ICWC: Is it possible to create a link in a message in the error line

Hi,
after saving a service order in the IC WebClient the success message (including the object id) is shown in the persistent header area of the ICWC - in the error single line. 
Is there a possibility to have a link in this area? I want to create a link onto the object id to directly get into this order again.
Thanks for your help.
Regards,
Ben

Hi,
thanks for your response. Just for the understanding, in my case there are no error messages displayed in the error line. The only visible message is the success note "service ticket XYZ is saved successfully". After saving the ticket correctly we have to navigate to a different view. Changing this is not possible.
So the new client requirement is to create a link at the "XYZ" (object id) in this error (success) message. But I think there is no possiblity to get a navigational link or a usual html-link at that place.
Maybe you got some more ideas?
Thanks and best regards,
Ben

Similar Messages

  • Is it possible to create a link on the content of a text annotation??

    Is it possible to create a link on the content of a annotation??? Like the content of an annotation is some notes as well as a link...
    content -
    this is my first annotation(notes)
    http://www.google.co.in/(link)
    is it possible to create a link for the url given in the content of an annotation??? On click on the url...it should get opened...
    please reply its really urgent....

    How/where do you want to accomplish it?
    Within the document? Using Acrobat? Using another application?
    Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
    You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
    Hope this can help.
    Max Wyss.

  • Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

    Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

    Yes, but it WON'T play through the browser. It'll require any visitor who clicks it to have iTunes installed, and it'll open iTunes as soon as they do.

  • Is it possible to create a link to the bibliographies ?

    is it possible to create a link to the bibliographies ?

    How/where do you want to accomplish it?
    Within the document? Using Acrobat? Using another application?
    Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
    You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
    Hope this can help.
    Max Wyss.

  • Photoshop Elements 13 - Is it possible to create a link in an image?

    Photoshop Elements 13 - Is it possible to create a link in an image?

    No, you would need to use your web design program to do that.

  • In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

    In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

    As it's a feature asked several times, maybe it will be available in the next version.
    I don't know features available in Excel.
    Sometimes ago I posted an AppleScript which may perhaps fit your needs.
    If you insert in a table pathnames of files stored in your HD, select the cell, trigger the script, open the file.
    Here is an updated version :
    --[SCRIPT open_a_file]
    Enregistrer le script en tant que Script : open_a_file.scpt
    déplacer le fichier ainsi créé dans le dossier
    <VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Library:Scripts:Applications:Numb ers:
    Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
    Sélectionner la cellule contenant le chemin d'accès
    Aller au menu Scripts , choisir Numbers puis choisir  “open_a_file”
    ouvre le fichier.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    --=====
    Save the script as a Script: open_a_file.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
    Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
    Select the cell containing the pathname
    Go to the Scripts Menu, choose Numbers, then choose “open_a_file”
    open the file
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    Save this script as a … Script in the "Folder Actions Scripts" folder
    <startupVolume>:Library:Scripts:Folder Action Scripts:
    --=====
    Yvan KOENIG (VALLAURIS, France)
    2010/02/02
    2011/04/28 - replaced the getSelParams handler by the get_SelParams one
    --=====
    on run
              set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
              tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                        set maybe to value of cell rowNum1 of column colNum1
              end tell -- Numbers
              tell application "Finder" to open maybe
    end run
    --=====
    set { dName, sName, tName,  rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
    on get_SelParams()
              local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
              tell application "Numbers" to tell document 1
                        set d_Name to its name
                        set s_Name to ""
                        repeat with i from 1 to the count of sheets
                                  tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                                  if maybe is not 0 then
                                            set s_Name to name of sheet i
                                            exit repeat
                                  end if -- maybe is not 0
                        end repeat
                        if s_Name is "" then
                                  if my parleAnglais() then
                                            error "No sheet has a selected table embedding at least one selected cell !"
                                  else
                                            error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                                  end if
                        end if
                        tell sheet s_Name to tell (first table where selection range is not missing value)
                                  tell selection range
                                            set {top_left, bottom_right} to {name of first cell, name of last cell}
                                  end tell
                                  set t_Name to its name
                                  tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                                  if top_left is bottom_right then
                                            set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                                  else
                                            tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                                  end if
                        end tell -- sheet…
                        return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
              end tell -- Numbers
    end get_SelParams
    --=====
    on decoupe(t, d)
              local l
              set AppleScript's text item delimiters to d
              set l to text items of t
              set AppleScript's text item delimiters to ""
              return l
    end decoupe
    --=====
    on parleAnglais()
              local z
              try
                        tell application "Numbers" to set z to localized string "Cancel"
              on error
                        set z to "Cancel"
              end try
              return (z is not "Annuler")
    end parleAnglais
    --=====
    --[/SCRIPT]
    Oops, I forgot that you are asking about Numbers '08 which hasn't AppleScript support.
    Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 16:26:39
    Please :
    Search for questions similar to your own before submitting them to the community

  • Is it possible to create a DVD in iDVD without using the themes they provide?

