Id does not start on SE Xperia Mino pro, ALTHOUGH android 2.1 , it says (device does not meet system requirements)

Was able to install,
but at startup says: the device does not meet minimum system requirements.
sony ericsson xepria x10 mini pro Model U20i
android 2.1 update 1
probabaly the screen is too small?
build 2.2.A.0.504

That device is not compatible with the main mobile Firefox version, but checking the system requirements you may be able to use the experimental ARMv6 nightly builds. For details see https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

Similar Messages

  • My 3rd gen iPad will not update to ios7.0.6. Although connected to wifi, it says I'm not connected to the internet?!

    The message that appears just states, unable to verify update as you are not connected to the internet!?

    Hi Lottiej81,
    Thanks for visiting Apple Support Communities.
    I recommend using the steps in this article to troubleshoot your internet connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best,
    Jeremy

  • My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

    My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

  • My new macbook pro will not download Mavericks, says it does not meet system requirements. Help!

    Mavericks will not download on new macbook pro. says it does not meet system requirements. What?
    Thank you! Sales associate said it needed to be downloaded. I am new to Macbook. Thanks again!

    It already has Mavericks installed on it. There's nothing to download.

  • Installed FFm, but it says "device does not meet requirements"

    Just did a beta upgrade of my Motorola Backflip mb300, to Android 2.1, after a year of waiting I immediately downloaded and installed FFm, it installed successfully, but when I try to open it, it says "device does not meet minimum requirements". I'm sorry but I don't know hardware specifics on the phone, much less any phone. But the only requirement I really saw for FFm was Android 2.0 and above, and this is 2.1 (beta). Could the problem be in the beta phase(?), doesn't seem likely since other apps for 2.0 and above work fine? Any ideas will be appreciated. If there is a hardware issue, any idea if there is an update coming that will work with this phone? Please say it will work.

    Experimental nightly builds are not an option on my Motorola Backflip since Motorola and AT&T have crippled the phone and the OS. They will not allow anything to be installed outside of the Android Market. Any update on this issue?

  • Bios update failed : does not meet system requirements code 9994/9996

    bios update failed : does not meet system requirements code 9994/9996 / Model ny801av-aba HP Pavilion p6100z cto Desktop  windows vista basic  current bios version 5.38, released 03/20/09. 4GB ram (3.5 useable) AMD semperon LE- 1300 socket am2+  code name sparta.  M2N68-LA Motherboard BIOS update verision 5.49 released 08/24/09      (am trying to upgrade to a AMD phenom triple core 8400 2.1 gig that is why I am trying to update the bios, when I put it in I got nothing.)
    This question was solved.
    View Solution.

    Figure 1: Error message
    The error displays when ...
    the update requires certain hardware or software that is not installed on your computer (examples: keyboard replaced with a non-HP keyboard or Microsoft .NET software is not installed),
    the computer does not meet a certain minimum hardware or software requirement (examples: 4 GB minimum memory, 200 MB free disk space, or .NET version 2.0 required and 1.0 is installed) .
    Usually, this error indicates the update is not needed for your computer and it should not be installed.

  • Appworld says my device 'does not meet system requirements'...

    I tried to download Appworld to my Pearl 8120, but it tells me my device does meet system requirements needed to support BlackBerry Appworld... does anyone know what I can do to sort this out?
    Thanks! 

    Do you have a BlackBerry Data plan? You must, as well be in one of the nations supporting App World.
    Read all the requrements here:
    http://www.blackberry.com/btsc/KB17659
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • "Does not meet system requirements" message for Aperture 3

    I am wanting to trial Aperture 3. My mac meets all the system requirements listed on the Aperture site as far as I can tell. However, when I try to load the trial, I receive a message stating that I do not meet system requirements. Any suggestions as to what might be my problem?

    Hi Schmidt3;
    I am using Aperture 2 on my PowerMac G5 Quad without any problems.
    Allan

  • Can anyone help pls, my computer says 'device drivers not found?? ;-(

    can anyone help pls, my computer says 'device drivers not found?? ;-(

    Is the latest version of iTunes installed?

  • In my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

    in my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

    Try Settings > General > Reset > Reset network connections.
    Other basic troubleshooting from the User's Guide is reset, restart, and restore.

