ID CS3 won't hold workspace panel positions

Hi,
I set up a workspace with all open panels on a second monitor, to the right of my main monitor. I saved it as the default w'space but the next time I open ID, the leftmost panels (which are located on the left edge of the monitor) have moved to the right about one inch and overlap the next set of panels. I move them back and resave wspace but next time I open they've moved again.
Any advice would be most helpful
Jon

Why not try removing the plug-in? If the problem goes away after that, you'll know that's the solution to your problem. If it doesn't, you can re-install the plug-in.

Similar Messages

Color space setting won't hold

My display setting for the color space won’t hold. I’ll set sRGB (Control panel/Display/Change display settings/Advance settings/Monitor Color) close the dialogue and all is well for a nonspecific period of time. At some point the sRGB setting will deselect. I’ll reset it but the cycle goes on and on. Has anyone had this experience or know the whys and wherefores?
System: W701; Windows 7 64; Quadro FX 2800M; hueyPRO
Many Thanks,
Fred
Solved!
Go to Solution.

I had a similar problem with my T410, using Windows 7's Calibrate Display under Color Management in Control Panel and I found two critical issues with keeping color calibrations (profiles) active. The first involves setting Windows up to use the profile and the second involves preventing the graphic card's applications from resetting and loosing the color calibration.
First, in order to get Windows 7 to use your color profile, it must be associated with your display in Color Management under the Devices tab. Also, two check boxes must be checked; the first being Use my settings for this device on the Devices tab and the second is Use Windows display calibration on the Advanced tab. This second check box will remain grayed out until you click Change System Defaults and then clicking the Advanced tab.
It is my understanding that color profiles generated by display calibrators can be loaded and handled by Windows in lieu of the third-party loaders. The following link will shed more light on this use of Windows to load the profiles:
http://www.pusztaiphoto.com/articles/colormgmt/win7/default.aspx
Secondly, the graphics card's user interface modules seem to constantly re-set the video card thereby loosing the color calibrations. These may be disabled under the Startup tab in MSCONFIG. On my machine, I disabled three Intel® Common User Interface items: igfxtray.exe, hkcmd.exe and igfxpers.exe. The following links may shed some more light on this:
http://www.bleepingcomputer.com/forums/topic371918.html
http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/color-profile-switches-when-compu...
ThinkPad T410, Model #: 2516-CTO/ i7-620M 2.66 GHz, 4 MB L3, Win 7 Pro 64 bit
4 GB PC3-8500 1067 MHz 2 DIMM, Intel GMA 5700MHD – AMT, 500 GB HDD 7200 rpm
DVD Recordable 8x Max Dual Layer, Ultrabay Slim (Serial ATA)

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

Help! My CS3 won't open RAW files from my Canon EOS 7D..

I have always used Photoshop CS3 - I like it and am quick with it, and I shoot RAW files on Canon EOS.
I don't want to upgrade to CS5, however since upgrading my camera to a 7D, Photoshop will no longer
open my RAW files. I've tried to update plug-ins, I've tried to work through DNG [it won't open those either]
and I've tried for hours on end to get an answer from Adobe on the phone. Nothing is working. Does anyone
have any advice for me please? I'm begining to tear my hair out!! Emma

Hi,
Are you saying your Ps CS3 won't even open the sample DNG file (/Applications/Adobe Photoshop CS3/Samples/Doors.dng)? If that's the case then you need to make sure you have the correct Camera Raw 4 plug-in installed properly.
If it is just DNGs generated from your 7D files, then maybe the DNG Converter options need to be tweaked.
regards
steve

Ipod 3rd Gen won't hold charge

I got a 3rd generation Ipod used for my sister for christmas, but it is having problems that I'm worried about.
First of all, it won't charge through the usb cord hooked up to the computer. It does recognize it in ITUNES but it won't charge. I hooked it up to a wall charger, and it charges fine but it won't hold a charge for more than 10 minutes!!! Any help?

3rd generation iPods don't charge over USB.
If the wall charger is USB, it won't charge the iPod either.
You will need to purchase a Firewire wall charger.

Assigning holder to a position.

Hi All,
I have to assign a holder to a position 'A'. Then hire a new employee with supervisor as the holder of position A. Later on change the holder of position A.
Please let me know the steps as I am new to this.
Thanks & Regards,
Soumya.

Hi Soumya,
Go to Simple Maintenance in Expert mode of Org Mgmt,there u will find PPOM_OLD change..in that u can assign a holder to a position by clicking the staff assignments tab and then assign holder tab.
Regards,
Kishore

Ipod touch 1st generation won't hold charge

ipod touch 1st generation will not hold a charge?

ipod touch 1st generation
Anne...
If you have never replaced the battery now might be a good time since it won't hold a charge.
Apple - Support - iPod - Service FAQ

Brand new ipod shuffles won't hold a charge

I've bought and returned 2 ipod 4th generation shuffles because they won't hold a charge for more than 1.5 hrs after I charged them overnight. Those were brand new ipods and I use them for the gym. Why aren't they holding a charge? Has anyone else had these problems? They are supposed to have a long battery charge. I don't want to keep buying and returning ipod shuffles. My other ipod shuffles haven't lasted long either. The battery quality is very low. I might try a 3rd shot but I'm very frustrated.
Can anyone recommend another brand other than Apple?
Thanks

When you are excercising with the Shuffle do you have it protected with a moisture resistant sleeve or case? If not, there is a good possibility that moisture is making its way into the Shuffle and deteriotating its internal components including the battery.
You could test this out, by replacing the Shuffle a third time, charging it over night, and then seeing how long it lasts on a full charge without using it for exercise.
B-rock

My brand new ipod touch won't hold a charge

new ipod touch won't hold a charge. Genius bar said something might be corrupted, but I have no trouble with my iphone. please advise.

