ICR - Upload multiple files for same company code?

Hello,
I have a question regarding the file upload functionality for ICR.
The file has to be prepared in MS Excel and then saved as tab delimited, but MS Excel has a limited number of rows.
So ....if one of my companies needs to upload more than one file for the same process/period because of this number of rows limitation, would that be possible? How is it handled and how we do we prepare the system for it?
Thanks for your help.
Regards
Isabel

Hello Isabel,
Actually this question is not quite answered yet...
The problem is that during data selection you can only choose one file per company/seqnr. In your sceneario each file represents a data source. So you need to create one entry per file in FBICRC01010 (e.g. FBIC032). If you were to run data selection once and choose one file and then run data selection again and choose a different file, the data from the first file would be deleted.
And you can split up a document in the middle. ICR considers each data record individually. There is no balance zero check or anything - since you usually transfer individual line items anyway.
Best regards,
Ralph

Similar Messages

Restrict PO creation for multiple plants for same company code

Hi Gurus,
We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happening. Is there a way that we can restrict by doing some customization change.
Any thoughts or ideas will be highly appreciating.
Thanks and Best regards,
Karun Kumar

Hi,
Said functionality is not available in SAP standard.
To avoid the same ,i can suggest implement release strategy for PO,and then higher authority / commercial team can check created PO,if multiple plants available in single po then they have the option of rejection for the same.
Or else check BADI-ME_PROCESS_PO_CUST,take the help from abapor and apply the restriction to select multiple plant in PO.
Hope this will resolve your query,
Thanks & Regards,
Sandesh Sawant

Multiple Cheques for same company code in Cheque Printing.

Hi All
I am currently working for a client requirement of cheque printing. The requirement is such that we have a multiple ( 3 nos) bank cheques for the same company code. These cheques have different alignment, so we can't use the same SAP Script Form (or can we?).
Can anyone of you please let me know how to go about this requirement?
Like, if we create multiple SAP Script Forms, can we assign them to the same company code in the configuration or is there any other way that we may do some changes in SAP Script form itself ( My guess being using a particular alignment for Bank Codes using IF Condition)?
The situation is such that we cannot make changes to the print program RFFOUS_C (neither make a Z copy of it).
Thanks in advance.
Harsh

Hi,
u have 3 differents cheques from the same company, but they should be from different banks...
what is the problem?
u can't use 3 cheques at the same time to pay for sth
check with ur FI consultant, so he'll explain u how it works.
Just copy a the sapscript F110_CHECK_IN to Z* and that's all
Regards

Different Payment advice config for same company code but diff Payment metd

Hi Guys,
Payment advice form is configured in FBZP in the PAYING COMPANY CODES and it is company code level, But I need to use different forms for different payment methods in the same company code, Whether is this possible in the config level or whether any BTE or BADI or User-exit exisist??
regards,
Prabhu

Hi Radhika,
We have to config a payment methd for a Check and in the path u mentioned we have Check form already,
And we need to config the Payment advice for this check.
So in FBZP - "Paying Company codes" we have configured the Payment advice form which works fine.
Requirement is we need a different Payment advices for this payment methd and this company code has several other Payment methd.
I hope this can be done by modifying the Payment medium program.
regards,
Prabhu

Two check forms for same company code

Hi
We are using two different house banks with in same company code. And we will issue checks from both banks depending on need. However check formats of both banks are different.
Question is how to set up different check formats as we can enter only one check form in FBZP by company code.
Any help in this regard really appreciated.
thanks

closed myself

Restrict users with the same company code

Hi All,
I have developed editable ALV which allows users to edit and delete records and save those changes in database.
Input is Company Code , Document Number and Fiscal Year.
Now I want to restrict multiple users trying to edit/delete records with same company code at a same time.
Example:
User A is editing records for company code 1250.
If User B tries to access for same company code 1250 at the same time, it should return an
error message saying “Table currently locked by User A”.
and also want to restrict the records if multiple users are trying to edit/delete the same record at
a same time,I should give an error message.
Thanks,
Arpita

First perform some search on Lock Concept in online help (ABAP Programming (BC-ABA), The ABAP Programming Language, Saving Data Externally, Data Consistency, The SAP Lock Concept or The SAP Lock Concept (BC-CST-EQ), SAP Lock Concept)
Then use or create thru SE11 a lock object for your table (keys must start with mandt + Bukrs, to not interfere with standard locks, e.g. EFBKPF, you may create your own z-structure and an associated lock object) and before reading data check the company code is not yet locked with ENQUEUE FM, release the lock is either implicit at end of transaction or triggered thru DEQUEUE FM or COMMIT/ROLLBACK WORK (depends also on your choice on _SCOPE Parameter value).
Regards,
Raymond

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

Different Bank charges GL account for two company codes with same COA

Hi,
While configuring OBXK ( Automatic GL account for bank charges) , I see there is provision to enter only one GL account per chart of accounts.
We have two company codes using same chart of accounts but different bank charges GL account. Please tell me how to configure this.
Thanks,
suresh

Hi,
Thanks Krishnan and Chandra.
I agree with you it could be the same GL account for bank charges, but the business requirement is such that in one of the two company codes, bank charges are required to be tracked separately to be subsequently transferred to the other company code. This means two separate GL accounts are required for two company codes which needs to be configured in OBXK.
Hope this clarifies my query further.
thanks,
suresh

