IdcService SOAP WSDLs

There are lot of idcServices which are OOTB ..is there a way where I can get the wsdl's for those as there are only few wsdl's available under SOAP wsdls link.

Yes, take a look at this link: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10807/a01_wsdl_and_soap.htm#sthref1831

Similar Messages

Export SOAP WSDL's in UCM

Hello All,
I have created WSDL for 'AddCollection' in development env. I can able to create collection (folders) & check-in docs to this collections through a java program using this wsdl. Now i want to export this AddCollection.wsdl file to testing env. I couldn't find any option for exporting & importing soap wsdl's in UCM. (or) I have to generate/create the same structure of collection wsdl in testing env manually, is this right way?
Could anyone can provide some idea to overcome this tasks.
My UCM configuration is
Product Version 10.1.3.3.2 (071031)
Product Build 7.2.2.184
Native Version 7.1.0.1
Thanks.
Regards,
Gowri.

You have several options:
First, check out the <install>/data/soap/custom directory and you might find the definition of your custom wsdl. You could move that over to the new server, wire it in and see if it shows up?
Second, there used to be a class called WsdlMerger.java that would allow you to create a component that would install/update custom wsdl's on target machines. This is of limited use for one or two moves, but if you're creating a component with a lot of reuse it works slick. It does take some work to build out and does require some Java skills. If interested, kick me a note and I'll try to get you the Java class for you to toy around with. jason at corecontentonly dot com.
-Jason
http://www.corecontentonly.com

SOAP/WSDL builder for C programming

Dear guru,
is any possibility or can you give any hint if exist some SOAP/WSDL builder for creating C libraries from SOAP/WSDL and vice versa?
Thanks a lot for help.
Regards,
Roman

Rfcsdk, there is a genh.exe in bin folder, which can be used to generate c headers according to ddic table/struct def (se11).
and, you may use Nco to generate wsdl / c# class desc.
all these two method may use se37 function
RFC_GET_FUNCTION_INTERFACE(RFC_GET_FUNCTION_INTERFACE_US) to get function parameter info(I,E,T...) and for a struct/table use RFC_GET_UNICODE_STRUCTURE to get detailed struct info, you may then generate your sql/c#/c typedef/...
Hope these info can be help, you may reach me at <b><REMOVED BY MODERATOR></b>, good luck.
Message was edited by:
Alvaro Tejada Galindo

Weblogic.soap.wsdl.Remote2WSDL

weblogic.soap.wsdl.Remote2WSDL doesn't create the first line in the JSP:
<% response.setHeader( "Content-Type", "text/xml; charset=utf-8" ); %>
that the wsgen Ant task seems to.
Any clues?

This is not a supported Tool. Anyway, the following seems
to work:
java weblogic.soap.wsdl.Remote2WSDL java.util.Vector /foo/bar
regards,
-manoj
"Johannis Dihayco" <[email protected]> wrote in message
news:[email protected]..
Hi, I'm trying to generate the WSDL JSP using the
weblogic.soap.wsdl.Remote2WSDL
utility of Weblogic 6.1.
However I can't seem the jsp file generated contains nothing.
Do I need to run the utility in a directory containing the ejb jar file? How
is the EJB_interface path specified? (what is
meant specifically by fully qualified class name)?
[att1.html]

Migrating SOAP WSDL Defs through environments

Hey
I am using the WsdlGenerator component to allow me to create WSDL defs to the Content Server Services. My .Net apps are using the WSDL's to connect to Web Services to perform a variety of functions...
I have recently moved my processes up from Dev into our UAT environment. I have installed the WsdlGenerator component in UAT, but can't figure out how to move the Wsdl defs up. I tried moving the .wsdl files to the "\weblayout\groups\secure\wsdl\custom" folder on the target server, but my code cannot connect to these webserver defs. For the moment, I have resorted to moving the defs by hand, recreating them in the target environment using the "Soap Wsdl" screen under Administration in the Web Client.
Is there a better way to do it?
BTW - I am using Content Server 7.5 on a Microsoft based environment.
Cheers,
Al

Hi,
It looks HTTP Status code 200. That means you already connected to third party. It may be the reason for response message .
Standard response for successful HTTP requests. The actual response will depend on the request method used. In a GET request, the response will contain an entity corresponding to the requested resource. In a POST request the response will contain an entity describing or containing the result of the action.
Deva

How do I create only SOAP WSDL bindings when deploying my ESB?

