Idea - dt2w when charging (dock / usb)

I had an idea that I wish was implemented in the smart connect app. Just want to see how many others feel the same way.
When connected to a charging dock ( or any charging method) there should be an option in smart connect events to enable/disable double tap to wake.
The feature is there for us to use in settings- > display
How many of you find it weird to turn on and off the phone when docked in the cradle or plugged in through usb?

Could you elaborate, are you saying that double tap to wake doesn't work while the phone is charging either through the regular cable and/or Dock? because it should work. 
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Get "using too much power" message when charging with USB

    I have a 4th gens iPod Touch that appears to have a number of issues:
    1. get "using too much power" message when charging with USB
    2. can't re-boot
    3. unable to access iCloud Backup, Ignore and Settings button inactive
    4. unable to unlock unit when using the Home button to turn the unit on

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Do I have to eject my Iphone 5 when charging via USB?

    I know pulling my older shuffle out of the dock (without using eject button) can create a need for a reset, but can I just unplug my Iphone 5 without using the powering on the monitor and hunting down the eject button after I have been simply charging?
    A step further, if I actually sync'd the Iphone to add media and I know the sync is long done, do I still have to power on my display and hunt down that eject button?
    Just trying to establish proper habits for the daily future use.  Thanks for any replies.

    Well, I know it couldn't hurt (properly ejecting) but I am looking for a definitive answer of "yes" I have to do this and this is why.  Thanks for your answer, but powering on my display (HDTV) takes 30 seconds and doing this twice a day for two years will really take the life out of the display when I might not need to.  Not trying to be argumentative, just want to find something more official and couldn't find it on the site.  Thank You

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • Iphone 3gs keeps rebooting often when charging on Kensington Dock n Belkin

    I recently bought a Kensington Dock and a Belkin FM transmitter *** car charger for my Iphone 3gs (OS 4). When charging on the dock the phone keeps rebooting often. It doesnt happen if I'm just charging the phone using the regular charger OR when USB connected to the computer. Can someone advise why this happens when charging the Iphone using a Kensington dock OR belkin FM transmiter *** car charger. Both accessories are suppposed to be compatible with Iphone 3gs.

    Hate to say, but if your phone has been rebooted, restored or recovered.  It sounds like a hardware issue.  Send it to the refuribish line with the rest of them.   Now i know you said you restored it.  but there are a couple other ways of doing it that might help.
    1. Reboot methods. The first thing to do is try to reboot the iPhone, which you can do by holding the top button and the home button for about ten seconds. In some cases, the iPhone is actually still on, but a bug stops the screen from displaying anything, so you can reverse the problem by doing the reboot. If you still see nothing on the screen, try to plug the iPhone in and again try the reboot methods to see if you can get the screen to display.
    2. Restoring the iPhone. If the iPhone shows up in iTunes, but it still doesn't seem to turn on, it's definitely a display problem. When rebooting fails, you can restore the iPhone from iTunes, and this should fix whatever bugs caused the original issue. Realize that you'll have to reload your music if you restore to another software version. To restore, plug the iPhone in, go into iTunes and click the iPhone's icon on the side of the select screen. Click on the restore button and agree to the prompt asking if you really want to restore the iPhone's software.
    3. Recovery mode. You can put the iPhone into recovery mode if it has a charged battery by holding down the home button before connecting it to iTunes, then continuing to hold the button until iTunes recognizes that the iPhone's in recovery mode. Recovery mode is a bare-bones way of booting the iPhone that allows you to perform a restore when you're dealing with a serious issue such as the iPhone failing to turn on or display anything on its screen.
    try one of these if you havent already.  if still nothing, its time to take it in or get a new phone. 

  • USB connection kit with Charging Dock connector?

    Hey guys,
    I am planning on buying the Apple USB dock connector in order to connect a midi device to my iPad to use with music apps. Im afraid of the battery dying as I'm recording and editing though and was wondering if anyone knew of a cable that also allowed me to plug the charging dock cable into my iPad at the same time as the USB?
    A bit like a USB+DockConnector---> Dock connector cable?
    Thanks alot,
    Aaron.

    Googling "Camera connection kit" or searching eBay for the same finds many third-party connectors that appear to do what you want, such as this, but I have no idea as to quality or functionality. At least they're cheap enough not to worry about wasting significant money finding out.

  • I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
    I've had mixed luck with lexar, some work, some don't.
    I did have good luck with an older 4 gig geek squad one.
    Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
    For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • Ipod touch keeps shutting off even when charged help!!! any ideas?

    My ipod keeps randomly shutting off while in use even when charged any ideas why this is happening?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • How can I turn off charging via usb of my iphone 4s when I connect it to my computer?

    how can I turn off charging via usb of my iphone 4s when I connect it to my computer?

