ID CS3 "Error Code 5" Unable to open, file damaged beyond recovery. HELP!

System: Apple Dual 500 Mhz PowerPC G4, 1.75 GB SDRAM, Mac OSX 10.4.11.
I have a 36pg ID CS3 document, which is over 2gb because of embedded images. Workflow: create doc using links; when finished, embed all images then unembed to new folder to consolidate. then simply resave the ID CS3 file using the new links. sadly, having embedded, i was unable to save. so, i closed without saving. Now i am unable to open the file.
no problems before embedding, now get "error code 5, unable to open..."
I am painfully aware (now) that this is a bad workflow, as am i aware of several ways to improve this workflow. I do not need advice on a better workflow, i already know i did a stupid thing. i need help on how to recover the damaged file. quick. please. :)
does anyone have a workaround?

Thanks for the tip, Bob. i spoke with a marketing guy at Markzware who asked me to forward it on, he was kind and helpful.

Similar Messages

Error: sp2-0310 unable to open file c:\desktop\oracle\table.sql

I am not able to open any files that I have downloaded and put into a file path. I keep getting the error sp2-0310 unable to open file. I made sure to save my files in a path with no spaces. What can I do to resolve this error message.
Thanks.

As already said, you need to verify you've really got the correct path. After that, you can also check to see that the file name is really table.sql. If you created the file in a simple text editor, sometimes the editor will append .txt to the file name. But if you have "Hide Extensions" turned on in Windows Explorer, then you wouldn't see the .txt extension. Check the file name and make sure it really is as you think and doesn't have another extension on it.
Finally, how are you trying to use the file in SQL*Plus? If the path and file name are correct, you should be able to do this:
SQL> get c:\desktop\oracle\table
and it should bring up the file into the SQL*Plus buffer. Or, you should be able to use:
SQL> @c:\desktop\oracle\table
to execute the contents of the file.
If you are simply using:
SQL> @table
then you could add the SQLPATH environment variable to point to c:\desktop\oracle and that would allow you to skip entering the path.
Hope this helps,
Karen

Error code -43 - unable to get file path when burning DVD

I just installed Tiger on my son's iMac 500. Borrowed a Lacie DVD r/w and tried to burn the contents of a user folder to a DVD-R. It burned part of it, but failed with the following error:
The operation can not be completed because one or more
required items an not be found. (Error coed -43).
Could not open the dat fork of "<unable to get file path>" (-43).
I was able to burn a CD on the drive, but that was for another user directory that fit on a CD-R. The folder I was trying to burn to the DVD was about 1.1 G.
Thanks,
Alfredo

I just installed Tiger on my son's iMac 500. Borrowed a Lacie DVD r/w and tried to burn the contents of a user folder to a DVD-R. It burned part of it, but failed with the following error:
The operation can not be completed because one or more
required items an not be found. (Error coed -43).
Could not open the dat fork of "<unable to get file path>" (-43).
I was able to burn a CD on the drive, but that was for another user directory that fit on a CD-R. The folder I was trying to burn to the DVD was about 1.1 G.
Thanks,
Alfredo

Load error code 9 - unable to open V7.0 work on V6.1

Work done on Labview version 7.0 was unable to be opened on version
6.1. Please let me know what I need to do.

There is an option in LV 7 to save vi under a previous version. Look
under File - Save With Options - Save for Previous 6.1. This will
save the vi so that it can be opened with LV 6.1.

"Unable to open file" error when running system report in HFM

I've installed and configured EPM System 11.1.1.2 for HFM and I've created sample application COMMA.
Next, I'm trying to run sample Journal or ICP Report (for example, sample report named "Journals"). But system gives me an error like this:
+Unable to open file C:\Hyperion\products\FinancialManagement\Web\HFM\FileTransfer\{C9841217-2F8E-4D67-80EE-C23D2720EF87}.FTR\JOURReport7_821239018.+
Error Reference Number: {1998AD6B-2CAA-4C04-B4BB-83909C175257};User Name: admin@Native Directory
Num: 0x80040237;Type: 1;DTime: 09.06.2009 14:30:53;Svr: TESTESO1;File: HFMActionsExecution.cpp;Line: 2236;Ver: 11.1.1.2.0.2207;ExErr: It is an error to mix objects from different versions of MSXML.;
Num: 0x80040237;Type: 0;DTime: 09.06.2009 14:30:53;Svr: TESTESO1;File: HFMActions.cpp;Line: 72;Ver: 11.1.1.2.0.2207;
Num: 0x80040237;Type: 0;DTime: 09.06.2009 14:30:53;Svr: TESTESO1;File: HFMCESAction.cpp;Line: 28;Ver: 11.1.1.2.0.2207;
Num: 0x80040237;Type: 0;DTime: 09.06.2009 14:30:53;Svr: TESTESO1;File: Actions.cpp;Line: 291;Ver: 11.1.1.2.0.2207;
How can I fix this error?
Thanks in advance!
Edited by: Alex Lasker on 09.06.2009 9:49

For the benefit of anyone who experiences this error in IIS7, the IUSR_xxx user no longer exists. You must grant permissions to "IIS APPPOOL\hfmAppPool" instead (select the local machine as the "Location" if Windows Explorer complains).
Similarly, for the benefit of those who get the error in HFM 11.1.2.1, security must be applied to the Oracle\Middleware\user_projects\product\FinancialManagement\Web folder.