    Is it possible to create a DVD in iDVD without using the themes they provide?

    Hi
    No Menu DVD
    from. Mishmunken
    How to create a DVD in iDVD6 without menu (there are several options)
    1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
    Disadvantage. The DVD plays until you hit stop on the remote
    2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
    Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
    3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
    Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
    4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
    Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
    5. The "hard way". Post-production with myDVDedit (free-ware)
    Tools necessary. myDVDedit ( www.mydvdedit.com )
    • create a disc image of your iDVD project, then double-click to mount it.
    • Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
    • Set permissions to "read & write" and include all enclosed items; Ignore the warning.
    • Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
    • Select the menu (usually named VTS Menu) and delete it
    • Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
    • Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
    //lonestar.utsa.edu/llee/applescript/dvdimager.html
    hope this helps!
    From LynnLU USA
    www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
    Yours Bengt W

  • My client needs to be able to create a link to a document on the server in Incontext editor

    My client needs to be able to create a link to a document on the server, but I dont want to allow FTP/File manager access as this gives him opportunity to delete pages and files.
    How can you give him safe access without giving access to the files?

    The only other way to upload the document to his site is to use Media Downloads, also known as Literature in some part of the system. Then, inside the InContext Editor you click on the link and and select page from my site, then link to the literature item created.
    That's all.
    Cheers,
    -mario

  • Is it possible to send sms to groups from Messages in the new iOS8?

    Is it possible to send sms to groups from Messages in the new iOS8?

    Of course.  This feature has been part of iOS for a while now.
    http://lmgtfy.com/?q=send+group+sms+from+iPhone

  • Is it possible to create view link on programatic VOs

    I tried creating a view link between 2 programatic VOs but did not get a clean way to get the where clause.
    It appears that the where clause has to be dependent on the EOs which does not exist in this case.
    On creating the view link,i need the following where clause:
    VO1.col1 = VO2.col1 ( i.e. :Bind_col1 = VO2.col2)
    Is this possible ? The query getting built here is showing up as null bind variable i.e. :Bind_col1 is null
    Please suggest how to get over this issue.

    How/where do you want to accomplish it?
    Within the document? Using Acrobat? Using another application?
    Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
    You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
    Hope this can help.
    Max Wyss.

  • Is it possible to create a book in size other than the presets? [was:Books]

    Is it possible to cerate a book in size other than the presets? If so, where do I go to enter my own dimensions?

    Create your design on one or more  master slides:    View > Edit Master Slide
    delete unwanted master
    then save as a Theme:    File > Save Theme
    Save as;  is achieved by pressing the option key then File > Save as...

  • How to create a link to a document in the KM content

    I work in BI.  I have a document in the KM Content folder and I want to create a link to this document from another folder that I created in Portal Content.  Can someone tell me I can do this?
    Thanks.
    Ryan

    There seems to be some confusion between Portal and KM features here.
    The problem is that I have no idea of BI. But as I understand it correctly, BI stores some objects like Web Reports in KM folders.
    To your point 1.: ZSANDYTEST looks like a customer development. This is not a standard navigation node. Also you speak of "folder". The navigation nodes "Content Administration" and "Portal Content" have nothing to do with KM at all. The are comming from a portal role. So the question is, what is ZSANDYTEST below the Portal Conten navigation node? Is it an iView? What kind of iView is it?
    You say you want to have a "link" in this "folder" but without getting more details about what kind of object "ZSANDYTEST" is I can only guess, what you are having there.
    I suggest to first get a basic understanding on portal content and portal roles starting about here
    http://help.sap.com/saphelp_nw70/helpdata/en/6b/a7a62102194ad0879b19731905d2de/frameset.htm
    No if you now what a role is and what an iView is, we can talk about how to integrate something into an already existing role. You can create an iView of a fitting type to integrate any content into the portal.
    For example create an SAP transaction iView if you want to integrate an SAP transaction.
    Now KM is an application using the portal. Things stored in KM can be intergrated in different ways.
    If you want to integrate a word document stored in KM it is a good idea to create a KM document iView. If you want to intergrate a whole KM folder structure you need to use a KM navigation iView. In the standard portal roles there are already KM navigation iViews, so to integrate a new object like a word document you can simply create a new KM folder and upload the document there.
    So try to specify if you mean a KM folder or a portal navigation node or a PCD folder. Because whithout seeing the system while talking about this there will be confusion.
    2. When creating a link in KM you will get a popup with KM entry points in it for which you have permissions. There is also a small link called "more" if not all entry points are fitting into the window.
    Form the link to this SRA_LOGO_TEST you posted before this seems to be stored in a subfolder of the "Public Documents" entry point (folder) so navigate into the Public Documents entry point and into the subfolder containing the object you want to link to. Of course, if you do not have read permission to the folders or objects you want to link to, you will not see them.

