ID CS2 -- SNAFU colors print way off after PDF prints, color setting changes

I have messed things up on my InDesign pretty good. Working on ID 4.0.5 in CS2, with a corrupt Help file, on OS 10.4.11.
It started on a particular document after printing to PDF, something got tweaked and the colors went almost inverted (gray is pink or purple, green is red). Reading in the posts about RGB, CMYK, and color picker, I feel like that might have something to do with it but I don't know what happened. I did use the color picker (perhaps incorrectly) to match to my friend's PMS picks, but it didn't seem to just be that because it did print fine at one time. I THINK it was after the PDF. But now at least another important document is messed up, although not completely -- one small picture prints perfectly, but the main large image is off -- pink where it should be gray.
Fixes i tried that didn't work:
Went to Adobe Bridge and synched color
"Emulate Adobe InDesign CS2 CMS Off"
Monitor Color
any ideas?

I agree with Mylenium on this one. Check your application color settings and synch them. I briefly visited some tech info on that photo copier. Neither printer is Postscript compatable. Paper profiles are usually chosen in the Print dialog, not in the application. Read the User's Guides to those machines. Submit questions on output to them. Check adobe.com for color management white papers.

Similar Messages

Very slow printing to default Adobe PDF printer

I have a 150 page FrameMaker document (with lots of linked Illustrator CS4 files) that is taking 7 MINUTES to print to the default Adobe PDF printer. In contrast, an old QuickSilver / Interleaf document that is 200 pages long and contains even more graphics embedded as huge TIF files, takes 20 seconds to print to the same default Adobe PDF printer.
I have tried all the suggestions I can find on the web, including Adobe forums, but nothing works. Can anyone suggest why printing from FrameMaker 9 to Adobe PDF is taking such a long time? It would appear to be a FrameMaker problem, since every other application can print to the Adobe PDF printer without any problems, and so can FrameMaker... but only at a snail's pace!
I am using TS2 (FrameMaker 9 and Adobe Acrobat 9 Pro Extended) on a 3.0 GHz Quad Core PC running Windows XP Pro.

My computer
Windows XP Professional
Version2002
Service Pack 3
Intel(R) Pentium(R) 4CPU 3.00GHz
2.99GHz, 3.25GB of RAM
Using Acrobat 8.1 Professional. (Haven't upgraded because I saw too many posts with people having problems.)
Using Adobe Design Premium CS3 (I use AI files, we always have for any vector files and way to many to change over to EPS.)
We have also been changing over from Interleaf. I really like FM except for this problem. Very glad to get out of Interleaf.
We also used InDesign for a while and there are no problems printing to pdf.
ls

Printing Problem to Adobe PDF printer

When I print to my Adobe PDF printer I comes out unreadable, but if I copy the unreadable text and paste into word I can read it.
Unreadable text in Acrobat is in Courier, and readable in Acrobat is in Vernada (that's what is shows in word). Does anyone have any ideas?
Version Acrobat Pro 9.4.5

I talked with Adobe and they showed me an option for fonts (listed below). Uncheck the hightlighted option.
And now it prints correctly.

I want to have a unique reference appear on the footer of each printed version of a pdf printed from my website - is this possible?

I want to have a unique reference appear on the footer of each printed version of a pdf printed from my website - is this possible? If so which version of Adobe do i need?

If you want it to maybe happen some of the time, if people use the right browser and software and system, you can use JavaScript.
If you want it to happen reliably, you need server software to add the stamp before the file is served, integrated into your web site's CGI/ASP/PHP or whatever. Probably not an option with shared hosting.

Lightroom 2.2 Printing Problems...color is way off

I have had issues with printing in Lr but never really cared since I used Zoombrowser to print most of my stuff for "around the house" and everything always looked fine (even if I modified the image in LR and printed from Zoombrowser). The colors coming from printing in Lr were always way off when using my Pixma IP4300.
I just purchased a Epson 3800 and now I would like to start using Lr for printing. I have tried everything I know and the colors are still way off when printed from Lr. I selected the appropriate color profile in LR for the printer and paper type, I turned off ICC color in the printer setup menu and the color is still off. If I save the Lr photo and print from Zoombrowser then it looks perfectly fine (still turning off ICC).
Now that I have a nice printer I'd love to be able to print right from Lr as it would save me alot of time and significantly increase my options.
Thanks in advance for your help.
Joe
Btw...I am using Vista Ultimate 64

