Id like to be able to initialize my 7344 Motion Controller card from within Labview and not through motion and automation explorer

Every time I boot my PC , I have to reinitialize my 7344 through Motion and Automation Explorer  in order for it to work. Does anyone have any suggestions as to how to initialize it from within labview itself?
thanks

Hi,
I am sending you a Vi for initializing the controller.The only thing you have to do is that you need to use sequence structure. In the first sequence you need to use the VI which is attached i.e 0 (default). Then the next sequence will be the program itself.
So that as soon as you run your vi the first thing done will be initialising controller using LabVIEW. Then your program will run.
Here the led in the front panel will glow green only the first time you are initializing.The next time it will be dim but no doubt your initializing will be taking place.Hope this vi solves your problem.
Thxs
Manish Karnik
Application Engineer
Cruiser Controls
Mumbai, India. 
Attachments:
Initializing controller.vi ‏42 KB

Similar Messages

  • Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.

    Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
    As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
    VERY ANNOYING.  Can I open apps in the background?

    Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works.  I found a solution that I can use in the dock from another post. 
    Annoyed by Mac OS
    Works great and allows me to maximize those multitasking minutes.

  • Hello I have a mac book pro (lap top) and it's version is 10.6.8.i want to up grade it to 10.9.2. version .i downloaded version from apple store twice and it is un able to installing; give me error massage of installing.the error has not any number and it

    Hello
    I have a mac book pro (lap top) and it’s version is 10.6.8.i want to up grade it to 10.9.2. version .i downloaded version from apple store twice and it is un able to installing; give me error massage of installing.the error has not any number and it says :installation can not be complete with a red sign. please say the solution.also how i can get  the 7.0.0. version up date from apple store . i searched very much but i did not find the version .

    What MacBook Pro model do you have?  Check the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware and then the Model Identifier...has to be at least MacBook Pro3,1 to install Mavericks.

  • I have a Windows PC with iTunes and an IPod Touch.  I would like to be able to sync music in two areas.  Would the Airport Extreme accomplish this?  And, if so, are there step-by-step instructions somewhere?

    I have a Windows PC with iTunes and an iPod Touch. I also have a Verizon MiFi.  I would like to be able to sync music to two locations.  Would the Airport Extreme accomplish this, and if so, are there step-by-step instructions somewhere?

    No, it will sync the ipod to the content of the MBA which presumably has nothing on it (= erasing content of iPod and replacing it with nothing).
    Ideally:
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
    Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html
    if you absolutely must use the iPod:
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
    http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store

  • Like so many others I have not been able to access or send emails with iCloud now loosing business. Not good enough and lack of info from Apple is also not good enough!

    Like so many others I have not been able to access or send emails on iCloud.  This is now loosing me business! Not Good enough Apple and your lack of information is poor customer service.

    Unfortunately, Apple does not yet allow merging of Apple ID's. if you were once using [email protected] as your Apple ID then there is no way to link that ID with the new one to avoid losing the previous data under that old ID. You will have to either go back to using the old ID to save the old data or just keep both, which you arfe allowed to do.

  • In iMovie is there any way when you import your files to just make the file an alias like final cut does and not actually import and copy the whole file again into my mac. It's taking a lot of my space up. Thanks

    I just want to see if there is any way that I can import the files into iMovie as an alias like Final Cut Pro and Express does. I hate having to copy the file again because it takes up alot of space on my Mac. Thanks.

    No, but you can import your Event to an external drive from the import screen.
    It is also possible to create a symbolic link to another location. The link stays in your iMovie Events or iMovie Project folder, but the actual file resides somewhere else. I don't do it this way, so I can't share any details.

  • I would like to be able to sync from another ID on the same computer that sync now works on.

    I have a laptop running XP SP2.
    Sync was setup on this machine on an administrator account, and works fine. I usually run this machine from another non-administrator account. The device I am syncing to is an iPod Touch.
    I would like to be able to use my existing Sync account.
    When I start to add this device and am typing my email address in it does not let me complete the field.
    I am running FF4 beta.
    Could someone please assist me with this problem.

    When you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

  • I am no longer able to send emails from within iPad apps.

    I always used to be able to send files with attachments by email from within iPad apps like Adobe Reader or Pages. Used to work but now it doesn't - and this for all apps all at once. It gets to the point where it has prepared the email, but if you press send, it says "Could not save or send message". It also doesn't matter which email account I use - result always the same. It's a real pain as this was a good way of editing a word file and then emailing it to myself.

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

    i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

    The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

  • I would like to be able to see my work and personal calendars in one view although I'm having a lot of difficulties.

