IDE CF Reader/Writer Support Q.

I've managed to add support of IDE Compact Flash Readers to Solaris 8 x86. Required changes to Solaris sources are minimal (available at http://www.solarisworld.net).
Whom of Sun people can I ask to incorporate these changes to Solaris (or to issue
corresponding official patch) ?
Sincerely,
Maxim

Quote
Where can i get a tested hacked bios?
Maybe this could fix my problems. Or the only change is the IDE?
in my trouble shoot guide you will find a link about the hacked bios.
a link to the guide can be found in my signature
the MSI MEGA STICK should also work.
installed usb drivers ?
tried another usb cable ?
tried it on a hub ?
Quote
My optical wireless mouse. When i turns on the computer, it works ok. If i restart, do not work. Restart again, works. And go on... Only this mouse. On this MB.
usb or ps2 ?
if ps2 then switch keyboard/mouse connectors.
Quote
And also with my sound output. The eletrical one (coaxial).
It do not work with my 5.1 home system. It works fine with my old SB Live.
i find this hard to believe also as alot of people can do this.
if you want good help with this then its better to start your own thread instead of hijacking this one.
also less confusing and more easy for us in here.
also you will get better help if you make a signature of what you have.
MSI MEGA STICK
MSI K7N2 Delta ILSR.
windows xp
linux
5.1 home system
this is all the info you provided of what you have and it does not give much to go on.
good luck and you know what to do if you want more help

Similar Messages

How to enable the NTFS Read/Write support without 3rd party software?

Is there a way to enable the NTFS Read/Write support of Mac OS X 10.6.8?

Well, I've used Paragon NTFS, but if you don't want to use 3rd party software, you should do this AT YOUR OWN RISK:
Open Terminal.app (/Applications/Utilities/Terminal)
Type "diskutil info /Volumes/volume_name" and copy the Volume UUID (bunch of numbers).
Backup /etc/fstab if you have it, shouldn't be there in a default install.
Type "sudo nano /etc/fstab".
Type in "UUID=paste_the_uuid_here none ntfs rw" or "LABEL=volume_name none ntfs rw" (if you don't have UUID for the disk).
Repeat for other NTFS partitions.
Save the file (ctrl-x then y) and restart your system.
After reboot, NTFS partitions should natively have read and write support. This works in both 32 and 64-bit kernels. Support is quite good and fast, it even recognizes file attributes such as hidden files.
Good luck!

Does OSX Lion have native ntfs read/write support?

Does OSX Lion have native ntfs read/write support?

There's no way to undo a solved answer...
Mistral73 wrote:
Thanks for your reply maigpl2.
Sorry guys I clicked on "Correct Answer" by mistake. Could someone please tell me how to undo that?
Many thanks

I have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only any idea how can i change it to read & write ?

i have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only
any idea how can i change it to read & write ?

i tried the trial version of tuxera and it gives me the possibility to read & write , Thanx fschweig.
@ Samberl : what is the benifts of keeping my drives on mac format and this SW mediafour i install on my PC to let it write the mac formated HDD ?
is it free ?
all the best
Adiab

Why doesn't Photoshop support read/write of .mpo files?

I am actually blown away that I cannot find a single Photoshop plugin that reads and/or saves .mpo files. Does somebody know why? And why isn't anyone talking about this format? I find it hard to believe that no one in the entire Photoshop Windows forum has ever wondered about Photoshop's complete lack of or interest in support for .mpo files.
If nobody knows how to read/write .mpo files directly through Photoshop, perhaps someone could point me to some documentation for writing a plugin for it. It's a really really simple file format--there's no reason that a plugin shouldn't be available already.
Thanks in advance for your support.
Jase

Well wave of the future or not. its beening pushed hard. That is in a way good for us the consumers.. choice is always good.
3d tv's and monitors require at least 120hz in order to function. what does that mean for people who spend all their time in front of a monitor?
Bringing about the availablilty of 120hz and beyond flat panels.
Many are people are prone to getting migrains due to refresh rates 60 hz or less, Most people getting migrains from sitting at work in front of a 60 hz monitor all day long, and do not even realize it.
I happen to be one of those people who get migrains, especially if I am doing artwork for 8 - 10 hours.
I just picked up a 120 hz monitor like 2 weeks ago cause I am a techno junky and love my toys, it is the asus one that comes with the Nvidia glasses.
There is nothing wrong with my other monitor, a 24 inch HP monitor. Its a 1920 x 1200 5ms responce time 60hz monitor.
I didn't think i would really even notice the difference between a 120 hz and 60 hz monitor.
Boy ohh boy was I ever mistaken about not Noticing. sitting side by side, to me the picture difference is amaizing. Now i have not had an oppertunity to do a real weekend artwork fest but that will come with time.
The 3d features with the glasses on, I think are very cool in games its extreemly noticable since you have more control over what it is you are looking at. I am not sure i would play a game end to end for hours and hours in 3d. i think that would likely make my head explode but we'll see about that too and if not my be running into walls when i am done since you tend to loose perseption. not to mention 3d glassses make it so you see each picture at 60 hz in one eye 60 hz in the other putting you back to a 60 hz refresh and migrains.
anyway way off subject, but to sum it up.
Some good things can come from flavor of the day fads. Grant it some bad some times does too.. i mean look at bell bottoms....

