IDE/PATA HDD UltraBay adapter for T61?

What is the part number for the UltraBay adapter that fits the T61 and accepts IDE/PATA hard disks?

the Z60 uses SATA hdd, so anything in 2.5 inch and 9.5 mm thickness format is okay, currently 640 gig is the largest.
Lenovo's figure are based on the largest hdd that was available when they released the machine, they don't update these value when new parts come out.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Z60m Ultrabay Adapter for HDD

Hello all,
i'm looking for an Ultrabay adapter for HDD to extend my Z60m-system.
At the lenovo-website, I found an adapter that sould, according to the description, fit into my system.
Ultrabay Adapter
Has anyone experience with this model?
My second question is: What is the maximum HDD-size (GB) that can I use there?
In the specifications of the Z60-models, I found the information, that the system is limited to a maximum HDD-capacity of 100GB, or did I misunderstand that?
Hard drive features:
Standard 40GB, 60GB, 80GB, or 100GB hard drive sizes
Specifications Z60
Do I have to consider this restriction at the "primary HDD-Slot" AND the Ultrabay-HDD-Slot ?
Thank you.
Geetings
Cypher

the Z60 uses SATA hdd, so anything in 2.5 inch and 9.5 mm thickness format is okay, currently 640 gig is the largest.
Lenovo's figure are based on the largest hdd that was available when they released the machine, they don't update these value when new parts come out.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Did someone check Parallel/Serial Ultrabay Slim Adapter for T61 on T400

Just a simple question. I need a serial adapter and the Parallel/Serial Ultrabay Slim Adapter is for me the best solution. If it really looks nice doesn't matter.
I just want to know if it works.
http://ivoidwarranties.blogspot.com/2008/08/thinkpad-serial-parallel-port-bay.html
Thank you.
Salzmilch
Message Edited by Salzmilch on 05-19-2009 10:40 PM
Edit: Okay, it seems that Serial Ultra Bay has not the ports as the ultra bay from T6x series. But then is the question, does Lenovo plan to create also this Parallel/Serial Ultrabay Slim Adapter for T400 series?
Message Edited by Salzmilch on 05-19-2009 10:53 PM

Did you investigate if the expresscard converters give you the full RS232 standard you require. The new expresscard slot on the T400 has better performance than USB 2 as it basically attaches directly to the bus.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Ultrabay adapter - HDD doesn't show up

I just bought a new ultrabay adapter for my Thinkpad T400. I put a brand new Toshiba 320GB HDD in it and place into the laptop. The HDD is from another laptop but is still brand new, I bought it from my mate who installed a SSD in his newly bought laptop.
Anyways, when I placed the ultrabay adapter in the laptop with the new HDD I got a message that Windows 7 was installing drivers for the new Toshiba drive, standard procedure. But I don't see anything in My Computer.
The HDD shows up in Device Manager but not in My Computer. See screenshot.
I tried following these instructions with no luck. I also tried updating the BIOS with no luck.
The light on the adapter doesn't turn on - perhaps it's somehow switched off?
Please help...
Solved!
Go to Solution.

Nevermind. I solved the problem. I used Partition Wizard Home Edition to see the disk and created a new NTFS partition on the HDD and assigned a drive letter to it.
Figured I would post the solution here if someone would experience a similar problem.

ThinkPad Ultrabay Adapter

Can anyone tell me if the Ultrabay adapter for the W530 comes with a tray and rubber rails for future HDD installation? Or do I have to purchase those items separately from a retailer like Newmodeus such as this?
Thanks,
W530 2436-CTO, i7-3820QM, Quadro K2000M 1920x1080 FHD Display, 32GB DDR3 1600 RAM, 500GB 7200rpm Hard Disk

glad to help you out.
happy computing!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

