ICS 2.x: How do I change the hour display format from AM/PM to 24 hour mode in the JavaScript?

How do I change the hour display format from the AM/PM mode to the 24 hour mode
in the JavaScript?

To change the hour display format, 

<OL>
<LI>Open the loadpoint/CalendarServer/cal/uicust/en/main.html
file.

<LI>Go to the "Misc." section.

<LI>Edit the following line: 

i18n['def clock'] = '24';
</OL>

laugh
how analog.
neat idea, but i need to see that part of the screen after login on a fairly regular basis, otherwise i might seriously do this.

Similar Messages

How do I change the default timezone for user calendars?

The default timezone for new calendars is "America/New_York." How
do I change the default timezone to my local timezone?
To change the default timezone, perform the following steps:

<OL>
<LI>Go to the bin/data/default_user_prefs.xml
file.

<LI>In this file, change the values for the
"icsTimeZone" and
"ceSingleCalendarTZID"
parameters. The default settings will appear something as follows:


Changing these two parameters will change the timezone in the Calendar user
interface.

<LI>In addition, go to the
bin/config/ics.conf file.

<LI>In this file, change the value for
calstore.default.timezoneID

Changing this value will enable the server to pick up the new timezones.
</OL>

Please note: The values you enter for the above parameters must be valid
timezones defined in the
bin/data/timezone.ics
file.
Related Technote:

20000330-7: iCS 2.x: How do you change the
default timezone in JavaScript? 
see article 4322

Colin,
You may substitute any text you like for the "Placeholder Text", as it is called, in Pages. Click on the existing placeholder text and type something more to your liking. Do this in as many places as your particular template of interest demands. Then, Format > Advanced > Define as Placeholder Text. Lastly, File > Save as Template.
Now that you have defined a Custom Template to your liking, you can go to Pages Preferences and under the General tab's first section, define the new custom template as your default for each new document.
Regards,
Jerry

How do you change the amp value of a battery

I am trying to make a voltage regulator for my car.
My car puts out 14v and 500 amp battery.
I can not tell Multisim that I want a 500 amp battery.
How do I change the value?
This is important because I have to make sure I have at least 15amps output. No way to do this so far. Program is worthless.

Shane711,
Most multimeters can only handle ten amps or less, so it is not surprising that yours burned up.
How did you connect the multimeter while trying to measure the battery current? Cars have large, heavy wires connected to the battery because the large currents would destroy smaller wires. Your multimeter does not have connections or wires anywhere near as large as the battery cables. To measure the current you need to disconnect one of the cables and connect the meter in series with the cable. If you attempted to connect the multimeter in parallel with the battery as you would to measure voltage, you shorted the battery through the meter and probably had hundreds of amperes flowing, at least until a fuse blew or some wire burned out.
Your specification for the voltage regulator does not make any sense. A voltage regulator has an output voltage specification - yours is 12 V. It also has an input voltage range specification. You did not specify an input range. The output current is determined by the load via Ohm's Law. The specification includes a maximum current - Is that what you meant by 15 amps? Some regulator circuits also have a minimum output current specification, often a few mA. Optional specifications include tolerances on voltages, power dissipation, transient response characteristics, and so on. The design of the circuit depends on all of these specifications. You will probably not find a single device which operates as a voltage regulator with 12 V output at up to 15 A. A regualtor like that will probably contain one or more power transistors, some ICs, resistors, diodes, capacitors, and inductors.
Any simulator is only as good as the models used. From what Tien P. said in his earlier post, the battery in Multisim is an ideal voltage source. If so, it should easily produce currents of 1000 amperes. Just put a 12 milliohm resistor across the battery. As I said yesterday, you will need to create a battery model circuit which has the characteristics you want in your battery. What do you expect the output voltage to be at the battery terminals when drawing 1000 amps? What should it be with no current drawn? What should it be at 1, 10 , and 100 amps?
Lynn

How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

In Pages 5.0 How do I change the highlight color?

In Pages 5.0 How do I change the highlight color?

Oh! I understand now. See screenshot below. It's called "Character Fill Color":

In the Menu Bar, under File, then Open File, how do I change the selections?

I have Firefox 11.0 and Windows 5.1 (2007). In Firefox, I click on FILE in the Menu Bar, then OPEN FILE (Ctrl+O), and I see a small box; it says Look in: Mozilla Firefox. Below is a selection of files within the folder Mozilla Firefox. To the left is a column of four other folders: Downloads, My Computer, John, Lori. The last two are obviously two of the folders I've created on my computer, using Windows. But I don't know how they got here! I have no recollection of customizing this particular Firefox menu option by adding those folders, nor can I figure out what to do in order to further customize it. Can anyone tell me: (1) how can I change the original "Look in" option so that it opens with something other than "Mozilla Firefox" (which, after all, I never need to access)? (2) how can I add/delete/change the choices offered in the column on the left, so that different folders are listed? (Currently, if I want to access my Windows folders/files, I first have to minimize the Firefox screen; this seems to me a nice shortcut, but I'd like it to include shortcuts to the folders I use the most, which does not include "Mozilla Firefox"!) (3) Is this actually a Firefox feature, or is it a Windows feature? It does look like Windows (Windows style, Windows folders), but it appears only in the Firefox Menu Bar, along with Bookmarks, Tools, etc. Thanks!