How do I make Read and Write 10 Gold work with Firefox? I have the latest Firefox 10.0.1 but it keeps saying "Please upgrade your version of Mozilla Firefox. The minimum version supported by Read&Write is version 3.0."

I just loaded Moxilla Firefox on my Windows 7 PC today and tried to use my Read and Write 10 Gold text help software but it just does not seem to work with this browser (works fine on Internet Explorer) as it keeps saying "Please upgrade your version of Mozilla Firefox.
The minimum version supported by Read&Write is version 3.0." but this versions is higher than 3.0!

We have a solution available for anyone needing to run Firefox 10 with Read&Write v10 Gold, please email us directly for this temporary resolution- [email protected]

External Optical Drives/DVD and CD Read/Writer

Hello,
My MacBook Pro from late 2007 had a DVD reading/writing problem, Apple Support told me its going to be around US$200.00 for repair.
I was thinking if an external dvd-rom will be better since after paying for repair it will just die anyway, apple ****** rom will die anyway.
So my question is if any external dvd-rom will work, even for bootcamp installation.
Any idea?

Welcome to Apple Discussions!
Just to make sure you don't have a permissions problem causing the read/write problem, open Disk Utility and repair permissions if you haven't already.
I think the main thing to check with an external unit is that it is compatible with any OS you want to run and that there is a way to install it if your internal optical drive is not working. You may need to download the drivers from the manufacturer's web site, so be sure they are available.
Good luck!

DVD-RAM read/write in OSX 10.8.2

I have a number of disks in the DVD-RAM format which are backups from a family member. I need to resurrect this now dated, but still quite effective DVD standard. I have acquired a later Model Matshista (Panasonic) drive, Model SW-9576S, one of their faster and more recent DVD-RAM cartridge drives. It is housed in a new IDE=>USB enclosure. It works fine on my 17" MBP using Win 7 in bootcamp, both reading and writing. I believe I have an OSX software problem, since on the Mac side of the machine, the drive mounts, and files can be seen, but they cannot be read, and I cannot write a file to new media. All of these cartridge DVD-RAM disks come from the factory formatted as "UDF". I tried to format one for the Mac using disk utility, but it did not work, returning a disk error message and not allowing the format.
I know this is supposed to work, and DVD-RAM standard is still supported. It has some advantages, particularly its ability to function as a hard drive with unlimited read/write cycles.
I would be grateful for any help....

DVD-RAM cartridges have a lock button for physical access to read/write. Look for it.
MOST 3rd party DVD recorders from Samsung and others will read/write DVD-RAM in modern units. Check their specs. The Apple Superdrive does NOT work with DVD-RAM
There is more issues about compatibility from the external USB 2.0 drive case onboard chip talking with USB 3.0 machine than with the Panasonic unit.
You can remove the DVD from the case and try using it in the unit as well. The case just functions as an extra protection for fingers and dust.
IF it mounts, work with Disk Utility to check its abilities. If you can see it, and choose to Repair Disk successfully, its working. If it gives you trouble to READ it, try a better enclosure/connection type like those from OWC or Mac knowledgeable sellers.
Regards,

Windows server 2012 R2 does not recognize DVD burner as read/write device

I've seen problem fixes for this on Windows 7 but nothing on 2012 R2.
I changed the drive letter on the server (2012 R2 with all current updates) and now it does not recognize the working DVD burner as a read/write device.
The device does work correctly with other Operating Systems on the same hardware. The box is a Lenovo D30.
Any idea as to how to go about this fix. All Microsoft troubleshooter downloads run and say the problem was corrected but no luck in burning anything.

Hi,
Did you run this?
http://support.microsoft.com/mats/cd_dvd_drive_problems
Regards.
Vivian Wang

Read/Write permissions and saving prevented

Hi!
My hard drive failed last week, and while it was being replaced, the technician backed up the old one, replaced all my data onto the new one and upgraded me to 10.4.10, and then repaired permissions. He also replaced my keyboard, which had few to no letters painted on it (again). I'm the only user on this computer.
Most things seem to be working well, but so far I've found that I'm not allowed to access my address book at all -- I'm being 'told' I have no read/write permissions for address book. I am also not allowed to save anything (not print to .pdf, not anything from Appleworks, not from textedit) except email as drafts. I have found a way to get around some of it, by trying to save directly to the hard drive, then I get asked to authenticate with my password, I do and it OKs that individual file. This works maybe 90% of the time, but not always on the first try.
Oh, also I can't run anything in flash (I tried to go to a flash based website and it wouldn't work), and I was not able to download a flash player at all.
Do these issues go together at all? I'm nervous that if I try to fix something, I'll make it worse.
Thanks in advance for any ideas!
iBook G4 Mac OS X (10.4.10)
iBook G4, iMac,

