Idea tab a3000 and video output

Hi all,
I would know if on this tablet is possible to stream a video output to a tv (hdmi output or others standard is possible?)
Thanks for replies

as an a3000 owner that issue has came up with mine try resetting ur machine and selecting it back to auto rotate on issue should its self if not find a repair tech buy DO NOT use lenovo they will mess it up and refuse to fix it they have had mine for a month and refuse to fix there screw up also don't use geeksquad all they will do is over charge you and send it to lenovo so try a local shop or something if the previously stated fix does not  work

Similar Messages

  • Strange export result in FCP 7- audio and video output not in sync anymore

    I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
    Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
    What could that be ?

    Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync.  And one section of tape which I captured twice was in sync on one clip and out of sync on the other.  So it can't be the tapes.
    Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

  • Idea Tab A3000, Driver Problem

    Hi.. I have two major issue for my Idae Tab 3000H having double SIM without calling facility.
    1) My Idea pad A3000H is not installing while connecting to the USB port in the OFF mode. 
    2) Though the hardware is there but I couldnot call as there is no calling facility even with double SIM.
    Both the problems are quite irritating as I couldnot access programs like whatsapp. Please suggest me the remedy of my problems (problem 1 and problem 2)

    It's distinguishing feature is the dual SIM card function - a rare find in tablets. 
    The latest firmware version is 131112 with full Call(voice) functions here in the Philippines (I believe in Asia).
    Build number
    A3000_A422_009_020_131112_WW_CALL_FUSE
    You can connect A3000 to the PC's port with the cable provided for data transferring with the PC. There are 3 connection methods available, USB storage, Media device (MTP) and Camera (PTP)
    Go to Settings
    Developer options
    Check USB debugging
    back to Settings
    Storage
    tap 3 vertical square's icon(Advanced menu) on top left
    tap USB computer connection
    CONNECT AS:
    -USB storage
    -Media device
    -Camera
    System
    Microsoft Windows XP
    Professional ver 2002
    While it works for me, I cannot guarantee It'll work for you. I hope it does.

  • Idea tab A3000 Streaming live TV

    I have dipped my toe into the tablet water, with the A3000 for the specific purpose of streaming live TV and online video to my TV via a dongle.
    I have BT infinity WIFI with a excelant signal and 24.6Mb download speed.
    You tube and other online video works with no problems at all, no buffering, no drop outs.
    I have tried the following apps:-
    BBCi player (including the required plug in)
    TV catchup
    TV guide
    They all do the same thing, the live program plays for around 2 minutes then either the picture dissapears, it buffers or an error message comes up.
    Is there a setting I need to change in the tablet menu? Any help appreciated.

    I had a go with my UK spec A3000, I have the same problem on iPlayer but not on TVcatchup or SkyGo, playing the same BBC streams. iPlayer was fine on non-live video. I tried BBC1 and BBCnews. Since I use TVcatchup or SkyGo for most of my tablet based watching I had never experienced the problem until you drew it my my attention.
    Table firmware is A3000_A422_003_026_130823_WW_SMS_FUSE
    Internet connection is Sky ADSL, 23Mb clocking rate to the exchange (I'm only 200 meters away).
    I'll watch out for this in the future.

  • Idea Tab A3000-H Display problem

    I have a problem with my display only color diplay on my A3000-h
    only  red,green,blue, white and black...can you help me how to fix this problem...

    anyone can help to my problem on my lenevo...

  • Satellite R830 and video output through HDMI

    Just wondered if it's normal for my laptop to output a max of 1280x768 through HDMI to my 26" LCD TV?
    Its a Satellite R830 i3 with hd3000 graphics. I have 8GB RAM. Tried under Windows 7 and 8 but the same.
    Also tried custom resolution but it just says on the TV out of range.
    Mt graphics driver is up to date and I had full hd working on this TV via another older laptop.
    Any suggestions please?

    I dont know your LCD TV specifications but fact is that external resolution depends on three options:
    graphic card driver, graphic card and the external device connected to notebook/computer.
    So if your TV does not support an higher resolution, you will not be able to choose another resolution.
    If your TV supports higher resolution but the graphic card driver and graphic chip would not support higher resolution, you will also not be able to use it.

