(ID 43 Details: Internal error code: 0x8099090E) and (ID 60 Details: Internal error code: 0x809909B0)

Hi,
I have a problem with one DPM 2012 SP1 installed on Windows 2012 R2 server with SQL installed locally on the server.
We have installed this server for about 1 month ago and almost every job work grate until now.
The May 17 there were a DPM Rollup 6 (KB2958098 – version 4.1.3441.0) that was trying to install but it failed. But it looks like it has installed anyway because in DPM it say 4.1.3441.0.
Now DPM is reporting a lots of critical and warnings.
We backup Windows 2003, Windows 2008 and Windows 2012 servers and cannot us DPM 2012 R2.
I have upgraded agents on protected servers but it didn’t help.
I have restarted DPM server
This error message is in DPM. It does not matter if it is Replica is inconsistent or Replica point creation failed.
DPM failed to communicate with the protection agent on DPM SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
The protection agent on DPM SERVER was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
In Event Viewer-Application on DPM server I see this error.
Log Name: Application
Source: Application Error
Event ID: 1000
Faulting application name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Faulting module name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Exception code: 0xc0000005
Fault offset: 0x000000000025d8ed
Faulting process id: 0x1124
Faulting application start time: 0x01cf74d746ed59eb
Faulting application path: C:\Program Files\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
Report Id: 987b50f5-e0ca-11e3-80c7-00155d64d613
Faulting package full name:
Faulting package-relative application ID:
Firewall on all protected servers and DPM server are disabled. Communication with agent works at should be.
Please let me know if you need any additional information.

It looks like something is causing DPMRA service to crash on your DPM server.
My suggestion for you would be to move to DPM 2012 R2 since it now supports backups of Windows Server 2003 with UR2.
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • HT3702 when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help

    when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!

    when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!

  • I was given a 50$ iBooks gift card,  I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

    I was given a 50$ iBooks gift card,  I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

    shrinkydink54 wrote:
    ... The information I got back from support was not clear ...
    Contact Support again...
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Note:
    iTunes Gift Cards are only Valid in Country of Issue.

  • Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

    Hi,
    Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
    While recording the fileds, system giving a message of Code Block.
    Please let us know about Code Block while uploading the Initial Stock.
    Thanks
    Siddu.

    Check this thread
    [Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
    thanks
    G. Lakshmipathi

  • My labtop keeps showing error codes 0601 and 03f0. What does these codes mean and how do I fix them?

    HP Pavilion, Windows vista

    Usually means the hard drive has failed, replace the hard drive and use the HP recovery discs to install windows.

  • T-code:FB60 and MIRO business place validation Section Code mandatory

    Hi,
    My requirement is to make mandatory in MIRO and FB60  field: BUPLA-business place and field:SECCO-Section Code.
    I have done validation through GGB0 . i am facing problem
    prerequisite: syst-tcode = 'FB60'
    check bseg-bupla   <>   ' ' and  bseg-secco <> ' '
    message 'Enter business place and business section.
    This is working fine when bseg-bupla  and  bseg-secco  is not entered .
    but when user enter value in both fields bseg-bupla  and  bseg-secco .
    in table bseg-bupla and bseg-secco both become blank.
    Is ther any other method to achieve this
    regads,
    K.Shobha.

    Hi
    Have you tried it with customizing tools? I understand that you can achieve it. I think that you want to populate these fields if you have a field status group for this account (check it in FS00). You can create a field status group for this account and do mandatory this fields. If you have doubts, search the help of a FI consultant.
    If you see the help for this field:
    Field status group
        Determines the screen layout for document entry.
        Fields can have the following statuses:
        o   Optional entry - you can enter data in the field
        o   Mandatory entry - you must enter data in the field
        o   Suppressed - the field does not appear on the screen
    You can mantain it with tcode OBC4.
    I hope this helps you.
    Regards
    Eduardo

  • HT201210 what is iphone error -1? and how to resolve this error?

    Im switching sim cards. Whilst restoring the iphone an error message with -1 shows.
    This error message does NOT show in any lists on the apple support pages......
    Please help.
    thx

    This usually indicates a catastrophic hardware failure.  You'll need to bring your phone into Apple.

