IDCS3 Mac and Windows SDK Upgrade question

Hello everyone:
Well, my usually conservative Production Support Division upgraded CS3 to 5.0.3 without telling anyone and now its time for the programmers to play catchup. What I need to know (it does not mention it one way or another in the readme) is, do I need to upgrade to 5.0.2 before upgrading to 5.0.3 or is 5.0.3 cumulative.
Thanks for any help you can give me.
R,
John

Jim:
I was actually talking about both. Further research lead me to believe that it was safe to upgrade the SDK from 5.0.0 to 5.0.3 in one fell swoop without worrying about the intervening versions. So I did, and I haven't had a problem yet with compiling. WRT the debug patches, however, I couldn't wait for a definitive answer, and I found no comfort in the documentation that one could make the jump from 5.0.0 to 5.0.3, so I went ahead and downloaded all the patches and ran them, one after another. It took a bit more time, but now I am sure that the final product is safe.
WRT the patches, one needs to be careful, because in its wisdom, when expanding the compressed packages, Adobe chooses to put the expanded contents in folders that are named exactly the same. It caused a bit of confusion until I figured out what was going on.
HTH,
John

Similar Messages

I w system from OSX 10.5.8 to at least 10.6. Also my hard drive is partitioned for Mac and Windows (which I would like to remove). How should I upgrade?

I want to buy an Iphone 5 but need to upgrade my operating system from OSX 10.5.8 to at least 10.6.0. Also my hard drive is partitioned with Mac and Windows. How can I upgrade?

1. Click here and buy a Mac OS X 10.6 DVD.
2. Use the Boot Camp Assistant in the /Applications/Utilities/ folder to return the drive to a single partition setup.
(83003)

I have elements 11 on my mac and want to upgrade to elements 13 but it seems that the elements 13 upgrade is only for windows. Is there a mac edition to this upgrade?

I have elements 11 on my mac and want to upgrade to elements 13 but it seems that the elements 13 upgrade is only for windows. Is there a mac edition to this upgrade?

Yes, certainly, but if you're in the US I would just download the trial and use that for now, since there will be plenty of deals on the full version come the start of the holiday shopping season, especially at places like amazon and big box stores. Usually for much less than adobe's upgrade price.

Best external hard drive format for use with mac and windows?

This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
Anyways to the question(s)
This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
What is the difference between fat 32 and exfat?
A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
https://discussions.apple.com/docs/DOC-3044
If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
And a silly question, Can you dual format a hard drive?
Note: This format is for an external hard drive.

I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
I really do still need this information and I need to back up my drive before I can take the computer in for service.

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

VPN -- different behavior between Mac and Windows XP clients.

Hi,
Background:
I have a Mini server serving L2TP IPSEC vpn with both Mac and Windows (all XP, so far) clients.
The mini sits behind a Netopia router/firewall/NAT box that port forwards L2TP traffic to the mini.
The mini has a public but unrouted address (unrouted in the public Internet, that is.) The same Netopia serves as the router for outgoing public connections. DNS is served by other servers.
The VPN clients are distributed addresses from the unrouted public address space.
Client <-> NAT <-> Public Cloud <-> NAT <-> Private (with public addresses) <-> Mini (VPN)
Mac clients work happily, accessing internal and external hosts.
The XP clients have a registry value set to allow NAT traversal:
under HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\IPSec, AssumeUDPEncapsulationContextOnSendRule is set to 2 to allow dual Nat traversal.
The XP clients happily access internal hosts, but hang accessing some, but not all external hosts.
For example, most Google services are quickly displayed, whereas www.comcast.net or www.llbean.net hang. It appears to be more frequent accessing third-party hosts while processing the initial page. Some Google web services, e.g. some Google Map plugins do eventually hang.
An XP host internal to the network configured with the above registry key set to 0 (No NAT traversal)
exhibits the same behavior when using a VPN connection
Public Cloud <-> NAT <-> Private (with public addresses) <-> Mini (VPN) <-> Pvt. <-> Client
Same host without VPN works fine.
Clearing the XP checkbox that routes all traffic to the remote (VPN) router makes external hosts work
as you would expect.
So my questions are:
a) What's XP doing?
b) Can it be fixed? (besides routing public traffic away from the VPN.)
Thanks Jonathan
p.s. MrHoffman, I almost asked this in the HP Forum as well, till I noticed you were here. (Assuming you are Hoff.)

Hi soccerdude21490-
+Is this possible?+
Theoretically yes. However, it would be up to the school to allow you access through their network.
The first step would be to contact the school's IT department and ask them if they will allow such a connection, and if so, could they please provide you with the settings (ip address etc.).
Luck-
-DP

Photoshopversion for mac and windows when switching?