    You cannot.
    Why would you want such a thing?

  • "Radiosveglia Philips Dual Dock Triple Charging" or "Radiosveglia FM iPL10 Dual Charging Stereo con dock Lightning di iHome con funzione Charge/Play USB"????   I HAVE I PHONE 4 S

    Vorrei regalare una radiosveglia docking per I-PHONE 4S
    Radiosveglia Philips Dual Dock Triple Charging"   OPPURE  "Radiosveglia FM iPL10 Dual Charging Stereo con dock Lightning di iHome con funzione Charge/Play USB"?
    Se il possessore cambia e acquista un I-PHONE 5S, esiste un adattatore per le docking?
    I would like to give a clock radio dock for I-PHONE 4S
    Philips Clock Radio Dual Charging Dock Triple "    or    " iPL10 FM Clock Radio with Dual Charging Dock Stereo iHome with Lightning Charge function / Play USB "?
    If the owner changes and buy an I-PHONE 5S, there is an adapter for the dock?

  • Ipod wont charge when connected by USB

    My ipod doesn't charge when i connect via USB but will charge on Firewire..?? is this normal??

    My ipod doesn't charge when i connect via USB but
    will charge on Firewire..?? is this normal??
    I assume that you are referring to the ipod being plugged into your Mac when charging. The Mac cannot be in "sleep" mode if you want to charge the ipod by plugging into USB. However the Mac can be in "sleep" if you plug into the Firewire port. The reason is that the FireWire port is powered while the USB is not when the Mac is asleep.
    BTW you can charge via the USB 1 and not just USB 2. I have a 4G ipod that will charge when connect to my older iBook (2002 model) that only has USB 1.
    iBook   Mac OS X (10.4.3)  

  • Apple charge me twice for the bill when I order usb cable and power adapter, what should I do now ?

    Apple charge me twice for the bill when I order usb cable and power adapter, what should I do now ?
    they charge me separated for the cable & adapter , and charge 51.36$ for the full bill !!!
    order number *****
    <Edited by Host>

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..

  • Use DK39 charging dock when using a SCR12 cover on my Z2 tablet?

    Can I use the DK39 charging dock when using a SCR12 cover on my Z2 tablet?
    Thanks in advance

    2) that is normal if you want the home launcher to rotate without the need of the dock or magnetic cable you'll need to download a third party home launcher.

  • When will Apple release a charging dock made for the 4G phone?

    I just bought a 3G iPhone. I am now finding that there is no charging dock (white or black)available. How can that be. Am I the only one that would like to set my phone in a dock by my bed (or by my computer at work)rather than just laying it down. I have been reading that you can use iPod docks that might work. You can use docks for the orginal phone and grind it down to fit. What a joke.
    Lots of money for a phone that you can't find use with a dock. Duh!

    there are products for that all you need to do is to go the apple online or reailer and ask for a dock they have been making them for some time now and i own two
    here are some of many
    http://store.apple.com/us/product/MB125G/A?fnode=home/shopiphone/iphone_accessories/cablesdocks&mco=NTQyNjk
    http://store.apple.com/us/product/TR330LL/A?fnode=home/shopiphone/iphone_accessories/cablesdocks&mco=NjUzNjg1
    http://store.apple.com/us/product/TQ219LL/A?fnode=home/shopiphone/iphoneaccessories/speakers&mco=MTA5MTEz
    http://store.apple.com/us/product/MA944LL/A?fnode=home/shopiphone/iphone_accessories/cablesdocks&mco=MTQ2Mzk
    http://store.apple.com/us/product/MB484G/A?fnode=home/shopiphone/iphone_accessories/cablesdocks&mco=MTI3Mzc4MQ

Maybe you are looking for

  • Keynote and adobe presenter

    Is there a software product that will do the same job as adobe presenter, but work with a mac and keynote? Thanks Georgia

  • Relationship between PRPS and FPLT table

    How to arrive to a billing plan in FPLT table with project ID or WBS ID in PRPS table. Thanks, Vaishnavi

  • Acrobat & Gotham OTF printing issues

    This isn't the first time I have had problems with the Gotham OTF font family. In the past it would crash large Indesign CS4 files I was working on. Deleting the Indesign font list file seemed to help fix the problem. Now I have run into yet another

  • ABAP Proxy on XI System itself?

    Hi all! I was wondering whether it is possible to use an ABAP Inbound Proxy that is located on the XI system itself (e.g. for getting some additional data out of the SAP database as you would do via RFC function modules)? How does the XI react if it

  • User exits in BW reporting

    Please search the forums before posting Hi all, Can any body send me the example userexits in BW? plz send me some example scenarios and codes for that. Thanks , jack Edited by: Arun Varadarajan on Dec 12, 2008 7:38 PM