ID3 Tags Not displaying

Good Morning all,
I just imported a few hundered songs (MP3's converted from flacs) into iTunes and set up the artists, albums, genre, track #, etc. for each song. When I look at the songs in the music folder, these new song's tags do not display. I have several thousand songs and almost all of them have these tags displaying properly in the folder's columns. However, these songs do not. Is there a way to get the tags I entered in iTunes to show up for these songs in the folder without having to manually edit each one (there are hundereds)? I have never had this problem before. In the past whenever I edited a song in iTunes, the updated tags showed in my folder just fine. I am using windeows Vista. Any thoughts?

No one has any information on these?

Similar Messages

Div header tag - not displaying correctly

I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
The header contains three images; a logo, a banner (text), and a picture of a castle. These should display in a line.
When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc.
So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px). I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels). There is no padding/borders defined. Therefore the total should be well within the 960 width (?).
It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop). It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
If I set my container width much smaller, most of the screen will be green (the body) in big screens.
If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
Do I need to define the width of the header (as well as the container)?
Help! Thank you
http://hertfordcarnival.org.uk/dev/Index.html

Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean? One image in from fireworks, and then ... ? Thanks again
Date: Wed, 7 Dec 2011 01:37:10 -0700
From: [email protected]
To: [email protected]
Subject: Div header tag - not displaying correctly
    Re: Div header tag - not displaying correctly
    created by osgood_ in Dreamweaver - View the full discussion
Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not! Why not just use one big image then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Id3 tags notes or comments field

I have MP3 files that contain ID3 tags with Comments fields that contain information. When inserted into iTunes library these show up with a blank Notes field. I don't see a Comments field available, so I assume that Notes is the label given that same field by iTunes. However, the content is not displayed.
By the way, I access those fields by right clicking on the song, picking Get Info, then going to the Info tab.
Any clues as to how to get the Notes/Comments field imported or displayed correctly?

Notes? I don't have a Notes field -- I DO have a Comment field.
iTunes support for Comments fields is spotty. It does not support the short description field according to the ID3 specification; maybe it uses an older spec -- to be honest I'm not familiar will all of the ID3 specs, since there are several versions and they all have differences.

[SOLVED] ID3 tags not registering on MP3 Player

I just got a new MP3 player, and some of the ID3 tags that I've set on my music don't register. I have some other songs that were set on a Windows computer; these show up perfectly find. Every tag editor I've ever used has this problem.
What is a way to convert the ID3 tags into a format that my mp3 player (a coby MP826-8G) will be able to understand?
EDIT: Duh, I was using id3v2 instead of id3v1. Apparently most hardware music players don't read id3v2 yet.
Last edited by ProfessorProcrastinator (2014-05-17 23:54:20)

indeed, the tracks do have both v1.x and v2.x tags. Obviously, iTunes only accepts v1.1 tags. v2.x tags or mp3, who have both tags attached, will not be displayed in iTunes.
I have deleted the v2.x from the problem mp3-files using the "mp3tag" - tool. After re-importing the files into iTunes,
everything was fine.
Thanks,
Frankya

My ID3 tags not being recognized by iTunes 10.2.2

Can't quite find my unique problem on this board so hopefully someone can help me.
I have imported a lot of MP3 files into iTunes, successfully, which have v2.4 ID3 tags on them. I screwed up the song titles on one (Grateful Dead) show, and all songs came in titled '04'...
I deleted the files in iTunes (and asked iTunes to remove the files as well), fixed up the ID3 tags in the originals, and reimported. But, titles are still '04'!?
Since my music library is on my Linux box and I am mounting and importing from there, I thought maybe something was getting cached so I copied the whole album directory over to my iMac, but still I get the same '04' title for every song.
I also changed the Album attribute in the ID3 tags, but that is still also coming out the old (wrong) way.
It is as if iTunes has some sort of 'fingerprint' of the songs and refuses to recognize the ID3 tags.
This is on OS X 10.6.7 on iTunes 10.2.2, so I'm up to date on all software. And, I've imported A TON of shows like this without issue, it otherwise works just fine.
Anyone ever see this weird problem before?

Sorry, should have been clearer.
The first time I applied the ID3 tags my script for parsing the artist, album and track names from the directory name hierarchy and filenames (e.g. ~/Music/<artist>/<album>/<track number>-<filename>), my script had a bug and all ID3 'title' values were set to the month number of the concert (04 = April).
So, the first time I imported into iTunes, all tracks were titled '04'. I deleted those in iTunes, fixed my script, but now despite apparently having correct ID3 tags, all songs continue to be named '04'. I also changed the album value to, changing from 'Hartford 04262010' to 'Hartford Apr 26, 2010', but again the original value appears to be "sticky", and despite the apparently revised ID3 tag, the album name also is the same as the first time I imported (i.e. Hartford 04262010).
Like I said, it appears that iTunes is somehow caching the original values and not recognizing the new / revised ID3 tags.

