ICS update - Xperia GO - performance issues

Hi,
I am from INDIA, I got the ICS update for my Xperia GO and I feel that the performance and the speed of the phone has come down a litte...
I tried stopping some of the apps which are running in the background but still it lags a little.
I am facing this issue after my phone got updated to ICS 4.0.4.
Did anyone whose is having Xperia GO ICS 4.0.4 facing similar issues....?

Same problem.
Games are not fun anymore.
Basic operation on main menu became much slower...
And Sony support sais they are not supporting downgrading, so there is no official way of doing it back!
Ah: and did Update repair... something like 15 times. No result.

Similar Messages

  • Camera app pop up automaticall after ics update xperia s

    After Updating to ICS my xperia s camera automatically popping up while i unlock the screen even try to dial a number before i can do any thing the camera application pop up very very upsetting indeed

    Hello india286
    Please use Pc companion in Repair mode to try to fix the installation:
    Run the Pc companion Software
    Turn the phone off and disconnect it from the computer
    1. No matter what the program says do not connect the phone until you complete step 9
    2. In the welcome screen if asked click on start, Next you will be shown what media go offers, click on "next" then you will see a presentation on what support zone offers, click on "Finish"
    3. In the next section from "support zone" and "media go" new select "support zone"  and click on start.
    4. On the next page select "Software update" and click on "start"
    At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 12
    5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "repair Phone".(the program will issue you a warning on the content that you will lose during the update)
    6. Choose the option to continue.
    7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
    8. Choose the Phone from the list (close to the bottom of the list)  click on the icon for the phone and then click on "next"
    then you will see a new section telling you how to connect the phone. (don't connect it yet)
    At this point the phone must be off and disconnected from the PC.
    9. Connect the cable to the PC not to the phone, then follow the instructions on screen to connect the phone, if done correctly the program will say "the update of your phone has started..." (in some cases a message of  "Installing drivers" will appear before the message of "the update of your phone has started..."  is shown.)
    10. If you failed to follow the steps correctly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar", If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
    11. If the PC Companion proceeds correctly wait for the update to finish and follow instructions on screen.
    Dear customer,
    12. If "unable to install update components"
    1. Close Pc companion
    2. Install Java from: http://www.java.com
    3. start Pc companion again and try to do the software unlock process once more.
    If this fails let me know, you might need to send the phone in.
    Best regards
    Francis.

  • Xperia arc S LT18i - contact issues after ICS update

    I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

    Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Issues in ICS update for Xperia Arc

    I am using Xperia Arc. I have done the ICS update recently and I am totally disappointed with this update. The thing is some features already there in the 2.3.4 version of android is not there in ICS update.
    When long press the power button ‘take screenshot’ option was there in the 2.3.4 but in ICS that option is not there.
    I have seen the beautiful lock screen in ICS forums but it is missing in the ICS update
    Music player is still same like 2.3.4 android version. I was expecting the custom equalizer as like Arc S . but it is not there in Arc ICS update
    Google says recently opened apps will be displayed in the home screen in ICS. But its missing in the my ICS update.
    Google says live and transformation effects are there in ICS but I am not able to see those things in my Xperia Arc after ICS update.
    Kindly let me know is there any solutions for the above issues..
    Thanks
    Manivannan

    1. You take screenshot by long pressing power and volume down button (booth at same time) in ICS, thats how google has made it.
    2. What beautiful lockscreen are you talking about? Sony has kept the lockscreen same because thats the lock screen many users are used to.
    3. Yes music player is same. I have an Arc S, the music player is same. The music player with equalizer is in Xperia S not in Arc S.
    4. Google never said any such things. You can see the recently opened apps by LONG PRESSING THE HOME BUTTON and can close them by Swiping it off the screen.
    5. Once again Google didnt say any such thing. If you want to change transision effects and stuff use Apex Launcher instead of Sony's launcher. You can get Apex launcher for free from Play Store.
    Hope i helped. If you have any question ask i'll try to help.

  • Will ICS update fix overheating issues on Xperia Mini?