Multiclip on FCP 7 with timecode: multiple files for the same camera have different Angle

I have FCStudio 7 with OS 10.6.8
I just filmed a concert with 6 cameras (Sony XDCAM). They are all timecode sync'd.
For various reasons there are multiple vid files for each camera (i.e. 172_003 thru 172_006 for camera 1).
I imported into FCP 7 using SonyXDCAM plug in with no problems. Each camera file group was given its camera number as the Reel Name (i.e. Camera 1) and that camera's number as its Angle Name (i.e. 1).
Now when I try and create a multiclip using all six cameras, instead of keeping all the files for a specific camera under a single angle name it treats each file as its own camera angle. It treats each file as an individual camera instead of having the files flow as a single clip from a single camera based on their timecode. In viewer I have 8 different angles for a single camera (because of 8 files). In the make media window for multiclip, the Angle Name is different for each clip but its position is still aligned to its timecode.
I worked the same project last year and the multiple files for each camera lined up fine, based on its timecode value and camera/reel name. I can't see what has changed.
I need each camera's files to sync under that camera Angle Name, and for the files to play in the same angle spot in viewer.
All advice welcomed as I'm in a major time crunch to complete the job.
Thanks.

Well why not just prebuild each angle in its own sequence with sequence timecode matching the source timecode? Export with current settings and import these files back into fcp and then create your multiclip.

How to lock multiple user for a transcation code at same time is der any tc

how to lock multiple user for a transcation code at same time is der any tc
suppose i hav 15 user and i want to lock 10 user for mm02 who can i to it

Basis can do a export and import transport, still if don't have connection between boxes.
or
check this
http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
a®

Multiple web catalog files for same rpd

Is there any way to run multiple web catalog files for same rpd in OBIEE?

Why do you want to do that? Why not merge them into one? You run seperate presentation servers againt the same RPD.
Regards
John
http://obiee101.blogspot.com/

Multiple RA Key in same company Code

Hello PS experts,
Our client require different RA method ,so we have different RA key under the same company code.
One of them is POC method based on Progress analysis and other is normal Rev .Based.
Based on this I did settings in OKG8. I mean for the same company code I have COSR, POCI ,POCS and VLRV.
Only POCI or POCS should be picked when I run the RA with POC method.. Since we have VLRV also there in same company code , system pick that too.
Any help?
psconsultant
Edited by: psconsultant on Feb 18, 2009 1:09 PM

I could able to make it work by assigning seperate line ID for VLRV

Multiple credit control areas for 1 company code

Hi experts,
My client is using ECC6 version and they activated credit control area, as I know that 1 company code can have 1 credit control area and 1 credit control can be assigned with multiple company codes,. but in one of my client company code is assigned to 4 credit control area through
u201CFinancial Accounting (New)- Accounts Receivable and Accounts Payable-Credit Management-Credit Control Account-Assign Permitted Credit Control Areas to Company Codeu201D-
Can anyone let me know how this functionality will work? Any additional impact will be there when compare to 1:1 scenario? And what are the details we need to update in FD32 when we assign multiple credit controls for 1 company code.
Regards
babu

Hi,
The multiple assignemnet of credit control allows you to use multiple credit control for customers. Thus in FD32 you can use these assigned different credit control area and maintain the credit limit for each area.
Regards
Milind Sonalkar

Can Equipment No same for 2 Equip in different Plants of same company code?

Hi Gurus,
            Please tell me if there is any possibility of having same Equipment No for 2 Equipments in Different Plants.
            The 2 plants are in the Same Company code.
            e.g. Equip           Plant                Company Code
               1) Equip_DIE    Plant1              A
               2) Equip_DIE    Plant2              A
           If it is possible how the Equipment histroy and Breakdown history is updated in the PMIS.
           Also tell me the advantages and Disadvantages of keeping same Equipment no for 2 diiferernt Equipments or otherwise keeping different equipment no.
With best regards,
Narendra Dere

Hi Pete ,
          Thanks for your valuable reply.
          Actually I am doing implementation for 5 plants within same Company Code.
          They are geographically distant (say 50km from each Other.)
          The Finish Product is same but the method is different.
          They have already assigned some Equipment Numbers in the Plant for Regular Maintenance Activities.
          Since Planning and Maintenance can be done at the different Plant and team of the MAintenance is different, they dont hv anyproblem if equipment number is same. Otherway they wll have the added advantage that they can continue with there own Equipment no which can be same in differnt Plant.
       e.g 800TONPRESS - Plant1
            800TONPRESS - Plant 2.
   With best regards,
   Narendra Dere

Two same ERP # for 2 company codes

Hi!
I noticed that someone set up same ERP # for two different company codes for a same client.
What kind of issues this can bring from account receivables cycle perspective?
Would someone recommend to make different ERPs for different company codes?
Thank you.
Let me know if need more precision.

Hi,
If you want to use same COA for two company codes, you need to assign the same COA to those company codes with Tcode OB62.
Create all your GL accounts centrally with Tcode FS00.(COA level as well as first company code level), then copy all the GL accounts to the other company code with Tcode FS15.
Hope this will enough for this issue.
Thanks,
Srinu

ICR - Upload multiple files for same company code?

Similar Messages

Maybe you are looking for