Changing ID3 Tags - not updating?

Hi
I am updating Artist, Title information within iTunes - but for some reason the changes are not being reflected in the file ID3 tags?
some of my files are updating and others are not?
Any ideas?
Thanks in advance?

How are you examining the ID3 tags? Maybe whatever program you're using to look at them is caching the information, and not checking the tags when you look at the file a second time?

CFGrid tag not displaying background color

Hi, My application runs on CF v 4.5 and uses CFGrid tag to
display grids. When I run the same code on MX 7, the grid does not
display the pale yellow background for the grid as it does on 4.5.
Does anyone know how to fix this ?
Thanks, Jay M.

Hi CatJay
I looked at the code you sent and it has no attribute in
place to display any color in the background, so I am guessing that
maybe back in 4.5 there was only 1 colour by default?
Try adding bgcolor="#ffff00" to the cfgrid tag and see if
that changes the colour to yellow. (it should)
Once you get that to work, you can implement any colour you
want.

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

Tag not displayed

Hi all
I am running a script
BACKUP
INCREMENTAL LEVEL 1
FOR RECOVER OF COPY WITH TAG 'incr_update'
DATABASE;
RECOVER COPY OF DATABASE
WITH TAG 'incr_update';
After the backup is run. I issue a LIST BACKUPSET command.
RMAN> list backupset;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
10032 Full 7.55M DISK 00:00:01 29-JUN-09
BP Key: 10033 Status: AVAILABLE Compressed: NO Tag: TAG20090629T153750
Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp
Control File Included: Ckp SCN: 8281502719147 Ckp time: 29-JUN-09
SPFILE Included: Modification time: 23-JUN-09
This output does not show the tag 'incr_update'. How would I know which tag is used if the script does not display the correct tag.
Thanks in advance

It's a tag of copy, not a backupset made for recover.
try
list copy of database tag='incr_update';
However, this: 'Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp' it's a autobackup with only controlfile and spfile inside.
You can't specify tag for autobackup as far as I know, but You can search here:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#RCMRF107
cheers

ID3 Tags Not Being Recognized

Okay, so I have a problem and I am racking my brain trying to figure it out.
Itunes isn't recognizing some of my music's ID3 tags. Worst part is I used Itunes to convert every song I have to ID3 v 2.4, but there's still a handful that aren't been recognized. I used Media Monkey to aid in my tagging. For further pain listen to this. I also just updated from Itunes 6 or whatever to 7.4.1.1.1.1 or whatever the **** it's at now, and it went from about 7 albums to like 30 that itune's won't recognize the ID3 tags for.
For more help look at this image. Showing an example of how all my songs have and Artist, Album, and more set to them, but ITunes won't pick it up. Any idea how to fix this guys?
http://img149.imageshack.us/img149/5493/wtfituneshu6.jpg
Message was edited by: Taramoor

Hi guys. If your music is in MP3 format, try downloading this program: http://www.download.com/Mp3-Tag-Tools/3000-2141_4-10106717.html
Then click file > open directory. Find the folder that holds your music and click open. Make sure 'recurse subdirectories' is ticked so that it opens everything within the folder. This can take quite a while if you have a lot of music.
Once all your files have loaded, press Ctrl+A to select all of your music files and then press F7. This duplicates whatever is in your ID3V2.X tags onto the ID3V1.1 tags.
For iTunes to take notice of any tag changes you make in this program, the file either has to be played or re-uploaded into iTunes which can also take a while depending on how much music you have, but once you've done that, iTunes should start recognising your tags.
Hope this helps!

JavaDoc issue: @see tags not displaying properly

I am having a very odd issue that I cannot seem to figure out. I am trying to add the following lines to a comment on a specific method:
@see javax.mail.internet.MimeMessage#setSubject(java.lang.String)
@see java.util.Properties#getProperty(java.lang.String)
My problem is, when the html is generated...it shows
See also:
MimeMessage, Properties.getProperty(java.lang.String)
I have both the J2SE and J2EE documentation linked so that these are linked to the source api on sun's site. When I click on MimeMessage it does send me to the setSubject() method within the MimeMessage class. So why does it not show MimeMessage.setSubject(java.lang.String)? Instead it just shows the class name. And why does Properties.getProperty(java.lang.String) properly show on the documentation but the MimeMessage class does not show the specific method it is linking to?

