IDE Showing PIO and Not DMA

Been having a few problems with my HD, I've re-installed Windows, and the latest Hyperion drivers, but the HD is still not performing.
Had a look at the Primary IDE Channal in the device manager, on the Advanced Settings Tab and its set to
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: PIO Mode
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 2
Anyone know how to get device 0 to Ultra DMA Mode?

once my dvd drive stopped working in DMA mode, so i uninstalled the secondary IDE channel in device manager, and when i rebooted winxp reinstalled it and DMA was back on.
what sort of hard drive is it BTW?

Similar Messages

  • How to show embedded and not embedded font in TextField at the same time?

    Hi guys,
    I need to show embedded and not embedded font in my TextField at the same time. TextField has embedFonts = true and isHTML = true.
    Any ideas?

    Two different font won't work for me because I need to support all UTF glyphs.
    Idea with two TextFields one on top of other seems to be working. The only problem I see here - if half string is Chinese and hand Latin - then it will be quite problematic to properly position text...

  • Airport utility only shows disc and not airplay

    airport utility only shows disc and not airplay

    Actually......IF......one is using an older 5.x version of AirPort Utility......AND.....an AirPort Express, a Music icon is displayed at the top of the screen. If you click the Music icon, there are settings to enable AirPlay and establish a password for the service.
    The newer Mac 6.x and iPad and iPhone versions of AirPort Utility automatically enable AirPlay, but display no settings for this.
    Since ralphington is using Mavericks (10.9.4), there are no controls for AirPlay displayed in his version of AirPort Utility.

  • Am using Adobe acrobat for iPad and pictures are showing JPEG and not PDFs

    I Am using Adobe reader for iPad and converted pictures from camera to ipad and pictures are showing JPEG and not pdf

    Hi bsmigs23,
    I'm not sure that I follow. You have the Adobe Reader app for iOS, and converting photos to PDF? Where are the photos showing up as JPEG? Do you see the converted PDFs when you look at the Recents List?
    Best,
    Sara

  • When I send an email, it shows initials and not my name that is sending it, how do i change this?

    When I send an email, it shows initals and not my name that is sending the email, how do I change this?

    Hey samsept3,
    Thanks for the question. I understand you wish to change the display name of your Mail account in OS X. This can be configured in Mail > Preferences > Accounts > [Account Name] > Full Name
    For more information, see the following:
    Mac Basics: Mail (OS X Mountain Lion)
    http://support.apple.com/kb/HT5361
    And for a visual instruction, see this video:
    Mac OS X: Mail Basics
    http://support.apple.com/kb/VI211
    Thanks,
    Matt M.

  • Why are my contacts showing numbers and not names

    Why are my contacts showing numbers and not names?

    When you added your contact details in the contact app did you fill in the fields correctly.  For example in contacts where it says "first" did you enter a number instead of a name?

  • Testing testing. I noticed my actual name shows up and not my screenname. What name do you see me posting as?

    Testing testing. I noticed my actual name shows up and not my screenname. What name do you see me posting as?

    Thanks Sarthak. Oddly, when I am in my edit profile mode and go to view as "dropdown" (choose everyone, registered members) They all show my real name in the sample and not my screen name which I think should be fixed.

  • Showing description and not key when using check tables in Web UI

    Hi,
    I have added an field using EEWB to Opportunity Item, and connected it to check table CRMC_CUSTGRP1. It shows fine, and we can select from the check table using the web ui.
    However it shows the key column and not description column from the table. Is there a way to make the web ui show description instead of the key?
    Regards
    Mattias

    Hi,
    I debugged GET_V_S_STRUCT, and it tries calling 
    ME->VIEW_DESCRIPTOR->GET_FIELD_GEN_VALUEHELP_DL
    ME-VIEW_DESCRIPTOR is an instance of class CL_BSP_DLC_VIEW_DESCRIPTION, which does not contain the method GET_FIELD_GEN_VALUEHELP_DL, and obviously it throws an CX_SY_DYN_CALL_ILLEGAL_METHOD exception, which leaves the value table empty.
    Do you have any idea why, or have I missed something fundamental?
    Regards
    Mattias
    Edited by: Mattias Johansson on Nov 14, 2008 11:05 AM

  • So how do I REALLY get the toolbar buttons to just show icons (and not text)?

    On my Bookmarks toolbar, my bookmarks "buttons" show icon AND text. I just want to show icon, not text. When I go right-click.....customize, the window "customize toolbars" opens. Down in the bottom left corner the "show" option dropdown is already set to "icons" (and only icons). But it's just not so. The toolbar buttons show icons AND text. If I cycle through that dropdown just for kicks, it doesn't change; I can choose "icons (only)" all day long, but the toolbar buttons still show text.

    Either of the following Add-ons allow you to show icons only and/or to have multiple rows on the Bookmarks Toolbar. Set the options on either after installation.
    *Multirow Bookmarks Toolbar Plus - https://addons.mozilla.org/en-US/firefox/addon/multirow-bookmarks-toolbarplus/
    *Roomy Bookmarks Toolbar - https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
    Other - Check your Plugins and update as needed.
    #Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
    #'''''Adobe Shockwave for Director Netscape plug-in, version 11.6.4.634''''' (this old version has security issues)
    #*http://kb.mozillazine.org/Shockwave
    #*Download, save, close all browsers, run the installer you downloaded - http://get.adobe.com/shockwave/thankyou/

  • IPhone messages show numbers and not contact names

    My iPhone in messenger is showing phone numbers and not contacts. My contacts are OK, was working Ok just stopped today. Not sure why?

    huh.. after a lot of experiments it now works
    the contacts in n82 only dsplayed, contacts with names and numbers.. surprisingly when i connected my phone to pc suite and not nseries pc suite and checked the contacts through my computer, i noticed that there were duplicate entries... for all numbers without names
    i deleted them and now its okay
    Thanks anyways

  • Calendar notifications on iPad iOS 8.2 shows yesterday and not today

    Since I updated my iPad to iOS 8.2 my calendar  notifications in the notification centre are showing the wrong day. The calendar summaries for 'Today' and 'Tomorrow' are correct, but the actual calendar details shows me events from yesterday and not today.
    i have tried removing the calendar from notifications, and then adding it back. I have also tried a simple reboot of the iPad. Anyone know why it is doing this? What else can I try to fix this?