Unable To Open File [/oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl

when I do a level 0 load from my desktop i am getting this error??
Unable To Open File [/oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl
Unexpected Essbase error 1090004.
Please advise

When you do a data load from the client, if the file is not a server file Essbase has to copy it to the server to get it to load. That is why server based file loads are so much quicker especially for large files. I'm guessing the ID does not have permission to that tmp directory. Based on the message it looks like a Unix system. Check with your Unix admin about permissions on that directory

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

ORA-00600: internal error code, arguments: [unable to load XDB library]

hi everybody ;
i have 9.2.0.7 db runs on SLES9 on host A. and i take full rman database backup to make a new database on different host ( host B ) with different file structure. ( sid is the same ) i had already 1 database on host B. after this duplicate now there are 2 database on host B.
i take daily full database rman backup on the new host for my new database and there is no problem. when i try to take extra full export backup i get an error ;
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
*** 2010-08-05 09:46:12.868
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
as i search ; i have to stop the database and listener and set the LD_LIBRARY_PATH variable. how can i make this without make any mistake for the first database runs on Host B.
because 2 database must be up and running on host B. can you explaın these operation step by step ?
thank you ....

craft wrote:
any idea ?
>any idea ?
your database is out off support you should consider to upgrade. ORA-00600 indicate for bug

Load error code 3 unable to load front panel

Hi all,
Wrote a vi in 8.6 and saved it for 8.5 for collaborators. When they run it up pops the error code 3 unable to load front panel. Memory full. see attached picture.
Has anyone any suggestions as to how to fix this?
Regards,
leeser
Attachments:
labview error code 3.png ‏51 KB

Hi guys,
Thanks for the comments,
Attached is the code (zipped). Excuse the bulkiness of the block diagrams. It basically controls a rotation stage and makes an avi at specific times/angles. The motor stage is ActiveX controlled.
As I don't have access to the hardware I am writing semi-blind. However, when I did visit them and had a quick look at the code I could get it to work by quickly including the subvis into a new main vi and obviously compiling it in 8.5. (may be onto something here!)
Different versions of the labVIEW -> doing a group a favour; I have v8.6 they have v8.5, wrote it in v8.6 saved it for v8.5. I don't have v 8.5. I also have v 8.2.1 on a different machine. Saved it for v8.2.1 and it opened no problem in 8.2.1. Will send this version on and see how they get on. More likely to be forward compatible???
I agree that the optimal situation is 1) use the same version of labview and/or
2) they get someone to do their coding on-site!!!!
I think the corrupt front panel object could be true given that I could get it to work when the subvis were included in a new main vi on-site.
so versions 8.6, 8.5 and 8.2 attached.....
regards,
Leeser
Attachments:
rotation_control.zip ‏178 KB
rotation_control_v8.6.zip ‏60 KB
NCLA_rot_usb_v8.5 Folder.zip ‏141 KB

Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)

We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
         Database: SG3-DB.edb
        File Type: Database
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
     DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
         cbDbPage: 8192
           dbtime: 3942751903 (0xeb019e9f)
            State: Clean Shutdown
     Log Required: 0-0 (0x0-0x0)
    Log Committed: 0-0 (0x0-0x0)
   Streaming File: No
         Shadowed: Yes
       Last Objid: 877765
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.

We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
         Database: SG3-DB.edb
        File Type: Database
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
     DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
         cbDbPage: 8192
           dbtime: 3942751903 (0xeb019e9f)
            State: Clean Shutdown
     Log Required: 0-0 (0x0-0x0)
    Log Committed: 0-0 (0x0-0x0)
   Streaming File: No
         Shadowed: Yes
       Last Objid: 877765
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.

Error 'Unable to open file' when downloading SAP Query to Excel

Hi all
I'm running a SAP Query which is set to download straight to a spreadsheet (Pivot Table / Microsoft Excel). Intermittently it does not work - apparently at random (at least, I've can't recreate the error at will).
It does one of the following:
- Works ok, and creates the pivot table
- Gives an Excel error message 'Unable to open file', then returns to the 'save the data in a spreadsheet' popup when enter is pressed on the error.
- Does not issue error message, just goes to the 'save the data in a spreadsheet' popup.
In the last two cases, the excel pivot table sheet is not created.
Has anyone seen anything similar, or have any idea as to what is causing the problem?
Any help gratefully received!
Not urgent as I've found a way round - further testing seems to show that I don't get the error is Excel is already open - but in the past I've run many SAP query downloads without needing to open Excel first. I suppose it's possible that this is just something to do with the Excel setup at the user site
Message was edited by:
E Gregory

Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B

N79 (Error message :Unable to open .File type not ...

Dear nokia service manager,,
Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
pls reply me..its very urgent...thanku..

You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

URGENT - Error "Unable to open file because it isn't a valid Keynote document" - and there is no index file (so the usually suggested solution doesn't work)

Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)

Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with.

I am getting this error code when trying to open an mpeg4 "OSStatus error -12909" anyone know why. Thanks

I am getting this error code when trying to open an mpeg4 file "OSStatus error -12909"
Has anyone had this happen to them.
I am new to the support community.
Thanks

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

How to store SP2-0310: unable to open file errors in log file

We are using oracle 10g on Linux platform.
When we send scripts to the clients, then we also send a control file that executes all the sql files e.g.
control.sql
SPOOL test.log
SELECT 'Start of Control File at:'||systimestamp from dual;
SPOOL OFF
@./dbscripts/00_insert_scripts.sql
SPOOL test.log APPEND
SELECT 'End of Control File at:'||systimestamp from dual;
SPOOL OFFThe scripts are executed from SqlPlusW only by typing @control.sql
The problem is that when SP2-0310: unable to open file error comes, it appears on the screen only. It does not go in the test.log file. Is there any way to store these errors in a file from SQLPlusW.
Thanks.

try mentioning full path....
try
@<fully qualified path>/00_insert_scripts.sql
also check if the file has necessary permission
ls -l <fully qualified path>/00_insert_scripts.sql

ID CS3 "Error Code 5" Unable to open, file damaged beyond recovery. HELP!

Similar Messages

Maybe you are looking for