Hi Tttina, it sounds like permissions within your Home folder. To check, create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If that works, then repair the Permissions inside your Home folder:
• Navigate to YourHome/Library.
• Get Info (Command - i) on folders for apps you are having problems with.
• Open the "Ownership & permissions" disclosure triangle.
• Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
• If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to do this is because repairing permissions with Disk Utility (as the tech did) doesn't touch permissions inside your home folder.
-mj
[email protected]

How do you create default Read/Write Permissions for more than 1 user?

My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
Steve

Thanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve

System Folder errors after I changed all permissions on HD to read & write

Hi,
Two things may have caused probs on my new 2010 iMac (Snow Leopard), and Applecare is shut so I would really appreciate some help as I have urgent work.
1) INCORRECT PERMISSIONS
I have been stupid. I clicked on Macintosh HD and changed all permissions to read & write because I wanted to be sure I could open and edit all documents on other computers.
I ran Disk Utility Repair Permissions from the install disc, but I am still getting system error messages, and my HP printer won't work.
The first message, in Repair Permissions, said: Warning: SUID file System/Library/Cores has been modified and will not be repaired. I have read a support doc on this which says no need to worry but I don't like it and would like to fix this.
More importantly, my HP printer won't work, displays error beside the document in print dialogue box.
Deleting the printer and readding it didn't work, so I downloaded new drivers and tried to install them, which is when I got the second system error message: System extension System/Library/Extensions/BJUSBLoad.kext was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for an update.
I checked the permissions on the file and they were still wrong despite Repair Permissions, allowing everyone to read & write. So I have now clicked on the entire System folder and changed the permissions to: System read & write, admin read only, everyone read only.
Will this fix it or do I need to do something else, such as check ownership, to make sure all permissions on the computer are now correct?
2) MEMORY STICK SHUT DOWN MY IMAC
Additionally (though I don't think this had anything to do with my problems), I inserted a Sandisk USB memory stick the other day and it immediately shut down the computer. When I inserted it into my Macbook it initially rejected it and gave me a message saying the device wanted too much power so it had ejected it to prevent damage to my computer. When I tried again it was OK. I totally reformatted the stick in case there was something harmful on it, but should I now bin the stick as faulty? Scared to use it again.
3) IS IT BEST TO REINSTALL ENTIRE SOFTWARE?
If I do a reinstall of all the software from the install disc, will it wipe out all my data, such as Mail, documents, bookmarks and other apps?
I would back-up, but if I try and back up files on my external drive it will automatically do a Time Machine back-up and I don't want to do that in case it backs-up all the corrupted files. Otherwise, I wouldn't mind starting again just to be sure all is well.
Expert advice would be very much appreciated.
Thank you
Sarah

Oh, silly really. I was in a hurry and working on docs that I needed to take to the office and open on another computer there.
But when I checked the permissions on the doc it said I could read & write but everyone else was read only.
I thought if I opened it on another machine I'd be stuck with read only access and not be able to work on there. I think I couldn't change it, so I thought to avoid any future problems like that I would change everything on machine!
Yikes. Won't do that again
Sarah

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

When I open the browser, it says as an alert regarding the profile directory and says that read/write should be changed and it doesn't work then.i uninstalled and re-installed firefox6.0.2.how can i overcome this problem

could not initialize the application's security component .the most likely cause is problems with files in your application's probile directory.please check that this directory had no read/write restrictionsand ur hard disk is not full or close to full .It is recommended that you exit the application and fix the problem.if you continue to use this session ,you mightsee incorrect application behaviour when accessing security features....THIS IS THE ALERT I GET WHENEVER I TRY TO OPEN FIREFOX.

See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

How to programmatically read/write the range of a fieldpoint AI channel using LV

Is there a way to programmatically read/write the range of a fieldpoint AI channel using LV ? The example on NI site only permit you to have the name of the device and channels, not the actual set of the range of measure. Anybody has a VI (LV5.1 please)to share?
Thank you very much

If you are using the FieldPoint VI's (Open, Create Tag, Read, Write, Advise), you do not have the ability to change the range of a channel. If you have a FP-1000 or FP-1001, you can use the Optomux commands as described in the FP-1000/1001 Programmers Reference Manual (FieldPoint Optomux VI's are available at ftp://ftp.ni.com/support/fieldpoint/LVFPOpto/ ).
Alternatively, if you have an ethernet network module and LabVIEW 6i or later, you can use the ethernet configuration VI's that ship with FieldPoint Explorer 3.0.1.
Regards,
Aaron

IDE CF Reader/Writer Support Q.

Similar Messages

Maybe you are looking for