    WWhen the iPhone is connected via usb to computer. Look at tones on the device. Does the tone look different from all others, does it have a transparent circle next to the ringtone name?

  • Pavilion DV8000 display screen shows strips and not visible

    My HP Pavilion laptop display screen shows vertical lines - strips and not clear.
    Thanks

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are having issues with the Display of your Notebook. We will surely assist you with this issue
    1. Please check if the Display/Screen of your Notebook shows lines even in BIOS or not
    Note: Power ON the Notebook and keep tapping the F10 Key to access the BIOS
    2. Please tilt the Screen/Display of the Notebook slowly towards back and the front side, check and verify
    if the lines are seen at all the angles of the display
    3. Please connect an external desktop monitor to your Notebook and check if the lines are shown even on the
    external monitor
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • AVI files loaded in Premier Elements 7 only show audio and not video.

    I am a new user of Premier Elements 7 and am having problems getting the video into a new project I set up. I have 6 AVI v1.0 clips that play both audio and video in Windows 7, but when I set up a project and import them, I only get the audio side and not the video side. I can drag the audio to the timeline and can play the audio just fine. But it is missing the video. I must be doing something wrong, but am new enough that I don't know where to turn.
    I have been reading the forums and taking tutorials, so I think I know the steps to import a video into PRE7. I've tried many things, but still no video. I downloaded GSpot and found that my files have video H264 (H.264/MPEG-4 AVC) and audio oxooo2 (ADPCM). The codecs seem to be installed on my Windows 7 computer.
    Can someone point me in the right direction on what to do next. I'm a computer professional with 50 years of experience, so am no dummy, but am new to PRE7. Thanks in advance.

    I found a mini-CD that came with the product. When I loaded it on my computer, one of the options was to install a device driver. I did this and now I can see the video in PRE7. So, I think this solves my problem.
    I applaud the mfgr. of the Insignia. This is the way that it should be with ALL cameras, that do not use a miniDV tape, or precise CODEC, that is mainstream. All too often, the mfgrs. tweak an existing CODEC, and just leave the customer hanging, trying to find a way to edit the footage. A couple of major mfgrs. come immediately to my mind.
    Others, who use CODEC's, like Xvid, that is so heavily compressed, that even converting it to an editable format/CODEC results in such horrible footage, that no one would ever be satisfied with the finished product.
    <Soapbox Mode Off>
    Glad that you are now up and editing. For my education, what does G-Spot say about the CODEC in the Insignia footage? At least next time that I encounter it, I can say - "look in the box, and install the driver to get the CODEC."
    Thanks for reporting,
    Hunt

  • X121e and Windows XP: only PIO mode (not DMA)

    I installed Windows XP on a thinkpad X121e. After actualizing all drivers from Lenovo I found out why the whole system was very slow: The internal hard disk is running only in PIO mode and reaches only 3 MB/s which is far to slow to work. I did not had this issue for years; normally a hard disk should run in DMA mode without any problems.
    I tried several things:
    - deinstalling the driver
    - reinstalling chipset driver)
    - changing the hard disk
    -  resetting the storage controller with a script (dmareset.vbs) found in the net 
    but I did not find any solution. The PIO mode is still on.
    I did install the XP system in SATA legacy (compatibility) mode. I could not try installing windows XP in ACHI mode because I did not find any ACHI driver for this chipset (HM65) at intel (only for Intel 5 series chipset exist F6 driver).  
    What could be the reason for the problem that DMA mode is not recognized by XP? Is it an issue for Lenovo (e.g. Bios update necessary) or does it have to do with Intel (problem with chipset driver)? 
    Thanks for any help,
    Thorsten
    Solved!
    Go to Solution.

    Hi thoral,
    I don't know if it will fix the P-I/O issue, but there is an AHCI driver for your machine on the Lenovo support site:
    Intel SATA Controller AHCI Driver
    Intel SATA Controller AHCI Driver
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How do you see individual tv show episodes and not the cover for the tv show in cover flow?

    I used iFlicks to import some of my TV series to iTunes. I then selected the cover flow view because its easier to see when sitting on the coach. The only problem i've got is that iTunes shows covers for each TV series but I can't seem to find a way to see how many episodes are in a series and how to select that episode. This is specifically for cover flow view. I took screenshot that shows Season 1 of Alphas that consists of 5 episodes:
    [IMG]http://i1219.photobucket.com/albums/dd432/vmoodleyzaf/ScreenShot2011-12-21at1933 27.png[/IMG]
    As you can see in the screenshot, there's no indication of the episodes contained within the series. If anyone has any ideas about this, i'd really appreciate it.

    If you are in Cover Flow view, fullscreen, selecting the cover only plays the first episode of the series. I even tried downloading an entire season from iTunes and it does the same thing. Obviously, iTunes names the episodes and season numbers correctly. If I press the skip button on the remote while watching an episode, it jumps to the next episodes without showing any info about the new episode. Please note that this is in fullscreen mode. If I exit fullscreen mode, then a list of episodes is shown below the cover of the tv show. However, that list is not viewable from a distance.

Maybe you are looking for