ICX profile settings for Discoverer EUL

Hi, I'm using Discoverer 4i Viewer with E_Business and I create a new EUL.
How can I switch from the old EUL to the new one in order to see my reports ?
I found this note on the Discoverer Forum:
"Looks like you are using Oracle E-Business. If you launch
discoverer viewer from E_Business then your ICX profile settings determine
which EUL you be connecting to.
The ICX profile settings is in your E-Business profile settings."
Where can I find and modify my ICX profile settings ?
Thanks in advance
Alex

Thanks for your help guys, but unfortunately it doesn't still work....
My previous EUL was called just "EUL". Now I created a new one called "EULEXP" and I modified the parameter ICX_DEFAULT_EUL with the value "EULEXP", but when I try to access my reports from Discoverer Viewer, automatically into the URL call appear again eul=EUL and not eul=EULEXP as shown below:
http://gnvdev.ote.gr:8025/discoverer4i/viewer?ac=ORACLE~3a~22OTE~20HELPDESK~22~40crmdb&eul=EUL&nlsl=en-us&wbk=STATISTIC_REPORT_2_OK1
If I try manually to set eul=EULEXP I have this error
Authentication Failed.
(Default or specified schema containing EUL tables is inaccessible )
Where do I make the mistake ?
Thanks
Alex

Similar Messages

ERD for Discoverer EUL tables

Does anyone know if Oracle supplies an ERD for the Discoverer EUL tables. I would like to have such a thing to generate reports about system use etc.

Hi Russ
How are you doing?
I'm afraid Oracle considers that to be proprietary information and is concerned over folks being able to reverse engineer the product hence they won't give away the inner workings of the EUL.
However, they did allow me to publish some of the workings in my Discoverer 10g Handbook which are printed in Appendix A.
In reality, if folks get hold of and install the EUL5 end user layer that is supplied on the Discoverer Admin CD it is not too hard to decipher most of what is going on.
Best wishes
Michael

Need suggestion on Color Profile settings for printing image

I am trying to print the image below on a Xerox Docucolor 242. Im trying to get a better understanding of profiles and all that, which I THINK I do now.
Under Color Settings in Indesign, I have under Working Spaces, RGB is set to my monitor brand and type and CMYK is set to my exact printer. I have both of the Color Management Policies set to Off.
When I print the RGB version of this image, everything looks ok except for a very faded look. Probably noticed mostly because of all the black background that is used. When I print the CMYK version of it, it seems to print nice and dark but there is a strong white halo effect showing around both the flames which doesnt show on the screen or the RGB printout.
Anyone know what settings are causing the faded look in the RGB printout and the halo effects in the CMYK printout?

As others have said, this is a complex process, but one that is solvable.
I agree with others the RGB profile should NOT be the monitor but the profile of the original image. For most midrange cameras this will be sRGB or Adobe RGB depending on the settings in the Camera when the images was captured. It is NOT arbitary and choosing the wrong profile will have a large affect on the image.
The CMYK profile for the printer is more complex. There are two steps in calibrating and profiling a Xerox printer. First the calibration, or linearisation, sets the printer to a known state that can be repeated. This is best done with a spectrophotometer and not the CalorCal software provided by Xerox which uses a known colour chart scanned from the glass of the copier. The glass method of calibration does not calibrate correctly at the black end of the curve actually turns over reducing the available black, and is due to reflections from the glass. Calibration is normally done daily.
When the calibration has been completed a full ICC profile is created by printing a profile chart of some 2000 colours and reading this with the spectrophotometer. This is only valid for a calibrated printer and for the type of paper used. Different papers will require different profiles. It is a once only operation.
Another thing to watch out for is how your RGB images are being converted to CMYK. There is a setting both in the Creative suite and in the printer to set the black compensation. What you want to achieve is the same black as in the original image. In the CMYK case this will be printed as a combination of black toner pus a mixture of CMY to incread the density. The profile takes care of this for you.
Your description of weak blacks suggests that the black me be being printed as pure black toner.
Ian
NZ ColourManagement.

DIP profile settings for quotaion creation?

Hi experts
I have to create quotation with reference to Plan cost thru ECP.For the same i have to assign DIP profile. So, i need to know what are the settings should be done in DIP profile steps (like in Usage , charaterstics,Sorces, selection criteria etc..) so that i can use it for quotion creation.
your early replies may help me a lot.
Thanks in advance

i am closing this thread

Default Profile Settings for Work Order Confirmations (IW42) Screen

For the IW42 Screen, I have a requirement to ensure that all users see one profile only. Currently, we have to set it manually for each user. Is there a way to mass update many users so that they can see the one specific screen that can be set in the background?

Delete all other Profiles from the IMG
Then they can only select one...
Otherwise, write a program to update table TPMUS-PROFIL
PeteA

Color Profile settings for a better print?

I need to print a CD label (using one of those cheap CD label templates) that consists of a photo and some text that will be placed on a CD. I will be using an HP laserjet printer http://www.amazon.com/HP-LaserJet-CP1525nw-Printer-CE875A/dp/B0044XSNHG My file is set to RGB, though it is printing much darker than I want it to.
1. Which color profile should I be using to make the colors on my label look better?
2. Any other tips, besides getting a better printer?
Thanks.

