IDCS4 running very slow on a Power Mac G5 2Ghz DP
Just completed a scratch fresh install of OSX 10.5.6 and CS4 suite. Yet I'm finding the new CS4 apps very slow. InDesign takes over 40 seconds to launch, let on a colleagues MacPro Intel 3Ghz less than 5 seconds. Does any one else run CS4 on a Power Mac G5 2Ghz DP?
Gavin,
Well, the 667 Mhz is the bus speed, not the processor speed (sorry abt that, turned the figures around). It is actually a 2GHz processor speed. It is my old home-Mac, was the very first Intel iMac model that was released, but soon to be exchanged for something better (just waiting for next model from Apple - I happen to like iMacs but want more RAM).
But it is not the only one I have access to. What it produces is no worse quality wise than something produced on a more powerful Mac.
It has no problem running CS4 Premium in any of the apps as it does have a large harddisk and 2 external ones. It is both faster and more stable than the Mac Pros and the G5s (which are in the process of beeing thrown out) in the office running Tiger and CS2-CS3. I also personally run all CS4 apps on a MacBook Alu in Leopard 10.5.6. (with extra 24" display when in the office). Runs just fine.
With my limited RAM on the iMac I avoid switching back and forth between PS, AI and ID but it is no problem to have them all open at the same time as OSX memory management actually can take that and if you have an external drive (or two) for scratch even that works quite well. And I restrict the number of active fonts to only those I really use.
The Leopard with CS4 combo is much faster than Tiger and CS3.
Similar Messages
-
Mozilla Firefox run very slow on a Apple Mac OS X
Someone feedback to me that running Mozilla Firefox on a Apple Mac OS X runs very slow.
I suggesting Mozilla to fix this issues.Hey, am using firefox on my mac air 13.3 (yosemite), and i must say that there is no problem so far. tell that "someone" to clean cache and cookies, or may be a reinstall could fix it.
-
The iOS simulator runs very slow on my new Mac mini. Any ideas on how to speed it up?
I am trying to demonstrate a new iPhone app using the Mac mini and the iOS Simulator software. It runs, but it runs very slowly -- not acceptable for a presentation. Any ideas so I can make it run faster?
Thanks! Johnor the private developer forums you have access to as an iOS Developer Program member:
http://developer.apple.com/devforums/
Regards. -
Browsers running very slowly on G5 Power Mac
I have a G5 PowerMac MDD tower with 6MB RAM running Mac OS 10.4.11 (I cannot move up to 10.5 or 10.6 because of my need to use legacy software that requires the Classic environment). I also have a MacBook Air (MBA) running 10.6.4. The G5 is connected to my home Ethernet network by Cat5 Ethernet cable, the MBA via Airport. Recently my G5 has slowed down tremendously when accessing the internet using both Safari and Firefox (even with all other applications closed), while my MBA browses very fast (I have a fast broadband connection). Both computers go through the same router to access the Internet.
I have tried restarting the G5, throwing out the existing versions of Safari and Firefox and downloading the latest versions, but the G5's access to the Web remains painfully slow. I would appreciate any suggestions.I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger -
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Power PC, 10.5.8, 1.8GHz single . . . Recently running very slow, currently VERY slow. I. Must have a bug. What's the best virus scrubber out there? Thanks.
Hi, likely somethiung else, but Free Sophos...
