IDCS3 Print Booklet - Image across first and last page

Does anyone know how I could place an image to be wrapped around the cover of a booklet? No problem on inside pages because they show as two page spreads but the first and last pages don't display as a two page spread.

Place it on the cover and stretch it out across what would be the back
cover if it were there.
Copy to clipboard and scroll to the last page. Edit>copy in place. Crop
to fit on back cover and front cover.
Bob

Similar Messages

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

Problem regarding printing in first and last page of a form

I need to print a some text only in the first page and last page. I have defined a window to print this text. The number of pages that will be created is decided on run time. Can some body please help regarding this issue. I have tried to use SFSY-FORMPAGES to calculate total number of pages in the begining but it does not work
Edited by: subhajit bhadra on Feb 20, 2009 7:44 AM

Hi Badhra,
You can use conditions for that window or text element.
in conditions, tick 'only befor main window' forr header
and 'ONly after main window ' for footer.
Sunil

Problems with envelope-printing in Address Book: First and Last names

New entries I make in Address Book are printing incorrectly, with Last name then First name. Most of my older entries print correctly as First name then Last name (though oddly I have a small batch of entries I imported ages ago which have always exhibited the same transposition problem).
I have prefs set to display entries by Last name. Problem entries WILL print correctly if I change this to 'display by First name'. (older entries print correctly regardless of 'display by..' pref).
I'm having the same problem if I create a new account, which made me suspect the app was corrupted, but not helped by deleting app and re-installing from Tiger DVD then running combo updater.

Thank you for the suggestion.
However, it doesn't make sense for the LIST display-order to swap the first-and-last names on an ENVELOPE. Secondly, most of my entries DO print correctly: it's only NEW entries that transpose the first and last names.

How to report header and footers on first and last page only

Hi
We are trying to create a report that has a one data header on the first page and another header on subsequent pages then the data body then a footer section on the last page only. If we only have one page of data it works fine but when we move to multiple pages the data body section does not expand to fill the gap and we are left with second header but then a gap before the data.
We have tried to use anchors but are realy stuck. Any help would be greatly appreciated
Ian

Something like:
LOOP AT t_output1.
WRITE:/1 vline,
2 t_output1-ktokd,
17 vline,
18 t_output1-kunnr,
29 vline,
30 t_output1-name1,
70 vline,
71 t_output1-katr1,
87 vline,
88 t_output1-land1,
96 vline,
97 t_output1-vkorg,
107 vline,
108 t_output1-kvgr1,
118 vline,
* DV4K934131-Start.
* 119 T_OUTPUT1-TTEXT,
120 t_output1-v_text,
* 150 VLINE.
255 vline.
* DV4K934131-End.
ENDLOOP.
WRITE:/1 sy-uline(255).
TOP-OF-PAGE.
IF p_upda = 'X'.
    v_linsz = 255.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 vline,
    2 text-h01, "'Sold to/Ship to'
    17 vline,
    18 text-h02, "'Customer#'
    29 vline,
    30 text-h03, "'Customer Name'
    70 vline,
    71 text-h04, "'Customer Status'
    87 vline,
    88 text-h05, "'Country'
    96 vline,
    97 text-h06, "'Sales Org.'
    107 vline,
    108 text-h07, "'EST Status',
    118 vline,
    119 text-h08, "'Change History',
* 150 VLINE.
    255 vline.
    FORMAT RESET.
    WRITE:/1 sy-uline(255).
ENDIF.
Rob

Looking to create first and last page for slideshow

Hi,
I want to create a first page that has "Happy 40th Wedding Anniversary to Bill and Judy". I also want to create a trailer page with a message typed from their children. How can I best create these two pages. I will take the photo album, create a slideshow from it and then export it to idvd.
Thanks for help. Are there templates I can use/look at for the imac where I can create these pages?
-Rick

I will use word processor, print to pdf and then import to iphoto.

First and last pages on the wrong side?

Hi
I've gone on to inDesign CS6 for the first time in a month or so and for some bizarre reason my pages are backwards..
as you can see in the image page '1' is on the right hand side, and should be on the left. anyone got any ideas - sorry if its something simple i'm only a beginner! thanks a lot!
Joe

Grab a book and open it. That should verify that what you see is correct.
Bob

IPhoto 11 Book 1st and last page errors

When previewing my completed book, the 1st and last page have white lines going through them.
How can i fix this so I can buy it.
Thanks

Boot into Safe Mode and preview the book. If the first and last page photos are OK order the book from the Safe Mode. It's a problem others are having and worked around it with the Safe Mode boot.
Be sure to report it to Apple via http://www.apple.com/feedback/iphoto.html.
OT

How can I display the first and last name using a paramater as employee ID?

Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
Z

Hi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay

Detect first and last spark list items

Hi,
I have a custom item renderer with a background image for each item in a list. the thing is I'm trying to have a different background for the first and last items (curved respectively) and I'm not sure how to do that.
Any help will be appreciated.

If you are scrolling, will you change which ones have the different
background?
If not, look at ButtonBar. It is based on ListBase and assigns different
skins to the first and last renderer.