Hi,
I have used now the photoshop trial version for windows for windows for a while and would like to buy the full version. However I will switch to a mac in December or January and would really appreciate If I would be able to start out with photoshop already now on my windows pc so that I don't have to wait with purchasing photoshop until I have the mac.
If I buy a photoshop license, will I get a version for both platforms or how does it generally work if switching platforms? I am also using Lightroom 4 and when I bought this as box it came with both a mac and windows version but I noticed that for photoshop I have to choose in the store.
Would be nice if you could help me with this.
Thanks in advance and regards,
Tom

Lightroom is multi-platform. It is licensed for Mac and/or Windows and you can install it on both since you can activate it on up to 2 computers.
Traditionally licensed versions of Photoshop and other apps are single platform licenses: Mac only or Windows only but you also have up to 2 activations. Mac/Mac or Win/Win.
Creative Cloud versions of Adobe Suites and apps (e.g. Photoshop) are all multi-platform licenses: Mac and/or Windows - so you can activate them on Win/Win or Mac/Mac or Win/Mac. That may work best in your situation purely from a licensing perspective but you'll be locked in to a monthly fee.
You can cross-grade from Windows to Mac but that usually involves an upgrade at the same time (e.g. CS5.5 Windows to CS6 Mac). Check with Adobe Sales for further options.

Formatting external hard drive for MAC and Windows

I have an external hard drive that I would like to make compatible with BOTH Mac and Windows. I don't want to split it but is there any way that I can make it compatible to where I can use it back and forth between both? I have classes and use Photoshop on both systems and need to be able to read and write to the hard drive from each system. Please let me know if this is possible and how? Thanks

I have a 500GB external HDD which I had to format o Fat32 a while ago. I don't remember exactly how I did it, but I remember it was a pain in the *** and took forever (I was under Windows XP).
So short answer to your question is yes. It is possible and as the above person said, you need to format to Fat32. Long answer is it will take some time and effort. Here are a few links to help you get started:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
http://macosx.com/forums/mac-os-x-system-mac-software/270038-format-new-hard-dis k-into-fat32.html
http://en.kioskea.net/faq/sujet-676-formatting-your-drive-with-fat32
I haven't tried any of these (I believe I formatted mine downloading a third party app), but you might be lucky. Good luck.

Formatting for mac and windows

Is it possible to have mi iPod formatted for both mac and windows? If so, how can I do it?
Thanks

Now you can be 100% sure, StarDeb!
As another of the old windows guys, I had the same question when I made the change. Windows format works just swimmingly with Macintosh computers. Can't say the same for the other way around.
In fact, the iPod I had at the time, a 15 GB 3G (the one with the red buttons, and still the best looking of the lot), is still formatted for windows even though I have not had a Windows computer for several years now.
So enjoy the Powerbook (just bought a new to me G4 iBook, myself) without fear that the iPod will be a stumbling iBlock.

Version 22 file input box missing, Mac AND Windows.

Since upgrading to version 22 of Firefox in Mac AND Windows the text entry box for selecting files to upload has disappeared, and Firefox no longer shows the full path of the uploaded file...this is within Zencart, and again this happens in both the Mac and Windows versions of Firefox22. See the image at:
http://img.photobucket.com/albums/0803/Mikefellh/pers/Firefox22Issue.jpg

hello mikefellh, this has been an intentional change that has landed in firefox 22. for details see the meta [https://bugzilla.mozilla.org/show_bug.cgi?id=838675 bug #838675] (please don't post in bug reports).

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

This is not really a Numbers question. I will provide an answer but suggest you make the question relavent for the forum where you post.
1) Open the PDF in Preview
2) select the menu item "View > Thumbnails"
3) select the page you wnt to share
4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
5) select the menu item "File > New From Clipboard"
6) save as a new name
7) share the new file

Sharing files between mac and windows

Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

Lenovo Yoga 3 14 recovery and Windows 10 upgrade

Hi,
I have a few questions regarding Lenovo Yoga 3 14 recovery and Windows 10 upgrade (should be generic questions that apply to other models as well):
1# Will the Windows 10 update and activation change in any way the Win8.1 OEM serial key stored in BIOS? Is there any chance that any software changes that BIOS OEM key (like malware or similar)?
2# After updating to Windows 10, if I put the USB recovery pen drive (created in Win8.1), will I be able to restore the Win8.1 version (factory restore), and successfully activate it and use it without issues?
3# On a clean drive (without any partitions, like for instance if I buy a new one), if I use the same USB recovery pen drive (created in Win8.1) to do a factory reset, will it re-create all partitions, including the recovery partition one?
Thanks

1) Run the Win 10 installation and choose "Upgrade Windows" option. Windows 10 will be installed and it will be activated.
The chance of any software changing the OEM key is insignificant.
2) Yes, you can recover Win 8.1 successfully. No need to activate it, it will be auto-activated.
3) I dont have experience with this but reading around the forum I have seen that using a recovery drive on a new HDD may not install windows and re-create partitions.
The recovery partition is the hardest to re-create on a new HDD, even you are able to re-create it the NOVO button usually doesnt work.
Let me know if I answered your questions. Thanks.

IDCS3 Mac and Windows SDK Upgrade question

Similar Messages

Maybe you are looking for