  • Idea Tab A3000 can't read SIM 1

    I have just recently passed this table to my kid to use. It was working flawlessly for me since i had it. Both the sim card 1 and 2 worked. The 3g and the 2g worked.
    Yesterday i had a full factory reset before giving it to my daughter. When we put her simcard in slot one. It keeps saying that there is no sim. So we tried putting it in sim 2. It worked! But she wants 3g, 2g is something she can't live with lol. Then we put it back to sim 1. Still not detecting
    We took her brother's sim card and put it in slot 1. It worked! With 3g all functioning. But when we put her sim inside again to slot 1. It was still not detecting
    We just came back from requesting a new sim card for her number. It still doesnt work.. OH GOOD HEAVENS. I am about to loose my mind. What could be wrong?
    I don't think the sim tray is faulty coz it reads mine and my son's sim card perfectly. I don't think its the sim thats faulty, we just changed it to a new one! 
    Can anyone help me?

    i found out by chance that the Skype extension was causing this problem when I uninstalled it because of problems with Google Maps. Now all is OK.

  • Media Live multiple video output

    I am considering buying a Media Live barebone as my HTPC.  The only thing holding me back is determining whether or not I am able to output to 2 different monitors as 2 separate displays.
    My goal is to mount a touchscreen monitor (encased in a custom picture frame) on a wall to act as a hub for my media center.  It would connect to the Media Live HTPC via VGA to show the XP MCE interface.  I would be able to control audio and video from this monitor.  Also, when not in use, it would scroll through pictures in the screen saver.  The HTPC would then connect to my receiver via HDMI.  It would output audio and video to my LCD TV.
    So basically, what I am looking to do, is control audio and video output to my TV from my touchscreen monitor.  If this is not possible, I could deal with displaying the same output on both the touchscreen and the TV, however I wish to use HDMI to keep high quality output.  So, I run in to the issue of my touchscreen monitor not having an HDMI port.
    Any ideas?

    I am not absolutely sure if I got you right, but the MSI Media Live barebone IS able to run two displays at the same time. I have got my HDTV connected via HDMI (signal passed through my Yamaha RX-V863 receiver) and a small touchscreen display via VGA, too at the same time. I think they cannot show different information at the same time but you can clone the screen on both displays.
    You just should not forget that most VGA displays cannot show full HD resolution, so if you do not own a receiver for upscaling your HDMI signal to full HD you will have to enjoy your video on TV in the same resolution as on the VGA touchscreen (mostly 800x600 pixels => 720p). But with a AV receiver connected for upscaling the signal you can show information on a small touchscreen and (cloned) information on your HD TV in full HD at the same time.
    There is only one thing that sucks: If you want to switch off or on your TV while the barebone is already running, you will get a video driver error since you "unplug" or "plug"  a non usb device while the system is running. So the video driver will be restored and you will have to repeat the procedure of activating the TV output and cloning the touchscreen's signal onto the TV (if you have bad luck you will even have to reboot the system before you can use the TV for cloned video output since the OS will not recognize the TV any more without a restart). By the way you can avoid this problem when you are using a AV receiver by keeping the receiver switched on while the barebone is switched on because then the output source will not vanish and Windows will be "satisfied".

  • Video Output from compressor is still fuzzy and delayed on my site

    My web video output is choppy and pixelated and I'm shooting on an excellent HD camera 1080i
    I setup compressor for HD 564X960 and the output is 78Mb (this is a 1 minute and 32 seconds video)
    I then us flash to convert it to a Flash 8 high quality flv
    the result is crap. Its blurred and choppy on my site. I just watched the HD presentation on the new SDK for iPhone and the window was huge and the quality was fantastic?
    What's the secret ?

    sgribber wrote:
    My web video output is choppy and pixelated and I'm shooting on an excellent HD camera 1080i
    I setup compressor for HD 564X960 and the output is 78Mb (this is a 1 minute and 32 seconds video)
    I then us flash to convert it to a Flash 8 high quality flv
    the result is crap. Its blurred and choppy on my site. I just watched the HD presentation on the new SDK for iPhone and the window was huge and the quality was fantastic?
    Ok, a number of problems here.
    First are you using Compressor to compress your video, then Flash to compress it again to a FLV? If so, that is causing a lot of your problems right there. You are double compressing a video (never a good idea). Take you uncompressed video file into Flash and create your FLV.
    Second, you are using Flash to compress your video. Flash is horrible at compression. Sorenson Squeeze will produce much better results. Or if you are creating H.264 files, just use Compressor to create a H.264 file and then change the extension to .flv
    Finally, if the quality is bad then you might need to increase the bitrate. What did you set your bitrate to?

