IDE Harddisk and DVD ROM cannot detected by BIOS in K7N2 Delta Series

Does anyone can help...
I have problem with my system, From now on i cannot use my computer because it cannot started the windows. When i checked to the bios there is no detected Harddisk in IDE 0 ( i have 2 harddisk installed), only 1 detected in IDE 1 - only CDRW drive ( for CDRW drive and DVD ROM drive). I checked the power cable to the both Disk drive and Optical drive there is no problem. If i change the master and slave pin the problem stil happen.
I don't know what to do  Please help me.
my system :
MSI K7N2 Delta Series
AMD Athlon XP 1800+
Windows XP Pro SP2

Quote from: ici on 08-February-06, 01:06:02
When problems occur go back to basics.  You stated D: is unreadable but C: partition is readable (if I understood right).
As sharp said use only one stick of ram.  Remove any additional PCI cards installed other than Video.  Do not plug in anything but the hard drive set to master.
Check to see if system will detect.
If at this point it properly detects your drive, check for a boot to windows.  If it boots then remove the hard drive and try just the CD-ROM for detection purposes.  If this detects try them together again, if they fail to detect you most likely have a power supply issue.  And yes, PSU issues can crop up very suddenly.
If this fails take the Hard Drive to a friend and have them test it along with the CD-RW/ROM drives.  If they work there and your issue still persists when you have eliminated all other possible points of failure you probably have a bad motherboard.
Sorry i forgot to tell that the harddisk that the D: cannot unreadable is i check it on other system as a slave.
Okay i will try your suggestion.
Thanks for your comment 

Similar Messages

  • Itunes disables my cd and dvd-rom

    I just downloaded the latest version of Itunes and it disables my cd and dvd-rom drives. Any idea why that is? I'm using a Dell Dimension 4500.

    the new itune block the up and low filter on registry. when it install the burning software. download gears drivers from the net should fix the cd rom,but break itune from burning

  • Satellite p775-s5390 not work fan and harddisk and dvd driver

    hi my lap top toshiba
    model : satellite p775-s5390
    my problem when tarn on laptop not work fan and harddisk and dvd driver but laptop is work data  and after 2 minutes the laptop is turn off becouse the fan not work
    I hope to find a solution to this problem
    thanks

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

    I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

    Mullaly75 wrote:
    I assume u guys don't understand what open source software is
    Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
    Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
    Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
    from http://en.wikipedia.org/wiki/Open_source_software
    Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

  • I cannot see why DVD @CCESS and DVD-ROM content are not working properly

    Hi,
    I am very new to DSP, and I know I am missing a piece of the jigsaw, but I do not know what it is. I used a tutorial from creative cow to try and make the @CCEESS function work, but no dice… for now at least. When I did a build/format (to the HDD) everything went fine. I mounted the image, and I could see the DVD @CCESS folder and the DVD–ROM content on the DVD image. When I went to play the image, the button did not work. The content I am trying to use with @CCESS is a PDF file.
    The tutorial I followed was this: http://library.creativecow.net/articles/alexzander_alex/dvdaccess.php
    By the way, I am using is 4.2.2
    Help or just counsel is appreciated.

    As Eric said - DVD@ccess is really not that useful. It was a way to get documents like PDFs to automatically launch in the application (like Acrobat) when watching a DVD on a computer. Since they can't launch on a set top player the technology was already limited. Then the whole issue of getting it to work on a PC arose - it simply wasn't reliable. I managed to produce one disc that was replicated with @ccess links, but I knew the parameters for it's use in advance and managed to get it to work. It doesn't work on modern machines.
    For a while there was a Sonic app which was much better at getting this sort of thing to work, but you had to work on a OC to set it up. Sonic pulled the app shortly after I bought it (sigh) and never replaced it. The fact is, automating document launches and web links is actually pretty tricky on a DVD, the results were variable and it never really enhanced your discs like you wanted to think it would!
    If all you want to do is include a PDF file on the disc, and alert viewers to it being there, you only need to use the ROM content functions not @ccess, and you can use a menu screen to give instructions to people to let them know how to find it.