This sounds like a Windows thing ( You can post a photo and I can tell you for certain). Those folders are Windows system created folders that your computer has had since it was installed, all Firefox does is use the Windows File picker, which is what you see when you open that window. So, to customize you'd have to do that from Windows Explorer (not Firefox).
The Window should however remember what folder you were in last.

I have changed from an iPhone to a Sony but when my wife send a message on her IPhone it still gets sent as a iMessage how do I change the settings

I have changed from an iPhone to a Sony but when my wife send a message it still gets sent as an iMessage how do I change the settings

Hello, Vespa Boy125.
Thank you for visiting Apple Support Communities.
Here are the steps that you will need to process on your line to remove your number from iMessage.
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
Cheers,
Jason H.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

My email address on my i phone is old and i can not seam to change it. this results in my not being able to log in. How do I change the email address?

How do I change the log in email ID on my I phone. I have done so on my account but can not do so on my I phone and it wont let me log in

Settings>Store...tap the ID shown...sign out...now sign back in with the ID you want to use.

My rescue email is a deleted email and i have no idea what the answers are to my security questions- what do I do? How do I change the rescue email?

My rescue email is a deleted email and i have no idea what the answers are to my security questions… what do I do? How do I change the rescue email?

You will need to contact Apple support. You can use the link in the quote below from If you forgot the answers to your Apple ID security questions - Apple Support
If you couldn't send a reset email, don't have a rescue email address, or can't access email at your rescue email address, contact Apple Support.

Wrong Apple ID: How do I change the Apple ID prompt when Updating All Apps?

How can I change the (wrong) Apple ID from the password prompting dialogue when I am already signed in Apple Store with my own ID?
More details of my problem:
When I try the Apps' Update-All option in my iPod 4, the password dialogue prompts me with my girlfriend's Apple ID; YET, I AM signed in the Apple Store with MY own Apple ID.
I have already verified my ID under Settings/Store. I have also signed out, signing back in with my Apple ID, just in case. No problems there, for I DO sign in with my own ID ok. The problem is just the prompt dialogue for password, when I try to use the 'Update All' feature it prompts me for password with her ID, not mine.
If I go back to Apps and choose the Categories (or Top25) menu, at the bottom of the page, it shows me signed in (my Apple ID). If I try to update one Apps it will do ok. But if I try to Update All it will prompt me for password using her ID, waiting for me to type in HER password. I cannot change the Apple ID on that dialogue (static). If I use my password, it will return the "wrong password" dialogue.
How can I change the prompt for the Update All? What is going on here that I AM signed in but my iPod prompts me with her ID. My iPod is registered under my Apple ID. I have already tried the Hard reset by pressing Home and Power buttons simultaneously, to no avail. I am also using my own network to go Online. I am also with the latest OS in my iPod and my Mac's iTunes.
Thank you!
PS This problem is not occurring in my iPhone 4 (same account) nor my Macs.

Does not work for me. (My iPhone is not jailbroken.)
I downloaded a paid app "Imray Marine Rules and Signals v1.5" in the USA with my original account (Account1) then moved countries and needed to create a new Apple account (Account2). If I get 'Info' for the app, it is registered to Account1.
A new version 1.6 of the Imray app has now been released.
I have set up only Account1 on the iphone (settings - App Store) and both Account1 and Account2 in iTunes on my computer. My iphone always tells me there is 1 app to update. However, when I try to update this app on my iphone, I get asked for the password for Account2, then the download fails as it says I do not have a paid earlier version to update.
When I am logged into my computer iTunes as Account1 and try to update it on the computer iTunes, it says there are no apps to update (although my version of the app is definitely the old version).
When I search for the app in iTune Store, it tells me I have already downloaded version 1.6 of the app and the download button is grayed out.
If I temporarily delete the app from my iTunes then try to re-download, I am asked to purchase it again.
If I log into iTunes as Account2 then try to download it, I am asked to purchase it.
Any ideas? I feel I have tried every option and no success.

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

How do I change the IP address of my PC connected to a EA3500 router ?

I have a PC with Windows 7 connected wirelessly to a EA3500 router. How do I change the IP address on my PC ?

What type of ip address were you talking about? Is it the private ip address that the computer gets from a DHCP server/router or the public ip address that the computer gets from your ISP? If you were talking about the private ip address (e.g. 192.168.1.1) then you can easily assign a static ip address to your computer itself. If you were talking about the public ip address then you don’t need to worry of changing the ip address it’s because the ip address will change from time to time.

ICS 2.x: How do I change the hour display format from AM/PM to 24 hour mode in the JavaScript?

Similar Messages

Maybe you are looking for