IDE 3 with MSI KT4 Ultra

Hello!!
How do I get the Promise Controler Fast Track 376 on my Board to work?
I tried to connect both of my HDD´s (not at same time!!) but he will not recognice them!! After POST it says no drives detected, or Bios ist not installed (or something like that!!!)
I just need an explicit How To, because the tips and how to´s in other Boards haven´t worked!! I haven´t tried any Bios modifications or so!! The Mobo Bios ver. number is 1,4!!
I had no probs with that Highpoint Controller! What is so different with the Promise Controller!!
Sorry for my bad english! I am from Germany! .-)

Hello!!
The Raid Controller is enabled in BIOS
The Jumper Settings are correct (As displayed on HDD!)
The drives are working currently on IDE 1 without probs! (No PSU - 420 W - probs!!)
I can only try to use SATA to PATA Converter next!!?? or?
Thanks to everybody for helping me!!
Nobody

Similar Messages

Sata Raid problems with MSI KT4 Ultra Via kt400 chipset

ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
it comes up with my irq settings are wrong
my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
would help lots thanx

you dont need multiple threads on the same thing

Urgent help with MSI KT4 Ultra

hey,
off my folks yesterday i got...
MSI KT4 Ultra
512mb DDR333 PC2700
Athlon XP 2600+
Maxtor DiamondMax9 40gb HDD...
i thought i had it all setup right with the HDD in IDE1, DVD and CD-RW in IDE2 and floppy in the floppy bit...
at 1st the CPU cwas only clocking at 1250mhz, but then came here and sorted that prob..... (Sperad spectrum then adjusted the FSB to 166mhz ) then after that, when i go to boot up i got.... "no device connected to the Fasttrack controller...bios not installed" then browing through the forum i found how to "solve" that problem... ( disabled the Serial ATA thing, dont know if thats right .... ) but now i dont get that "bios not installed" line any more.... all i get is a flashing line in the top left of my screen....
so to sum up....all i get now is.... that flashing line......what could be goin wrong?
Thanks in advance.....a very distressed...
//Simpo

This is an AMD board, so I will move your post to that forum.

Overclocking with MSI KT4 ULTRA

Hi,
I'm currently overclocking my XP 1600+ Palomino to just under an XP 2200+. My Idle temp is 39C and 47C at Load. My CPU is still locked and I'm running at 167FSB x 10.5 = 1758Mhz / 334 Mhz DDR. So far this is the highest stable overclock I am able to get with my current config. I want to get up to atleast a FSB of 180 - 185 to give my GeIL 512MB DDR433 PLATINIUM some sort of challenge, but I can't get the board to post at anything higher than 168FSB. Is it my board topping out or my CPU? What kind of overclocks is everyone else getting with their KT4 ULTRAs? Any help would be greatly appreciated. Thanks )

Hehe so u think all is about MHz!!!????
If u think so go and get some education about overklocking!
I have reached 209FSB!!! Thats overkill!
And im running my system now on the min level x9 Multippel.
And that wil give me a damn strong and powerfull system, I can overklock it to reach the MHz frequence to but i dont right now, i must get a new mobo first, MSI is only !!!
Its up, i wil get a ABIT, or EpOX mobo. then i+ll show u :D
Hmm i have a picture if u want.
But i dont know how to make a link to it, becouse i dont have a webpage now.

Problem with my MSI KT4 Ultra

Hi all!
I have a BIG problem, I have tried to look at this board, but there is many different answers out there ;(
I have KT4 Ultra with Athlon XP 2600+
I have set FSB to 166, and when I startup BIOS says Athlon XP 2600+.
But in windows system, it only says:
AMD Athlon XP2600+
2.09Ghz !!!!
768Mb RAM
Why is windows only says 2.09Ghz??
AND, I think my system is very slow. I used to have AMD 1200Mhz. And this sytem is almost like my last computer.
My System:
MSI KT4 Ultra ( MS-6590 ) with BIOS
CPU AMD Athlon XP 2600+
768MB DDR 400 RAM
GeForce 4 TI4200AGP 8x
80 Gb Seagate 7200 Harddrive