  • Error in Career and Job= Skills Profile

    I have the following issue:
    In the application of Career and Job=>Skills Profile. When I want add a new qualification, the system display the following message of error:
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.getNextPerspective(FcXssPcd.java:518)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.getNextPerspective(InternalFcXssPcd.java:190)
        at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.getNextPerspective(FcXssPcdInterface.java:168)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.getNextPerspective(InternalFcXssPcdInterface.java:160)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.getNextPerspective(InternalFcXssPcdInterface.java:252)
        ... 69 more
    java.lang.NullPointerException
         at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.getNextPerspective(FcXssPcd.java:518)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.getNextPerspective(InternalFcXssPcd.java:190)
         at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.getNextPerspective(FcXssPcdInterface.java:168)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.getNextPerspective(InternalFcXssPcdInterface.java:160)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.getNextPerspective(InternalFcXssPcdInterface.java:252)
         at com.sap.pcuigp.xssutils.ccpcd.CcXssPcd.getNextPerspective(CcXssPcd.java:246)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcd.getNextPerspective(InternalCcXssPcd.java:172)
         at com.sap.pcuigp.xssutils.ccpcd.CcXssPcdInterface.getNextPerspective(CcXssPcdInterface.java:135)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface.getNextPerspective(InternalCcXssPcdInterface.java:132)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface$External.getNextPerspective(InternalCcXssPcdInterface.java:192)
         at com.sap.xss.essservices.cc.ccesspcd.CcEssPcd.getNextPerspective(CcEssPcd.java:220)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcd.getNextPerspective(InternalCcEssPcd.java:157)
         at com.sap.xss.essservices.cc.ccesspcd.CcEssPcdInterface.getNextPerspective(CcEssPcdInterface.java:135)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface.getNextPerspective(InternalCcEssPcdInterface.java:132)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface$External.getNextPerspective(InternalCcEssPcdInterface.java:210)
         at com.sap.pcuigp.xssutils.ccxss.CcXss.getNextPerspective(CcXss.java:238)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXss.getNextPerspective(InternalCcXss.java:157)
         at com.sap.pcuigp.xssutils.ccxss.CcXssInterface.getNextPerspective(CcXssInterface.java:121)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface.getNextPerspective(InternalCcXssInterface.java:128)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface$External.getNextPerspective(InternalCcXssInterface.java:188)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:479)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:938)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1101)
         at com.sap.xss.hr.skl.detail.VcSklDetail.addChanges(VcSklDetail.java:206)
         at com.sap.xss.hr.skl.detail.wdp.InternalVcSklDetail.addChanges(InternalVcSklDetail.java:236)
         at com.sap.xss.hr.skl.detail.Detail.onActiononAddChanges(Detail.java:220)
         at com.sap.xss.hr.skl.detail.wdp.InternalDetail.wdInvokeEventHandler(InternalDetail.java:235)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1356)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:327)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:869)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    In the log trace of portal nwa.
    com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
    sap.com/tc~wd~dispwda
    I made a trace using the t.code ST01 and the system not show error of authorizations. I checked the t.code SLG1 and the system not show none log.
    Please anyone can help me with suggestions for solve this issue,
    Regards
    Carmen

    I assigned the role SAP_ALL but the issue continue.
    I checked the skills catalog and qualifications and all is Ok.
    I don`t understand the cause of this error.
    Thanks in advance,
    Regards
    Carmen G

  • Difference between Field symbols and work area for Internal tables

    Hi,
    In ECC versions we all know that we need to declare the internal tables without headerline, and for handling the internal tables we need to use exclusive work areas.
    Currently i have an issue that we have been asked to use field symbols instead of work areas...can any one help me how to use the field symbols and also let me know how it will improve the performance of the program..
    Thanks and Regards,
    Kathir

