IDCS6 (PC) stops working during spell check

This is happening repeatedly. Our small office is using our own custom dictionary for spelling that I just recently created. Based on an article on another website IU have followed its suggestion for placing the dictionary on your server (rather than workstation C drive) so that all work stations can use and point to the same dictionary. Not only is the dictionary newly created (by exporting it from our old ID2 dictionary) but the entire IDCS6 installation is only a week old and is still being setup by me. Below arescreen shots that occur after using the spelling check for a minute or so. Any idea of what might be going on and how to fix it?

Thx @ Peter
"Do you still get crashing if you move the dictionary back to the user profile where ID is expecting to find it?" I have not tried that and probably will do so. While it'd help diagnose whether problem is that Indd does NOT like having dictionary on server, I really don't want to take the time. Indd Help clearly states and recommends that custom dictionary be on server in these circumstances so that every work station is applying the same spelling and hyphenation rules.
I appreciate your response and your unwillingness to bash Microsoft as I had, but my own experience is that Microsoft (and other large companies) often act in ways to promote their own solutions and products and intentionally or unintentionally make it more challenging for other software (or other products) to work with their operating system (or whatever it is that they sell).
If it seems warranted, I will report back here if from more actual use and experience I have something of value to add. Again thanks ...

Similar Messages

During spell check (Pages), how to eliminate red underling?

Hello:
During spell check (Pages), how to eliminate red underling?
This is a personal preference: I always spell check when finishing my work, don't want the visual distraction for the underlines.
Thanks,
Laurence Misterioso

Laurence,
Go to the Edit menu and enter the Spelling settings there. Deselect "Check spelling as you type".
Jerry

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

Itunes has stopped working Windows is checking for a solution ....

After I just upgrade my itunes and restart the computer I click on itunes and get a message itunes has stopped working Windows is checking for a solution to the problem….’ This is then followed by another message ‘a problem caused the programme to stop working correctly. Windows will close the program and notify you if a solution is available.’
I try to open in "safe mode" and getting the same message.
I am trying to figure out what to do about my son's itouch he has lost it/stolen at school. Feeling worried and would like to be able to get in my itunes account now.

This is the simplest fix, if you're still having a problem with it. I had the same problem, am running Windows 8.1. Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Let me know if you have a problem.

HT1600 My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

Welcome to the Apple Community Turbomedic.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Z30 stopped working during 10.2.1 update

My Z30 stopped working during the 10.2.1 update (Fido). The screen is completely dark, the only sign of life is the blinking red light. The pattern is 1 long blink followed by a pause and then 6 quick blinks. I have purchased tech support for 50$ without any resolution. Now on day 4 of issue.
Does anyone have any idea how to get my phone back to life????
Here is what I have tried already:
I tried reloading the OS via bb link. Keep getting a error: "error communicating with device"
I tried reinstalling my bb link and reloading the OS
I tried reloading the OS via online os update
The same things were tried by tech support and no luck there either.
I did all these things with and without sim/micro SD

Try a new USB cable. If doesn't work turn phone off plug into computer with link open and then turn on when plugged in then hit reinstall. Phone sounds like it is bricked. See if this helps.

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out.

Gps stop working during the run

I've purchased my SW3 mainly due to GPS stand alone.
unfortunately it stops work during the run or just about 10 minutes after has started.
I've tried My tracks , Run Keeper IFit outside and all of them happen the same .
could you fix this ?

From XDA
Quote
You need to download Google's My Tracks app and it will sync to your phone. Once you do just go down to my tracks and select run, and once it locks you'll see that location icon in the top left corner of watch showing that it has GPS lock
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Syncing causes itunes to stop working during optimisation of photo's, what can i do to resolve it and get complete sync

every time i try to sync recently it only optimises about 1/3rd of photos then says itunes has stopped worked, click to check online or click to close program and it hasnt fully synced, what can i do to resolve it to get a full sync as i need all the info to transfer from pc to phone

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Itunes has stopped working during optimizing

I am running iTunes 10.4.1.10 and syncing to an iPhone 4. Syncing used to work, but all of a sudden after backing up and copting apps during Optimizing 1 of 5, I get "Itunes has stopped working" then need to click which ends iTunes. Ideas?

