ID3 gradient out then in then out again

I have a long horizontal rectangle object. I'd like the far left to be white, the middle to be a certain color, and the far right to be white again -- a smooth gradient transition with white on the left and right edges and the color in the middle. How can I do that? If it requires two gradients in the same object, how do I pull that off?

Add a triangle to your gradient. As many as needed to get the required effect.

Similar Messages

Error message when accessing iTunes Store: "iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again." Internet's fine! Please help!

Everytime I try to access the itTunes Store, this is the message I receive:
iTunes could not connect to the iTunes Store. The network connection timed out.
Make sure your network settings are correct and your network connection is active, then try again.
The internet connection is fine. I don't know how to fix this problem, and in the meantime I cannot connect at all to buy songs. Thanks for your help.

I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us.

After I did a change in the drumsection on a song the program just "went down". It's impossible to go back tinto the program. It just tryn to open the song, nothing happend and then out again... What can I do?

After I did a change in the drumsection on a song the program just "went down". It's impossible to go back tinto the program. It just tryn to open the song, nothing happend and then out again... What can I do?

see if anything in this troubleshooting article helps: http://support.apple.com/kb/HT2801?viewlocale=en_US

TS2446 My apple ID has been disabled. I changed my password. Signed out then in again. Still disabled. What should I do?

My apple ID has been disabled. I changed my password. Signed out then in again. Still disabled. What should I do?

try this website https://ssl.apple.com/emea/support/itunes/contact.html

My i phone 4 cannot charge continously. it will charge then after few seconds its off then charge again. I cannot open it because it runs out of battery do i need a new battery?please help.

my i phone 4 cannot charge continously. it will charge then after few seconds its off then charge again. I cannot open it because it runs out of battery do i need a new battery?please help.

You could always check to make sure itunes is updated to 10.7 but im sure gdgmacdude is
right.
thanks
gdgmacdude
Hey dude
are there anymore hardware failure errors u know of
im kinda a novice apple man and could use all the help i can get
capp

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

just do a reset, you lose no data.
hold down the home/sleep button together until you see the apple logo and then release.

I had greyed out wifi, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

i had greyed out wifi on my iphone 4s, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Particles flow in to form text and then flow out again...

I was wondering if there was a way to do something like this in After Effects... i'd like to have particles of some sort blow in from screen left... form text for about 5 seconds and then disintegrate again and blow away through screen right
anyone know how I might achieve this?
would I need some sort of plugin?

You can do this in a variety of ways from using Particle Playground, Card Dance, Shatter to CC Particle World to third-party plug-ins such as Trapcode Form and Particular. There just won't be any instant solution with either of these. All of them require multiple instances, custom parameter maps and/or heavy parameter animation as well as time-reversal techniques since naturally most particle systems expand/ explode ratehr than to "suck in". realyl depends. i recommend you study the VideoCopilot site's tutorials section, Tuts+ and other resources. and look for something suitable to get started, then come back with more specific questions.
Mylenium

HT202159 Hi can anyone help? Can't download - Mountain lion now permanently 'paused' in the dock. Purchase page does not have the resume button and I have already signed in & out again... HELP!

Hi
Can anyone advise...
Cannot download Mountain Lion after purchasing from Apple online. Mountain Lion icon is now permanently 'paused' in the dock. The Purchase page has the download but no resume button. I have enter the code again but it cannot be redeemed again. I have signed in and out again from the tab at the top of the page.
I have spoken to Apple for two evenings now. Last attempt was to bypass the Mountain Lion and download Mavericks overnight but nothing downloaded.
I have checked the internet connection and all is well.
Any ideas how to progress... I have an appointment to take in to Apple on Monday...

Have you tried to resume the download using Launch Pad? The icon should be in your Dock.
If that doesn't help ...
Apps such as Little Snitch, Growl, and MacKeeper can prevent apps from downloading
Disable anti virus software if installed
Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Dvd vcr combo slv-d370p doesn't allow time to be set. Displays "please wait, then try again"

There is no disc or tape in the machine. I have tried waiting up to 8 hours to no avail.
I tried unpluging the machine for a few minutes, and plugging it back in.
Same result, please wait, then try again.
The machine says this every time I press set up. Is there a work around that I haven't figured out?

The PLEASE WAIT AND TRY LATER error will display when trying to access the setup menu if a tape is playing. Stop the tape before attempting to access the setup menu. However, if this occurs even if there's no disc inside then the player may require service. Please click here to check for your service options.
If my post answers your question, please mark it as "Accept as Solution"

Z77 g45 turning on then off then on again

OK so I was on my computer I turned it off when I went to turn it on it just goes on for like 2 seconds then off again I tested by using one ram and it still does it also I switched the psu out and it still does it is it a faulty board

This from the z77a-g45 as you didn't specify which z77g45 mobo you have.
Quote
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
mainboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you want
to clear the system configuration, set the jumpers to clear the CMOS RAM.
It is just above pcie_5
From the z77ma-g45:
Quote
Jumpers
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
mainboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you want
to clear the system configuration, set the jumpers to clear the CMOS RAM.
This one is dead in between the two pcie slots and next to the battery.
Short the pins while the computer is off and the power cord has been removed.
Quote
Important
You can clear the CMOS RAM by shorting this jumper while the system is off. Afterwards,
open the jumper . Do not clear the CMOS RAM while the system is on because it will
damage the mainboard.
>>Clear CMOS Guide<<
If this doesn't work you will need to switch the ram sticks/ try them in different dimms to see if there is a change.
Since you won't give up and additional information some other things to try:
Remove any vga you have installed and try onboard.
Remove the mobo from the case and build in on a uncoated piece of cardboard or other non-conductive surface to make sure there are no shorts.
Remove any usb devices you have plugged in .
Remove the SSD and see if you can at least get to bios.

Feeback error: "Your feedback seems to contain a URL. Please remove this and similar personal data from the text, then try again."

error when using feedback: "Your feedback seems to contain a URL. Please remove this and similar personal data from the text, then try again. Thanks!"
Using FF4.0 b10 with MS XP sp3

well, for starters, is there a URL (link) in the text? if so, you will have to take it out, and include it in the little link area under the comments box.
If not, check to see if you have 'Http://' or '.com' or something similar in the text.

ID3 gradient out then in then out again

Similar Messages

Maybe you are looking for