Quote
Originally posted by swedecom
Ok, I use these settings in my BIOS, are they right for my system??
MY SYSTEM:
MSI KT4 Ultra ( MS-6590 ) with BIOS
CPU AMD Athlon XP 2600+
768MB DDR 400 RAM
GeForce 4 TI4200AGP 8x
80 Gb Seagate 7200 Harddrive
MY SETTINGS IN BOIS:
Spread Spectrum = +- 0.25%
CPU FSB Clock = 166Mhz
CPU Ratio = Auto
CPU Vcore = (V) Auto
DDR Voltage (V) = Auto
Termination Vol (V) = Auto
AGP Voltage (V) = Auto
Hope someone can help me out

Linux and MSI KT4 Ultra : DVD problems

Hi, I own an MSI KT4 Ultra Pure mobo. The vt8235 Southbridge is supported in the lastest version of the Linux Kernel, 2.4.20 . After upgrading the kernel all seems to work fine, but when the system try to initialize my hdc (Secondary master of IDE, a DVD reader DV-5800A from NEC) it locks up with the message :
hdc: device {Busy}
hdc: drive not ready for command
ide1: reset success!!
and start looping with this message.
What can I do to get work my DVD Reader? With my precedent MoBo it works perfectly
Thanks
Bye

Hmmm that error used to happen with an older kernel and an ALI chipset. If you leave it long enough does it give up trying and continue to boot? The ALI did this eventualy.

MSI KT4 Ultra! A little question.

Hello. )
I'm very interested, in the new MSI KT4 Ultra, but i've a doubt:
The pure version of the KT4 Ultra, has a fan on the chipset?
How many IDE channels come with this pure version?
Thank you, and sorry about my poor english. :D

You can modify de FSB in the bios, but there is a jumper that provides these 3 options, 100mhz, 133mhz and 166mhz. 100mhz for the duron cpu's, 133mhz for the Athlon xp Palomino and Tbred, and 166mhz for the athlon xp Barton ( not 100% confirmed).

What the heck is up with my KT4 Ultra-sr

hey guys/girls, just wondering if somebody can help me with some issues i'm having with my Kt4 Ultra-sr that i just bought 3 days ago.
First problem i'm having is that i can only get the raid to detect 1 drive on IDE 3... i have tried various configurations and nothing works.. either one drive or the other but never both.
Second problem is that every once in a while i get a high pitch beep coming from my system....i don't know what it is..i used to have a Gigabyte 7dxr witrh a 1.4TB with 512 ddr and i didn't get any beeping.. i upgraded to the Kt4Ultra-sr with a xp1900+, one 512 stick of samsung ddr kt400... and i'm getting a beeping.. i thought at first it might be the power supply but i just bought it 3-4 months ago.. it is a SH Power 365 Watt dual fan. ?(
anybody out there able to help me?

Hi,
There are plenty of reviews around on MSI's mobo as well as the too few others that are out there at the moment.
This issue is pretty well common to all the mobo manufacturers for the time being as it is a Serial ATA issue, not a mobo issue. Have a look at Tom's Hardware Guide or amdmb.com, interesting reading.
Cheers,
Dimal.

No optical-out sound on MSI KT4-Ultra!!

Hi, I have recently set up a system based on the MSI KT4-Ultra board. I'm using an Athlon XP 1700+, a Radeon 9000 video card, and I've installed Windows 98.
Although all the drivers and audio applications which MSI provided installed fine, and 2-channel audio from the on-board sound chip works great both for music and for the 3-4 games I've installed so far, I can't seem to get the optical SPDIF port to work! I bought a cable and connected the computer to my Sony MD-player and attempted to copy my CDs onto MD. I go into the MSI control panel and check the box to enable SPDIF-out, removing the speaker cable from the analog line-out just for good measure. When I plug the optical cable into my MD it recognises digital input and prepares for recording. I press record on the MD and play on the computer's CD-player app, but the MD LED shows "no signal". I'm pretty sure both the MD recorder and cable are OK since I've used them to copy CDs from a Kenwood portable CD-player quite recently, so it must be the MB that's giving me problems. Indeed, when I've stopped playback in the CD-player app and went back into the audio control panel, I found that the SPDIF box had been unchecked of its own accord. I've tried this several times, and I've unplugged the S-bracket and reinstalled it all over again just to make sure it was plugged in properly, and I still get the same problem. All audio works fine except optical out! Haven't got a coaxial cable or recorder so I can't check if the coaxial port is equally buggered or if it's just the optical, but I'm getting really annoyed here: this was the one feature I liked best about this board and the only one which isn't working! Any ideas, anyone?