12.7mm Ultrabay adapter

So I bought a W530 with the 320GB HDD, and I have the 12.7mm Ultrabay adapter for another hard drive I'm going to install. I'd like to place the other hard drive, an Intel SSD, into the main drive slot, with the HDD in the Ultrabay adapter. I'm not sure what I need - do I just need the 9mm rails for the Intel drive, or do I also need a caddy for the HDD?

aangrist:
What is the size of the HDD, 7mm or 9.5? If it's the 7mm you will need the adaptor rails in order for it to fit properly.
http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD022801
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

Re : T400 2764CTO, 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bay

What is the part # for the 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bayCan you also confirm it is a SATA connection, I have already been sent an IBM P/N 41U3148 which has the IDE connection and appears not to fit.
Thanks for help

shan_mcarthur wrote:
Actually, it is entirely accurate. Here is another related thread with a lot of pictures that demonstrate the problem. I have 3 Lenovo W520s and 3 useless Lenovo Ultramedia bay adapters. I cannot tolerate the gap because it causes frequent drive dismounts when I pick up the laptop when it is running or even touching the side. The newmodeus adapters I purchased to replace the defective Lenovo adapters have been rock solid! I recommend visiting all the picture links on this thread. It will clearly demonstrate the problem:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Will-Hard-Drive-Bay-Adapter-II-two-work-in-W52...
Shan, it isn't entirely correct because we have a lot of W510 and W520 users in my company this doesn't occur with. I am not discounting the problem. I only take exception to the statement that blankets ALL users and ALL hard drive adaptors. Doing that is incorrect.

T61 and SATA Ultrabay adapter

Over the course of several months and with different versions of Windows, I've tried to get my T61 (8891) to work properly with the SATA Ultrabay adapter.
With some SATA drives, it seems to _almost_ work - it will be recognized properly and even read the file system, but there is still enough of a glitch that files get corrupted.
On my most recent attempt and with most previous attempts, the Ultrabay and main HDD LEDs just light up solid and the drive in the Ultrabay is never recognized at all. My most recent try was with a Seagate ST9500420ASG. I did try limiting the speed to 1.5 using a jumper on the drive, but that didn't make any difference.
I am able to use PATA drives in the PATA Ultrabay adapter just fine - no problems at all.
This is a pretty big limitation, though, because all the new faster and higher capacity drives are SATA in addition to all SSDs being SATA.
Has anyone else had a similar problem? Any help appreciated.
Thanks,
Michael

Kevin,
Thanks for the suggestion. Unfortunately I've tried several times with drives formatted or cloned first in USB enclosures, but none of them have worked properly.
Some drives do seem to work better than others. I have had marginal success with a couple of drives in that it will read the file system and the Ultrabay drive access light doesn't stay on constantly. However, there still seems to be an issue with even these drives.
For most drives I've tried, the drive is not recognized at all and / or the Ultrabay HDD access LED lights up constantly, which can't be good.
It appears that Lenovo has sold promoted and sold hardware that is not actually compatible, at least with some T61s. It is listed as compatible with my T61 (8891-CTO), but has never worked properly. I even ordered and tried another Ultrabay SATA adapter thinking something might be wrong with that particular adapter, but neither one works properly.
Thanks,
Michael

ThinkPad 2nd HDD Adapter for T40 -do I need to configure the hard drive?

I purchased a new Samsung HM160HC hard drive and a Thinkpad 2nd HDD adapter for Ultrabay slim for a Thinkpad T40. When I install the PATA hard drive into the adapter do I need to configure the hard drive as slave, cable select, or leave as master? Any help would be appreciated.

Reformat usiing the original install disc then update to v10.6.8.
Mac OS X 10.6: Reinstalling Mac OS X

EBay Ultrabay adapter reporting SATA I with OEM Seagate 500gig HDD installed

I purchased -THIS- recently and when I installed it along with the OEM 500GB Seagate HDD (which is SATA II), RST is only reporting it as operating at SATA I (1.5 Gb/sec). I then removed the HDD from the adapter and put it back into the main spot and RST then correctly reported it as a SATA II drive.
Have any of you come across this when using similar eBay Ultrabay adapters? I am thinking about trying another one on eBay, but don't know if I want to take the chance or not. Has anybody purchased a Ultrabay adapter off of eBay and having it report the correct SATA interface for an OEM SATA II HDD?
BTW, I have a W520
thanks!

