ICS Sense 4.0 in the wild... Check it out.

I noted a article from Android Central that covered hands on experience of the up and coming Sense 4.0 that will be compatible for HTC ICS devices, check the post out at http://www.androidcentral.com/htc-sense-4-complete-walkthrough

oops...yes, you are right. But the thing is, if album view isn't going to just show ONE album cover in the window for all the songs on the album, then each pic of the cover might as well have the actual title of the song being referenced on it.
The way to keep one photo as the designated album cover, for all songs, is to make that foto the FIRST in the series for each individual song's collection of artwork. When a song is playing, click "get info" from "file". Choose "album artwork" and drag-and-drop each piece of artwork into the window, then arrange so that the designated album cover is first in the group.
What I wanted from Album View was ONE foto of each album, and then by clicking on the foto, the album contents would appear in the playlist window. Too much to ask, I guess

Similar Messages

Why is the spell checking grayed out in LR5.6?

I am using LR5.6, under the Edit menu on my Mac there is a spelling and grammar option but it is greyed out in LR? How can I spell check my Book?

Seems to be an oversight, since you can invoke spelling on most other text fields in LR (e.g. in metadata entry). You can file a bug report at the official Adobe feedback forum: Recently active topics in Photoshop Family about Photoshop Lightroom.

Cannot complete scheduled refresh when document library requires check in/out

Hi,
I have set up a report with a scheduled refresh but it fails with an error if the document library requires check in/out. In the refresh history it shows the error:-
'We couldn't save the refreshed report. ExcelServices operation ended with error: SavingWorkbookNotCheckedOut Correlation ID: 89eb08a4-b14d-45b6-8a34-581e505b67fe'
If I remove the requirement to have the workbook checked in/out then the refresh works fine.
Is there a way to have this work on document libraries when required check in/out is enabled?
Best regards
Aquila

Hi Mini,
Thanks for taking the time to help with this.
Yes removing the requirement for check out does work, as was stated in my original post "If I remove the requirement to have the workbook checked in/out then the refresh works fine.". This is the workaround that I'm currently using but there
are some reports where we would like to be able to prevent multiple users editing at the same time hence the required check out.
We would like to be able to have required check out and scheduled refresh (because if you have cake you're going to want to eat it!), but I'm guessing it's one or the other at the moment.
Cheers
Aquila

Content Server 6.1: How to disable check-in/out opertation?

Hello,
We have developed a custom application that would process the content items through a workflow. Our business users are frustrated with the content items being accidentally locked out. They would edit a content item and would approve it to the next stage without checking in the content item. As such the items remains locked by them and the portal administrator has to manually unlock the item through content server explorer.
Is there a way to disable the entire check-in/out operation? Or as alternative is there a way to automatically check-in the content item when the user approves the content item?
Thanks
Jignesh

Hi Jignesh, I apologize, I thought I was on 6.1 but in fact I'm on 6.2:(
I assume they are fairly similar though.
The solution I was talking about is to go into your publisher explorer and set the folder security in such a way that the checkin/checkout buttons don't appear.
I dont know which setting that is off the tob of my head but I believe its Submitter. They will only see one button called "Submit for Approval". So that could be for your workflow initiator. Then the remainder of your workflow people can have the same security option, except the final publisher who will need Editor permission to see the Publish button, which will also allow them to checkin.
Let me know if that helps!

How do I disable the Plugin check at startup in 17.0.2 esr?

In testing the latest 17.0.2esr I keep getting the plugin check at startup. Even logged in as a Standard user with no Admin rights I still get this page which makes no sense since Standard users do not have permissions to install software. This is supposed to be the Enterprise version of Firefox which in my mind means that all updates and controls are left to the dicretion of an Administrator and not an end user. Is this a bug in ESR? How do I eliminate this?

This can happen if there are plugins installed that are block-listed by Mozilla.
* https://addons.mozilla.org/en-US/firefox/blocked/

Compared to Word, the spell check is very weak. Am I missing something?

I am attempting to switch from Word to Pages but I find the spell check is very weak. Am I missing something?

Barry
I sense a pressing urgency in Ken's request.
Peter

I can't use word because a box keeps popping up saying that it can't find the spell check files?

I open Word and there is a pop-up message saying that word cannot start the spelling checker because the files may be missing and to make sure that the spell checker files are installed or use the Microsoft installer to install spell checker. I have never had this problem with Word before and spell check has always been fine. What should I do?