http://www.sophos.com/products/enterprise/endpoint/security-and-control/mac/
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
In the Memory tab, are there a lot of Pageouts? -
My Mac pro is running very slow. Memory used 3.99 out of 4.00
Hello,
My mac is running very slow
- I have noticed that memory used is 3.99 out of 4.00 and the process taking most of it is safari web content. Problem also appears when I use Firefox
- this happens even I only have safari or firefox open. No other applications
- I have about 80Gb free disk space
Thanks for any suggestions1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 ' KiB/s' 1024 85 % 5 1 ' MB/s' 25000 ' ports' 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' 'DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH' -86 \< '>=' 'N\/A' down up 100 25 recvfrom sendto 'v[0]=' 'a=(' ';[[ "${v[0]}" ]]' ');v[0]=$a;ind=0' '(){ x=;[[ "$4" ]]&&x=\"${v[$4]}\";' '`eval "${c1[$1]} ${c2[$2]}" "$x"|' ' "${s[$3]}"`' ';};' CFBundleIdentifier 25 );f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' '\n%s: user %s%%, system %s%%\n' '%s\n\t(%s)\n' '%s %s' );s=('/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g' 's/^ *//;5p;6p;8p;12p' '/ Id/s/.+: //p;/Mem/{s/[^0-9]//g;p;}' '1,5d;/[Bmy].*:/d;H;${g;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;}' '5h;6{H;g;/P/!p;}' '/Cy|Cond.*: [^N]/s/^.*://p' '/:$/{s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}' 's/^.*C/C/;H;${g;/No th|pms/!p;}' '/= [^GO]/p' '{$1=""};1' '/Of/!{s/^.+is |\.//g;p;}' '/(sh|ng|ic)$/p' '/:/{$4=""};1' 'NR==2{print $4}' '/po/{sub("\\.","");print int($2/256)}' '$p' 2p '$8~/[RW]/{print $4,$1,int($9/10000000)}' 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}//;s/ .+//p' '/Launch[AD].+\.plist$/p' '/\.xpc\/(Contents\/)?Info\.plist$/p' 'NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/{print $3}' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' '/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/d;/Lib.+\/Info.plist$/p' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' '/\/(Contents\/.+\/Contents|Frameworks)\//d;p' 's/\/(Contents\/)?Info.plist$//;p' '{gsub("^| ","||kMDItem'${p[43]}'=");sub("^.."," ")};1' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '/e:/{print $2}' '1d;/[^)]$/{s/^\(.+\) //;h;d;};/[^ ]\)$/{s/^.+: |.$//g;G;s/\n/:/p;}' '/r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./{print $NF;exit}' '!/^T/{printf "(static)";exit}' 's/^.+://p' '(/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/)' '/lR/{print $2}' 'NR==2{print int($7/1024),int($10/1024)}' 'END{$3=int($3/10240);print}' 'END{if($5~/pro/)print$3}' 'BEGIN{L='${p[44]}'}!/^[[:space:]]*(#.*)?$/{l++;if(l<=L)f=f"\n\t"$0}END{print "\nContents of "FILENAME"\n"f;if(l>L)print"\n\tand "l-L" more line(s)"}' 'BEGIN{FS="= "}/Path/{print $2}' '/^ +B/{s/.+= |(-[0-9]+)?\.s.+//g;p;}' 'END{print NR}' '/id: N|te: Y/{i++}END{print i}' '/^F/!p' '/:/{$0="'"${p[28]}"'"};1' 'BEGIN{FS=":"}{n=split($3,a,".");sub(/_2.+/,"",a[n-1]);print($2,a[n-1],a[n],$1)|"sort";b=b$1}END{if(b)print("\n\t* Code injection")}' '/apsd|OpenD/!s/:.+//p' '$2>'${p[9]}'{$2=$2-1;print}' );c1=(system_profiler 'pmset -g' nvram fdesetup find syslog df vm_stat sar ps iostat 'sudo iotop' top pkgutil PlistBuddy whoami cksum kextstat launchctl 'sudo launchctl' crontab 'sudo defaults read' stat lsbom mdfind 'for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done' 'defaults read' scutil route networksetup 'sed -En' awk '/S*/*/P*/*/*/*/*/airport -I' netstat 'sudo dtrace' 'sudo profiles' 'sudo crontab' );c2=('com.apple.loginwindow LoginHook' '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[43]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "caug|dead[^l]|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Ane "SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-u 1 10' 'acrx -o comm,ruid,%cpu' '-C 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /u*/lo*/e*/per*/*/* .launchd.conf" list getenv '/Library/Preferences/com.apple.alf globalstate' --proxy '-n get default' -listnetworkserviceorder --dns -getdnsservers -getinfo '-b -I' '-m /' '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -P );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=" SP${p[j]}DataType";done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@[execname,uid]=sum(arg0)} tick-10sec {exit(0)}'";done;l=(Model 'RAM (GB)' 'RAM details' POST 'Battery cycles' 'Battery condition' 'Bad plists' 'High file counts' User Heat 'System load' 'boot args' FileVault 'Diagnostic reports' Log 'Free space (MiB)' 'Swap (MiB)' 'CPU total' 'CPU per process' 'Average I/O (MB/s)' 'I/O per process' 'Mach ports' kexts Daemons Agents launchd 'Startup items' 'Admin access' 'Root access' Bundles dylibs Apps 'Font issues' 'Inserted dylibs' Firewall Proxies DNS TCP/IP RSSI Profiles 'Elapsed time (s)' 'Root crontab' 'User crontab' 'Login hook' 'Global login items' 'User login items' 'Safari extensions' 'Restricted files' 'Hidden apps' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Average ${p[29+j]}stream data (KiB/s)";l[N4+2+j]="Current ${p[29+j]}stream data";done;A0(){ id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;v[11]=$((v[3]-`sysctl -n kern.boottime|cut -c9-18`));};for i in 0 1;do for j in 0 1;do eval A$((1+i+2*j))"${p[39]}${p[35+j]}${p[40]}${c1[30+i]}${p[41]}${p[37+j]}${p[42]}";done;eval A$((5+i))'(){ v[0]=`while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}"`;[[ "${v[0]}" ]];};';eval A$((7+i))'(){ v[0]=`while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}"`;[[ "${v[0]}" ]];};';done;A9(){ v[0]=$((`date +%s`-v[3]));};B00(){ v[0]=${a[++ind]};};for j in 0 1; do eval B0$((1+j))'(){ v[0]=$((v[0]'${p[26+j]}'p[$1]?v[0]:0));};';eval B0$((3+j))'(){ a[$1]=${a[$1]%[.+-]*};((a[$1]'${p[26+j]}'p[$2]))||unset a;};';done;B05(){ v[0]=`tail -n${p[$1]}<<<"${v[0]}"`;};B06(){ [[ "${a[*]}" ]]&&a=("${a[$1]}" "${a[$2]}");};B07(){ unset a v[0] ind;((v[2]==0))||{ v[0]=No;false;};};B08(){ v[$1]="${v[0]}";};B09(){ a=(${v[0]});};B10(){ v[0]=`grep -F "${v[$1]}"<<<"${v[0]}"`;};B11(){ n=$((${#a[@]}-1));((n>2))||return;A="${a[*]}";B="${a[n-1]} ${a[n]}";a=("${A% $B}" $B);};B12(){ v[0]=;[[ "$a" ]]&&v[0]="$a (UID ${a[1]}) is using ${a[2]}${p[$1]}";};B13(){ v[0]=$((v[0]/v[$1]));};B14(){ v[$2]=`eval "sed -En '${s[$3]}'"<<<"${v[$1]}"`;};B15(){ v[$2]=`eval "awk '${s[$3]}'"<<<"${v[$1]}"`;};B16(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B17(){ v[0]=`paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: '{printf("'"${f[$3]}"'",$1,$2)}'`;};B18(){ unset a v[0] ind;((v[1]==0))||{ v[0]=No;false;};};B19(){ v[0]="${a[++ind]}";};B20(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ echo $'\n'"${v[0]}";};C1(){ [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2(){ v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3(){ v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};C4(){ [[ "${a[*]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${a[@]}";};A0;{ B18;C2 27;B18&&! B07&&C2 28;A1 15 37 25;C2 8;A1 0 $N1 1;C0;A3 0 $((N1+1)) 2;C2 0;B00;B01 10;C2 1;A1 0 $((N1+2)) 3;C3 2;A1 0 $((N1+3)) 4;C3 3;A3 0 $((N1+4)) 5;B02 11;C2 4;B00;C2 5;for i in 0 1 2;do A1 0 $((N1+5+i)) 6;C3 $((N3+i));done;A1 1 10 7;C3 9;A1 1 11 8;C3 10;A2 2 12 9;C2 11;A1 3 13 10;C2 12;A1 4 19 11;B15 0 0 54;C3 13;A2 5 14 12;B05 12;C3 14;A2 6 36 13;B01 13;C2 15;A2 7 37 14;B02 15;C2 16;A3 8 15 15;B03 4 16;B06 1 3;C4 3 17&&{ A3 9 16 16;B11;B12 17;C2 18;};A2 10 38 17;B02 18;C2 19;B07&&{ A2 11 17 17;B05 19;B09;B11;B04 2 19;B12 20;C2 20;};A3 12 39 15;B11;B04 2 21;B12 22;C2 21;A1 13 40 18;B08 4;B14 4 0 19;A5 14 6 52 0;B08 5;A1 17 41 20;B20 5;C3 22;B14 4 6 21;A5 14 7 52 6;B08 7;B14 4 0 22;A5 14 6 52 0;B08 8;B16 7 8;B07&&{ A2 19 26 23;B20 7;C3 23;};A2 18 26 23;B20 7;C3 24;A1 4 20 21;B20 6;B08 9;A6 14 7 53 9;B08 10;B17 9 10 4;C3 25;A1 4 21 24;C3 26;B14 4 12 26;B14 4 13 27;A1 4 22 29;B20 12;B08 14;A6 14 6 53 14;B08 15;B17 14 15 4;B14 0 0 30;C3 29;A1 4 23 27;B20 13;C3 30;A1 24 24 32;C3 31;A1 23 18 28;B08 16;A2 16 25 33;B20 16;B14 0 0 34;B08 21;A8 47 21&&C0;B07&&{ A1 21 0 32;C3 43;};for i in 0 1;do A2 14 $((1+i)) 48;C3 $((44+i));done;A1 14 3 49;C3 46;A2 4 4 50;C2 47;A1 4 5 32;C3 48;A2 0 $((N1+8)) 51;C2 32;A1 4 8 55;C3 6;A2 22 9 56;C3 7;B07&&{ A1 36 42 32;C3 41;};A2 20 42 32;C3 42;A1 25 37 32;C3 33;A1 26 28 35;C2 34;A1 27 29 36;C3 35;A2 28 30 37;B08 17;A1 29 31 38;B10 17;B14 0 18 41;A2 27 32 39&&{ B08 19;A2 29 33 40;B08 20;B17 19 20 5;};C2 36;A2 29 34 42 18;C3 37;A2 32 37 43;B01 25;C2 38;A4 33 35 44 17;for i in 0 1;do B13 11;B02 $((31+i));C2 $((N4+i));B19;done;B07&&for i in 0 1;do A4 34 $((N2+i)) 45;B11;B04 3 $((31+i));B12 14;C2 $((N4+2+i));done;B07&&{ A2 35 43 46;C2 39;};A9;C2 40;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