Currently when I use either jDeveloper or the ant deployESBSuitcase task to deploy the ESB that is the entry point to my application I get two bindings in the deployed wsdl. One soap binding that my client will be using and another esb binding. Is it possible to modify the deployment plan to only generate the SOAP binding? Do I need to have the esb binding for an esb that is only used as the entry point to my application? I would prefer to have the wsdl that is exposed to my clients to not have the vendor extensions if possible.
thanks

I have experienced the exact same problem. There is no good solution to these poorly designed and overly complex login protocols. After unsuccessfully trying to retrieve my password or change my password I finally set up a new email account, a new Apple ID and a new iTunes account.
I know it is not a good solution, but it worked.

Webservice soap wsdl generation

Hi Experts,
Please Help Me,
Systems. ThirdParty (PHP Portal) --> SAP PI--> SAP ECC
1: What is best practise to add ThirdParty as business service or business system.
Scenario1: TirdParty Request for emp address based on the emp id here emp address in sap ecc.
i would like to use SOAP TO PI TO RFC (req & res bapis)
2. this scenario thirparty will generate wsdl and import to SAP PI or SAP PI side should generate wsdl.

1. business service
2. you should generate wsdl from sender agreement in SAP PI (Integration Builder)

PHP5 SOAP WSDL and Xcelsius 2008 communication error

Hi,
I wood like to use PHP5 Soap server and WSDL for Xcelsius2008.
Now Xcelsius 2008 can read WSDL parameters, and data from Xcelsius appear in Soap server, but in the Soap Response is the error message:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
    <faultcode>SOAP-ENV:Client</faultcode>
    <faultstring>Bad Request</faultstring>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
My WSDL is here:
http://www.tanit.hu/custimp/wsdl/hello/hello_04.wsdl
My PHP5 Soap Server:
<?php
ini_set("soap.wsdl_cache_enabled","0");
$server = new SoapServer("hello_04.wsdl");
class HelloService{
function doHello($yourName){
    if (strlen(trim($yourName))) {
      return "Hello ".$yourName;
    } else {
      throw new SoapFault("Server","The input parameter is Empty!");
?>
My PHP5 Soap Client (is working properly):
<?php
ini_set("soap.wsdl_cache_enabled","0");
try{
$sClient = new SoapClient('http://www.tanit.hu/custimp/wsdl/hello/hello_04.wsdl');
$response = $sClient->doHello('MyName');
echo $response;
} catch(SoapFault $e){
var_dump($e);
?>
Could somebody help me?
Thx.

OK.
[I found this.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233343330333133373334%7D.do]

Simple SOAP+WSDL example needed

I'm pretty much confused about SOAP and WSDL and can't find a good and simple example. I use Sun One Studio. How do I run some web service example.

You can find some examples:
http://java.sun.com/xml/jaxp/dist/1.0.1/examples/#building
http://newinstance.com/writing/javaxml2/javaxml2_examples.html
http://www.docuverse.com/domsdk/index.html#tutorial
http://www.devx.com/sourcebank/search.asp

SOAP : WSDL testing

Hi All,
Scenario is SOAP to RFC synch.
My SAP PI server and working LAN (PC LAN) is in different server.
Anyone please tell me how to check the WSDL is working or not before sending to client?Means how to test the scenario?
Thanks,
Arthita

Hi,
Above mentioned SOAPUI is trial version.
Now find out one free tool "WebService Studio". Is it fine for testing?
But how to test with the same?
If anyone have any link , please provied.
Thanks,
Arthita

Non-SOAP WSDL bindings? (GET/POST?)