    Hi
    DATA: WA TYPE ITAB.
    LOOP AT ITAB INTO WA.
    IF WA-FIELD = .....
    ENDIF.
    ENDLOOP.[(code]
    FIELD-SYMBOLS <WA> TYPE ANY.
    LOOP AT ITAB ASSIGNING <WA>.
    ENDLOOP.
    Now the problem is you can't know the name of the fields of the table at runtime, so you can't write:
    IF <WA>-FIELD = .....
    ENDIF.
    Anyway you can create a field-symbols strcturated like the table:
    [code]FIELD-SYMBOLS <WA> TYPE ITAB.
    LOOP AT ITAB ASSIGNING <WA>.
      IF <WA>-FIELD = .....
      ENDIF.
    ENDLOOP.
    I don't know which are the differences for the performance between to use a field-symbol and to use a structure as work-area.
    The differnce between the field-symbols and work-area is the field-symbol is assigned directly to the record, so u don't need to do a MODIFY statament to change something:
    LOOP AT ITAB INTO WA.
      WA-FIELD =
      MODIFY ITAB FROM WA.
    ENDLOOP.
    LOOP AT ITAB ASSIGNING <WA>.
      <WA>-FIELD =
    ENDLOOP.
    These two pieces of abap code do the same action, so probably the field-symbol improve the performance because it do an access directly to the record without to use an external structure as workarea.
    Max

  • Processchain errors in Production and how to solve those issues

    Dear All,
    Please share some process chain errors in production and how to solve those errors as well,
    Please send me if any one have the list of errors and how you are solved those..
    I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
    Thanks

    Hi
    Table of Contents
    1.     Time stamp error     2
    2.      PSA error records     4
    3.      SID not found for characteristic     7
    4.      Error calling number range object     8
    5.      Trfc error     10
    6.      ALE REMOTE lock     13
    7.      Delta fails     14
    8.      Deleting setup table     18
    9.      How to run statistical setup for different Application components     19
    10. How to do selective deletion     22
    11. Roll up     24
    11. Compression or collapse     25
    12. How to do Attribute change run     27
    1.Time stamp error
    Resolution procedure
    Go to RSA1&#61664;Source system
    Run program RS_TRANSTRU_ACTIVATE_ALL
    Mention source system and Info source and then execute.
    Now the transfer structure will be automatically activated.
    Then proceed with the reload, it will get success now.
    2. PSA error records
    Go to details tab, we will find its packet no. and its record no.
    Resolution procedure
    Click on PSA icon in monitor and select the error data packet
    Double click on error record and edit it to the correct value,
    select  save.
    Now update from PSA to target by selecting the option Start update immediately.
    3. SID not found for characteristic
    Resolution procedure
    a. Remove the failed request from data target by making its QM status into red.
    b. Load Master data for characteristic using full update.
    c. Then reload the transactional data.
    4. Error calling number range object
    Resolution procedure
    Note down the assigned dimension into the cube for “0VAL_TYPE”
    copy the dimension name
    Go to RSRV transaction
    Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on “Comparison of Number Range of a Dimension and Maximum DIMID”- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
    Then click on correct error. It will correct the error.
    5. Trfc error
    Resolution procedure
    Go to SM58
    Go to edit->Execute LUW.
    Then do refresh in monitor.
    Now it will pick the records and the load will get success.
    Some times we found that some packets will not get updated even if the extraction is showing as complete.
    Do manual update of each packet
    6. ALE REMOTE lock
    Resolution procedure
    This can happen when user or ALEREMOTE is accessing the same table
    a.     Remove failed request from data target by making its QM status into red.
    b.     Check into sm12 and delete the lock, usually the BASIS deletes them
    c.     Reload the package
    7. Delta fails
    Resolution procedure
    R/3->BW
    Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
    go to info package restart the load, then you will get a pop up saying that ‘repeat of last delta’ click on request again.
    Go back to manage and look for the delta type, it will show as Repeat of last delta.
    BW->BW(Data mart)
    Delta load failed from ODS to cube/any data mart.
    Make its technical status as red
    Go to manage and remove the failed request by making its QM status as red.
    It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
    If you click on data mart status it will pop up a window
    Click on delete icon, select YES and then ok.
    Now refresh manage the data mart status will get deleted.
    If you load now the failed delta will get success.