How can I check my Mac book pro as it is running very slow
My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
I wondered if anyone else has had a simular problem, and if you can help me.
Many thanksLisadawson11 wrote:
My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
Well it depends what you have backed up to their cloud service.
If it's a lot, it's going to take a long time to upload all your stuff as Internet Service Providers restrict upload speeds to a fraction of their download speeds.
Cloud backups is bad, the data can be snooped on without a warrant, it can be lost and it's slow as heck unless it's only a small amount.
If you don't know what your doing, then disconnect from the Internet and uninstall their software, use a external drive you can get from any computer or office store and connect it to the Mac, when TimeMachine pops up and asks, say yes and let it work overnight to create your first backup (takes the longest)
Forget the Cloud, it's a joke. -
Mac suddenly running very slow, need advice on EtreCheck results
Problem description:
After a week of vacation, Mac is running very slow and unable to accomplish simple tasks. Restart and automatic updates do not seem to help, this is the EtreCheck results after most recent restart. Is the problem my HD? I am about to run a hardware test. Thanks for any help!!
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 12:36:10 PM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 2048 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:46:57
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 899.32 GB (744.49 GB free) - 69 errors
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 100.03 GB (7.27 GB free)
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
BUFFALO INC. HD-GDU3 3 TB
EFI (disk1s1) <not mounted> : 315 MB
Time Machine (disk1s2) /Volumes/Time Machine : 700.00 GB (441.58 GB free)
NTFS (disk1s3) /Volumes/NTFS : 1.80 TB (1.77 TB free)
ExFAT (disk1s4) /Volumes/ExFAT : 500.01 GB (436.70 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. iPhone
Apple Inc. Apple Keyboard
Logitech USB LaserStream(TM) Mouse
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.16) [Click for support]
/System/Library/Extensions
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) [Click for support]
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.teamviewer.teamviewer.plist [Click for support]
[running] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.livescribe.PenCommService.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[running] com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
PollockShare Volume (/Volumes/PollockShare)
Dropbox Application (/Applications/Dropbox.app)
Google Drive Application (/Applications/Google Drive.app)
BackUp Volume (/Volumes/BackUp)
BootChamp Application (/Users/[redacted]/Downloads/BootChamp.app)
Spotify Application Hidden (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
TeXDistPrefPane [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 899.32 GB Disk used: 154.83 GB
Destinations:
Time Machine [Local]
Total size: 700.00 GB
Total number of backups: 93
Oldest backup: 2014-02-21 22:42:44 +0000
Last backup: 2015-03-26 18:26:48 +0000
Size of backup disk: Adequate
Backup size 700.00 GB > (Disk used 154.83 GB X 3)
Top Processes by CPU: ℹ️
27% com.apple.appkit.xpc.openAndSavePanelService
5% WindowServer
4% Get Backup Lite
3% Finder
3% Mendeley Desktop
Top Processes by Memory: ℹ️
344 MB Mendeley Desktop
241 MB Google Chrome
223 MB mds_stores
148 MB Google Chrome Helper
137 MB Finder
Virtual Memory Information: ℹ️
8.52 GB Free RAM
4.86 GB Active RAM
2.13 GB Inactive RAM
1.66 GB Wired RAM
3.61 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 26, 2015, 11:45:20 AM Self test - passedarmypunk wrote:
My backup is up to date, I ran a hardware check and found no issues, then ran the Disk Utility and it also said it found no issues but I hit repair anyways. After a restart I ran EtreCheck again and this is what came out. The computer is still horribly sluggish. Do I just keep repeating the Disk Utility check and repair step???