Here is my set of @see tags for this method:
@see javax.mail.Session#getInstance(java.util.Properties, javax.mail.Authenticator)
@see javax.mail.internet.MimeMessage#setRecipients(javax.mail.Message.RecipientType, javax.mail.Address[])
@see javax.mail.internet.MimeMessage#setSentDate(java.util.Date)
@see javax.mail.internet.MimeMessage#setSubject(java.lang.String)
@see javax.mail.internet.MimeMessage#setHeader(java.lang.String, java.lang.String)
@see java.util.Properties#getProperty(java.lang.String)
@see java.util.Properties#list(java.io.PrintStream)
@see javax.mail.internet.MimeMessage#setFrom(javax.mail.Address)
@see java.io.StringWriter#write(java.lang.String)
@see javax.mail.internet.MimeBodyPart#setContent(java.lang.Object, java.lang.String)
@see javax.mail.Multipart#addBodyPart(javax.mail.BodyPart)
@see javax.mail.Transport#send(javax.mail.Message)And here is what it outputs on the documentation:
See Also:
Session, MimeMessage, MimeMessage, MimeMessage, MimeMessage, Properties.getProperty(java.lang.String), Properties.list(java.io.PrintStream), MimeMessage, StringWriter.write(java.lang.String), MimeBodyPart, Multipart, Transport
I am using an ant build to generate the documentation, here is the javadoc target:
<target name="javadoc" description="Generates javadoc">
     
     <script language='javascript' src='./WebContent/js/javadocs/javadocBackup.js'></script>
     <delete dir="${backupdoc.dir}" failonerror="false"/>
     <move file="${doc.dir}" tofile="${backupdoc.dir}"/>
     <delete dir="${doc.dir}" failonerror="false"/>
     <mkdir dir="${doc.dir}" />
     <javadoc destdir="${doc.dir}" access="package" use="true" notree="false" nonavbar="false"
          noindex="false" splitindex="true" author="true" version="true" nodeprecatedlist="false"
          packagenames="us.or.state.dhs.*" sourcepath="${src.dir}" doctitle="${project.name}"
          windowtitle="${project.name} - API reference." stylesheetfile="../documents/javadocs.css"
          bottom="<script src='../../WebContent/js/javadocs/javadocTopBanner.js'></script>">
          
          <link href="http://java.sun.com/j2ee/1.4/docs/api/"/>
          <link href="http://java.sun.com/j2se/1.4.2/docs/api"/>
     </javadoc>
</target>It is just really odd that the classes within the j2se docs are displaying correctly whereas the j2ee classes are not. The j2see classes link correctly and point to the correct methods when you click on them. They just aren't displaying correctly as you see above with the 4 MimeMessage classes and the Session, Transport, etc.
Any help is appreciated, thanks for responding! :)

SharePoint Social Newsfeed #tag not displaying

Hi All,
It has recently been noticed but on our Share Point 2013 Environment (October 2013 CU) that the Trending #tags feature under News-feed does not work, I have searched for an answer to no avail, I performed a search api query to the #tag and Search comes back
with no results, I am not sure if there is an isue with the search configuration as I tried t follow this blog post regarding the same issue but get stuck when he says configure search.
http://usesharepoint.blogspot.com/2013/06/taggings-been-quite-lately.html
The search content sources are working and all other content is being crawled except the trending #tags.
Edit: Ok it seems I have found the issue, we separated out crawls to content and Mysites, but in the MySites profile we only had sps3://<mysiteurl>. Issue is that we forgot http://<mysiteURL> as well.
Thanks :)

Hi,
Thanks for your sharing.
Cheers,
Jason
Jason Guo
TechNet Community Support

Netui Repeater tag not displaying any data

I have a very strange problem. I have a pageflow application that deals with collections and displays them using repeaters on jsp pages.
My problem is that there is one specific page that does not want to display the collection im populating in the pageflow.
I pass the data source as {pageFlow.collection} and it is acting as if the collection were empty, even though I have checked it not to be up to the line before the repeater declaration.
Has anyone faced a problem like this?
I need help.
J

Hi,
check the binding of your application. The form should show data right away and not only after the navigation buttons are pressed
Frank