  • Is it possible to create Qt Widgets inside After Effects using the SDK?

    Hi,
    I would like to use Qt to create Dialogs and Widgets inside AfterEffects.
    I started out with the Panelator example in the SDK. I can include QtGui into the project, but as soon as I create any object with QObject as a base-class After Effects crashes immediately with the following error: '[...] could not be loaded (48::46)'
    When I try delay load QtCore.dll and QtGui.dll I can at least start the plugin and see, that the crash happens in the initializer of the QObject.
    I use
    VS 2010
    QT 4.8.5
    and my buildenvironment is x64
    I was wondering if there is any kind of incompatibility of embedding Qt in After Effects (due to linker/compiler setting or defines or something like this).
    This is the debugger output:
    Locals:
    Threads:
    My code in the Panel-constructor function:
        int argc = 0;
        char *argv[1] = {""};
        QApplication* a = new QApplication(argc, argv); // THE ERROR OCCURS IN THIS LINE. for a test I exchanged it to QWidget* w = new QWidget(); and it happens as well.
        QWidget* w = new QWidget();
        w->show();
        a->exec();
    Outside of AfterFX Qt works fine and I also can delay-load QtGui and QtCore.
    If anyone of you already has experience in using QT in AfterEffects, I would really appreciate your help!
    Thanks in advance.

    It finds QtGui and QtCore, it misses out some other dependencies further down in the hierarchy of USER32.DLL:
    Which doesn't seem to disturb if I don't include and use QT:

  • Creating a QueueReceiver after sending message to the QueueSender

              Hi,
              I'm implementing a blocking system, sending messages to a JMS Queue.
              In a servlet, in the init method, I'm creating the QueueSender object.
              When calling the servlet, in the service method, if I need to create a new
              message to let users know
              that one primary key is blocked, I create a message with a:
                   msg.setStringProperty("MyTablePrimaryKey", "PKValue");
              Then, I send it.
              If other clients want to update that record, he creates in the servlet's service
              a QueueBrowser like this:
              QueueBrowser receptor=qsession.createBrowser (myQueue, strFilter);
              where strFilter is "MyPrimaryKey IS NOT NULL".
              If the enumeration my QueueBrowser returns hasMoreElements(), the record is
              blocked.
              To unblock a record, I fetch the message from QueueBrowser with the with Enumeration.nextElement,
              and I set:
              message.setJMSExpiration(1);
              so the message is automatically deleted from the queue.
              I tried to use QueueReceiver to implement it, but as I don't know the filter's
              name in the init method of my servlet,
              it's not possible to read messages if the QueueReceiver is created after having
              sent those messages.
              Is my implementation correct? Is the behaviour of QueueReceiver logical?
              Of course, I'm thinking of doing all these things in EJBs to use transactions
              with JTA and JMS. Can be any problem
              with it?
              Sorry for the long question, but I've started discovering JMS a few hours
              ago, and it looks so interesting... :-)
              Best Regards,
              Ignacio
              