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 3:20:28 PM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 2048 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:13:41
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 899.32 GB (745.69 GB free) - 24 errors
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 100.03 GB (7.27 GB free)
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPad
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Logitech USB LaserStream(TM) Mouse
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.16) [Click for support]
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.16) [Click for support]
/System/Library/Extensions
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) [Click for support]
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.teamviewer.teamviewer.plist [Click for support]
[running] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.livescribe.PenCommService.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[running] com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
PollockShare Volume (/Volumes/PollockShare)
Dropbox Application (/Applications/Dropbox.app)
Google Drive Application (/Applications/Google Drive.app)
BackUp Volume (/Volumes/BackUp)
BootChamp Application (/Users/[redacted]/Downloads/BootChamp.app)
Spotify Application Hidden (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
TeXDistPrefPane [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 899.32 GB Disk used: 153.63 GB
Destinations:
Time Machine [Local]
Total size: 700.00 GB
Total number of backups: 93
Oldest backup: 2014-02-21 22:42:44 +0000
Last backup: 2015-03-26 18:26:48 +0000
Size of backup disk: Adequate
Backup size 700.00 GB > (Disk used 153.63 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
2% mds_stores
1% mds
0% fontd
0% Dropbox
Top Processes by Memory: ℹ️
124 MB mds_stores
120 MB Spotify Helper
103 MB Finder
103 MB Google Drive
86 MB Dropbox
Virtual Memory Information: ℹ️
12.99 GB Free RAM
2.25 GB Active RAM
561 MB Inactive RAM
1.37 GB Wired RAM
1.31 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 26, 2015, 03:04:16 PM Self test - passed
You have had 2 experienced users tell you the HD may be failing, looking at your latest report this confirms the suspicion. Take the machine to either an Apple Store or AASP and have it professionally diagnosed. -
Mac mini running very slow after downloading yosemite
Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
Here is a recent EtreCheck Report
Problem description:
Mac mini running very slow after upgrading to yosemite
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 2:56:48 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Cinema HD 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Computer, Inc. Apple Cinema HD Display
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Primax Electronics Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
[killed] com.apple.xpc.loginitemregisterd.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
16 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
CDSBupd Application (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
27% mds
12% WindowServer
1% discoveryd
1% Microsoft Word
1% Mail
Top Processes by Memory: ℹ️
253 MB discoveryd
64 MB Mail
52 MB Safari
43 MB iTunes
43 MB Preview
Virtual Memory Information: ℹ️
42 MB Free RAM
768 MB Active RAM
744 MB Inactive RAM
993 MB Wired RAM
104.37 GB Page-ins
4.15 GB Page-outsMore memory will help:
4.15 GB Page-outs
16 processes killed due to memory pressure
15 processes killed due to memory pressure -
My mac mini is running very slow all of a sudden, how can i restore it's speed?
my mac mini is running very slow all of a sudden, how can i restore it's speed?
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
my i mac is running very slow .
Details of my mac - iMac 11.3 ,intel core i3 , 3.2 ghz , is it advisable to install mac keeper to clean up my mac
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 16 GB
Processor Interconnect Speed:
Boot ROM Version: IM112.0
SMC Version (system): 1.59f2
Serial Number (is it advisable to install mac keeper to clean up my mac
No.
Find out what's wrong with you Mac and fix it.
Determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
Model Name: iMacasdf
No. -
Desktop is an imac is 10.6.8 running firefox v 3.6.16 and runs well. My mac laptop also 10.6.8 automatically upgraded to 6.0 and runs very slow, and I do not like the layout of the toolbar. How do I get my laptop back to 3.16.6
Now it is clear which it wasn't before! We can't see what you have done or not so a good descriptions does help when communicating.