I doubt the reason that I didn't get any replies is because people assumed I didn't search. There is no way of knowing who did and didn't search the forums before offering to help someone.
I searched the forums and found no problems similar to mine using the same OS, printer and Lr version.
Here is my problem with some more detail:
I am using Lr 2.2 64bit, Vista Ultimate 64, Epson 3800 Pro (6.5 drivers), Premium Lustre Photo Paper.
Here is what I am doing.
1) When in Lr and ready to print I select the Lr profile as "Pro38 PLPP" which is the 3800 Paper profile that is in the list of available profiles for Lr.
2) I select Relative (perceptual didn't appear to change anything)
3) I click "print" then I am taken to the 3800 selection menu.
4) I click properties next to the selected printer, I leave everything alone except for "mode"...I chaneg it from Auto to Custom and then select No color adjustment. Everything else appears fine...the paper type is correct etc. But when print the photo the reds come out pinkish etc etc. All of the colors are pretty far off.
I reinstalled the 64bit drivers from epson and nothing changed.
Any ideas?

Very important question need immediate answer please very serious, is there any way possible i can get recent text messages from the last 2 days and print them off after they have been deleted from my phone?

is there anyway i can retrieve recent text messages from the last 2 days and have them printed off after they have been deleted from my phone? this is seriously important i need this for an attourney!

click here:
Re: Can I request to get the content of old text messages

Color is way off when printing

Windows XP, LR 2.5. On the screen the document looks fine. When I print it is very blue & green, most of the other colors are gone. I print the same photo to a jpg. It looks fine on the screen and prints fine on the same printer. I send the photo (with adjustments) to Photoshop CS4, the colors are right, print to the same printer and it prints right. Only printing directly from LR is having problems.
Any ideas? Thanks!
Rich

I must just be missing something. I'm in LR in the Print module. Under Print Job I see Color Management, Profile: Managed by Printer. My only options are that and Other - and other wants me to choose a printer profile. I'm printing to a network printer (HP color laser). The only profiles I see are ones where I've installed the printer on my computer, like the Canon inkjet I have. Do I have to install the printer driver on my machine to change it?

Lightroom 2 & 3 Beta color, contrast WAY off on display 2

Lightroom 3 Beta 2 / Windows 7 64bit / Dual calibrated displays
Display 1 connections are HDMI out to digital in, display 2 is digital out to digital in.
PROBLEM
In both the Lightroom 3 Beta 2, and Lightroom 2 v2.6 632038, color, contrast and so on are WAY off on my number 2 monitor. If I drag a Photoshop CS4 window from the left display to the right display I see no difference, looks fine. This is also true with Picasa 3, and iMatch Digital Image Management software and preview images in Picasa photo viewer. The issue seems to be just with Lightroom.
I don't see any settings for adjustment of the Lightroom right hand screen in either version - Help appreciated, IM

If you want to, you could zero out all the settings and then save this as a preset and then automatically that preset to all imported images. Not really sure why you would want to do this though. All your images look pretty flat. The default settings do a fair job of approximating what you see on the back of you camera when you made the shot and give you a good place to start. I tried zeroing things out for a while, and then found out I was bringing every image pretty much back to the defaults, and so stopped doing that.

Presentation timing way off after export to Quicktime

I built a presentation with several embedded Quicktime movies. Want it to play all the way through automatically. Plays beautifully in Keynote, but when I export to Quicktime timing is way off. Individual clips have lots of extra time on the first or last frame. Tried all sizes of export, tried recording and then using recorded timings, but nothing works.
I'm offering free beer to anyone who has the answer.

Did you take into account the transition times. That has thrown me off a number of times. Do you have the Fit Slideshow to music option selected?
Another application that creates, IMO, terrific slideshows is PhotoPresenter. It has 25 or more themes and can save the slideshow, with Fit slideshow to music, to a variety of formats, QT, for iPod, HD, etc. This is one of their many themes.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Why does the printer turn off after a few hours of sitting idle?

After a few hours of no use the printer (HP 7510-e aAll-in-one series) turns itself off. To print I have to turn the printer on.

Pace,
Have you tried a "DFU" mode restore as new, without restoring from a backup?
If my question leaves you lost let me know and I will explain but essentially it returns your phone to it's "Out of the box condition".
This method has worked for me an many others albeit not everyone.

Adobe DNG converter is corrupting NEF files. The color is way off and it's not the camera white balance.