  • Mailbox effect between shared and quicktime video output

    Here are some screenshots from a movie I'm making. You'll see the kid doing the limbo in the clip at the centre of the top image is mailboxed with black top and bottom. I've added some type to the frame (lower portion of bottom screenshot) and it looks like it'll fall outside the image, but when I export the movie as a medium shared video, it turns out fine (upper part of bottom screenshot).  Make sense? I can't figure out why this is happening and where the edges of my frame are. The problem gets serious if I export to Qucktime because the mailbox effect shows while it doesn't show in the medium shared video output.
    Any advice appreciated.

    Hi this worked for me... After you've changed the stuff within the browser close it out completely, Open the actual QuickTime on your PC edit-preferences then you will see both player and QuickTime separately. You need to uncheck automatically start play in both preferences, in the second one it has a browser tab when you click that the default is set checked for automatically play in browser uncheck that go through each tab in both preferences and make sure autoplay is not enabled anywhere, Good luck Rhondar35

  • Render tab thumbnail (and output) is very different from the viewer in main color tab.

    I'm having a really strange issue with one of my projects. I can't seem to output my footage correctly as seen in the "color" tab in speedgrade. The result is much more blue in hue.
    Color tab main viewer:
    Render tab thumbnail:
    As you can see the thumbnail is much colder than the main color tab viewer, and the final output (both DPX and proRes4444) is just like the thumbnail.
    Has anyone here experienced this issue? Is it a known bug? Workaround?
    I should mention that I'm working with several gradinglayers. 5 to be exact, doing different adjustments. Does this potential bug have to do with that?
    Thank you,
    Joan

    For starters, it would be good to know which version (especially a build number) you're using of SpeedGrade. You're clearly running in "native" mode to render directly from Sg but could be doing that in anything from the ol' Iridas through CS6 SpeedGrade to a CC version. There are some few changes that came in along the line. Subtle mostly. But useful to know.
    It would also be handy to know the codec/s you're grading, and any out-board devices you might have in the video chain from AJA, Kona, MB, whoever ...
    I've had gamma shifts at times that were a PAIN to nail down, but I've not had color/hue shifts so much. At least, while there was a slight change in color/hue of a render at the wrong gamma, once I'd corrected the export settings to get the correct gamma the color/hue problems disappeared. There is a very experienced user of Sg for years who might be good at helping ... if Joost van der Hoeven is available.
    Neil

  • How do I clean my mid 2007 iMac? The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!

    How do I clean my mid 2007 iMac?
         The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!                              
                                       If you have an idea please respond!

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Removing Music Box and Video Box Queue from Safari Window tab

    Hi,
    I  had  earlier  installed  two  applications  :  Music  Box  and  Video  Box.
    Since  I  don't  use  them  often  I  removed  them  from  my  Macbook.
    But  after  removing  these  applications,  I  noticed  two  of  these  Annoying  options
    on  Safari > Window  tab  (toolbar).
    Any  ideas  of  removing  them ?  Altough  they  don't  affect  my  system;  it  really  isn't  nice  to  see  them
    there  as  the  applications  itself  is  gone.
    Thanks.

    Did those applications come with an uninstaller? If so, did you use it to uninstall the apps?
    If you did, please let the developer know that their uninstaller didn't work.
    If they didn't provide an uninstaller, send a nasty-gram asking them to please do in the future.
    I'm not familiar with those programs and don't know where something might install in order to alter the app like that except the Safari Extensions which you can access from the Safari Preferences.

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.

Maybe you are looking for