ICSS_B2C Customer relogin problem "Enter a valid user id and password".

Hi Gurus,
In ICSS_B2C, I have login problem with the userid and password that i have created. I have maintained all necessary settings in XCM, reference user etc.,
I have configured icss_b2c Admin with value "CRM_SU01UserID" for component usertype in http: //server:port/icss_b2c/admin/xcm/init.do.
UserID is getting saved but when i try to relogin with the same, I am getting the message ""Enter a valid user id and password".
I tried with alias, su01i
Guide me Where all I can check to solve this?
Thanks and points will be rewarded.
urgent
Srinivas.

Hi
The User Id that you have created, must have been assigned to a BP in the tcode BP and role BUP005.
Goto the BP and check the Internet User tab
The user name that you are suppose to use is the one mentioned in the Internet User field in the Logon data dataset.
Hope this helps
Regards
Rekha Dadwal

Similar Messages

Enter the valid user name and password to login into the workspace

Dear Reader,
As we are working on System 9.2.0, the problem we are facing are as we log into Workspace we get a error "PLEASE ENTER THE VALID USERNAME AND PASSWORD TO LOGIN TO THE SYSTEM"; and the moment we access FR studio another error message pops up which says "COULD NOT CONNECT TO GSM SERVER HYPERION:1800" we have installed Hyperion BI/UI within the same folder and configured with same repository, Every service is successfully installed and configured, in the shared services we are able to see the BI+ node and we also have tried configuring the shared services and BI/UI , twice or thrice. Kindly suggest the solution for the same.

Hi Vikram,
Check whether your FR service is started and you database is up and running.
Regards,

You must supply a valid User Name and Password to log onto the system

he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve this

Hi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/

Enter valid user name and password

Hi,
I am unable to enter the software through manager password and as well as other user id also. I have also check the user table u201DOUSRu201D that table also missing in the DB. Also I tried in the previous DB. But same thing happen. Please help me.
regards
Sajal

Hi Mayank,
I suggest you to restore the database from a valid backup version. You are not sure if other database objects were deleted.
Regards,
Ruddy Avalos
Support Consultant
SAP Business One

Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
Has anyone encountered this issue?
Thanks,
-K

Thank you all for the responses so far.
On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
Thanks for any additional info anyone can provide.
-Ken

I can't set up Time Machine---Help! What "User Name" and password do I use

I finally got the Time Capsule and installed Leopard, but now that I'm trying to set up Time Machine, it's asking for a user name and password. I've entered the admin user name and password to my computer with no luck, then tried the name of the Time Capsule and the password for that, no luck there either. What the heck is it looking for? Thank you for any help you can give me!!!!

smithrj wrote:
Thank you for correcting me, I think it's time for bed.
Ray
Hey, I got left and right confused late one night No problem.
I mentioned it only because I once used that software and only because I checked it before upgrading to Leopard did I realize it didn't work too well, even with Tiger.
LaCie makes great hardware, but in the software area they are a bit soft.

My moms computer died we are putting the old drive into the new computer as a slave drive. how do I transfer all the bookmarks, user names and passwords from the old drive to the new drive?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/889318]]</blockquote>
Hello,
Sorry if this posted twice I am NEW. I thought I could just go back to what I typed and add to it. Mom had a computer it died they are putting in the old drive on the new computer as a slave. What are the steps I need to do to transfer ALL the bookmarks, user names and passwords onto the new computer. We will have 3 desktops do we have to do the same steps on each desktop? I do not want to re enter all the user names and passwords on the new hard drive. Old computer was Windows XP the new computer is Windows 7 Kathryn Schwartz

Duplicate - https://support.mozilla.com/en-US/questions/889318

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

When I enter my user name and password for my e-mail account, the page won't open

My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.

Thanks Peter.
Partial success in that I have been able to get mails onto the iPad - however....
Progress from a previous 'rumage' on problem discussions. I have succeded in setting up the iPad so that it receives emails from the sky address under 'MAIL' on the iPad. However trying to open in the 'usual' way - safari - then sky - then email - enter user name and password - I get the same result - it just returns to the log in menu for sky email with user name and password blank.
I had a previous problem with the sky mail ceasing to show recent mails, frozen in time on the iPad. Somehow by trying some reset instructions I was able to 'unlock' the iPad and all was OK until it 'froze' again. This time I clearly screwed up attempts to unlock, resulting in not being able to access email accounts via the Sky site !!

Problems with invalid user name and password

We have a one week old MacBook 2.2GHz basic white model that is generally working well.
However a problem has now arisen whereby on any attempt to shutdown or restart it won't accept the administrator user name and password, returning an 'invalid' warning. The issue seems to be the user name as the administrator password has worked OK in other situations. Naturally I have checked and re-checked the user name (which was in the form (first name followed by surname in upper and lower case) and it was OK (in any case it was being prompted automatically by the system.)
I have subsequently changed the administrator name (to the form first name only in upper and lower) and the password as suggested by the following article:
http://docs.info.apple.com/article.html?artnum=306876
Nothing has changed. Can anyone help?

HI Martin, a late post to confirm the solution from the last post by using the "RETURN" key works..
(mouse click worked ok in Tiger 10.4.x I thought).
Tis was a delight and so obvious after seeing these symptoms.
I have posted this entry in case anyone else get's into this situation since OSX LEopard 10.5. Several people have encountered this issue where they may have:
• LEopard 10.5.x installed
• have 2 or more active users LOGGED into the OSX system via fast user / fastuser switching
• request a SHUTDOWN or RESTART from an user
• get a OSX request to supply administrator attributed user and it's associated password to validate SHUTDOWN | RESTART request,
• have admin | root account verification failure of password after 'clicking'.
After some months of frustration, it seems a simple PRESS of the "RETURN key" works!
Simply, DON'T mouse click after entering admin user/password.... instead press "RETURN" key.
fwiw.
w

After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Hi everybody,
we recently upgraded our Cloud Control from 12.1.0.3 to 12.1.0.4.
Now we have the following, a little bit strange behaviour.
Everytime we want to log into Cloud Control we have to enter our password more than once.
Sometimes even more than twice.
It alawys says user name and password are required
Does anybody has the same problem?
I didn't found anything on MOS. So any advice or answer is appreciated.
Greetings,
Daniel

Hi Daniel,
We have seen similar issue when we use non-certified browsers for accessing 12c console
Use certified versions of IE with EM 12.1.0.4 Cloud Control. for instance, Microsoft Internet Explorer 10.*, 9.*, 9 and 8 versions only.
This document can help you to understand the Certified Browsers:
<<Doc ID 1912367.1>> EM12c : Supported Browsers and Adobe Flash Players list
Regards,
Rahul

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps...

ICSS_B2C Customer relogin problem "Enter a valid user id and password".

Similar Messages

Maybe you are looking for