dude, i think i can get u ur signal, but currently i can only get silent recordings, u may have better luck.
on the minidisc, there should be a switch or button that will toggle synchronised recording on and off, turning it off should get u a signal, but it wont be in sync wiv the cd, ie u cant trust it to form track gaps.
hope that helps, done flame me if it dont, if i manage to get substance to my recording, i will send u the info just in case.
take it easy

MSI Kt4 Ultra - Sound on Board

Hello, I have a problem with my onBoard sound.
Sry for my english, I am german.
I have a SB Live Volue soundcard and i want to install it, but when i deactivate the onBoard sound i cant't delete the drivers from it.
Pls, help, how can I deactivate the Sound-on-board, and install my other soundcard right ?
Pls, when someone is German here, write in german.
thx.

Yes, I disabled it in "Integrated Peripherals" the "Serial ATA Controller" and the "Audio Controller".
Is there someone more, I have to disable ?!
Or have I to deactivate it on the mainboard, too ?!
And how can I delete the drivers from Windows ?!
This drivers are:
Audiocodecs
Legacy-Audiotreiber
Mediensteuerungsgerät
Vidiocodecs
I have Windows XP and Win2k, because I use Partition Magic and Boot Magic.
MSI KT4-Ultra
Athlon XP 2000+
GeForce4 MX 440
256 DDR Samsung 333Mhz
SB Live 1024
Midi Tower 350 Watt

MSI KT4 Ultra based sys crashing/rebooting

Just Built a brand new machine with a KT4 Ultra, Athlon XP2000+, 512MB Corsair PC3200 Stick, ATi Radeon 8500 DV (64MB) card and a giant special edition hard drive from WD.
Love everything about the system - except it is clearly not functioning properly and I believe that I have isolated the problem down to the MOBO or problems associated there.
Problem is the system crashes in any taxing graphical situation. (Since I've only had it built for about 3-4 days, now, I only have a few fairly limited examples so bear wtih me.)
2-3 minutes into either Quake III or Unreal Tournament 2003 Screen goes black and system crashes - automatically rebooting. Problem also came up while trying to download latest AMD AGP sys file from AMD's site. (That is, so far, the only non-gaming example of this happening).
I have tried absolutely everything I can think of, and even a number of things that a savvy friend of mine could think of. Anyone else having this problem? Anyone got any ideas at all, here. Because this has got me totally frustrated.
Thanks,
Ben

Quote
Originally posted by wonkanoby
tried newest bios,claims fix for 8500
whats combined watts of your psu 3.3 and 5 v,asmps those 2 voltages as well
BIOS is still what came with the board. I have only seen that the first version of this BIOS is available. I have looked for updated versions but I only see 1.0. Is there another version of this BIOS available? I would certainly love to try if it does exist.

MSI KT4 ULTRA-BFISR + Ati Radeon 9700 pro = not good??

Hello everybody!
First of all, i youst have to say that i think MSI have the best motherboards....
Here's the problem (i haven't buyed anything yet!):
I am going to buy MSI KT4 ULTRA-BFISR and ATI Radeon 9700 Pro, but i have read many places that Radeon aint working with MSI KT4-based cards! Im am going to buy an 520W Power (i aint so good in english so i hope you now what i write :D )
I am also going to buy 2 x Cosair pc3500 xms ram... Is this one working with the motherboard by the way?
But my question is: Will the Ati Radeon 9700 pro work with this card? (i must remember to buy the 1.3 version!) I am gonna get my Radeon 9700 pro from USA, how can i now when i order that is an 1.3 card?
Thank you for answering! :]