    Like seemingly thousands of other people my Mini was turned in to a brick because of overheating causeing the back and menu buttons to constantly trigger. (This problem: http://talk.sonymobile.com/thread/23778?start=960&tstart=0). In a different country to place of purchase so warranty doesn't work and its been sitting in the drawer doing nothing for a few months.
    Question is, will the same problem persist after the ICS update? Will all those people like myself who were sold a dud be able to take them out of the drawer? I literally have to open the freezer and rub the phone over a bag of peas for it to work. (Nice engineering there Sony)
    There is apparently a fix that involves rooting the phone and running a script to reduce touch screen sensitivity.. but I have neither the time nor technical proficiency to be sure that I wouldn't mess it up. Why Sony hasn't implemented a touchscreen sensitivity slider in the phone options.. I don't know...
    Anyway.. given that it is a whole new operating system, will the issue still be there? Or should us Mini owners just forget it and throw the thing in the bin?

    I had also the same problem. After a couple of months I gave up and bring the phone to the service center. They have fixed it in half hour by doing calibration. I have made a backup of all applications since the procedure erase everything on phone (not sd card). Make sure you sync contact with google or export them to sd card. Now its working fine.  They said that the program update will not fix this.
    As I can see and I read from service paperm they had change the whole screen with front cover , microphone and a usb cap. Who knows why.

  • Not Updating Customized Table when System having Performance Issue

    Hi,
    This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
    Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task).  But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
    I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
    Please advise if anyone has any idea why is this happening. Many thanks.
    Regards,
    Janet

    Hi Janet,
    you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
    Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from  FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
    SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
    Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
    I don't know your situation and goal so this is all I can tell you now.
    Good luck!
    Regards,
    Clemens

  • Xperia neo v ICS update problem.

    Xperia neo v ics update is available for india.
    I am in b/w update process seems like it stuck at 2. Preparing - initialising... from n hour.
    Tried again but still facing same prob.
    Solved!
    Go to Solution.

    Many are facing this problem but for many it has been sorted out,, please have patience,, servers are overloaded. you will get the update
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • After ICS Update of almost a month My Xperia Neo V is not booting, Once i switched on my bluetooth Device

    Hi,
    After Official Sony ICS update 4.0.4, my neo v is not booting, once i turn on my bluetooth device. Can any one help me on this. I have tried all the possible ways to boot,. Bu finally everything ended with vains.
    Regards,
    Sudhan

    If you get some form of response (vibration, blinking LED etc) when you try to power it on then please try running a repair:
    1. Before you start you have to download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
    and install it on your PC.
    2. Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
    Note! For some models you will be prompted to do a backup prior to the update and then restore.
    3. Install and open PC Companion then select Support Zone.
    4. Phone Software Update.
    5. Start.
    6. Repair Phone
    7. Continue
    8. Accept data removal
    9. Next
    10. Wait for prepare
    11. Select Phone
    12. Follow the connection steps
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Updating Xperia sola to ICS

    Hi,
    I am using Xperia sola for the past 1yr i am having gingerbird OS in SOLA
    i want to know is that good to update Xperia sola to ICS or use the sola with GB is best.

    There are a number of topics on this forum regarding this particular topic. It is very much a personal choice though I would advise reading through some of the other posts to gauge general opinion on the topic.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Performance issue in update new records from Ekko to my ztable

    I'm doing changes to an existing program
    In this program I need to update any new purchase orders created in EKKO-EBELN to my ztable-ebeln.
    I need to update my ztable with the new records created on that particular date.
    This is a daily running job.
    This is the code I wrote and I'm getting 150,000 records into this loop and I'm getting performance issue, can Anyone suggest me how to avoid performance issue.
    loop at tb_ekko.
        at new ebeln.
          read table tb_ztable with key ebeln = tb_ekko-ebeln binary search.
          if sy-subrc <> 0.
            tb_ztable-ebeln = tb_ekko-ebeln.
            tb_ztable-zlimit = ' '.
            insert ztable from tb_ztable.
          endif.
        endat.
      endloop.
    Thanks
    Hema.