The try restoreing your iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
ALso describe what you mean by will not hold charge..

IPod touch 2nd G won't hold charge. Restore does not help. removing all apps. Still discharges. What gives?

iPod touch 2nd G won't hold charge. Restore does not help. Removed all apps and it still discharges even if not turned on and used for anythig. What gives?

If it is warranty, bring it back to the Genius bar and insist on a replacement. If out of warranty, you can get a replacement iPod with a new battery for $79 at the genius bar.

My ipod photo keeps getting an error message to contact support. won't hold a charge and locks up.

I pod photo locks up, keeps getting error message to contact support. and won't hold a charge.

TR16 wrote:
Called service provider, took to a cell phone repair shop, out of warranty and want to fix this **bleep** pearl 8130 by myself so i don't have to purchase another one (not sure i ever will after the last 3 hours of trying to fix it myself.
White screen when connected to a charge. At times it has a battery with a flash through it and at times an error code comes up. it does not hold a charge for long.
i've downloaded the newest software updat (i think)
i've tried the application loader in desktop manager.
taken the battery out and back in.
Does anyone have any suggestions for me before i throw the phone out my window????
What happened when you tried putting different battery in it? Did you ask to borrow one to test from the carrier?
Or did you purchase a new battery and try it?
Do you have the right battery for this series phone and is it an OEM Blackberry battery?
See the picture below to make sure you have the right battery (note label color)
Let us know.
Thanks,
Bifocals
OEM BlackBerry C-M2
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

My iPod touch won't hold a charge since 1.1.3 update

After the 1.1.3 update, I purchased the iPhone apps for my iPod touch and also added 6 webpage addresses to my home screen. There is two pages on my homescreen. I also added two email accounts, one using yahoo, and one using msn, going through izymail. since the update, my iPod won't hold a charge at all. I haven't really used it yet, but once or twice during the day I check my mail, and other than that it is off. They battery constantly drains, If it is full, it will lose batter life in about a day, just sitting on my night stand turned off. No music or videos are left playing. Is something with the update or my iPod, can I fix it? Oh, I change it from an apple usb wall charger, and I got my iPod at christmas.
Thanks

You say your turning it off does that mean you are holding in the sleep button and sliding the unit off or does it mean you are just locking the unit with the screen off?
If you have the Wifi enabled and only have the IPT in standby mode then this is why it's depleting the battery so quickly. Charge the unit till it's full with the little plug showing and then eject it and turn off wifi and leave the unit in standby overnight and see if the battery depletes at all.
I've noticed that Wifi really ***** the life out of the battery very quickly so give it a try and report back to us.

IPod Touch (5th Gen) Battery Won't Hold Charge

After the last update my iPod Touch 5th Gen will not hold a charge. I haven't had any problems with it until this 8.1.1 update. Yesterday I charged the battery up to full charge and used it briefly to listen to music in my car however here it is the next day and the battery is dead again. It is NOT playing while not in my car. Meaning nothing should be running the battery down because it's not being used. I know it's not playing because the volume is set to half way so I'd undoubtedly hear it if it was playing. It just won't hold a charge and for no apparent reason. Any suggestions?

First:
http://www.cnet.com/news/some-ios-8-users-report-sluggish-wi-fi-shorter-battery- life/
http://www.macrumors.com/2014/09/22/ios-8-issues-battery-drain-wifi/
http://gadgets.ndtv.com/apps/features/how-to-improve-battery-life-on-ios-8-59595 1
http://www.imore.com/how-fix-iphone-6-and-ios-8-battery-life-problems-0
Boost Your iOS 8 Device's Battery Life With This Simple
Then as necessary:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

CS3 won't print

I've suddenly run into a situation where PS CS3 won't print. The Print dialog comes up as usual, but after making the selections and hitting Print, the print job never makes it to the printer(s).I'm using Epson printers and running Mac OSX Leopard. I can print to the printers from other applications, and even from PS CS2. I've checked my scratch disk for space, so the images can be spooled, and have plenty of RAM available. The size of the images doesn't seem to matter.
I recently upgraded to the latest CUPS drivers, but I don't think that should affect PS. Epson says that the printers have built in support in Leopard, so no individual drivers can be downloaded. I would think that PS would be using thebult in drivers that shiop with the OS and not the Gutenprint drivers, anyway.
Has anyone had this problem before, or a solution?
Thanks in advance
William

CUPS and Gutenprint are two different animals, though the former is needed to use the latter.
You'll find the uninstaller here:
http://gimp-print.sourceforge.net/MacOSX.php
CAUTIONARY NOTE for CS4 users: If you have an Epson printer model for which Epson does not offer a 16-bit printer driver (for instance the Epson 2200 don't know of any others off-hand)), the latest version of Gutenprint, 5.2.2, will allow you to use 16-bit printing in Tiger and Leopard. In that case, you may definitely want to keep Gutenprint. I've been running it with no problems for about a week.
Gutenprint 5.2.2, released some two weeks ago, appears very stable and offers several bug fixes from earlier Gutenprint 5.2.x releases.
On the other hand, don't take this as a riniging endorsement of 16-bit printing (yet) if you're not already experimenting with it. I'm very happy with preliminary results, but it does slow printing considerably, as you're sending an awful lot more information to the printer. :)

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

How do you change the workspace panel color in Edge Animate CC (the stage is OK) to a lighter gray, I have the dark gray now. I have Win 7 Pro SP3?

This is a feature as far as I know.
On Sun, Dec 21, 2014 at 10:32 PM, Conquero <[email protected]>

ID CS3 won't hold workspace panel positions

Similar Messages

Maybe you are looking for