I think also that even there is two drivers, that is not a reaseon why it isn't work. One time I install only standard VGA drivers, but result was that I got two standard VGA driver. 8o
First time I try without VIA drivers, then with 4.42 and 4.43 VIA drivers. Result was almost same all the time, it always crash when Nature test start, but this exist also to older mobo (Abit KT7A-RAID). Problem exits few games they lock up or stuttering. Ati demos works fine, but one time that car demo stuttering a lot, but I transfer data at same, so I'm not sure what was reason.
This moment I don't have possibilities to try Hyperion 4.45 drivers or something else, because it's my friend computer.
MSI KT4V 6712 (Bios 1.0)
AMD Athlon 1.2
512 MB DDR 333 RAM
SoundBlaster Live
ATI Radeon 9700 Pro (Club3D)
Power 300W
Realtek Ethernet card
Samsung 40GB harddrive
Samsung DVD
VIA 4.42 and 4.43
WIN98

MSI KT4 ULTRA MS-6590

I have this motherboard: MSI KT4 ULTRA MS-6590 sempron and I have already bought the new CPU SEMPRON (AMD Sempron 2400+). I want to know if my motherboard is compatible with new CPU.
Thank you
Sorry for my English, but I'm Italian.

Hi
Not according to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=356&kind=1

MSI KT4 ULTRA MAX VCORE

Is it possible for MSI to add higher Vcore settings with a BIOS update? The MSI KT4 ULTRA has a max Vcore of 1.85 which doesn't really help the overclockers much. If they could get the max Vcore to 2.00 that would be great for XP overclockers. )

I'm not complaining about my KT4 ULTRA. I think its a good board for people who aren't really into overclocking and performance tweaks, but I love to tweak the performance of my rig. I hate to say that other motherboard companies seem to get the picture, that they should make their boards as overclocking friendly as possible. ASUS, Abit, Epox etc. are considered the best because they have conquered into the overclocking market. I wish MSI would throw their hat in the same market because I personally feel they can.

MSI KT4 Ultra-SR (MS-6590) And IDE3

Rig is As Follows:
MSI KT4 Ultra-SR (MS-6590)
AMD Athlon 1000Mhz :(
512MB DDR333 (PC2700) x1 stick
MSI GeoForce 4 Ti4200 8)
IDE1: Western Digital 40Gb 5400rpm (win xp pr) as master & Maxtor 80Gb 7200rpm as slave
IDE2: Liteon 52x24x52 CD-RW ) as master & Samsung 12x DVD as slave.
Soundblaster 5.1 Live PCI
350w Power Supply
MSI D-Bracket 2 & S-Breackets Fitted Also.
I have Three Questions.
>My CPU has a FSB of 200, but the bios (version that came with board) shows it as 100 FSB. See here for athlon bus speeds
Is it ok to increase the bus speed without damaging the processor.
>The two brackets that i have fitted (s and d brackets) do not work. Why?
>What are the optimal and settings for my ram (PC2700 512MB DDR) and GFX Card (MSI GF4 TI4200).
>Oh yeah, my CPU is now operating at a higher temp than before (using old K7VZA ECS Mobo) @ 50-55. Is this normal??
Sorry for the n00b questions, it's just that this is the first time iv ever taken my PC to pieces and re-configured it myself :P
Thanks in advance. -RjA

I can help a little 1000MHZ AMD chip=200FSB XP CPUs=266FSB this is CPU speed . AMD 1000MHZ CPU needs to run @100FSB where a XP CPU can run @133FSB This is MEMORY speed . Trying to crank that poor old chip up to anything other than 100 will do you NO good. You need to buy a bigger cpu of the XP kind. A lot of the older XPs can be had for a low price. 50c isn't not super hot. My KT4 runs in the 40s. You might want to think about a bigger cpu cooler to bring the temps down a bit. Most of your settings should be left at system default, since you only have a 1000MHZ CPU. When you go up to an XP then you can make a few changes. Regards BIGDADDY51 :D :D

IDE 3 with MSI KT4 Ultra

Similar Messages

Maybe you are looking for