IDE (Yellow) Problem with media files

Hi...
When i try to play any media file from the hard disk that is connected to the IDE (Yellow) the file do not play well. The sound is disoriented and the movie freeze for about 2sec. When I connect the same HD to the IDE (Blue) everything is OK.
Also I try to run CoreCenter without any good result... PC Alerts it is telling me that of the voltage is supposed to be between 10.0v to 13.0v and said 5.xxv ???
I already install the new bios. Any ideas?
925x Platinum
P4 550
Kingston 1GB 533mhz (512 x 2)
Turbo-Cool 510 Express
C: - Maxtor 60GB (IDE 1 Blue)
D: - Maxtor 250GB (IDE 1 Blue)
E: - Seagate 80MB (IDE RAID Yellow)
DVD-ROM (IDE RAID Yellow)
MSI XT600 XT
WinXP SP2

Do you have the unreleased BIOS 1.2? Did it fix incorrect temp readings in BIOS?
But anywho, I have a similar problem, media files dont play well, Im connected to the yellow, but it only happens when my DVDburner is working on something, so I cant listen or watch anything when Im burning,
Corecenter doesnt work either, but Ill quote the release notes:
version 1.6.8.0 (6/16/04)
new mainboard :
MS-7053 (ClockGen :ICS 954130BF,Linear over clock , watch-dog , SouthBridge: Intel 82801FB,NorthBridge:Intel 925X)
But now there a new verison 1.7.0.0 of Corecenter so...
But did the 1.2 BIOS fix anything on your computer? Is it more stable?
I think your problem lies in the BIOS, or at least it sounds that way.

Similar Messages

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Problem with .jnlp files

I have an iMac running 10.6.8. I'm having a problem with .jnlp files. I've downloaded two, cgoban.jnlp and gopanda.jnlp. When I double-click the file, nothing happens. If I Control-click and select Open With Java Web Start, same. Nothing happens. Software Update says my Java is up to date. Any ideas?

A few other similar threads were solved by this — I'd like to give credit where credit's due but I can't find the original posting.
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta.p list
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>

        <key>LastModification</key>
        <string>Thu, 31 Jan 2013 04:41:14 GMT</string>
        <key>PlugInBlacklist</key>
        <dict>
                <key>10</key>
                <dict>
                        <key>com.macromedia.Flash Player.plugin</key>
                        <dict>
                                <key>MinimumPlugInBundleVersion</key>
                                <string>11.3.300.271</string>
                        </dict>

                </dict>
        </dict>
        <key>Version</key>
        <integer>2028</integer>
</dict>
</plist>

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Problem with URL File download

Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
     boolean isSuccess = false;
     public JarDownloader(String url)
          downloadJar(url);
     public boolean isDownloadingSuccess()
          return isSuccess;
     private File deleteExistingFile(String filename)
          File jarf = new File(filename);
          if(jarf.exists())
               jarf.delete();
          return jarf;
     public static void main(String args[]){
          new JarDownloader("url/filename.extension");
     private void downloadJar(String url)
          try
               URL jarurl = new URL(url);
               URLConnection urlc = jarurl.openConnection();
               urlc.setUseCaches(false);
               urlc.setDefaultUseCaches(false);
               InputStream inst = urlc.getInputStream();
               int totlength = urlc.getContentLength();
               System.out.println("Total length "+totlength);
               // If the size is less than 10 kb that means the linkis wrong
               if(totlength<=10*1024)throw new Exception("Wrong Link");
               JFrame jw =new JFrame("Livehelp-Download");
               JPanel jp =new JPanel();
               jp.setLayout(null);
               JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
               jl.setBounds(10,10,200,50);
               jp.add(jl);
               JProgressBar jpbar = new JProgressBar(0,totlength);
               jpbar.setBorderPainted(true);
               jpbar.setStringPainted(true);
               jpbar.setBounds(10,70,200,30);
               jpbar.setBackground(Color.BLUE);
               jp.add(jpbar);
               jw.setContentPane(jp);
               jw.pack();
               jw.setResizable(false);
               jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
               jw.setLocationRelativeTo(null);
               jw.setSize(220,150);
               jw.setVisible(true);
               int readlngth=0;
               int position=0;
               byte[] readbytes = new byte[totlength];
               while(totlength-position > 0)
                    readlngth = inst.read(readbytes,position,totlength-position);
                    position+=readlngth;
                    jpbar.setValue(position);
               File jarf = deleteExistingFile(filename);
               jarf.createNewFile();
               //FileWriter fwriter=new FileWriter(jarf,true);
               FileOutputStream fout = new FileOutputStream(jarf,true);
               DataOutputStream dout = new DataOutputStream(fout);
               dout.write(readbytes);
               dout.flush();
               dout.close();
               inst.close();
               jw.setVisible(false);
               jw.dispose();
               isSuccess=true;
          }catch(Exception ex)
               isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help me

I think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?

