ID CS hangs on one particular image when exporting to pdf

I use ID 3.01, and have created a two-page folder, with 10 images. I cannot create a pdf, because ID hangs when downloading one image during the export process. It's an 8-bit CMYK Tiff, one layer only, saved without compression. The only thing that makes this image different, is that it has some InDesign text and graphics on top of it. (I tried to remove all the text and graphics, and I also tried embedding the images before exporting, but it made no difference)
The image opens without any problems in Photoshop, and is editable. I have also tried to do a Save As under a new name, which didn't help. The image originates from my Nikon D70, but so do other images too.
The folder is due to be printed on Thursday, so any help will be greatly appreciated.

As this is a camera original file, are its resolution settings in a normal range? I.e., verify in PhotoShop that it's not trying to put >5000 pixels into either 0.1 inch or 5000 inch (your numbers may vary).
I've had ID behave erratically with such files, which was solved when I changed the resolution settings in PS.

Similar Messages

Missing image when export to pdf & in High Quality Display

Customer sent me this file so I have no history. Latest version of InDesign. There are a few images that when I select the box it does not show it as linked, but there is an image there. These same images/boxes disappear when I select View>High Quality Display & they are also missing when I make a pdf. Many other images are linked and work fine. What's going on with these other images/boxes? Embedded maybe? I don't have experience with embedded images, how do I get them to show when making a pdf?

Is this what your looking for Peter?

Gray rule around clipped images when exporting as PDF?

I've been clipping images in Photoshop CS6 (Macbook Pro retina) and placing them in my InDesign layout but when I export to PDF, a gray rule appears around the clipped images. It is not visable anywhere in the Photoshop files. Thank you for any advise!

Thank you for the reply. I'm placing the image as a photoshop file, with layers. I clipped the background out using clipping paths and/or masks, added drop shadows, fixed the color a bit. Here is a screen shot of the PDF: the shadow is correct but not the hard gray rules.

Crop mark on image when exporting to PDF

When I export my INDD file to PDF, crop marks appear on one of the images (an EPS file) in the converted document. The crop marks do not appear in the INDD file, nor are they part of the original EPS file. Any idea what's happening and how to get rid of it?

Screen shots would help here, but the first thing I would try is replace the EPS file with a native file format, either .al for vector or .psd for raster, or PDF for mixed content.

Blank images when exporting to PDF

I am trying to export a 20+ page spread indesign file to PDF. When doing so, some of the images are showing blank once it has been exported. What is happening?

Well, miraculously it started working, but in case it happens again.. here is more information. I am using CS5. I have made a portfolio of my design work and only some of the files are blank. I used PDF interactive. Some of the images in my portfolio are line drawings and others are charcoal drawings. Only Some of the line drawings are the ones that are just blank when I export it.

Indesign CS4 adds square boxes around images when exporting to PDF

When I export a brochure created in InDesign to PDF, for some reason the .pdf file (only the PDF - the InDesign version doesn't show these) shows faint squares around images/graphics that have shadow effects applied. These appear around photos, as well as graphic objects that have a solid colour background, for example an orange circle. Some suggested rasterizing images in Illustrator and that didn't help. Transparency doesn't seem to be at fault either. Would anyone have any idea what may be causing this and how to remedy the problem?
FYI, the PDF export pre-sets in InDesign are as follows (I only mention options that are checked, the rest are turned off):
COMPATIBILITY: Acrobat 5 (PDF 1.4)
GENERAL:
     HIGH QUALITY PRINT (modified)
     Export Layers:Visible & Printable Layers
COMPRESSION:
     COLOR IMAGES:
     Bicubis Downsampling to 300 pixels per inch for images above 450 pixels per inch
     Compression: Automatic JPEG
     Image Quality: Maximum
GRAYSCALE IMAGES:
     Bicubis Downsampling to 300 pixels per inch for images above 450 pixels per inch
     Compression: Automatic JPEG
     Image Quality: Maximum
MONOCHROME IMAGES:
     Bicubis Downsampling to 1200 pixels per inch for images above 1800 pixels per inch
     Compression: Automatic JPEG
     Compression: CCITT Group 4
FYI - I use Mac OSX 10.5.8 and InDesign 6.0.3.
I have attached the PDF for your review.
With many thanks,
Alex

BTW, don't use OSX's preview to look at PDFs created by InDesign if they take advantage of high end features such as live transparency.
Preview simply isn't up to the task and you should be using Acrobat or Reader.
Bob

Loosing images when exporting to pdf file from Indesign?

I didn't have this problem before, however as I started using the master page presets some of the pages are not saving properly to pdf version. The master sheets doesnt show up on some of the pages but shows up on others.
Does anyone know why that is?

It does not show in preview.
It shows in the indesign file, but not in preview. The stuff that disappears are from the master page, they show on some pages but not on others. Which is very strange.
I have taken more shots.
Master F sheet is applied for this page.
The other page i posted previously started working when I applied a different master sheet over it.