    Modify  your code as follows:
    loop at tb_ekko.
    at new ebeln.
    read table tb_ztable with key ebeln = tb_ekko-ebeln binary search.
    if sy-subrc <> 0.
    tb_ztable_new-ebeln = tb_ekko-ebeln.
    tb_ztable_new-zlimit = ' '.
    append tb_ztable_new.
    clear tb_ztable_new.
    endif.
    endat.
    endloop.
    insert ztable from table tb_ztable_new.
    Regards,
    ravi

  • How to update this query and avoid performance issue?

    Hi, guys:
    I wonder how to update the following query to make it weekend day aware. My boss want the query to consider business days only. Below is just a portion of the query:
    select count(distinct cmv.invoicekey ) total ,'3' as type, 'VALID CALL DATE' as Category
    FROM cbwp_mv2 cmv
    where cmv.colresponse=1
    And Trunc(cmv.Invdate)  Between (Trunc(Sysdate)-1)-39 And (Trunc(Sysdate)-1)-37
    And Trunc(cmv.Whendate) Between cmv.Invdate+37 And cmv.Invdate+39the CBWP_MV2 is a materialized view to tune query. This query is written for a data warehouse application, the CBWP_MV2 will be updated every day evening. My boss wants the condition in the query to consider only business days, for example, if (Trunc(Sysdate)-1)-39 falls in weekend, I need to move the range begins from next coming business day, if (Trunc(Sysdate)-1)-37 falls in weekend, I need to move the range ends from next coming business day. but I should always keep the range within 3 business days. If there is overlap on weekend, always push to later business days.
    Question: how to implement it and avoid performance issue? I am afraid that if I use a function, it greatly reduce the performance. This view already contains more than 100K rows.
    thank you in advance!
    Sam
    Edited by: lxiscas on Dec 18, 2012 7:55 AM
    Edited by: lxiscas on Dec 18, 2012 7:56 AM

    You are already using a function, since you're using TRUNC on invdate and whendate.
    If you have indexes on those columns, then they will not be used because of the TRUNC.
    Consider omitting the TRUNC or testing with Function Based Indexes.
    Regarding business days:
    If you search this forum, you'll find lots of examples.
    Here's another 'golden oldie': http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:185012348071
    Regarding performance:
    Steps to take are explained from the links you find here: {message:id=9360003}
    Read them, they are more than worth it for now and future questions.

  • Why no ICS update for 2011 Xperia WT19i after August 2012

    Hi Sony
    Since long we are waiting for ICS update after 4.1.B.0.587 for 2011 Xperia Phone.  After August 2012, Not Update received.  Even 4.1.B.1.13 has been certified in December 2012. But Sony did'nt released any update after August 2012.  I am facing problem so many problem after ICS update of Aug 2012 4.1.b.0.587.  Camera problem (after flash light on takes more time to take photograph) lagy Dialer, LED problem, network selection  phone goes in WCDMA(pref.) / GSM from GSM ONLY ,when we restart mobile.2G/3G etc.etc.).

    Unfortunately we don't have any information on upcoming updates at all. All information is available at our blog:
    http://blogs.sonymobile.com/update
    There are already a ton of threads concerning updates.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Where's ics update for xperia u ?

    SO , sony xperia u won't get the ics update or what !!??
    another xperias got it ^_^

    Ahmed.Gamal Keep your eyes on the blogs.
    http://blogs.sonymobile.com/
    Not many days are left now :smileywink:
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • WHEN ICS UPDATE FOR XPERIA U WILL BE AVAILABLE IN EGYPT???????????

    ics update been released since september last year, its been more than 9 months and still no update!!!!!! WTF!!!!!!!!!!!!!!!!!!!!!!!!!!

    Unfortunately we are unable to confirm specific date for any particular firmware release due to the nature of the approval process.. For further information regarding the approval process please see here.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • ICS update issue.

    I received the ICS update on my RAZR this morning and was happy to receive it, but now the phone constantly reboots, Apps open, but the entire phone locks up within 30 seconds and then the phone reboots.  This is not a good user experience.  Anyone else having these issues or know how to fix them?

    Motorola recommends a factory data reset after downloading the update. I did it and update is much more settled now.  I'm not having any resets and it works far better than GB. I recommend downloading Google Chrome and using it as your main browser.  It works amazingly well with ICS and is certainly optimized for smartphone use. Videos play with Chrome.

Maybe you are looking for