IDCS3 error message "Cannot add data to unknown document"

I am using a Mac and last week I opened an ID document from my flash drive, worked on it, saved it back to my flash drive and reopened it just to make sure it saved right. Now when I try to open it, it says "Cannot add data to unknown document". All the permissions look fine. Is it a file problem? Is there anything I can do to recover it?

That is a very dangerous workflow. NEVER work off of removable media.
Always copy to your harddrive and work there.
That said, try copying the file to your harddrive now and working on that.
Bob

Similar Messages

Cannot add data to unknown document?

Hi there,
There are several computers working on a server and two other employees were working on the same indesign document at the same time, causing both of them to suddenly crash and then the file became corrupted. When I try and open the document I get the error message 'cannot add data to unknown document'. I still get the same message even when trying to open the file from my desktop. I am using CS5.5 and am on an imac....
I have tried to find a solution to this in the threads, but so far no luck! Have also tried to call Adobe but they were no help . Any assistance would be greatly appreciated.
Thanks
E.Coe

First off, two people shouldn't have the ability to work on the same file at the same time. That was a bug in the initial release of CS5 or CS5.5 (not sure which) but it was fixed in the first patch. If you haven't updated to 7.5.3 you need to do that to prevent future problems and take advantage of other bug fixes.
As far as your file, it doesn't sound all that hopeful. Try opening as a copy. If that doesn't work you may have to rebuild, or if more cost effective, use the Markzware recovery service: Bad InDesign or Quark File Recovery Submission Form

Error - Cannot add data to "unknown document"

I have had this happen to me twice in two days.
The file which I save constantly as I'm working on, comes up with this error and I can't open the .indd file.
I don't have any network, new external drive or installed any new updates that might affect things.
What's happening??
I appreciate any help, and I am not too computer savvy...
Thanks

If you rebuilt from scratch and it's working, there's probably no need to export to IDML. This kind of thing can happen with files from previous versions of ID that you open and edit in a new version. If you have to update legacy files I recommend exporting them to IDML (or .inx if the version supports it) from the original version, then opening that for conversion, and don't overwrite the old version -- you may find you need it for backup later.

Elements 9 Error Message Cannot Up Date Intel Display Driver Why?

Running Windows 7 64 Bits
Today I opened Adobe Elements 9 to find another problem out of the blue why things change I haven't a clue! Error message pops up saying the following:
Update Adode Display Driver detail : Intel (R) HD Graphic 2000-3.00-Build 9.17.10.29.32.
Also maybe as a result of not having this update the Timeline and the video in the viewing screen will not keep pace. In fact the video viewing window doesn't move at all unless you click on a particular scene now only shows that scene no rolling video. Yesterday it wasn't a problem why it changed I don't know. I was advised by ATR I set my updates to manual so there has not been any updates so nothing should of change right?
Can you send me the link that updates that particualr driver? I went to my computer manufacture web site and down loaded the latest updates for my system then I restarted my computer still the same Adobe error message same problem. Then I went to Intel website updated the latest driver updates restarted my computer still got the same adobe error message and still have the same viewing screen problem? Help Please? I'm lost and I'm a rookie so speak plan English please no technical terms please? Thank you

waterworshipper
Many many apologizes. In the screenshot in post 5 I circled Program Files instead of Program Data although I wrote Program Data in the written instruction elsewhere. Please watch this post for the correction.
Very sorry. You did great. I messed up.
Correction
(Since I cannot get back into Post 5 to edit it, I going through the process of getting Post 5 deleted. What follows here is the replacement.)
waterworshipper
You can do it. Let us go step by step
Start Button
Click Computer
Double Click Local Disk C
You should see a list similar to the following:
Double click "Program Data" circled above.
When you do, you will get another list showing some folders etc. Find the folder named Adobe and click on it.
(At that point, make sure to scroll all the way to the top area to make sure that you are not missing Adobe.)
When you do, you will get another line up of folders. Find specifically the folder named Premiere Elements and double click that.
When you do, you will get another line up of folders. Find specifically the folder named 9.0 and double click that.
When you do, you should see the following:
As the screenshot immediately above shows, right click the BadDrivers.txt file and select Delete.
At that point, you close out of there.
Reopen Premiere Elements 9.0/9.0.1 and see if the video card error and other problems are gone.
Please give this another look. If you run into difficulties following my instructions, then please indicate where and I will rewrite them.
Thanks.
ATR
If you have Windows 7 64 bit computer, the location for the BadDrivers.txt file should be in the corrected information just posted.
Again sorry for the detour.