Getting first and last dates of a month

Jello all,
I am really sorry I am posting this topic here, not actually owned by this forum but in fundamental forum i am not getting it attended.
I am generating monthly, quartelry and yearly reports, for which I need to get first and last dates of a given Month taking in to account leap year. I searched the API and docs for Calendar class. I could not find any useful methods / fields. I wonder this being a very common requirement, how SUN has not provided these essential features. I still feel, it must be some where. Please help me and reply. Also if you came across any other forum for util package, let me know.
Thanks
Varde

Jello all,
I am really sorry I am posting this topic here, not
actually owned by this forum but in fundamental forum
i am not getting it attended.
Yes, and I can see you are a very patient person, waiting a whole half hour for a response before cross posting other boards.
Question answered.
http://forum.java.sun.com/thread.jsp?thread=514908&forum=31&message=2451646

Swapping the first and last characters in a column

Hi,
Fairly new to T-SQL and i want to swap the first and last characters in a column.
Thanks
Umar Javed

Likewise i have also tried your suggestion and i still seem to be getting errors:
IF (@TYPE = 'SCRAMBLE')
BEGIN
DECLARE @SQLCOMMAND VARCHAR(2000)
SET @SQLCOMMAND = 'UPDATE ' + @TABLENAME + ' SET ' + @VALUE +
STUFF(STUFF(@VALUE,1,1,RIGHT(@VALUE,1)),LEN(@VALUE),1,LEFT(@VALUE,1))
EXECUTE(@SQLCOMMAND)
END
Umar Javed
Please post the errors.
EDIT: Actually looking at your code this will bring errors:
IF (@TYPE = 'SCRAMBLE')
BEGIN
DECLARE @SQLCOMMAND VARCHAR(2000)
SET @SQLCOMMAND = 'UPDATE ' + @TABLENAME + ' SET ' + @VALUE + ' = STUFF(STUFF('+@VALUE+',1,1,RIGHT('+@VALUE+',1)),LEN('+@VALUE+'),1,LEFT('+@VALUE+',1))'
PRINT @SQLCOMMAND
EXECUTE(@SQLCOMMAND)
END
I've also added a print command so it will show you what the code looks like upon concatenation. It's much easier to debug this way.

Can only see first and last frame of clip in the timeline HELP PLEASE

Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
Thank you for answering
Werner

As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
Good luck and happy editing,
Hunt

How to find first and last day of last month?.

Hello,
I am using Crystal Report XI.
Reports will be generated on first of every month for
previous month. I want to find start and end date of previous month
dynamic.
For august, Start date is July 1st and End date July 31st.
For September, start date is Aug 1st and Aug 31st.
How can i get first of previous month as start date and last
day of the previous month as end date?.
Same kind of thing I want to do for future report ..find next
month start date and end date.
Thanks

Adomacro,
you could do a function, like this
<cffunction name="getReportdates" returntype="struct"
hint="Given an arbitrary month and year, the function returns a
structure containing the first and last day of the previous
month">

<cfargument name="mnth" type="string" required="No"
default="#monthAsString(month(now()))#">
<cfargument name="yr" type="numeric" required="No"
default="#year(now())#">
<cfset firstDayOfGivenMonth = parseDateTime("1 " &
arguments.mnth & " #arguments.yr#")>
<cfset lastDayOfPreviousMonth =
dateAdd("d",-1,firstDayOfGivenMonth)>
<cfset numberOfDaysOfPreviousMonth =
daysInMonth(lastDayOfPreviousMonth)>
<cfset firstDayOfPreviousMonth =
dateAdd("d",-#numberOfDaysOfPreviousMonth#,firstDayOfGivenMonth)>
<cfset reportDates = structNew()>
<cfset reportDates.firstDayOfPreviousMonth =
firstDayOfPreviousMonth>
<cfset reportDates.lastDayOfPreviousMonth =
lastDayOfPreviousMonth>
<cfreturn reportDates>
</cffunction>


Given month: March
2004 
begin date:
<cfoutput>#dateFormat(getReportdates('March',2004).firstDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 
end date:
<cfoutput>#dateFormat(getReportdates('March',2004).lastDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 


Given month: August
2007 
begin date:
<cfoutput>#dateFormat(getReportdates('August',2007).firstDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 
end date:
<cfoutput>#dateFormat(getReportdates('August',2007).lastDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput>

Get First and last day of Month..

Hi Friends,
I am trying to fetch First and Last day of a month and would like to implement that in the following code:
SELECT COALESCE(Date_A, Date_B, Date_C)
FROM dual
Here Date A and B are in Format of MM DD YYYY (March 14, 2008)
and Date C is like MM YYYY (March 2008)
How can I get the Date_C as March 1, 2008 OR March 31, 2008 format if Date A and B are NULL ?
Thanks!
Edited by: user11095386 on Apr 23, 2009 10:45 AM

Hi,
In my earlier message, I thought that you were starting with strings like '03 12 2009' and that you wanted to display them as 'March 12 2009'. If what you have is just the reverse, then just reverse the format strings in my first message. Add a comma, if you want one, in the appropriate format string.
I believe this is what you want:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_C, 'fmMonth YYYY'),    'MM DD YYYY')
         )Notice how, on the 3rd line, TO_DATE is called without DD in the format string:
TO_DATE ( Date_C, 'fmMonth YYYY')When you do this, the day defaults to the 1st of the month, so this is all you have to do to convert the VARCHAR2 'March 2009' to the DATE 01-Mar-2009.
If you want the last day of the month, not the first, when Date_C is chosen, then use LAST_DAY:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( LAST_DAY ( TO_DATE ( Date_C
                                          , 'fmMonth YYYY'
             , 'MM DD YYYY'
         )

IDCS3 Print Booklet - Image across first and last page

Similar Messages

Maybe you are looking for