Hi,
I would like to know if Aqualogic Service Bus can transform SOAP requests into GET/POST requests?
My organization has several legacy services, which are really just CGIs that accept GET query parameters and return XML results in the HTTP response body.
I would like to integrate those services into an SOA based environment.
I hoped that I could model my legacy services as Web Services using an HTTP GET binding (using WSDL). Then I could import them into Aqualogic and design a transforming proxy in front of them. Is that possible?
Thanks,
Erik

Erik,
just define a SOAP based proxy service and before calling the CGI based business service extract data from the SOAP body and add it to the http transport headers for the outgoing business service call. We have done this succesfully in some projects.
-Kai

SOAP / WSDL LabView 2010 can't connect to local webservice of network printer

Hi,
we are using a Labelprinter from cab (www.cab.de) that supports a webservice.
IP: http://192.168.1.66/services.wsdl
When i use this link in FireFox i will get a XML file (see attachment). The company "cab"
has an example using NetBeans to write a deskop application using Java. I tried that and
i was able to connect to the webservice.
When i do that with LabView 2009 or 2010 i get an error message:
1. URL doesn't exist or WSDL is wrong
2. authentification failed
3. proxy settings wrong
to 1)
i'm shure the link is ok, i can't connect to it with Netbeans (i used copy & paste to be sure)
to 2)
In Netbeans it is not possible to enter a user and PW. But anyway i have use the standard
soap user the was given by the company.
to 3)
don't use it
The last point is, that there is an error in LabView 2009 and 2010, e.g. error parsing the XML file?
Can someone help me?
Attachments:
services.zip ‏2 KB

HI I have the same problem with my CAB printer...
I try the Solution from the link
https://decibel.ni.com/content/docs/DOC-22722
With the soapUI it works well, I can make requests to the printer an become an answer...
But in Labview it doesn't work. The TCP read vi brings the error 66 an I have no idea! Have someone a solution or an idea?
Best Regards samsi
Attachments:
SOAP_CAB_Drucker.zip ‏32 KB

Supported soap/wsdl binding levels in 7.0

Can someone post an official link from SAP or a sap note confirming the wsdl /Soap binding levels supported, Please do not post if its not an official link.
Regards
Ravi Raman

Hello Ravi
Please check note #944029 XML Schema supported by ABAP proxy generation. Is this what you are looking for?
Regards
Mark

Webdialer with SOAP (WSDL)

Hi,
i am trying to write a test class for an application, where you can use webdialer functionalities.
The code is written in Java (Visual Studio J#) and the webdialer web service is imported as a web reference.
cred = new Credential();
cred.set_userID("user");
cred.set_password("pass");
UserProfile prof = new UserProfile();
prof.set_user("me");
prof.set_lineNumber("my_phone");
prof.set_locale("default");
prof.set_supportEM(true);
wds = new WebdialerSoap();
CallResponse resp = new CallResponse();
wds.set_Url("https://<CCM_IP>:8080/webdialer/services/WebdialerSoapService");
resp = wds.makeCallSoap(cred, "called_number", prof);
On makeCallSoap i get this error:
{"The underlying connection was closed: An unexpected error occurred on a send."}
{"Authentication failed because the remote party has closed the transport stream."}
Any ideas what am i missing?
Best regards,
Marko

I suspect that's not possible because with EM you could potentially have two lines with the same dn/partition on two different phones.. and so it is important that the CCM knows from which phone the call should be made.
However, via axl you can extract whatever info you need. In case of em, both the physical device and the device profile are in the table device, the DNS are in the table numplan, and linked to each other via devicenumplanmap table. Furthermore the enduser is in the enduser table and then we have the extensionmobilitydynamic table which shows you who is logged in where with with profile.

SOAP/WSDL and web-proxy

Hi,
I'd like to use WebServiceProxy.getServiceAt(URL) method with
a web proxy. How can I give it the address of my proxy?
Thanks,
Miguel

Hello,
Could you tell me what tool it is you are using?
Sounds interesting.
//Daniel.

IdcService SOAP WSDLs

Similar Messages

Maybe you are looking for