  • Zune Software does not start on WIN 8.1 PRO

    whenever I need to run ZUNE software to update my phone or just edit my music collection my Zune software does not start.  I only get a window alert saying [Windows cannot find 'C:\Program Files\Zune\Zune.exe'.  Make sure you typed the name correctly,
    and then try again.]
    Troubleshoot performed:
    -uninstall software, reinstalled with administrative privileges, run the program and does not start, end up with same message.  (many, many times)
    - Installed it in different directory, installed all windows updates, run program and same symptom
    - installed the MUSIC app from windows Store, helps but does not let me edit mysong collections app really is not the appropiate one
    -cannot download my photos or videos, please HELP!
    *** Is there a way I can download my pics and videos without ZUNE?  Is there a FIX IT program for Windows 8 PRO, just in case there might be a problem with registry entries? ***
    Machine  DELL XPS
    Windows 8.1 PRo
    Intel Core i7 - 16 GB RAM 64 bit Operating System, x64 based processor

    Whaaaaaat...???????
    It is not compatible?  How do i transfer my music, pictures, videos.???   Cant beleive it..!!
    HELP HELP

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • FireFox will not start due to message indicating that ssl3.dll is missing and indeed it is not in the program files. But I can not seem to be able to reinstall Firefox or to copy the ssl3.dll file into the program files. Help?

    Webroot identified ssl3.dll as a threat and deleted it. Now I can not start Firefox, nor can I copy ssl3.dll into the Firefox Program file. I tried uninstalling Firefox and reinstalling it, but it always shows as an upgrade and does not seem to add ssl3.dll. HELP?

    1. Open Webroot
    2. Click on PC Security
    3. Click on the Quarantine tab
    4. Select ssl3.dd
    5. Click restore

  • My MacBook Pro will not start at all., My MacBook Pro will not start at all.

    The only previous problem was a few days ago the colors on my display looked a little off/fuzzy. I immediately restarted and the problem didn't return. Then today, I had it shut but when I opened it it was off and will not start again. It sounds like it's on as there's a slight fan noise, also the charge lights go up to fully charged. But there is no noise or anything when I try to start it.
    I'm not sure  if this is a coincidence, butt I started using a new charger today. It was second hand but the same one as before.
    It was purchased in early 2012, not sure what OS.  Any help is appreciated!

    Reset PRAM. http://support.apple.com/kb/ph14222
    Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Test with another charger. If this does not help, contact Apple.
    Best.

  • Windows says "device is not functioning" and "Windows does not recognize"

    I lost my USB dock connector cable for my ipod. I just went out today and bought a brand new "Cygnett GrooveLink Strech Retractable USB Cable for iPod". I was pumped when I came home to finally be able to add music to my ipod again, but alas when I plug the iPod in, Windows pops up saying that the device is not functional and that Windows does not recognize it. I tried everything from rebooting the iPod to re-downloading iTunes and iPod updater. After searching this site for the past few hours, I figured I'd try and possibly find some real answers here. Please Help!!

    Hey everyone,
    I had the same problems all of you are having. I
    just got a 5th generation video ipod. For a few
    days, my computer a) wouldn't recognize it; b) froze
    up when I connected it; c) mistook it for a mass
    storage device ("drive E"). I bought a USB 2.0
    notebook card which didn't work either and actually
    seemed to make the problem worse because when I
    connected the iPod to it my computer froze up.
    I was very confused because my new iPod worked on my
    brother's computer--which is much older than mine but
    still recognized the iPod and connected to it.
    Then I noticed that my brother's computer is running
    an older version of the ipod software. I used his
    disk to install "Ipod Updater 2005-06-26" rather than
    the new version of the software on the Apple Web
    site. Then I plugged my iPod into a USB 1.1 port.
    To my surprise, my computer finally recognized the
    iPod and is now loading music onto it. I cannot
    believe this worked. I wonder if the latest version
    of the software is faulty in some way.
    Try it! I hope it will work for you too. You will
    need an older version of the iPod updater software,
    so borrow it from a friend with an older ipod.
    I am having this problem also...It will work fine on the 1.1 but when i plug it into the 2.0 it has trouble recognizing it...

Maybe you are looking for

  • Installation date... Stupidity & Lies

    So we were moving house... Please choose an available date... Saturday 8th February 2014. All going swimmingly. Text message... Your installation has been moved to Monday 10th February. Go on BT, take a wild guess as to why I chose Saturday morning,

  • Reclasification FAGLF101

    Dear all, I am executing FAGLF101, reclasification of vendor payables. The system does not proprose an adjustment posting in  FAGLF101 transaction. There are payables with due date longer than 1 year and the program is supposed to offer a reclasifict

  • HT1444 Need to download Xcode but I don't have OS X 10.7.3

    I currently have Mac OS X Version 10.6.8 and I want to download Xcode from the Mac App Store but it won't let me because I need OS X 10.7.3. How do I do this? Will I have to purchase it?

  • Lost Adapters in Adapter Monitor

    Hi, buddies, We've applied install guide SR1 and Release 3.0 SPS18. But in our adapter monitor, there's two adapter engine, both of which contain only the "JPR adapter" with green status and no other adapters. Anyone who can help us? B'Rgds,

  • VS 2008 Protection Levels & Deployment

    Hi All, I have developed a SSIS solution with multiples pacakges in VS 2008 using the protection level of Encrypt Sensitive with password, because VS 2008 wasn't saving the OLEDB passwords. So now it prompts me to enter the password each time I open