Problem with .sitx files (Safari but not Firefox???)

Hi All,
I have a website online (with help from iWeb and BBEdit) but am having a problem I cant figure out (this IS my first website!)
I am hoping that someone much more knowledgeable than me can help me with it.
I basically have a download section. Icons and desktops.
Now, when I (or anyone else) tries to download- everything seems to be fine in FireFox (even IE!) but not in Safari.
My desktops are compressed as .zip files. No problems there, everyone can download and open (including Safari users!)
My icons are compressed as .sitx files. This is where the problems come in. Firefox and IE download them no problem ('save to disk?' etc) However when one attempts to download the icons (.sitx files) with Safari it simply displays pages of gibberish (starting with the word 'Stuffit') which I am presuming is Safari trying to 'display' the contents of the actual stuffit file.
Why is this? Why wont safari simply download the .sitx files as it does .zip files?
Does Safari have some sort of inherent problem with .sitx files? Is it some sort of configuration within Safari preferences? or (and probably most likely!) is it something I have done wrong?
Oh, my website (page in question!) can be found here:
http://aoimedia.co.uk/news/news.html
Thanks in advance for all your valuable help
Kind regards
John
12 G4 Powerbook/Superdrive. (she's named Skates!) Mac OS X (10.4.4)

Hi,
It sounds like the server the website/file is hosted on is not identifying the type correctly. As you've seen, different browsers will handle this situation differently.
Have a read of this article:
http://www.macosxhints.com/article.php?story=20040211102018600
Hope that helps.

Problems with updating files in the cloud

problems with updating files in the cloud

What kind of problems?
Have you recently upgraded to iCloud Drive on your iOS devices with iOS 8?
Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004

Migration Jdev 11.1.1.1 to Jdev 1.1.2, IDE visual problems with ADF design

Migration Jdev 11.1.1.1 to Jdev 1.1.2, IDE visual problems with ADF design
CONTEXT
I’ve been working my project with Jdev11.1.1.1, when I migrate to JDev 11.1.1.2. I realized that my project didn’t compile successfully as before besides I couldn’t see the design view in a WYSIWYG mode on my JSF pages.
I had installed (initially) in C:\oracle\Middleware Jdev 11.1.1.1 with WLS 10.3 (default in Installer)
A couple days ago I realized about the new Jdev release JDev 11.1.1.2 and I decided to migrate because of the IDE improvements such as Bugs Solutions, Maven support, code templates, etc).
The new version seemed to be non-compatible with WLS 10.3 because I couldn’t mount it in the same middleware so I installed the new one in C:\oracle\Middleware11g2, JDev 11.1.1.2 with WLS 10.3.1 (default in Installer).
EXAMPLE
I have created a new sample Project named JDev112App, it only has 1 java class, 1 ADF template and 1 JSPx to show the errors and differences between releases of the IDE… However, I also have added the screenshots of the Project in each IDE, also I have included a screenshot of my real project (Business App).
NOTE. Business APP project is under subversion SVN and the migration was done successfully when JDEv 11.1.1.2 opened it (it migrated automatically).
What should I do?? .. thanks
Best Regards,
Screenshot1
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15778
Screenshot2
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15779
Example APP
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15784

I think that the problem could be preferences/settings migration from Jdev 11.1.1.1.0 to JDev 11.1.1.2.0, because I migrated not only the application but also the JDev preferences ( "Documents&Settings...Jdeveloper..." ).
I have installed in a new machine without previous version of Jdev the new release JDev 11.1.1.2.0 and when I deploy my test application with errors ( showed in this post ), it works fine and also the design view is correct.
I am not SURE but I think the bug or problem could be also the preference/settings migration between JdeveloperS.
Can anybody tell me the real reason?? How can I fix it ... I don’t want to import each of my settings manually in JDev 11.1.1.2.0 ( I mean templates, javadocs settings, connections, repositories, etc).
Thanks in advance for your help,

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

IDE (Yellow) Problem with media files

Similar Messages

Maybe you are looking for