ITunes doesn't read ID3 tags properly on import

hi all,
today I've added ID3 tags to all my mp3 files, so that they will look better in iTunes and my iPod. I have added information for "title", "artist", "album" and "track #" in ID3v1 and ID3v2.3.
Now, when I import these files to iTunes, the ID3 information is read only partly or not at all. This means, some tracks show all information, some only show title and artist, some do not show anything at all.
I edited all the ID3 tags with the same software, which makes it even more mysterious. The software was implemented by myself in C#. To edit the ID3 tags, I used the library UltraID3Lib. I don't think that something is wrong with my software because the ID3 tags are displayed properly in Winamp without any problems.
I have also already tried the option in iTunes to convert the ID3 tags, but this also only yields strange results: If I select "none" as ID3 version, iTunes obviously imports the information from the ID3v1 tags, but it deletes the ID3v2 tag at the same time, so that titles and albums are cut down to 30 characters. If I choose other options, nothing changes.
Does anybody have an idea how to solve this problem? Or can someone maybe explain this "convert ID3 tag" option? It doesn't really make sense to me...
Many thanks in advance!
gehho.

As far as I know (and it may not be very far), iTunes does use standard ID3 tags for most things. The XML file stores info on ratings, playlists, playcounts and other iTunes specific information for use by other applicaitons. iTunes itself doesn't use the XML file but rather the iTunes Library.itl file.
It's possilble to do multiple file tag editing in iTunes for things like artist, album, year, etc. I would say, go with whatever works for you. It just seemed as if what you were doing wasn't working. Perhaps the other suggestion will solve you're problem.
Best of luck.

MP3 song information not retained after iTunes 7.0 - ID3 tags at fault?

I'm having some strange problems with track information in iTunes. I first noticed it when I tried to copy some mp3's from my Mac to my mobile phone: certain tracks did not retain the song information, like artist, album etc., while others did.
A similar problem has been discussed in this post:
http://discussions.apple.com/thread.jspa?messageID=3698498
However, my problem seems to be a little bit more specific.
If I look at the music in my library in iTunes, all the track information is there. However, for MP3's encoded after 16th October last year, the "Imported With" field, using Get Info, is shown as "Unknown". Before this date, it is shown as "iTunes v7.0". For all MP3's the ID3 version is v2.2.
I believe that I must have upgraded to iTunes 7.0.1 around this time, since I have a number of Apple Lossless audio files which have also been imported and don't show this problem.
The main problem is with the file ID3 tag information (I think). If I select one of the problem tracks, find the original file, open it up in Quicktime and "Get Info", no track/album/artist/composer information is displayed. This is NOT true for 1) MP3's encoded before 16th October 2006 and 2) Apple Lossless files encoded at any time.
In other words, the track information for songs encoded with iTunes 7.0.1 and later is either encoded in a way that no other application can read, OR is only being stored in the iTunes playlist, NOT the file itself. I can see all the track information for these problem files on my iPod, but NOT my mobile phone (where I have to manually copy them over), even if I drag and drop them directly from iTunes.
I have this problem with Quicktime, my mobile phone music player and RealPlayer, so I'm assuming it's "system wide". It even occurs if I copy a problem file out of my music folder and onto the the Desktop, then manually add the track to iTunes: all the song information has disappeared.
I have all my music stored on an external hard disk - 160GB Freecom ToughDrive formatted as HFS+. Previously it was stored on an external disk formatted as FAT32, but copying the files over to the new disk didn't change the problem.
I considered using the "convert ID3 tags" option to see if it would make a difference, but both the good and bad files are listed as using v2.2. I also don't understand enough about them to feel confident converting them to something different - perhaps to v2.3 or v2.4 - just to see if it makes a difference.
Any information on how to "recover" the missing information (for anything other than iTunes) would be greatly appreciated!
MacBook Pro 17" 2.16 GHz 2GB RAM Mac OS X (10.4.9) iTunes 7.1.1

Okay, some more information as I try and track down the source of the problem.
By using an id3 tag editing program - ID3 Editor - I was able to view the song information for each track, even though all the other music players I had tried would not show it. If I then chose to modify and update the ID3 information, this would somehow modify the tags in such a way that they become readable in all other programs.
I tried using the "Convert ID3" tags option in iTunes, just on a whim, but without any success. Saving the song information in ID3 Editor doesn't change the version of the ID3 tag - it's still listed as v2.2 in iTunes - but it DOES make it readable in other programs. I also tried the various text conversion options, again without any success.
This looks to me like a bug in iTunes. While its possible for me to get around it, in an extremely long winded way, I still can't understand why iTunes would be writing ID3 information that other Apple programs cannot read.
Any suggestions? Should I be posting this question in a different forum perhaps?

ID3 Tags Not displaying

Similar Messages

Maybe you are looking for