Since word is made by Microsoft you should post your question on their own forums for their Mac software as Apple Communities only provide support for Apple products:
http://www.officeformac.com/productforums

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Installing Existing Adobe Acrobat 9 Pro on new computer - The "Upgrade Check"

I recently purchased a new computer (Windows 8) to replace my old computer (Windows XP). I had purchased and installed Adobe Acrobat Pro 9 on the old computer in September 2009. At that time I had the serial number of the previous edition of Adobe Acrobat to load into the Upgrade Check screen when installing Acrobat 9. I just deactivated the Adobe Acrobat Pro 9 from the Windows XP machine and downloaded it to the Windows 8 machine and the install went well (still had the serial numbers for the Acrobat 9), until after the reboot when the "Upgrade Check" screen popped up. I don't have the slightest clue what the serial number for the previous version of Acrobat was, I don't even recall what version of Acrobat I had. How can I continue to install my Acrobat Pro 9? I have been using it successfully for three plus years!
Thanks.

If you no longer have the AA7 information, you will have to contact Adobe to determine the software key you had before to allow the installation. Hopefully you had registered your previous product or at least the installation.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

Retaining the old schedule lines after the ATP check in the sales order....

Hi Experts,
I would like to retain the old schedule lines after the ATP/GATP check in the sales order for certain conditions.
I don't want to change XVBEP,IVBEP,VBEP contents in the user-exit..
Is there any standard sub-routine or function module to reatain old schedule lines in the sales order so that the schedule lines will not update with the new values after the ATP check ?
Thanks
Rayudu

In Include LV03VFMM, you have:
* Userexit availability
PERFORM USEREXIT_AVAILABILITY_IN USING DA_ATPPR.
There may be an option to implement some logic in here. However, I tried changing the value of MVERF_POS-EINTEIL[1]-VFPKZ to initial. This will ensure that when FM AVAILABILITY_CHECK_CONTROLLER is called that the following IF statement is untrue:
CHECK NOT P_ATPCSX[] IS INITIAL.
as P_ATPCSX[] Table[0x648].....
However, this will just mean that the 2nd confirmed schedule line (assuming we have > 1 schedule lines) will have a confirmed quantity to zero.
EXIT_SAPLATPC_001 could also be used. However, when I removed the "X" from CHKFLG, I get the same result; the 2nd schedule line will revert to zero.
They were the only tests I tried; I cannot think of any other ways around this....

How to delete confirmed schedule lines, without executing the ATP check?

Sales and Distribution: Concerning ATP (product allocation)
Situation:
Step 1: An order is created with priority low. Quantities are confirmed for line items.
Step 2: A second order is created with a higher priority. No confirmed quantities.
Rescheduling program (SDV03V02) is then executed. This selects and sorts the orders in the correct order.
The confirmed quantities for the first (low priority) order should now be freed up, to be able to allocate those quantities to the second (high priority) order.
The problem I am facing is that the confirmed quantities are NOT released.
We cannot use BAPI_SALESORDER_CHANGE or SD_SALESDOCUMENT_CHANGE to delete or modify the schedule lines, because these function modules execute the ATP check again. And when that happens, quantities are again confirmed and assigned.
How can we get rid of the confirmed schedule lines, without executing the ATP check?
Thanks,
Edwin.

Found a solution to the problem:
In the Rescheduling program we export a parameter to the memory, to make it possible to delete schedule lines without executing the ATP check.
Deleting of the schedule lines is done with a BAPI, which will call the ATP check automatically for ATP relevant materials. This we want to stop from happening (only when calling the BAPI).
After the BAPI has been called we FREE the MEMORY ID.
The parameter is imported again in Customer-Exit EXIT_SAPLATPC_001.
Transaction.. SMOD
Enhancement.. ATP00001
Component.... EXIT_SAPLATPC_001,
Include...... ZXATPU01.
The customer exit is used in function AVAILABILITY_CHECK_CONTROLLER, just before calling function 'AVAILABILITY_CHECK'.
Simply refreshing the ATP tables in the customer-exit, will prevent the ATP check from being executed (because we removed the list containing the materials for which the ATP check needs to be done). As a result, the function 'AVAILABILITY_CHECK' will not be processed.

The "Delete" check box is not working in a table

I have created a Master-Multi Detailed groups page, I can "Add Row" to the Master table, which is saved to the DB okay, but I cannot Add rows to the DB in the detailed table, and I cannot Delete the records (by checking the delete check boxes and hitting "save"). Independent if these record are saved in the DB or not.
Any idea what might be happening
Is it related that I do not get the "Save" confirmation message when I add a new record and hit save for example? How do I get this confirmation message back?
Thanks in advance
Mohamed

Yes, that might well be related.
You probably performed an ADF drag and drop action in one of your pages, which causes the default ADF Phase listener to be added to the faces-config.xml. If you remove this <phase-listener> entry everything should work OK again.
Steven Davelaar,
JHeadstart team.

ICS Sense 4.0 in the wild... Check it out.

Similar Messages

Maybe you are looking for