              Ignacio Sanchez wrote:
              > Tom Barnes <[email protected]> wrote:
              >
              >>
              >>Ignacio Sanchez wrote:
              >>
              >>>Hi,
              >>>
              >>> I'm implementing a blocking system, sending messages to a JMS Queue.
              >>>
              >>> In a servlet, in the init method, I'm creating the QueueSender
              >>
              >>object.
              >>
              >>> When calling the servlet, in the service method, if I need to create
              >>
              >>a new
              >>
              >>>message to let users know
              >>>that one primary key is blocked, I create a message with a:
              >>>     msg.setStringProperty("MyTablePrimaryKey", "PKValue");
              >>> Then, I send it.
              >>>
              >>> If other clients want to update that record, he creates in the
              >>
              >>servlet's service
              >>
              >>>a QueueBrowser like this:
              >>> QueueBrowser receptor=qsession.createBrowser (myQueue, strFilter);
              >>> where strFilter is "MyPrimaryKey IS NOT NULL".
              >>> If the enumeration my QueueBrowser returns hasMoreElements(), the
              >>
              >>record is
              >>
              >>>blocked.
              >>
              >>
              >>How? The QueueBrowser supplies a snap-shot of the queue, it doesn't
              >>prevent other receivers and queue-browsers from seeing the message.
              >>
              >
              >
              > That's exactly what I want. I want concurrent queue-browsers to see the same message.
              >
              >
              >>>
              >>> To unblock a record, I fetch the message from QueueBrowser with
              >>
              >>the with Enumeration.nextElement,
              >>
              >>>and I set:
              >>
              >>> message.setJMSExpiration(1);
              >>> so the message is automatically deleted from the queue.
              >>
              >>
              >>This will have no effect. Expiration can only be set when the message
              >>is sent, and only via the producer API not the message API. The message
              >>API setter is not intended for application use (see the
              >>javax.jms.Message javadoc). To delete the message you can
              >>create a QueueReceiver with a selector based on the message's
              >>message-id, then receive and acknowledge the message.
              >>
              >
              >
              > But it works!! I've tested once and again and it works fine for me. Shouldn't
              > it???
              >
              Gah!! This behavior is not supported. Do not depend on it to
              be there in future releases or SPs. Any changes to an already
              sent message by a client should propagate to the copy that
              is on the server.
              In fact, I think this may have already been fixed. Can you
              tell me which release and SP you are using?
              >>>
              >>> I tried to use QueueReceiver to implement it, but as I don't know
              >>
              >>the filter's
              >>
              >>>name in the init method of my servlet,
              >>> it's not possible to read messages if the QueueReceiver is created
              >>
              >>after having
              >>
              >>>sent those messages.
              >>
              >>I don't understand. If you can create the QueueBrowser when you
              >>need it, why can't you just create a QueueReceiver with a new selector?
              >
              > If I create a new QueueReceiver after having sent the message using a QueueSender,
              > the
              > receiver cannot read the messages already posted, even in selector is OK. But
              > it works with
              > a QueueBrowser ¿¿??¿¿
              If a QueueBrowser can see the message so should a QueueReceiver. They
              both use the same filter/selector mechanism. It is surprising
              that one worked and the other didn't. Or are you referring to
              the normal behavior that only one QueueReceiver can "see" the message
              at a time? And that once a QueueReceiver has a message the
              QueueBrowser will not "see" it?
              > That's why I'm using QueueBrowser and not QueueReceiver.
              >
              >
              >>>
              >>> Is my implementation correct? Is the behaviour of QueueReceiver
              >>
              >>logical?
              >>
              >>>
              >>> Of course, I'm thinking of doing all these things in EJBs to use
              >>
              >>transactions
              >>
              >>>with JTA and JMS. Can be any problem
              >>> with it?
              >>>
              >>> Sorry for the long question, but I've started discovering JMS a
              >>
              >>few hours
              >>
              >>>ago, and it looks so interesting... :-)
              >>>
              >>> Best Regards,
              >>> Ignacio
              >>
              >
              

  • Possible to create a link in PDF?

    I am new the Acrobat SDK.  I have been asked to develop a tool that searches for a specific string in a PDF document and then creates a UNC link from it to a shared document on the network.
    This is currently done manually using the Adobe Acrobat product.  However we'd like to automate this process as it needs to be repeated for severl documents.  Reading the SDK docs, it was not immediately clear to me if it supports editing the document by creating links.
    Does anybody know if this is possible and can you point me towards any documentation on this topic?
    Thanks.

    HI Bernd,
    The video above does not show me how to link to a video have it start playing.
    I know it is also possible in indesign to have a button link to a specific point in a video, but I haven't been able to find out how to do that from a text link.
    so for example. the text could say "watch our video, or click here to learn about subject two".
    where - "learn about subject two" takes the user to a specific part of the video, and makes it start to play.

Maybe you are looking for