    I have :-
    An iPhone 4S set up with my personal calendar syncing to my iCloud account. All works fine.
    A blackberry 9320 from work which is set using enterprise and encrypted with my corporate email (outlook 2010) and calendar. All works fine
    I'd like to be able to see all my appointments/calendar all in one view so I can ensure I don't have meetings clash. This however seems impossible and I'd like some help.
    So far I have tried using the active sync function to pull my corporate calendar through to my iPhone, this was successful but my company has now after 3 months disabled the function (after a new sever install, and despite challenging it is still not likely to be turned back on,due to security concerns).
    I have tried entering a gmail calendar or iCloud calendar to my blackberry but again this is restricted by my company (to reduce data charges).
    I'm currently struggling with inviting each calendar to each event but is not always easy and I'm getting muddled.
    (Btw reverting to just my corporate calendar is not possible as I need to share my personal calendar with my wife, or I'd never see her).
    Does anyone have any advice, app, procedure to help me get both of these together.
    Thanks
    Simmshady

    What app are you using to access your email?  That is where I would start first.  Also check the webpage desktop version of your email homepage for further options in settings regarding personal options to include folders, views, and etc...

  • I would like to be able to download updates for my Iphone and Ipad on my work computer but my home computer has all of my music on Itunes.  How do i downlaod updates at work without deleting all of the music which is stored on my home computer/Itunes?

    I would like to be able to download software updates on my Iphone and Ipad at work without erasing my music.  My home computer/Itunes has all of my music saved.  is there a way to use two computers w/o erasing information?  Or can i transfer the music from my Iphone to my work computer?

    - An iPod can only sync with one iTunes library. Yu can however manage music and videos among different computers by:
    Using iPhone, iPad, or iPod with multiple computers
    - To change syncing computer, move all the media to compute r#2
    - Connect the iPod to #2 and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note tha the iPod backup the iTunes makes does not include synced media like apps and music.

  • I like to be able to edit and delete individual text messages but since the update only have the functionality to delete a whole conversation

    I would like to be able to delete individual text messages not a whole conversation. With the iOS 7 update this is no longer possible.

    411frustrated wrote:
    I have noticed that with the new IOS 8.1 update when we do this the text messages no longer go back in chronological order.  Do you have this problem?  It is really frustrating me.
    Yes, that's the way it works now.

  • I have an email attachment that I would like to be able to access when NOTconnected.  I found one suggestion that I should open the attachemtn iniBooks and save it there.  Unfortunately, I have no idea how to do that.

    I am trying to store an email attachment (an Excel spreadsheet) somewhere on my iPhone 5 to be able to access it easily in the future.  I do not need the ability to work on it, just to access it, although it would be convenient if i could load updated versions over it on a regular basis.  The spreadsheet was created in Excel on a laptop with Win 7.  I read one posting that said I should save the document to iBooks and then could open it whenever I wanted.  The same posting refered to something in the upper right corner of the attachment that enabled me to save it to iBooks.  Unfortunately, there is no such option showing when I looked at the file, which I did email to myself.  I was able to open the attachment, but can't get beyond this point.  My tech ability doesn't go much beyond being able to power up my phone, so I need a really simple solution, if one exists.

    First of all, Excel file can't save to iBook.  (iBook only can view PDF files). That's why you don't see it in "open in" options.  In order for you to save excel, you will need a third party app like Numbers, Office2.  There are a few free apps that can use to view.  I used Office2 from Byte2, because I can not only store and view later, I can do some edit too.  Especially when you want to edit a few numbers and re send them to my office or clients will be very useful for me. 

  • Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still us

    Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
    Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...

    You may be mixing up two entirely different Adobe products.
    1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
    2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.

  • I would like to be able to print a pdf from a DPS app.

    Is there a way to do this.  I understand how to get the pdf to open and view within the DPS app, but I would then like to be able to print it.

    If you have the Apple Camera Connection Kit (CCK) and the video that your camera generates is in one of the formats tha the iPad supports then you can directly move it to the iPad with a USB connection.
    See: Apple iPad Camera Connection Kit

Maybe you are looking for

  • Big crash sound sometime since OSX 10.9 and 10.10...

    I have sometime a crash sound (sound destroy since 2/3 seconds), and I haven't find how resolve that I have a macbookpro 2009, core2duo, 8 Go Ram, SSD internal, sound cart external Motu UltraLight MK3 (Firewire connection). 1) Before with OSX 10.8 Mo

  • Filter on multiple Date

    Hi, I have an ODS with 8 different dates. Specifically two dates for each Infotype. A "Valid From" date and a "Valid To" date. When I create a query , i want that at the beginning of the query, I can insert a variable so that the filters are made on

  • Channel Strip Settings missing 'Legacy' option

    I am missing a large amount of options from my Channel strip settings drop down menu, a normal click gives me the following on a software instrument channel: When I hold alt and click I get the following: I am not being given the option 'Legacy' or o

  • Microsoft Server with Mcafee SIEM auditing settings

    Hi, Recently we have implemented Mcafee Enterprise security Manager SIEM To collect all events and logs from all network, servers, event viewer and other logs. I'm looking for what exact configurations should be made on Microsoft servers to enable au

  • Very slow mbp

    results from the diagnostic scan,PLEASE HELP!  It took me over 2 hours to open Safari to post this!!! Problem description: processes are working very slowly EtreCheck version: 2.1.1 (104) Report generated December 9, 2014 at 7:18:48 AM EST Hardware I