I was using the converter for a few months and it was working fine. Now it will convert the files, but the color is really messed. I know it is not the white balance, because the same files convert fine to TIF files through Nikon's software. I am using this converter for Nikon d610 NEF files. Here's a sample DNG and the same image in TIF. Can anyone help? Thanks!

When you use the DNG Converter to make a DNG from an NEF, the DNG Converter applies the default Camera Raw settings. When I open your DNG it looks fine, but when you open it, it looks off. That is because you've some how set your Camera Raw defaults to have a bunch of customized settings specific to a particular picture, instead of having them all be normal settings. Below you'll see what Photoshop is saying the settings of the DNG-Converted-JPG are, with the non-defaults marked in bold. The main problems are the WB being custom and a bunch of HSL setting changes.
Here is what Photoshop reports that the JPG was created using:
      <rdf:Description rdf:about=""
            xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
         <crs:RawFileName>hug_8290_0215_1.dng</crs:RawFileName>
         <crs:Version>6.0</crs:Version>
         <crs:ProcessVersion>5.7</crs:ProcessVersion>
         <crs:WhiteBalance>Custom</crs:WhiteBalance>
         <crs:Temperature>5732</crs:Temperature>
         <crs:Tint>+26</crs:Tint>
         <crs:Exposure>0.00</crs:Exposure>
         <crs:Shadows>5</crs:Shadows>
         <crs:Brightness>+50</crs:Brightness>
         <crs:Contrast>+25</crs:Contrast>
         <crs:Saturation>-4</crs:Saturation>
         <crs:Sharpness>90</crs:Sharpness>
         <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
         <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
         <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
         <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
         <crs:VignetteAmount>0</crs:VignetteAmount>
         <crs:ShadowTint>0</crs:ShadowTint>
         <crs:RedHue>0</crs:RedHue>
         <crs:RedSaturation>+11</crs:RedSaturation>
         <crs:GreenHue>0</crs:GreenHue>
         <crs:GreenSaturation>0</crs:GreenSaturation>
         <crs:BlueHue>+12</crs:BlueHue>
         <crs:BlueSaturation>+2</crs:BlueSaturation>
         <crs:FillLight>0</crs:FillLight>
         <crs:Vibrance>-6</crs:Vibrance>
         <crs:HighlightRecovery>0</crs:HighlightRecovery>
         <crs:Clarity>0</crs:Clarity>
         <crs:Defringe>0</crs:Defringe>
         <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
         <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
         <crs:HueAdjustmentYellow>+1</crs:HueAdjustmentYellow>
         <crs:HueAdjustmentGreen>+5</crs:HueAdjustmentGreen>
         <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
         <crs:HueAdjustmentBlue>-9</crs:HueAdjustmentBlue>
         <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
         <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
         <crs:SaturationAdjustmentRed>-2</crs:SaturationAdjustmentRed>
         <crs:SaturationAdjustmentOrange>+14</crs:SaturationAdjustmentOrange>
         <crs:SaturationAdjustmentYellow>+25</crs:SaturationAdjustmentYellow>
         <crs:SaturationAdjustmentGreen>+26</crs:SaturationAdjustmentGreen>
         <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
         <crs:SaturationAdjustmentBlue>+32</crs:SaturationAdjustmentBlue>
         <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
         <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
         <crs:LuminanceAdjustmentRed>+40</crs:LuminanceAdjustmentRed>
         <crs:LuminanceAdjustmentOrange>+13</crs:LuminanceAdjustmentOrange>
         <crs:LuminanceAdjustmentYellow>+3</crs:LuminanceAdjustmentYellow>
         <crs:LuminanceAdjustmentGreen>+15</crs:LuminanceAdjustmentGreen>
         <crs:LuminanceAdjustmentAqua>+3</crs:LuminanceAdjustmentAqua>
         <crs:LuminanceAdjustmentBlue>+4</crs:LuminanceAdjustmentBlue>
         <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
         <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
         <crs:SplitToningShadowHue>231</crs:SplitToningShadowHue>
         <crs:SplitToningShadowSaturation>32</crs:SplitToningShadowSaturation>
         <crs:SplitToningHighlightHue>45</crs:SplitToningHighlightHue>
         <crs:SplitToningHighlightSaturation>33</crs:SplitToningHighlightSaturation>
         <crs:SplitToningBalance>+74</crs:SplitToningBalance>
         <crs:ParametricShadows>-39</crs:ParametricShadows>
         <crs:ParametricDarks>-7</crs:ParametricDarks>
         <crs:ParametricLights>-15</crs:ParametricLights>
         <crs:ParametricHighlights>+14</crs:ParametricHighlights>
         <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
         <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
         <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
         <crs:SharpenRadius>+1.0</crs:SharpenRadius>
         <crs:SharpenDetail>25</crs:SharpenDetail>
         <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
         <crs:PostCropVignetteAmount>-24</crs:PostCropVignetteAmount>
         <crs:PostCropVignetteMidpoint>50</crs:PostCropVignetteMidpoint>
         <crs:PostCropVignetteFeather>97</crs:PostCropVignetteFeather>
         <crs:PostCropVignetteRoundness>0</crs:PostCropVignetteRoundness>
         <crs:PostCropVignetteStyle>1</crs:PostCropVignetteStyle>
         <crs:PostCropVignetteHighlightContrast>0</crs:PostCropVignetteHighlightContrast>
         <crs:GrainAmount>0</crs:GrainAmount>
         <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
         <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
         <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
         <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
         <crs:CameraProfileDigest>51B4314CF8312BA027EF3FC60481FB35</crs:CameraProfileDigest>
         <crs:HasSettings>True</crs:HasSettings>
To fix the problem you're gonna need to reset your camera raw defaults:
And then be careful when saving new camera raw defaults with the menu item just above, that your image has the camera raw defaults applied to it, except whatever small change you want to be the new default.

