ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Similar Messages

Q: I don't understand how to use the teeth whitening tool in PSE 9.

I've been going through the tutorials and following along pretty good but i got to the Perfect Portrait guided edit and didnt' get how to use the Teeth Whitening tool...it seems to select the teeth but then I'm lost....what am I supposed to do at that point after the marching ants are marching around the teeth?

I’m not sure what’s going on, but obviously something is not happening.
You could also try the dodge tool (keep pressing the letter O on your keyboard) until you see the blue dodge tool. No selection necessary.
Enlarge your image to about 200% and use the square bracket keys to increase or decrease the cursor size to fit the area to be whitened. Set exposure in the options bar to about 50%. Gently brush over the teeth area until you get them as you like.

How to use the Dynamic Configuration Bean

Hi experts,
im currently doing a file to mail scenario.
i want the name of the input file as the subject of the mail.
i want to establish this using the Dynamic Configuration bean
my first question is:
key.1 <b>read</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
this reads the value of the message ID into the attribute THeaderSUBJECT
but what does this do?
key.1 <b>write</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
when i use this it has no effect atall.
my second question.
I have my input filename in the FileName attribute in Dynamic configuration how can i read it into THeaderSUBJECT attribute.
Appreciate any suggestions.

Hi Satish,
Yep i know its possible via an udf in Message mapping but i dont have an MM in my scenario. Since im not parsing thru the input data since its an excel file, so im transferring the file using the following method
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
and in this method if i include an MM it will give me a mapping exception.
So i have to use this bean somehow and try to accomplish what we do in the udf.

Does the test configuration send an actual message?

I am working in the IR and using the Test Configuration tool to check my objects. I place a payload into the payload box and execute each step. They are all green lights. My question is does the test configuration actually send the message to your receiver determination communication channel HTTP destination? I am using the http to transport XML. Should I be able to see the transfer in sxmb_moni?
Thanks

Hello.
If you do want a real message invoked - use http://<pi server address>:50000/rwb
go to component monitoring -> Integration Engine <SID>
then go to tab Test Message
Fill in the service, interface, namespace, and a user and password with credentials to send messages
Select Quality of service (Best effort for SYNC, Exactly once for ASYNC - EO, and Exactly once in order for ASYNC - EOIO)
and put the payload you want to send to the PI, and press Send Message.
This will really make a message in the integration engine.
Hope it helps.

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

Using the healing brush tool

Anybody able to give me a simple explanation of how to use the healing brush tool to retouch photograph?

I'm using Windows 7 Home Premium... And I'm using Photoshop Elements 10 with a Wacom Intous 4 tablet and pen.    I noticed this behavior right after a forced reboot from a Microsoft update yesterday. I was editing a pic when it rebooted.
Now, the behavior only manifests itself within Photoshop Elements when I use tools that use reference points such as the clone tool or healing brush. It's a trailing dot that seems to echo the reference point; which eventually catches up to place itself right under the tip as I make a stroke.   I can't really see what I'm doing, so I end up making a big mess of things on my pics. This also occurs using my logitech mouse...   Check the mouse settings as well, and it not using any trail options.
Called Wacom and they had me uncheck "use microsoft ink" from within the Wacom properties. They identified the problem as the "ripple effect."     I've disabled the "press and hold" feature the "pen and touch" options in windows, disable the Tablet PC Input service, and made edits to "TurnOffPenFeedback" in, both, the local machine and local user in order to disable it. So far, nothing has worked.   If it makes a difference, I noticed that every time I edit the local user registry entry, it enables itself after each reboot.   Haven't fingered the cause of this yet.     Please let me know if you have any other ideas. Thanks!
Brian

How do I use the cookie cutter tool?

I have a lot of questions to ask on how to use this program. I have Adobe Photoshop Elements 8, and I can't seem to get the tools to work. I click things on and nothing happens or I get a buzz indicating that whatever it is I want to do, I can't. I went to the cookie cutter tool and clicked that on. I figured out how to pick a shape, but then what? No matter what I clicked, nothing happened. How do I get it to work? I have a book called 'Teach Yourself Visually Adobe Photoshop Elements 8' and the pages are very clear, but whatever options are given in the book, I can't find in my program. I am sure part of the problem is that i have this program on a Mac. Maybe the Mac version doesn't work like the PC version. I can't seem to find any directions for this. I clicked on help and it brought me to a web page for Mac Photoshop Elements 8, and I did a search for 'cookie cutter' and nothing came up. I also looked at all the options available for help and didn't see any 'cookie cutter' tool instructions. How can I learn how to use this software? Thanks for any help.