  • Getting error that variable1 and variable2 are type-incompatible

    Hi,
    I am geting error that VAR1 and TLINE1 are type-icompatible.my code is as follows .
    DATA : T_INDEX1(2)     TYPE P,
                  VAR1(1) TYPE C ,
                  TLINE1(70)     TYPE C.
    T_INDEX1 = 0.
      DO VARYING VAR1 FROM TLINE10 NEXT TLINE11.
        IF VAR1 NE SPACE OR T_INDEX1 GE 70.
          EXIT.
        ENDIF.
        T_INDEX1 = SY-INDEX.
      ENDDO.

    Hi
    Check now. you dont need full stop next to 100 coz it's not ended with that.
    IF wa_RESULT_PACKAGE-/BIC/AAA<= 100.
    \no need.
    AND wa_RESULT_PACKAGE-/BIC/BBB >= -500
    OR wa_RESULT_PACKAGE-/BIC/BBB <= 300 then
    RESULT_FIELDS-/BIC/CCC = 12.
    Else.
    RESULT_FIELDS-/BIC/CCC= 24.
    EndIf.
    Check the corrected one.
    IF wa_RESULT_PACKAGE-/BIC/AAA<= 100
    AND wa_RESULT_PACKAGE-/BIC/BBB >= -500
    OR wa_RESULT_PACKAGE-/BIC/BBB <= 300 then
    RESULT_FIELDS-/BIC/CCC = 12.
    Else.
    RESULT_FIELDS-/BIC/CCC= 24.
    EndIf.
    Regards,
    Chama.

  • TPM Error ID 13 and 516 occuring after some time

    Hi all,
    on my TP X301 a TPM error occurs always after some up-time. I get error IDs 13 and 516 in the Windows Error Protokolls. This is leading to an unusuable  Client Security Password Manager. Client Security then tells me that the communication with the TPM-chip is blocked...
    The Windows online Help for these IDs suggest me to replace the TPM hardware. I do not believe it is a hardware problem since fingerprint reader is working fine....?
    Anybody got a suggestion on this?
    I got vista x64 running.
    The error information in German is:
    TPM Error ID 13: "Beim Gerätetreiber für das Trusted Platform Module (TPM) ist ein nicht behebbarer Fehler in der TPM-Hardware aufgetreten, der die Verwendung der TPM-Dienste (z. B. Datenverschlüsselung) verhindert. Wenden Sie sich an den Computerhersteller, um weitere Hilfe zu erhalten."
    TBS Error ID 516: "Fehler bei der Kommunikation mit dem TPM. Vom Treiber wurde 0x8007045d zurückgegeben."
    ThanX a lot in advance.
    St.

    Here is an explanation of the failure:
    1. Prioritized replication was introduced with DS6.0;
    2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
    3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
    A work-around:
    Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
    pwdIsLockoutPrioritized:FALSE
    Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
    1. The default password policy at any DS6 instance (cn=password policy,cn=config);
    2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
    3. Any password policy added to a DS6 instance.
    Additionally, do not set any prioritized replication rules for other attributes.
    It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
    Contact Sun support for the status of a fix for the bug. The CR is 6645742.

  • DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

    Hi everyone,
    Backup jobs for protected members are intermittently failing with the following error on the DPM server:
    DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
    Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
    The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
    A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
    Thank you.
    With regards,
    Rob

    Hello,
    I have read these entire postings and see that my problems match most of the above problems. 
    I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
    We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail.  When they fail the most common, but not only error, is something like "DPM
    failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
    Since later jobs are successful I thought all was well.  All was well until I went to restore from incremental backups.  We worked for two days (day and night work) to restore
    from a corrupted virtual disk on our SQL Server 2008 R2.  I suspect DPM had something to do with the corrupted virtual disk.  All I know is that we never had this problem until installing DPM.  Here is what we encountered when we went to restore
    from the protection points: 
    *  Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB. 
    *  If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed". 
    *  You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work.  Of course time is wasted while waiting
    to see if it worked.
    * Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
    * So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
    *  If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
    minutes of trial and error.  60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
    * And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored. 
    All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
    I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
    Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently.  I have never had one day of consistent and reliable restore points.  I
    am going back to sql management plans for my backups.  I have never, in 10 years had a sql generated backup fail me.  Never.
    gbl

  • Can anyone provide Error code list and causes for OBIEE10g/11g ?