Format Changes when Exporting to PDF

I'm using Crystal 12.0 and have an issue very similar to these threads listed below.
While viewing a report on my development machine, all is fine. I can export to PDF and the formatting is OK.
However, when the report is exported to PDF on the web server, the spacing between some of the text is off. The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field." All that's supposed to happen here is several spaces are used to move the text under the proper column.
When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces. I wondering if the below threads apply to Crystal 12.0.
Thread:1220516 and
Format Changes when Exporting to PDF
Thanks kindly for your assistance,
-Marty

I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
Thanks!
Edited by: WanderingEye on Sep 18, 2009 4:54 PM

Images downsized and converted when exporting to PDF

I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
I found an old thread on another forum where this problem occurred but a solution was not found or posted.
Any ideas?
Michelle

This reply is a series of comments and suggestions rather than a definitive answer.
1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
2. Never copy/paste a graphic or table into PageMaker. Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
(You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows
4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF. Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
6. It's time to leave PM and move on to InDesign - see it as PM Ver 13.
7. Aternatively, use PM7 on a contemporary Win2K PC. http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Set up the Preflight panel so it checks image resolution. Ask your printer what the appropriate resolution is for your printing process, and set that in Preflight.

Display metadata on image when exporting?

I have a client who would like to see a date & time stamp displayed in a corner of all the images when I export them from RAW files. Is this possible in LR 3.4, and if so, can someone please tell me how/where to look? I've been all over it, can't find it.
Thanks
Andy

Jim Wilde wrote:
There's a limited capability in the Print module (i.e. using the Print to Jpeg option), though not sure it will allow both date and time. A much more flexible option, which would allow you to do exactly what you want, is the export plug-in LR/Mogrify2.
Don't think LR/Mogrify 2 works in LR5.6. I can't get it to put anything on the image when exporting.

InCopy hangs when exporting to pdf

Hi there,
We have a few files that are having this issue in that when the InCopy user tries to export to pdf, the program hangs. The InDesign user can export a pdf without issue. The files do not have a known font issue and it's happened on small as well as larger documents. This doesn't happen with all of our files - just a handful... which some are pretty simple so not sure why it's happening...
Any ideas?

Dear Jeff,
Please go through the settings:
When using the new Function of 'Exporting to PDF'/'PDF Generation' the following two settings need to be applied/checked:
1. Path needs to be defined via 'Administration->System
Initialisation->General Settings->Path->Attachment Folder
2. The Windows User needs to have write/modify permission for the folder defined under 1.
(To check if the permission is correct, access the folder and check if a new file could be saved)
In case this does not work please do let us know, does this happen also when you export to word.
Moreover, is this user or machine specific?
Regards,
Gagan Thareja

When exporting from .pdf to powerpoint, misinterprets image as table some of the time. Anyway to adjust setting for finer resolution?

When exporting from .pdf to powerpoint, misinterprets image as table some of the time. Anyway to adjust setting for finer resolution?

Hi Jim,
Could you please let me know what version of Acrobat and OS are you using.
Have you tried repairing Acrobat?
Hope to hear from you.
Regards,
Anubha

Set the compression quality for individual images for exporting a PDF?

When are export a PDF in ID, you are given an option to downsample and compress images. My problem is, I want to compress some images more than others. For example, a photo in the document could be downsampled much more than a png logo. Of course I could go and pre-downsample each image to the right size in photoshop, but that can get kind of involved. Is there a way I could at least exclude one particular image from the compression process?

Well, I didn't find any way to do this in ID, but I do believe its a useful thing to do. In Fact, by doing some careful image-dependent compression, I was able to reduce the size of my pdf by half and have the result still look better than a standard uniform compression. What I did was:
first place all the images in the ID file, size and position them as they should be
then, looking at the rulers, note the horizontal size, in inches, of each image in the document
begin with the first image, open it in photoshop. If you want this image at 200dpi, for example, multiply the horizontal size (from ID) by 200. Change the image size in photoshop to this number.
save the image in photoshop as a jpg and compress as appropriate for the image type
go back to ID, open up the links window, select the image you just changed, and click the update link button
do this with all your images
when you go to export a pdf, don't do any compression or downsampling on the images.. they're already optimised
So as you can see you have to have some idea of the ideal target DPI and compression of each image in your document, and it may require some experimenting. But if you know that some images can be lowered much more than others, I recommend this method. As I said, in my case I was able to reduce the file size by half without negatively effecting the pdf appearance.

Remove back image while exporting to PDF (InDesign CS4)??

Hi All,
I have two images in my InDesign CS4 file and one image is hiding behind my second image. When I am exporting my InDesign file as Pdf and opening in Acrobat, Acrobat showing bottom image first and then showing my top image.
Is there any way to remove my bottom image which is appearing behind in my top image while exporting to Pdf.
I don't want remove manually because it happening with most of my InDesign file.
Please suggest.
Thanks
Baljeet

I would move bottom image to separate layer and then eventually I would switch it off.
If you don't want to change anything in InDesign you can eliminate the second image in your already generated PDF.
Open your PDF in Acrobat Pro.
Advanced -> Print Production -> PDF Optimizer.
You can leave only "Clean Up" check box marked (eventually Transparency if Acrobat will not allow you to switch it off). All the rest leave unchecked.
This operation will remove hidden image.
Correction: It will not remove the image. It just made the PDF to be displayed much more faster that is why the second image appearance was not noticeable. Sorry for the inconvenience.

ID CS hangs on one particular image when exporting to pdf

Similar Messages

Maybe you are looking for