Check this thread out -> itunes has stopped working...here are the problem reports:
Try unchecking the Include videos option in iTunes, under Photos. You'll click the iPhone on the left side of iTunes, then click Photos across the top of iTunes to see the option.
You can always import the videos into iTunes and then sync them to the iPhone using the TV Shows or Movies tab.

My Nokia Lumia 710 stopped working during updating...

My Nokia Lumia 710 was connected to my Pc by cable and was being updated. As the updating was going on, probably during the 7th or 8th step, it hanged and stopped responding. The updating could not complete. The worst is that the phone can no longer be powered off except when you remove the battery and after replacing the battery, it cannot boot, except to draw a diagram of phone connected to a PC. That was the stage in the updating process when it stopped working.
Please, advice me on what to do becasuse the phone is of no longer use to me. I bought it in December 2012 and it got spoilt in April 2013. I have taken to Nokia Care centre around me. but the price they said they will use to repair it is equivalent to buying a new one. Please help.

Hi Sathya87,
We're appreciate your trust that you have shown us. In this case, I suggest contacting Nokia India as they can further assist you with your concern. You can reach them by clicking on the Nokia Support at the bottom of the screen, or using this link:
www.nokia.com/support
Hope this helps.

Photoshop CS6 stops working during random operations

Greetings,
I am asking for help again, as I have not had luck in getting this issue resolved. I have a PC with Windows 7, and am using Photoshop CS6. At random times during working in Photoshop, pop up screen just says "Adobe Photoshop CS6 has stopped working". Then offers to try find solution or to close program. There has not been a solution offered if I picked that option. The drop down has the following information:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Photoshop.exe
Application Version:                           13.0.1.34
Application Timestamp:                     5269b25c
Fault Module Name:                          Photoshop.exe
Fault Module Version:                        13.0.1.34
Fault Module Timestamp:                  5269b25c
Exception Code:                                  c0000005
Exception Offset:                                00000000013d2c43
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  f9e2
Additional Information 2:                  f9e24777b0092585ed64e9d6de9c0053
Additional Information 3:                  8f7e
Additional Information 4: 8f7ea650658a76a57517207fdab610f7
After restarting Photoshop, there is no recovery to find my document either. Any help would be appreciated.
Thanks

Look at the OS Event Viewer. See if you can find the line Faulting Module. That will be where problem is.

Creative Cloud Illustrator & Photoshop 'has stopped working' - 'windows is checking for a solution..

Hello,
Up until recently, Photoshop & Illustrator stopped working. When I would open the program it would begin to load and then come up with the message ' Adobe Photoshop has stopped working'
After which there would be another message ' Windows is checking for solution to the problem'
and then finally ' A problem caused the program to stop working correctly, windows will lose the program and notify you if a solution is available.'
Indesign on startup seems to load normally and is fine.
Do help, time is of the essence.
Thank you,
Tanya
[email protected]

This is the simplest fix, if you're still having a problem with it. I had the same problem, am running Windows 8.1. Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Let me know if you have a problem.

PSE 12 Organizer stops working during import

I just upgraded to PSE 12 and cannot get the Organizer to import using "From Files and Folders" option. After selecting [Import][From Files and Folders], Organizer opens Windows Explorer view and then I receive the popup that program has stopped working and Windows is searching for resolution. I can re-open Organizer without any impact that I can tell but error repeats if I try to import. I can import the pictures into Organizer from the File Save As option while in Editor.
I have tried:
1. Launching Organizer with Catalog Options trying new, rebuild and conversion(from PSE11) but none have helped.
2. Renamed Media*.db3 file and launched Organizer but same result.
Very frustrating to have new/upgraded product and it not work as expected.
I've got PSE12 loaded on a Windows 7 Home Premium PC.

Back again...during my search for psa.prf and status.dat I noticed folders and files from Version 7 and 11 still on my PC. Thinking that maybe they could be causing conflict I uninstalled PSE v12 and PE v12, removed all Adobe folders related to PSE and PE, then I edited my registry removing any entry containing reference to either program. I then re-installed PSE v 12, started out with new catalog and got same result although the error message changed from "Program stopped responding..." pop-up to Visual C++ Runtime error pop-up. I then upgraded to PSE V12.1 same results. Then went thru same process with PE v12 with no improvement.
Extremely disappointing!!!

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

IDCS6 (PC) stops working during spell check

Similar Messages

Maybe you are looking for