IDE BLOCK ACESS in the MS-6570 K7N2-L (nFORCE 2)

I possess a K7N2-L with chipset nFORCE 2 and vi something in software SANDRA 2004 that it did not please me very. I verified exactly that the access to the hard disk is carried through in 16bits instead of 32bits, with qualified IDE BLOCK. It would like that they verified this together anomaly with the engineering staff and made possible one firmware correcting the problem, therefore will be truth I am not having access the record in its total speed and performance. What nothing it pleases me.
Another curious factor is that raríssimas the times that I bind the computer and this does not give to life signal, forcing me to press it reset or to power to return to its normal state. Stranger not? Somebody could indicate me where to lower bios beta for MSI K7N2-L FSB333? I am consuming fidiciary office to the products of the MSI has 3 years and I can say that they are of congratulations for the quality that is spotless in its products. For this I am here for not leaving this quality to leave the standard that as much I admire in this company.
Where 3 for Athlon 64 754 bolts are the plates mothers with nFORCE? They pardon me for the horrible English!
Been thankful
Possuo uma K7N2-L com chipset nFORCE 2 e vi algo no software SANDRA 2004 que não me agradou muito. Verifiquei que o acesso ao disco rígido é realizado em 16bits ao invés dos 32bits, mesmo com o IDE BLOCK habilitado. Gostaria que verificassem esta anomalia junto com o pessoal de engenharia e possibilitassem um firmware corrigindo o problema, pois se for verdade não estou acessando o disco em sua total velocidade e performance. O que nada me agrada.
Outro fator curioso é que raríssimas as vezes que ligo o computador e esta não dá sinal de vida, forçando-me a apertar o reset ou power para retornar ao seu estado normal. Estranho não??? Alguém poderia me indicar onde baixar bios beta para a MSI K7N2-L FSB333???
Sou consumidor fiel aos produtos da MSI há 3 anos e posso dizer que estão de parabéns pela qualidade que é impecável em seus produtos. Por isto estou aqui para não deixar esta qualidade sair do padrão que tanto admiro nesta empresa.
Onde estão as placas mães com nFORCE 3 para Athlon 64 754 pinos???
Perdoem-me pelo Inglês horrível!
Agradecido
RE: UP
It does not have nothing of missed with my source.
I am with the new update for mine mainboard (3.8).
My source is of 500W.
The configurations are all correct ones.
MSI K7N2-L (FSB333) AXP BARTON 2500+ (FSB333) 1 MODULE OF MEMORY DDR-400 SANSUNG 512MB GF-FX5200 ASUS9520 128MB DDR AGP8X HD MAXTOR DX-740 40GB 2MB CACHE WINDOWS XPSP1 + ALL PRE-SP2 nVIDIA FORCEWARE 52.16 WHQL nVIDIA nFORCE DRIVERS 2.64 WHQL

wrong forum for starters its an nforce not a via
the nforce 2 does not support the athlon 64 you will have to wait for the nforce 3 for that
sandra tells lies my friend about lots of things
andf i suggest you list all hardware
and give max amps 3.3 5 and 12v of your psu Power Supply Guide
so we can get an idea about the booting issue

Similar Messages

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

How to tell if video card works at 8x speed on MS-6570 K7N2-ILSR?

my mobo is MS-6570 K7N2-ILSR with the latest bios update and my video card is ATI READON 9600 236mb 8x agp and windows xp pro sp2.
when installing ATI Catalist v5.9 (the latest), it configures the card at agp speed: OFF.
in the bios, all i have for agp speed is: AGP 8x - enable/disable.
my friend have gigabyte mobo with the same video card and ati catalist configured his video in windows xp pro sp2 at 8x speed.
why ?
is there any configuration i should check in the bios and/or in windows ?

Quote from: Wonkanoby on 07-October-05, 18:22:19
you have to install the gart driver in the nforce drivers packagenVidia Drivers
and best its done before the ati drivers
gart driver ?

What's the difference between K7N2s . . .

What's the difference between the delta series K7N2-L and "regular" K7N2-L (both are model 6570). Is it fsb support?
And then there is the K7N2G and K7N2GM-L.
And then there is the ILSR extension.
Curious as to what the differences between all the K7N2 boards are.