  • CD and DVD roms not working

    I have just installed a 845PE Max2 motherboard and 2.4GHz Intel processor.  I have kept my CD writer and DVD from my old machine.
    The PC boots up fine but does not recognise the ROMs at all.
    Anyone any ideas what I could have done wrong?

    May be because
    1) The cable you use is a hard-drive 80- conductor cable, do not use this cable for Cd-drives, use an ATA-33 Spec cable, conductor-40 for Cd-rom drives and other drives not capabale of ata-66 or higher.
    2) The cable may not be polarised and you have put the cable round the wrong way
    3) Both of the drives could be slaves/masters/or on cable select. Choose ONE to be the master and ONE to be the slave device.
    4) You have not given the drives a power-source (by plugging them into the psu! ) )

  • IDVD slide shows and DVD ROM contents?

    No problem making slide shows, but iDVD will not copy ALL of the hi-res pics, seems to have a mind of its own and drops short. ie. 3 slide shows of 100 pics each it will copy 87, 55, 85 hi-res pics only. 5 slide shows of 100 each it will copy 80, 52, 85, 88, 90 hi-res pics only. Has anybody got any ideas please.

    George,
    iDVD isn't always happy about working with lots of multi-megapixel images and can't use all the quality. See iDVD 6.0 Help-Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for information on recommended sizes. Things will go a lot faster with the smaller images mentioned in that help file.
    You can always manually add content to the DVD-ROM area. See iDVD 6.0 Help - Adding files to the DVD-ROM portion of a disc at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/74.html
    My recommendation: use 720x540 images for the slideshow and manually add the high res images to the DVD-ROM area.

  • Mac OS X 10.6.8 is running slow and DVD Rom not working

    Have trouble with OS X 10.6.8 so i was told to reinstall my os from the original DVD but my dvd rom is not responding.  I put cd or dvd in and it just spits it right back out.  HELP IS NEEDED

    Try and clean the lens.  Use a DVD lens cleaning disk or wrap a business cards with a fine micro fiber cloth (eyeglasses cleaning cloth) and carefully insert it into the slot.
    If no success, replace the DVD drive or connect an external one via USB.
    Ciao.

  • I purchased recently an ipad 2 wi-fi 3G and the device cannot detect any network, I turned the wi-fi on and reset the network, but still cannot detect the network

    dear friend
    I recently purchased an ipad 2 wi-fi 3G. the device cannot detect any network, I do not know why. I tried to reset the network, but without any vail. could you please tell me what the setps so I can solve the problem. Another problem, I connected the ipad device with cable to my pc, but the pc is not recognizing the device. The pc only shows the pictures on the ipad.

    lets start easy so the we can understand where you are in the process.  Have you set the ipad up using itunes?  if not, you need to do that first.  make sure your computer has the current i tunes version loaded, then plug the pad into the computer.  What kind of computer you using, mac or pc?
    If you haven't set it up, then it does not know to look for any networks.

  • HP Pavilion dv9700 CD/DVD ROM not found in BIOS or device manager

    HP Pavilion dv9715nr entertainment notebook PC.
    Originally running Windows Vista Home Premium, 32-bit OS.
    Computer recently began running very slowly/freezing/hanging during normal use.
    To combat freezing/hanging, mistakenly performed system restore instead of simple recovery.
    After system restore:
    CD/DVD player did not work.
    CD/DVD player no longer listed in Device Manager.
    CD/DVD player listed in BIOS as ATAPI/CD/DVD ROM Drive, not as TS-L632 as installed.
    Updated all available drivers from HP website, including:
    Vista Home Premium SP2
    Phoenix BIOS to version F34(?)
    CD/DVD player still not listed in device manager.
    CD/DVD player still does not work.
    Removed CD/DVD player from laptop and re-installed, hoping to reseat it. Failed.
    Tried Mr. Fix-It. Failed.
    Followed every similar thread, tried all fixes listed in this forum. Failed.
    During boot-up, CD/DVD player makes two (2) distinct "bumps" as if loading or trying to spin.
    Any help in getting the CD/DVD player reinstalled and operating will be appreciated.
    Thank you.