I'd like to confirm JRHawk9's comments. The HDD in the internal bay reports SATA-300/Sata 2, but in the UltraBay reports SATA-150/Sata 1. This is wrong. Bottom line, if I put a SATA 2 device into a SATA 3 connector, it should be reported as a SATA 2 device.
I have also conducted some performance benchmarks against the HDD in both locations. For large file transfers, the speeds are the same. However, for small file I/O (clearly the norm for most computers), the HDD on a SATA 2 connector (the internal HDD bay in this case), was between 5 - 30% faster.
While neither bay saturated the SATA 1 spec, clearly the HDD properly detected as a SATA 2 device allowed it to perform more small file I/O.
What's wrong here? Why doesn't the Lenovo W520 properly detect the OEM Seagate 500GB drive as SATA 2? BTW, I've contacted Seagate; they tell me it's Lenovo's fault. With the evidence provided here, I have to agree.

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

AC adapter for PX1269E-1G50 external HDD

Hi all,
I have lost the AC adapter for the PX1269E-1G50 external HDD and would like to buy a new one. Does anyone know what the part number is for this adapter, and where to buy it?
Thanks

It is not easy to get this info. Have you maybe users manuals or some other document?
Maybe you can find this info there.
By the way: check the power supply adapter info and maybe you can use some universal one.

2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS. The Hdd is recognized in system profiler. Any ideas?

2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS. The Hdd is recognized in system profiler. Any ideas?

Welcome to Apple Support Communities
The hard drive is not formatted, and it must be formatted in "Mac OS Extended (Journaled)" in order to install OS X.
Close the OS X installer, and go to Utilities menu (on the menu bar) > Disk Utility. Then, format your hard drive in "Mac OS Extended (Journaled)" as Format > http://pondini.org/OSX/DU1.html Finally, close Disk Utility and install OS X

What is the "Ultrabay – hdd / optical" used for? (X230t)

hi,
What is the "Ultrabay – hdd / optical" used for? (X230t)
best regards, tastro

Ultrabay in the Ultrabase Series 3 can be used for Optical Drive and HDD (placed in a ultrabay enhanced hdd caddy).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T520 with HDD Bay adapter

Hei there,
i have seriously problems with the Ultrabay HDD SATA adapter in my new T520. I have a 500 GB Toshiba disk in it and all works fine until i set the machine in sleep. (Close the lid or something else).
After powering up the notebook again the disk is disappeared. And there is obviously no power on the disk either. I have already tried a lot of things to get it back but nothing helps. The only way to get the disk back is to power down the whole machine, remove the adapter, put the adapter back and power on again.
I tried to use the diskupdate.exe in scheduled tasks - it doesn't help.
I tried also to put back the DVD-drive and change the power setup there for the bay - it doesn't help either.
I tried to copy the DVD-link with the power on option on the desktop and use it against the HDD-Bay adapter, nothing happens.
As it is now, the Harddisk is quite useless. Every time when i set the machine in sleep i'm loosing the harddrive connection and have to reboot all. Does anybody have any ide how to solve this problem?
Much thanks for any help
Florian

There have been other threads on powering the Ultrabay. But I am not sure if the solution for this was covered. You could look.
I my opinion there should be a BIOS setting to keep power to the bay all the time. I did see PowerManagement for DVD powered but whether it would help the drive is doubtfull. The Sata is not a hot plug drive and requires a reboot to rediscover it hence the BIOS should maintain control.
Just check and there is "Automatic Power off Optical drive" Enable/Disable in PowerManager under the Systems settings pull down.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

IDE/PATA HDD UltraBay adapter for T61?

Similar Messages

Maybe you are looking for