ID only lists one type of Times font

ID CS 3 on XP Pro SP3 system. I have both an open type (with True Type outlines) and type 1 version of Times New Roman on my system, but ID only lists the open type version. Is there a way I can get it to list both, because the open type shows up as an embeded subset of a true type font when I export files to PDF? BTW, my ID font file is empty, so I imagine ID only looks at the system font folder for fonts.

I don't know what would solve this particular problem, but I'd recommend using a 3rd party font management progam.
I use fontxplorer, but there was a better free one listed a few weeks ago that I can't find the link for. Maybe someone else can chime in?

Similar Messages

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • How do I delete more than one email at a time on Mavericks?  I can only do one at a time.

    How do I delete groups of emails with Mavericks?  I can only delete one at a time.

    Select the first one then click on the last one with the shight key depressed to select then all then delete.
    Allan

  • I've purchased cartoon tv shows for my iPad. Prior to the new updates, I could play one at a time or continous. Now I can only play one at a time. It's annoying to keep changing it every five or six minutes. Is there a fix to get it back playing continous

    I've purchased cartoon tv shows for my iPad. Prior to the new updates, I could play one at a time or continous. Now I can only play one at a time. It's annoying to keep changing it every five or six minutes. Is there a fix to get it back playing continous

    Use this feedback form and tell apple. http://www.apple.com/feedback/ipad.html

  • 2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc but it is on so can only use one at a time to watch movies from my computer

    2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I  can only use one at a time to watch movies from my computer

    Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
    what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids.

  • When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

    when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

    here is one that is imported and stays .mp4. the specs are same as original file before import.
    here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

  • I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    You may have t opurchase one.  Some only do a limited number of transfers without paying.
    - Make a backup of yur iPod by connecting the iPod to the computer and right clicking on the iPod under devices in iTunes and selecing Backup.
    - Restore the iPod from that backup.

  • Podcasts in a playlist only play one at a time instead of in seq

    I just got a 6G nano iPod.
    I have smart playlists that include my favorite podcasts in reverse time sequence.
    When I play from this list, only one episode at a time will play.  After the episode completes then the iPod goes back to the playlist where you can manually select the next podcast.
    This works fine on my 3 or 4 G (I don't know which it is) nano.
    I want to play all the podcasts in the playlist one-after-the-other without stopping playback.

    I have smart playlists which have Media type "Podcast" and Play Count = 0.  These playlists were only playing one song at a time.
    The solution that I found to the problem was to
    connect ipod
    goto ipod in devices
    select podcasts
    select sync podcasts
    DON'T SELECT AUTOMATICALLY INCLUDE ALL EPISODES OF ALL PODCASTS
    Scroll down to Include Episodes from Playlists
    Then select all the smart playlists that include ipod episodes.
    This means those playlists are copied to the ipod and they play in order.
    It doesn't seem to matter whether or not the playlist is selected as well under the Music tab.

  • Songs will only play one at a time

    After updating iTunes, using the last update 7.6.2, it will only play one song at a time and stops. It will not play continuously through a playlist. Am I missing something in the setting? Any suggestions?

    Are there check marks beside all the songs in the playlist? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

  • My Itunes will load on Apple TV and play, but only plays one song at a time.  It will not shuffle or continuously play an album.  All of the songs display, but will only play one at a time...home sharing is on.  Any suggestions?

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

  • I would like to send multiable photos by email ,at the moment i can only send one at a time  thanks

    Hello ,I would like to send multitable photos by Email . at the moment i seem to only be able to send them one at a time  thank you marie

    I do not see an issue here ....just add a submit by email button at the end of each section and enter the email address that you want in each.

  • AirPlay and 2 apple tvs (streaming only to one at a time) - possible?

    Very brief question.
    I am thinking of getting two Apple TVs - one for the liing room and one for the bedroom, with a view to streaming any films etc i have on my iMac to the device.
    I've googled and can't find any reference to whether 2 apple tvs is possible - i.e. does the iMac show 2 devices and i can choose which to stream to?
    I'm aware that i can't stream to both devices at the same time.
    So in short, am i able to setup 2 apple tvs and decide which to stream my movies to?
    Cheers!

    It's more or less been said already, but when you don't already have an Apple tv, streaming terminology can be a little difficult to grasp.
    There are two ways to stream content to the Apple tv. You can initiate the stream from the iMac or from the Apple tv.
    If you choose to initiate the stream from the iMac (Airplay) you can only stream one item at a time.
    If you initiate from the Apple tv you can simultaneously stream different (or indeed the same content) at the same time to different Apple tvs.

  • Why does my iphone only send one picture multiple times when i select multiple photos to send?

    why does my iphone send one picture multiple times when i select multiple photos to send (via message or email)?

    Are you sending via Camera itself?
    That is, selecting a picture, then select forward link symbol from bottom left
    then select another picture,
    Each time make sure you see the blue check mark at bottom right of each selected picture.
    The number of " # Photos Selected" should be displayed at the top.
    Then select Mail or Message and transmit.

  • Everytime I try to watch a video or load pictures on a site it tells me I have to download Adobe FlashPlayer.  I do it every time but then can only upload one picture at  time.  If I want to load more pics 5 min later I would have to do it again Why?

    Problem with Adobe Flash Player needing to be repeatedly downloaded.

    If you can't install or update Flash, follow these instructions.
    If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
    In the sheet that opens, check the box marked
              Delete All Site Data and Settings
    then click Delete Data. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked 
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • Siri only lists one store to find

    When using Siri I was playing around and asked for a tax preparer in the area.... While I am on a block with about 15 it gives me only one name.... Do people advertise with Siri so only their name comes up?

    I don't know what would solve this particular problem, but I'd recommend using a 3rd party font management progam.
    I use fontxplorer, but there was a better free one listed a few weeks ago that I can't find the link for. Maybe someone else can chime in?

Maybe you are looking for

  • MOPZ error while generating stack file for EREC upgrade

    I need to upgrade E-Recruitment 604 to 606. Currently we are on Netweaver 7.01 While adding this system in SOLMAN 7.1 SPS 05 in order to generate stack.xml file i manually selected this product system in product system editor and we had selected belo

  • Getting The message Download Error in creative cloud

    I keepgetting this error everytime i try to acces the apps in Creative Cloud. I need to reinstall Premiere, and Im now stuck without getting any work done. I really regret upgrading to Creative Cloud. All the software seemed to work better before:-(

  • My imac 10.6.8 makes 3 burps-beeps.

    My imac 10.6.8 Snow Leopard makes 3 burps-beeps while running (not at start-up) Nothing goes wrong or happens, just makes the 3 weird noises while sitting with a web site open. How do I stop this. Only happens about 2 to 3 times a day when it does th

  • Dreamviewer CS5 opens but shuts down right after first view again and again...without no error information

    I have Adobe Premium CS5 for MAC. My Dreamviewer CS5 opens but shuts down right after first view again and again. With no error information. I have tried to download it again (web download link) with reopening the computer, but still it does not work

  • Cant get Officejet 4630 to install on W8.1

    I just bought the officejet printer and tried installing using a usb connection.  Printer shows up in device window as a printer, but cant be seen as a printer to apps.  Also, when you right click, no printer command come up.  Only scanner options. S