis-enforcing.html
OBIEE 11.1.1.6.8 Analysis Blocking if (!tValidator.dependentColumnExists("
HTH,
SVS

ICR - Single Sets (FBRC004)

Similar Messages

Maybe you are looking for