1 fsb 333 fsb 400 for delta,the chip in northbridge is different
2 mostly the board size ones 3 pci ones 5
3 adds 1394 lan and sata raid

Block application until the modification of a File

Hi, I have an application that saves and reads a Hashtable from disk. The code is the next one and it runs fine. However I want to allow two applications reading and saving in the same file (both in java). I want both applications to share the same data. My idea was that before to save the hastable the application reads the hastable from the file and make a new hastable with the information of both. Then the application should save the new hashtable (i know that for a while both application are not sincronized...but it is not important ). The problem is when one application wants to save its hashtable (that has been modified) while the other application is doing the same. I'd like that one application could detect that other application is working the in the file and block itself until the other finishes.
Any idea?
Thanks in advance
Marc
Curent code:
private Hashtable load(File fileDisk)throws Exception{
BufferedInputStream is;
Hashtable hs;
if (fileDisk.length()!=0){
// the file is not empty
is = new BufferedInputStream(new FileInputStream(fileDisk));
ObjectInputStream ois = new ObjectInputStream(is);
hs = (Hashtable) ois.readObject();
ois.close();
else{
hs = new Hashtable();
return hs;

Use Serialization and save yourself a fortune of time.
RE: java.io.Serializable.

I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOne

You need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ?

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

Hi soreankles,
To hide the toolbar in Reader, choose View > Show/Hide > Toolbar Items > Hide Toolbars.
Best,
Sara

How do I block pings from the outside to the ASA 5505 outside interface?

I was asked to block pings from the internet to the outside interface of our ASA-5505 firewall. I found a post that said to enter "icmp deny any outside", however that does not do it.
I created an ACL to try and do the trick, also to no avail:
access-list outside_in extended permit icmp any any echo-reply
access-list outside_in in interface outside
access-group outside_in in interface outside
Anyone have a clue what I'm doing wrong? I'm not the firewall guy as you can tell. :/
Thanks in advance...
Block / Deny ICMP Echo (Ping) on Cisco ASA Outside Interface
Most networks that you protect with a Cisco ASA device, will probably want to deny ICMP (maybe not all ICMP types, but a lot of network admins will want to block ICMP Echo, etc.) on the outside interface. This will make the network harder to find through external enumeration, but not impossible.
ASA5505(config)#icmp deny any outside
You will deny ICMP on the outside interface, but if you include ICMP as a protocol in the default global policy map, you can ping from the inside to any host on the outside, and it will be permitted back through the ASA, as it knows about the previous ICMP “connection

You are allowing echo-reply, thus it will reply to a ping
try this ACL:
icmp deny any echo-reply outside
From:
https://supportforums.cisco.com/thread/223769
Eric

Please give me idea how I highlight the gird row which have

Sir
I have gird with 5 column
Vno
Code
Dept
Date
Amount
Sir my need is which record have above 5000 amount that color read and other color blue
It means above 5000 highlight in grid
Please give me idea how I highlight the gird row which have above 5000 maount
Thank
aamir

PROCEDURE pr_Set_VA (p_VA IN VARCHAR2) IS
v_Feld VARCHAR2 (30);
v_Item VARCHAR2 (61);
v_Block VARCHAR2 (30);
BEGIN
v_Block := :SYSTEM.CURSOR_BLOCK;
v_Feld := Get_Block_Property (v_Block, FIRST_ITEM);
WHILE (v_Feld IS NOT NULL) LOOP
v_Item := v_Block || '.' || v_Feld;
Set_Item_Instance_Property (v_Item, CURRENT_RECORD, VISUAL_ATTRIBUTE, p_VA);
v_Feld := Get_Item_Property (v_Item, NEXTITEM);
END LOOP;
END;

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

Admin totally forgot the password and i've no idea where to reset the password or how to remove the admin so that I can be the admin, but first thing, still the same. PASSWORD -.-

I've no idea how to reset the old password in my macbook pro. Because this is my father gave it to me then even he also forgot the password too! Please I need help! T.T If not I cant download software in this computer. how?
Because even him also forgot which password, and all the password he gave me wasn't log in. Ive no idea what to do already so I've ask community~
Where to totally set a new admin without delete the old admin password?
Can't remember the Old password so how to create a new and delete this?
I need to download something but it keep asking me put in the password but i don't know it and want to delete it.. how?
Please help~~~ Thank you everyone

Reset the password.
For Snow Leopard and earlier:
http://support.apple.com/kb/HT1274?viewlocale=en_US&locale=en_US
For Lion and later:
https://discussions.apple.com/docs/DOC-4101

I gave my father a mini ipad and he forgot the icloud password and the e mail for recovering it. How can I recover the password or create a new one if I have no idea at all of the info he configurated.?? ;(

I gave my father a mini ipad and he forgot the icloud password and the e mail for recovering it. How can I recover the password or create a new one if I have no idea at all of the info he configurated.?? ;(

He will have to contact Apple and speak to someone in account security if he can't recover it at https://iforgot.apple.com/appleid

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

IDE BLOCK ACESS in the MS-6570 K7N2-L (nFORCE 2)

Similar Messages

Maybe you are looking for