Error Message: cannot be imported an unknown error occured (-50)

I get this message when I try to import audio and video files to the library. "cannot be imported an unknown error occured (-50)" I've already tried disabling anti-virus software and deleted any spyware on the system. I'm running windows xp with service pack 2.
I would like help fixing the problem.
THANK YOU

hmmmmmm. this can sometimes be caused by a damaged itunes library file in a particular XP user account.
What are the iTunes Library files?
let's try an experiment aimed at trying to work out if that's what is going on in your case. (this isn't a cure, it's more of a diagnostic technique.)
let's try an experiment.
quit itunes. head into your user accounts control panel and create a new user account with full administrative rights. (there's help documentation on how to do that at the left of the control panel screen.) while you're in that control panel, switch off "fast user switching" in your logging-on preferences.
now log out of the old account and log into the new account. launch itunes.
the library in there will be blank, because there's a different set of library files in that account. try importing a CD in that account. does it go through okay, or do you get the (-50) there too?

Dimbuild causes network error 10054 "cannot send data"

Can anyone help with this? I have an ASO app that I run dimbuilds on every month. Every month I get the same error message when the dimbuild runs: Error 1042012 - Network Error [10054]: Cannot send Data. If I make an exact copy of the app and run the dimbuild on the copy, I get no errors and the dimbuild works fine. But when I run it on the original app, I always get the error message. Yet this month's app is a copy that the dimbuild worked on last month. Does anyone out there know why this keeps happening? Any suggestions deeply appreciated. Thanks. 

Hi Anaguiu, I would clear the database and build dimensions using dimbuild rulewith no data in database and then load data using data load rule. Additionally I found some information at http://dev.hyperion.com/techdocs/essbase/essbase_71/Docs/errmsgs/ernetwrk.htm#1042012 Quote "1042012 Network error message: Cannot Send Data Possible Problems Analytic Services cannot send data over the network using namedpipes. Possible Solutions Increase the values for NETDELAY and NETRETRYCOUNT. Check the index cache size, data cache size, and data block size tomake sure that they are within the recommended ranges. " ------------------ [email protected]

Everytime I try to sync my ipod touch it comes up with the following message 'cannot be synced an unknown error accoued(13019). Does anyone know what this mean and how I can put it right

Everytime I try to sync my Ipod touch I et the following message 'cannot be synced An unknown error occured (13019). Can anyone help

Try here:
iTunes: Error 13019 during sync

Applied an update to an app that records blood pressure. Am unable to retr ieve previously stored info. When following directions in update I cannot "add" data to import because message states data are stored elsewhere and I cannot find where. Help?

Applied an update to an app that records blood pressure. Am unable to retrieve previously stored info. When following directions in update, I cannot "add" data to import because message states data are stored elsewhere, and I cannot find where. Help?

You'll have to contact the app developer for help with this.

Cannot add data

I received the following error message when I tried to open a CS3 Indesign document that I had worked on last week. The document has some images in it and uses a lot of different script types.
i cannot add data "unknown document"
I am working on an IMAC OS10.5.6

You'll be better off asking this in the Mac forum than here in Windows, but it sounds like the file has been damaged. Try opening it as a copy.

Solution Import Failure Message: Cannot add a Root Component 'GUID' of type 29 because it is not in the target system

Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..

