Ideacenter k330 Motherboard Upgrade options

Are there any lenovo supported Ideacenter k330 Motherboard Upgrade options?
If not, Is there any reason why I would not be able to simply replace the OEM motherboard with
Brand X's motherboard. I have heard that the Processor might be locked. I have never heard of such
a thing in the past and would

Well, you can replace the motherboard with one from R51 with Intel graphics, nice project that will give you a reliable machine...
http://forum.thinkpads.com/viewtopic.php?f=2&t=65505
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

T41 motherboard upgrade options?

My T41 motherboard is dead.
As a hobby I would like to upgrade it back to life.
Is this possible?
Please reply and include advice/opinions/reasons/links on how to/suggestions, etc
All suggestions are greatly appreciated. TIA

Well, you can replace the motherboard with one from R51 with Intel graphics, nice project that will give you a reliable machine...
http://forum.thinkpads.com/viewtopic.php?f=2&t=65505
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

CPU and motherboard upgrades for DV7-2278ca

Hi
I have a DV-2278ca laptop with Intel Core™2 Quad Q9100 2.26-GHz with 12-MB L2 cache and 1066-MHz FSB and ATI Mobility Radeon HD 4650 discrete graphics subsystem and 1-GB of dedicated memory.
I want to upgrade them to something that uses second/third generation INTEL (I5/I7)
Is it possible? if yes what are my options?
Thanks!

I am going to be honest here. The chances of upgrading those components is very low and not very likely to work with that notebook case.
A second generation Core i5/i7 process is two generations away from the current processor which will require a motherboard upgrade. I'm certain you are aware of this since you mention upgrading the CPU and the motherboard. This is an issue since the case for the notebook was specifically matched to the motherboard it came with. It is possible that finding one that supports what you want and fits that case will be challenging. It can also add up in cost and risk. Risk being the components just don't work or a different feature of the notebook doesn't work any more.
I did do some research to find other posts, in this forum and outside this forum, where others have successfully changed those components. I found plenty on replacing it with the same motherboard, but none that were specifically upgrading it. Perhaps I did not use the right search terms. Notebooks are generally intended to be as they are configured with limited upgrades available for the hard drive and RAM.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

E520 CPU upgrade options?

Hello.
Hopefully a simple question. What are my upgrade options from the B950 CPU?
I need to implement a VM environment and unfortunately the B950 doesnt support VT-x. Is the board in this i3 compatible?
Ta muchly.

I have same question I have e520 with 04W0466 motherboard and B810 Celeron CPU, is it support i5 CPU from another e520 with 04W0398 motherboard?

P6804 Motherboard Upgrade

I have an HP p6804 desktop computer that I was wanting to run Flight Simulator X on. I need to upgrade the motherboard in order to upgrade the video card. Does anyone know a list of compatible motherboards that will work, if any?

The End of Life Cycle has finally struck your a1520n (circa 2006) WIN XP machine. As WIN XP is no longer supported by Microsoft updates, it would be foolish to persue any build based on WIN XP, IMHO. The processor is based on the 939 chip, and the max upgrade is only 15% in speed, but that chip is no longer stocked. (based on search by other members). If you only have 1GB of otherboard RAM, then a meager upgrade to four 1GB modules will give you some limited increase in potential. Cost $46 plus shipping.
Now that you have been told this scenerio, let's be adaptive: You can still go to WIN7 (valid until 2020)
(1)http://www.howtogeek.com/172243/windows-xp-users-here-are-your-upgrade-options/
(2) The a1520n driver page supports WIN 7 32 bit (that is all you need with the added RAM modules.
(3) MS did support a WIN7 advisor page. Maybe it's still valid.
(4) You still need a XP Easy Transfer program (free) and purchase of WIN7 , either upgrade or OEM. $75-100.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

If apple bring out a new ipad after i purchase, is there an upgrade option available?

if i was to buy an ipad 2 today and in a months time the ipad 3 came out, would apple provide an upgrade option to upgrade to the new one??

They have never done so in the past, and I doubt that they would in the future. All that you've been able to do with Apple is return it for a full refund if it was within the returns timescale, and then buy a new one instead

Missing the visual upgrade option on SP 2010 site

I have a series of content databases that were upgraded from MOSS 2007. Most have not yet undergone the visual upgrade.
Today, I have been working on copying two of those sites to a new location.
I created two new team sites. These of course already had the visual upgrade.
I did an export-spweb of the two old sites. I then did an import-spweb of the two old sites into the new sites that I created.
The result is the two old style GUI in the new location.
When I took a look at the site settings (as a farm admin) I do not see an option to perform the visual upgrade on the sites.
I know that there are powershell commands that I can execute when the time is right.
I don't understand, however, where the visual upgrade option went.
Hmm - I just went back to the original sites that were copied and they too do not have the visual upgrade option in the site settings.
The top level site does, however, have that option.
Odd...

But export-spsite won't help.
1. These sites were being copied from one part of a site collection tree to another branch in the same site collection.
2. As I mentioned at the end of my posting, it turns out that the original sites had also lost their visual upgrade menu item - how, I do not know.
Because of these two factors - and maybe others - I was hoping there was a "simple fix" for this. But if there is not, then I just have to live wtih that.