I don't remember what the directions were yesterday, when I was experimenting with Photoshop, but I believe that the directions told me to use the custom shape tool, but I couldn't find it. It said to click on the rectangle, and a menu would come up, but no menu came up. So I thought I would just experiment and click on 'cookie cutter' and see what would happen when I clicked on it. I tried using some keyboard shortcuts to see what would happen (just trying to figure out how to get something to work) and at the web site for Photoshop for Mac, it said to click 'Q' (I can remember what was supposed to happen), but I clicked 'Command' and 'Q' at the same time and it closed the program! The web site didn't say which other key to use with the Q, and nothing happened when I just clicked the Q. Another thing I was trying to do was to make something in Photoshop (this was on another web site) and I had to go to 'window' then the next step was to go to 'channel' and click it on. I went to window and there was no 'channel' in the drop down menu. There were other options, but no 'channel'.

How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
http://adobe.ly/STegFg

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. How do I fix this?

I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. I've reinstalled twice and it will work for a little while and then get stuck again. When I select something, I have one shot at it and as soon as I let go of the mouse it switches to minus and I can't add anything else. How do I fix this?

When a tool misbehaves, go over to the far upper right corner of the tool options area and click the four-lined square. Choose Reset Tool from the popout menu.

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
Just noticed this; SWEET!
-----ProcedureTo perform a test using the hardware diagnostic tool on the BlackBerry smartphone, complete the following steps:
On the Home screen on the BlackBerry smartphone, click Options.
Select Status.
On the Status screen, type test.Note: On BlackBerry smartphones that support SureType® technology, use the multi-tap input method.
From the menu on the Device Self Test Application screen, select Start.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

This is cool!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to use the mesh tool

I am not sure how to use the mesh tool

it can be tricky! it's best to use with geometric shapes and not random figures that you create with the pen or brush tools.
so lets say you wanted to make an apple using a real picture for reference. first off, you'd place the picture of the real apple in the background. next, you would choose the circle tool to create a circle around the apple. then, you would use the mesh tool and press the center anchor to create a simple grid looking form onto the circle. grab the selection tool to move around the anchor points surrounding the apple to make a more accurate outline. after this step, it's easier to add more anchor points for the actual apple! all you must do is grab the pen tool and add more anchor points along the path and use the selection tool to move the anchor points around the apple; eventually it'll look somewhat like a 3D graph of an apple. important tip to remember, the less lines the better. but a few are okay.
so after you've graphed/mapped out your apple you're going to want to press the selection tool and use your eyedropper tool to get an accurate color of the spot/anchor you selected. the basic point of the mesh tool is to outline a picture,@ and with the eyedropper tool you can use the exact colors from the original picture you're working from. i learned this technique from class. here's my example it can be a really useful tool if it's what you're looking for.

How to get the best results using the refine edge tool?

how to use the sliders in the refine edge tool? how do you get the best results using the fine edge tool?

You should ask in the forum for the (un-named) program you are using
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to I connect using the Data Mining Tool if Windows Athentication is a seperate AD account

I use a ERP solution in a Cloud which provides SQL Analysis Services and Cubes. They create for us users within their Domain AD separate from our local (in house) AD. When I attempted to use the setup up tool to connect to Analysis Services that I do not
administer it did not give me the option to authenticate as a different user or account other then my own domain.
I am using SQL 2012 and Microsoft Excel 2013

There is no use for testing named pipes. As I said - it is an excellent method for IPC. It is slow and unscalable for networking, especially WANs.
A few minutes of googling this subject and doing some bit of research, would highlight this quite clearly.
BTW - if you think named pipes are better for tcp, then don't you think Oracle would have recommended its use? Heck, Oracle recommends using the RDS protocol for the RAC Interconnect. A protocol not widely known outside the HPC environment. So surely they would have sung the praises of more commonly known named pipes for tcp if it was any good?
Which again points to the fact that it ain't good and your wasting your time by trying to be "clever" and barking up the wrong tree.

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

no apple configurator connects via usb
you'll need a MDM solution such as OSX server profile manager for remote wipe
OTA pushing profies remote wipe etc
you could use icloud for remote wipe

ID: How to use the test Configuration tool

Similar Messages

Maybe you are looking for