I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component

Getting error message Cannot Resolve Symbol when trying to compile a class

Hello All -
I am getting an error message cannot resolve symbol while trying to compile a java class that calls another java class in the same package. The called class compiles fine, but the calling class generates
the following error message:
D:\Apache Tomcat 4.0\webapps\examples\WEB-INF\classes\cal>javac
ConnectionPool.java
ConnectionPool.java:158: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
private void addConnection(PooledConnection value) {
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
The code is listed as follows for PooledConnection.java (it compiles fine)
package cal;
import java.sql.*;
public class PooledConnection {
// Real JDBC Connection
private Connection connection = null;
// boolean flag used to determine if connection is in use
private boolean inuse = false;
// Constructor that takes the passed in JDBC Connection
// and stores it in the connection attribute.
public PooledConnection(Connection value) {
if ( value != null ) {
connection = value;
// Returns a reference to the JDBC Connection
public Connection getConnection() {
// get the JDBC Connection
return connection;
// Set the status of the PooledConnection.
public void setInUse(boolean value) {
inuse = value;
// Returns the current status of the PooledConnection.
public boolean inUse() {
return inuse;
// Close the real JDBC Connection
public void close() {
try {
connection.close();
catch (SQLException sqle) {
System.err.println(sqle.getMessage());
Now the code for ConnectionPool.java class that gives the cannot
resolve symbol error
package cal;
import java.sql.*;
import java.util.*;
public class ConnectionPool {
// JDBC Driver Name
private String driver = null;
// URL of database
private String url = null;
// Initial number of connections.
private int size = 0;
// Username
private String username = new String("");
// Password
private String password = new String("");
// Vector of JDBC Connections
private Vector pool = null;
public ConnectionPool() {
// Set the value of the JDBC Driver
public void setDriver(String value) {
if ( value != null ) {
driver = value;
// Get the value of the JDBC Driver
public String getDriver() {
return driver;
// Set the URL Pointing to the Datasource
public void setURL(String value ) {
if ( value != null ) {
url = value;
// Get the URL Pointing to the Datasource
public String getURL() {
return url;
// Set the initial number of connections
public void setSize(int value) {
if ( value > 1 ) {
size = value;
// Get the initial number of connections
public int getSize() {
return size;
// Set the username
public void setUsername(String value) {
if ( value != null ) {
username = value;
// Get the username
public String getUserName() {
return username;
// Set the password
public void setPassword(String value) {
if ( value != null ) {
password = value;
// Get the password
public String getPassword() {
return password;
// Creates and returns a connection
private Connection createConnection() throws Exception {
Connection con = null;
// Create a Connection
con = DriverManager.getConnection(url,
username, password);
return con;
// Initialize the pool
public synchronized void initializePool() throws Exception {
// Check our initial values
if ( driver == null ) {
throw new Exception("No Driver Name Specified!");
if ( url == null ) {
throw new Exception("No URL Specified!");
if ( size < 1 ) {
throw new Exception("Pool size is less than 1!");
// Create the Connections
try {
// Load the Driver class file
Class.forName(driver);
// Create Connections based on the size member
for ( int x = 0; x < size; x++ ) {
Connection con = createConnection();
if ( con != null ) {
// Create a PooledConnection to encapsulate the
// real JDBC Connection
PooledConnection pcon = new PooledConnection(con);
// Add the Connection to the pool.
addConnection(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// Adds the PooledConnection to the pool
private void addConnection(PooledConnection value) {
// If the pool is null, create a new vector
// with the initial size of "size"
if ( pool == null ) {
pool = new Vector(size);
// Add the PooledConnection Object to the vector
pool.addElement(value);
public synchronized void releaseConnection(Connection con) {
// find the PooledConnection Object
for ( int x = 0; x < pool.size(); x++ ) {
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// Check for correct Connection
if ( pcon.getConnection() == con ) {
System.err.println("Releasing Connection " + x);
// Set its inuse attribute to false, which
// releases it for use
pcon.setInUse(false);
break;
// Find an available connection
public synchronized Connection getConnection()
throws Exception {
PooledConnection pcon = null;
// find a connection not in use
for ( int x = 0; x < pool.size(); x++ ) {
pcon = (PooledConnection)pool.elementAt(x);
// Check to see if the Connection is in use
if ( pcon.inUse() == false ) {
// Mark it as in use
pcon.setInUse(true);
// return the JDBC Connection stored in the
// PooledConnection object
return pcon.getConnection();
// Could not find a free connection,
// create and add a new one
try {
// Create a new JDBC Connection
Connection con = createConnection();
// Create a new PooledConnection, passing it the JDBC
// Connection
pcon = new PooledConnection(con);
// Mark the connection as in use
pcon.setInUse(true);
// Add the new PooledConnection object to the pool
pool.addElement(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// return the new Connection
return pcon.getConnection();
// When shutting down the pool, you need to first empty it.
public synchronized void emptyPool() {
// Iterate over the entire pool closing the
// JDBC Connections.
for ( int x = 0; x < pool.size(); x++ ) {
System.err.println("Closing JDBC Connection " + x);
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// If the PooledConnection is not in use, close it
if ( pcon.inUse() == false ) {
pcon.close();
else {
// If it is still in use, sleep for 30 seconds and
// force close.
try {
java.lang.Thread.sleep(30000);
pcon.close();
catch (InterruptedException ie) {
System.err.println(ie.getMessage());
I am using Sun JDK Version 1.3.0_02" and Apache/Tomcat 4.0. Both the calling and the called class are in the same directory.
Any help would be greatly appreciated.
tnx..
addi

Is ConnectionPool in this "cal" package as well as PooledConnection? From the directory you are compiling from it appears that it is. If it is, then you are compiling it incorrectly. To compile ConnectionPool (and PooledConnection similarly), you must change the current directory to the one that contains cal and type
javac cal/ConnectionPool.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

InfoPackage error message "Subsequent update (requests) : Status unknown "

After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
Luda

Hi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa.

TS3299 Itunes-I receive error message cannot locate CD burner or software.

I have a older laptop Windows XP that worked fine in burning CD's from ITunes Playlist.
After latest Itunes update I have problems receive error message "Cannot Locate CD burner or software"
I have tried several things restarting computer-updating computer any other suggestions.

Ran the test two more times here is the message
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Dell Inc. Latitude E5500
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B5100C7A4FD8
Current user is an administrator.
The current local date and time is 2013-03-01 07:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Mobile Intel(R) 4 Series Express Chipset Family
Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Dell Inc. Latitude E5500
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B5100C7A4FD8
Current user is an administrator.
The current local date and time is 2013-03-01 07:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Mobile Intel(R) 4 Series Express Chipset Family
Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

IDCS3 error message "Cannot add data to unknown document"

Similar Messages

Maybe you are looking for