Typically, best inkjet prints occur when the image profile and the specific printer profile are used in conjunction with a brand-specific paper stock. The CD-label is a third-party paper, and the printer doesn't "know" how to best address it. Aside from calibrating your monitor to ensure that you are seeing something "close" to what the file is, you will probably find that you need to make color adjustments to the file in order to get the print color you want on a third-party paper stock. When confronted with this situation, I usually use a curves or levels layer for this, and label that layer "for printing."

List of Custom profile settings for mobile internet

Hi, My boss travels frequently overseas and the mobile internet feature on DM6 is very useful.
i was wondering if there is a list available for all countries's service providers so that we can add the custom profile to the existing list on DM6
Thank you.

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Creation profile settings for Scheduling Agreement

Hi Experts,
I have a question regarding parameters of Creation profile maintained in Scheduling Agreement.
In ‘General Parameters’, the Forecast delivery schedules there exists a parameter ‘FRC:Aggregation’.
I would like to know about the significance of using option ‘3’ as ‘FRC:Aggregation’ parameter in creation profile.
Please provide some details regarding usage of above said Aggregation parameter in Creation profile.
Thank you.
Best Regards,
Ashok

If you work with release creation periodicity and planning calendar (lets say delivery schedule every Friday) there might be schedule lines in between and these were aggregated to this fixed day.
Best regards,
Hans

Partner Profile settings for IDOCs

Hi,
when i posted the IDOC, it left the status 51.
i think which means "Application not posted".
do i need to change the partner profile!
if yes please let me know how to change that.
its very urgent please.
thanks in advance.
Regards,
ravi.

As mentioned in the earlier reply you need to check idoc listing WE02.
You may also want to look into the partner profile- WE20 and see if what you are trying to pass thru has been set up correctly. Make sure the correct port is defined along with the partner details.
If you need to edit the IDoc , you can do it from WE02 by clicking on the segment and then going into the Change mode. The other option of re- processing Idocs is using the testing tool- WE19 or the re-process Idocs BD87 transactions.

Inherit user profile settings

Hi
I need some help to save couple of time managing profile settings for every user in our Agency. We use 10.6 Server, 10.6 on the clients and the Adobe Design Standard CS5. To use Adobes CS5 in a good way, many settings need to be stored in the users profile (like GREPs, printer joboptions, color profiles, etc.). Seperate from the huge time amount to configure every user on its own, it is more than possible to forget some important preferences. Is there any way to inherit from a adobe well formed user profile?
Thanks for your suggestions and btw. ... sorry for my bad english

this is not a SAPGUI question.
try the Security forum at Security

User is getting expired frequently profile settings are in message section

profile settings for that user
10.2.0.4 database
failed_login_attempts=8
password_life_time=unlimited
password_reuse_time=unlimited
password_reuse_max=unlimited
password_lock_time=default
password_grace_time=default
Edited by: user11278505 on Oct 7, 2011 2:19 PM

user11278505 wrote:
profile settings for that user
failed_login_attempts=8
password_life_time=unlimited
password_reuse_time=unlimited
password_reuse_max=unlimited
password_lock_time=default
password_grace_time=defaultAUDIT CREATE SESSION might provide additional clues

Over the Air update - Server Profile Settings

Hi,
I updated my N80 to V4 firmware with the over the air update services.
Does anybody have the Server Profile Settings for this?

Hi there....
you can actually get the server profile to enable your phone to perform Over the Air Software Update by calling your Network Operator/Service Provider.
Till Here...
Message Edited by Maximnexus on 06-Nov-2009 02:56 AM
"If you think this post is helpful, please click on the green button"

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Is it possible to change proxy settings for all profiles that´s created instead of the standard options. We need to change "use systems proxy" into "automatic"

Proxy Problems
We need to be able to change the default settings for the proxy for all profiles on our computers that´s created for new users.
Standard is that firefox takes the option "use the system options" for the proxy. We would like it to use the option "automatic" instead like IE and Chrome does.
Considering that we have over 500 computers doing this manually isn´t an option, because a new profile is created everytime someone logs on to a computer they haven´t used before.

You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new default values.
Place a file local-settings.js in the defaultspref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
*http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
This will work for all existing and newly created profiles.

Profile Manager Settings for Group does not display for individual members of the group

Hi there,
Can anyone confirm whether I am going mad or not, I and new to Mac Server and have set up Profile Manager on OSX Mavericks from scratch and have been using it successfully to deploy enterprise iPads. I have just gone to edit the profile as we wish to increase the timeout time to locking and have been greeted with something strange.
We have all users in a Group which has settings applied for timeout, pass code change etc. however if I go to an individual account who is part of that group then it isn't showing any settings for that user and it would appear I need to set them again. Similarly if I go to a device belonging to a member of the group then its not showing any settings for that device.
I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same however it appears that you can have a separate payload for a group. Is this the case?
I am grateful for any advice people can give me.
Thanks again.
Rob

I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same
That was never the way it worked in older versions of 10.3, 10.4, 10.5, 10.6 Server.
The restrictions for a Group were shown for a Group. The restrictions for a User (alone) were shown for that User.
And the advantage is that if you see something wrong for a single user, you might be tempted to fix it there, in that user, and when you had changed six of them, you might remember that you meant that to be a group setting after all.
And the software to implement them separately is simpler, but YOU have to test it to find out the end results of compositing Group and User settings.

ICX profile settings for Discoverer EUL

Similar Messages

Maybe you are looking for