If you have done all you say and some restarts too I would advise you to do the install of 10.6 from the installation disc. Restart the computer and then install the 10.6.6 Combo update. You just install "on top" of what you have. No archiving or formatting. -
System with yosemite running very slow with mac book pro
Problem description:
yosemite is running very slow
EtreCheck version: 2.0.11 (98)
Report generated November 3, 2014 at 8:35:53 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:37:14
Disk Information: ℹ️
WDC WD10JPVX-22JC3T0 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh (disk0s2) / [Startup]: 749.35 GB (681.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP? (disk0s4) <not mounted> : 250.00 GB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 16
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
[not loaded] com.kaspersky.kext.kimul.44 (44) Support
[not loaded] com.kaspersky.kext.mark.1.0.5 (1.0.5) Support
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] com.zeobit.kext.AVKauth (1.0) Support
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Extensions
[loaded] com.kaspersky.kext.klif (3.0.4a41) Support
[not loaded] com.kaspersky.nke (1.6.4a15) Support
[not loaded] net.sourceforge.ext2fs.fs.ext2 (1.4d4) Support
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.12) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.jft.driver.PdaNetDrv (1.0.64) Support
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
Startup Items: ℹ️
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.trial.plist Support
[loaded] com.paragon.NTFS.upd.plist Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.CS5ServiceManager.plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.kaspersky.kav.gui.plist Support
[not loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[not loaded] com.google.keystone.daemon.plist Support
[not loaded] com.kaspersky.kav.plist Support
[not loaded] com.livescribe.PenCommService.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] com.oracle.java.Helper-Tool.plist Support
[not loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.zeobit.MacKeeper.AntiVirus Support
User Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.valvesoftware.steamclean.plist Support
[invalid?] com.zeobit.MacKeeper.Helper Support
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDQuickView UNKNOWN (missing value)
Internet Plug-ins: ℹ️
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
Google Earth Web Plug-in: Version: 6.0 Support
VLC Plugin: Version: 1.0.5 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.9 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
vkbd
URLAdvisor
Virtual Keyboard
URL Advisor
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
DivX Support
ExtFSManager Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh: Disk size: 749.35 GB Disk used: 67.83 GB
Destinations:
TimeMachine [Network]
Total size: 991.33 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 991.33 GB > (Disk used 67.83 GB X 3)
Top Processes by CPU: ℹ️
35% watchdogd
4% WindowServer
1% AppleSpell
0% launchd
0% notifyd
Top Processes by Memory: ℹ️
258 MB firefox
112 MB Finder
94 MB com.apple.internetaccounts
77 MB NotificationCenter
77 MB com.apple.dock.extra
Virtual Memory Information: ℹ️
4.64 GB Free RAM
2.58 GB Active RAM
597 MB Inactive RAM
772 MB Wired RAM
831 MB Page-ins
0 B Page-outs
I am new to Mac and I dont know what to do, please help.Completely uninstall the Kaspersky software AND MacKeeper. Both aren't necessary and can cause all kinds of issues.
Also check if Paragon and Virtualbox are up to date.
Maybe you are looking for
-
How Can I Safely Delete a RoboHelp 9 Project?
I am learning/evaluating RoboHelp 9 using IconLogic's "Essentials of Adobe RoboHelp 9 HTML". This book has excellent step-by-step lessons and contains student data files to make it easier to learn. The student lessons were downloaded and unzipped
-
The CSSD does not start automatically on Non-RAC - AIX 5L
Hi all, Database: Oracle 10.2.0.4 O.S AIX 5.3 TL 10 I am facing a problem with the CSSD Non-RAC/Clusterware. When we restarted the server the service CSSD does not start automatically and there is no relevant messages in the log files of CSSD. Runnin
-
ADD A CONTACT TO PHONE HELP HELP HELP HELP
HOW DO YOU ADD A CONTACT TO YOUR PHONE LIST?????? i CANNOT FIND ANY PLACE TO ADD A CONTACT TO MY LIST OF PEOPLE IN MY PHONE BOOK... AND I CANT GET INTO CALL HISTORY BECAUSE IT WANTS A PASSWORD THAT I HAVE NEVER CREATED SO DON'T HAVE ONE I AM QUICKL
-
Cannot change Firefox start page on XP, always Dell Start page.
I cannot change the start page on Firefox on my Dell XP. I can change it on I.E., Seamonkey, and Netscape. Firefox always becomes the Dell/Google start page. I don't have the GoogleAFE nor the Browser Address Redirect programs. I don't have the My Wa
-
Shipping conditions in sales order Header
Hi For certain users , field shipping conditions VSBED (Header) needs to be in display mode only in T-code Va02 i am creating a security object and that will be assigned to those user roles. I need user exit which can be used to trigger this cha