    Hi
    Can anyone provide Error code list and causes for OBIEE10g/11g ?
    Regards
    Srini
    Edited by: Srini on Feb 18, 2012 10:41 AM

    Hi,
    List of Bug Fixes Included In OBIEE 11.1.1.5.0
    Admin Tool
    •7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
    •10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
    •10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
    •10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
    •10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
    •10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
    •10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
    Answers
    •6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
    •7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
    •9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
    •9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
    •9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
    •9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
    •9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
    •9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
    •9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
    •9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
    •9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
    •10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
    •10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
    •10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
    •10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
    •10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
    •10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
    •10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
    •10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
    •10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
    •10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
    •10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
    •10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
    •10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
    •10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
    •10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
    •10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
    •10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
    •10634175 GRAPH ENGINE IS NOT RESPONDING
    •10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
    •11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
    •11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
    •11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
    •11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
    •11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
    •11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
    •12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
    •12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
    CHARTING
    •8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
    DASHBOARDS
    •7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
    •10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
    •10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
    •10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
    •10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
    •10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
    •10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
    •11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
    •11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
    •11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
    •12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
    INSTALL
    •9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
    •9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
    •10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
    •10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
    •10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
    •10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
    •11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
    MIGRATION
    •7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
    REL_NOTES
    •12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
    SCHEDULER
    •10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
    SECURITY
    •8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
    •9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
    •10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
    •10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
    •10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
    •10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
    •11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
    SERVER
    •6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
    •6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
    •8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
    •9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
    •9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
    •9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
    •10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
    •10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
    •10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
    •10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
    •10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
    •11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
    •11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
    UPGRADE
    •9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
    •10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
    •11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
    WEB_ADMIN
    •8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
    •9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
    •9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
    •10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
    •10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
    •10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
    •11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
    •11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
    WEB_GNRL
    •10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
    •10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
    •11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
    •12416695 TOOLTIP EMPTY IN MAPVIEWER
    WEB_INTGRT
    •10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DON’T APPEAR IN DOWNLOADS TO EXCEL
    WEB_MKTG
    •8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
    •9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
    •9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
    •10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
    Thanks,
    RM

  • Why Do I Receive Internal Software Error(s): Terminal Index Out of Bounds. Error code -61350,When Compiling my FPGA VI for an cRIO-9118 using NI 9223 ?

    I am receiving the following error (in a pop-up window) when compiling my VI FPGA code in chassis NI 9118 using NI 9223 module.  This error occur while compiling process (generating intermediate files , stage 7 of 7). how do I resolve this error ?
    thank you
    additional information :
    Original error message: 
    Errors : 
    Internal Software Error(s): Terminal Index Out of Bounds.
    Error code: -61350
    Details : 
    A terminal with this index does not exist on this block diagram node.
    NiFpgaHandleCallbackError.vi<APPEND>
    <b>Complete call chain:</b>
    NiFpgaHandleCallbackError.vi
    niFpgaNodeInformation.lvclass:Get Const Variant.vi
    DfirModGen.lvclass:GetConstant.vi
    niLvFpgaMungerBrainwashIONodeCommon_Dfir.vi
    niLvFpgaMungerBrainwashSingleIOGrowableMethod_DFIR.vi
    nirviEIOMethodImplementation_SpecifyDFIR.vi
    nirviEIOMethodImplementation_SpecifyDFIR.vi.ProxyCaller
    Solved!
    Go to Solution.

    Hi tesa,
    This is a bug which was fixed in LabVIEW 2012 SP1. The CAR number created for this bug is 332811 and as you can see in this link, it is already in the bug fixes list.
    Carmen C.

Maybe you are looking for