Why are some objects not printing from Illustrator after I print to PDF?

Hi,
I've printed a large Illustrator CS6 document to PDF (using Adobe PDF setting in print dialog box), and it looks just fine when I view the PDF. The problem is that some lines do not print when I try to print the PDF on paper. I've tried adjusting settings and printing to the PDF in different ways, but can't figure it out. Everything looks great on the screen, but some lines are missing once printed to paper. Others have tried printing the PDF as well and are also getting missing lines.
Any suggestions?! Thanks!

I've tried selecting print all layers, and I'm also tiling the pages to a custom page size. I've left all the other settings at default. Everything looks perfect on screen, but parts of the same object do not print. I tried to attach a screen shot but am getting an error. Basically each page has a border around it, and one side of the border is not printing on certain pages.

Why do I get the following message when I try to print something off the internet:printer is off linr" when it is connected and I can print anything that comes like letters etc.

ever since I installed "Fire Fox" I have not been able to print anything off the internet, although I can print item that come such as letters etc.
I keep getting the message that my printer is off line when it is on. I am able to type and print o.k. but not able to print anything that I search on the internet.

Is this a silver AppleTV 1? If so coudl be these are 1080p trailers - it only supports up to 720p.

C6380 Printer Preperation After Every Print Job

After any small time gap between print jobs (i.e., not in between queued print jobs, but then after the last of those), my c6380 will go through a "Please wait. Printer preperation occurring." The print mechanism appears (noisy) to be doing something and then it goes idle.
Is my printer acting correctly?
Thanks,
Keith

This is normal. After the printer has been idle for some time it prepares the printheads to be parked away in the service area so they will not dry out.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Avoiding the 'Save PDF File As' dialog when printing to the adobe PDF printer from a service

Hello, can someone please help.
I have Adobe Acrobat 8 Pro installed.
I have an in house application which (among many other things) effectively monitors a directory and prints the file to the default printer. It works fine when run as an application.
I have set the defaults on the Adobe PDF printer to put the output PDF file into a directory and not to open it so it works silently without prompts.
When I run my application as a service, it brings up the 'Save PDF File As' dialog and I would like to avoid this. My impression is that if I put the right registry key in then it will work.
I do not want to do any scripting if I can avoid it.
Thanks for all constructive help given.

Thank for your help Bill, but changing settings in the distiller did not seem to work. As my application prints directly to the default application without using anything specific to Acrobat, I was hoping there was a simple way forward. A colleague suggested copying registry entries from the account I logged on as to the S-1-5-18 entry, then rebooting. This had no effect as the prompt still comes up.
Aandi, I don't have the Acrobat SDK or any experience of it.
Also I'm not sure where any code/script would sit since the application is stable and so I would rather not change it.
If it amounts to a few lines of javascript sitting outside the application then that would be of interest.

ID CS2 -- SNAFU colors print way off after PDF prints, color setting changes

Similar Messages

Maybe you are looking for