    Hi
    Please find the link given below try this if this does not work then you might have to reinstall Operating system and order a new drive.
    Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • K7N2 Delta Series and hdd problem

    10 HDD's in machine, about 3 TB (1 TB Lacie external hdd included)
    Secondary slave had 160 GB Samsung SP model and it showed it as 130 gb
    (and rest is "blank" and can not been formatted or anything)
    I thought it went broken (1 year old and no problems before)
    I tried it in another computer and it showed all 160 GB.... Strange.. 
    Now i got new same kind 160 GB Samsung and it is just 131 069,3 MB
    It just maximum i can now make a partition.. Where is rest of my 160 GB disk ?
    What is wrong now.. newest bios, Windows 2000 SP 4 with all updates,
    did mobo just broke ? 

    its not mobo problem. its OS related. all delta series works fine no problem with any hdd's
    this links must be usefull for  you:
    http://support.microsoft.com/?id=305098

  • CD and DVD rom not functioning

    My Thinkpad z60m 2530-38U, I upgraded it to Vista Home Premium and to a bigger hard disk; everything worked fine, until I noticed that I am unable to read or write CD's or DVD's. I have obtained help from this forum before, and I'd appreciate if anybody can share with me a possible solution for this problem. Thanks 
    Solved!
    Go to Solution.

    Try reseating the drive first. Then go to this Microsoft site and run the "FixIt" utility:
    http://support.microsoft.com/kb/314060
    Let me know if this corrects your problem
    Cheers,
    Mark
     Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

  • H67MA-ED55 DVD-ROM drive detection

    When I first put this system together everything worked perfectly.  I took the system apart to do some much needed cable management.  Ever since then the Motherboard wil NOT recognise a ROM drive.  I thought it might have been a coinsidence that the drive or cable just happened to fail at that exact time.  So I've tried 3 or 4 different cables, plugged into different SATA ports and even went out and got another drive to try.  Nothing has worked so far.  Installed the original drive in another PC and it works fine.  At a loss now, MSI said to update BIOS, The drive worked for OS and all other software installation, now it wont even show up in BIOS.
    Please help..
    Thanks,
         Mike

    Quote from: heymike_s on 01-February-11, 06:58:44
    Turns out it was the case design that was causing the problem.  The Zalman HTPC case was keeping the drive eject button continuously pressed.  Apparently this causes a fault condition in the drive that won't allow it to communicate with the board.  Once the drive position was fine tuned the problem was no more.
    Thanks for the update. It really does provide a help for others that may experience a similar or identical problem.  

  • Pc with windows 7 and itunes (latest) cannot detect my iphone 4 ios 7.0.6(11b651) ,

    anyone can help?

    Hello ibebry
    Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file. 
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Regards,
    -Norm G.

  • 7.5 and 5.5 BIOS for K7N2 DELTA released

    Just enter this link:
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436

    Extended test ended up going back to 193x11.5 (2222)
    Crashed in looping of demo 3Dmark2001SE after 45 mins.
    Noticed my Nostromo game pad not being reconized , lights stayed on(not good)USB
    Backed up fsb a couple notches to stable again. All is good
    passing all extended test.
    gained 1 fsb from 192 to 193. I'll still take it.
    keeping low Volts
    CPU 1.7
    Dram 2.6
    Aggressive memory timings 2-2-2-6
    Sis Sandra still showing above stock 3200 400fsb speeds in benches
    Memory Bandwidth  2913
                      2733
    Arithmetic        8125
    Temps:
          System   33C
          CPU      36C
          Power    35C  ( all after benching)

Maybe you are looking for