Hey, I have an unopened iPad mini that I won at work and I'm wondering if there's an upgrade option where I can exchange this for an iPad mini with retina display? Thanks

Hey, I have an unopened iPad mini that I won at work and I'm wondering if there's an upgrade option where I can exchange this for an iPad mini with retina display? Thanks

Take it to an Apple store and ask. All they can do is say no. They may ask for a purchase receipt to make sure it's not stolen.
 Cheers, Tom

Why is it that the new macbook pro processor upgrade option only offers up to 2.8 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz Intel Dual Core i7 Macbook, is the new one tuned to go much faster anyway?

Why is it that the new Macbook Pro processor upgrade option only offers up to 2.8 Ghz boosting to 3.3 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz boosting to 3.6 Ghz Intel Dual Core i7 Macbook, is the new one tuned somehow to go much faster anyway, or will the new one be slower in fact? Or does the solid state drive compensate for the lack of increased processor capacity?

The CPU's come from different Intel 'families'. The older ones are 'Ivy Bridge' and the newer ones are 'Haswell'. Numbers alone will not determine the efficiency of CPU.
Ciao.

Any "discounted upgrade" option for new Acrobat 9 buyers when X is released?

I'm looking at buying Acrobat and as of right now, I notice that Adobe's website is only promoting the pre-ordering of version X (I can't even find an option to buy version 9 on here but can find it on Amazon and stuff).
I need to purchase a version of the software ASAP, but I'm just wondering: If I were to buy 9 now (right before release of X) is Adobe going to have an upgrade option that will allow me to upgrade to X without having to pay full price for the software? I'm looking at getting the highest level option (the $800 one).
Hopefully I posted this in the right section of the forum...
Thanks.

Thank you, George.
So, in other words, that means if I buy now through Amazon, I won't get the upgrade option (since it's a 3rd part site), despite the new release announcement, correct?
Is there a link anywhere on Adobe to buy version 9 now so I do qualify for the X upgrade? I can't seem to find one...

Solaris 10 upgrade from 9 - Upgrade option not presented

I have moved the system disk from a v880 to a v480 and successfully booted.
I've successfully tested the upgrade using pfinstall.
/usr/sbin/install.d/pfinstall -D /tmp/profile
I had the following text in /tmp/profile
install_type upgrade
root_device /dev/dsk/c1t0d0s0
This finished with:
Test run complete. Exit status 0.
I had to mount /dev/dsk/c1t0d0s0 to /a before running pfinstall otherwise the program would fail with Exit status 2.
Original slice layout is:
# df -h | grep c1t0
/dev/dsk/c1t0d0s0 9.8G 4.2G 5.6G 43% /
/dev/dsk/c1t0d0s3 9.8G 3.7G 6.1G 38% /usr
/dev/dsk/c1t0d0s4 9.8G 3.9G 5.9G 40% /var
/dev/dsk/c1t0d0s5 9.8G 1.8G 8.0G 19% /opt
/dev/dsk/c1t0d0s6 20G 2.0G 18G 11% /export/home
Because of http://docs.sun.com/app/docs/doc/820-4041/6nfhjnlao?l=Ja&a=view
I moved var from slice 3 to / on slice 0
I also removed "swap" entries in vfstab, and even removed the second disk in the system (which didn't have an OS)
ok> boot cdrom - nowin
this results with no upgrade option presented
Can someone tell me what I can do? I don't have experience with Jumpstart or Live upgrade
Thanks

Hi,
Yes and no.
11gR1 and 11gR2 are fully supported (premier support). 10gR1 and 10gR2 are in extended support. About 9.2 it's a bit more complicated and the general extended support ended : check note 161818.1 for further details.
After the extended support there is still the sustaining support.
Read that to understand the notions :
http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
Best regards
Phil

How to update SP2010 sites that are missing the Visual Upgrade options

So, we are moving towards upgrading some SP 2010 sites that are currently using the old SP 2007 look and feel so that they have the new ribbon Visual Upgrade.
For some reason, some of these sites do not have the Site Actions > Visual Upgrade option nor do they have the Site Actions > Site Settings > Visual Upgrade link.
Does anyone know what can be done to make those available?
Thank you.

Even when I take a look at
http://myfarm/sites/Support/dept1/_layouts/prjsetng.aspx?Source=http%3A%2F%2Fmyfarm%2Fsites%2FSupport%2Fdept1%2FPages%2Fdefault%2Easpx
which is where the site actions > visual upgrade link should take the user, that page does not have the visual upgrade options on it.

Cannot find "JPD Document Upgrader options"

When I upgraded application from weblogic8.1 to weblogic10.2,the application exist jpd ,dft and xq files. I want to upgrade them with tools, but I cannot find the “JPD Document Upgrader options” item. Does any one know why "JPD Document Upgrader options” do not appear in the upgrade wizard?
Edited by: user13316052 on 2010-6-23 上午2:26

detail log info as below:
!SESSION 2010-10-01 22:20:22.672 -----------------------------------------------
eclipse.buildId=M20080221-1800
java.version=1.6.0_05
java.vendor=BEA Systems, Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=zh_CN
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY com.bea.workshop.upgrade81 <ERROR> 2010-10-01 22:22:04.438
!MESSAGE Failed to create upgrader instance for com.bea.wli.ide.upgrade.JPDDocumentUpgrade.

HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
Try disabling the computer's security software during the download and update.

ORA-39700: database must be opened with UPGRADE option

Dear buddies,
I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.
Should I be running pupbld?
Could this problem be due to some opatch?
Here is a part of my alert log:
Thread 1 opened at log sequence 1050
Current log# 3 seq# 1050 mem# 0: D:\ORACLE\DATA\MIG\LOG_03.DBF
Successful open of redo thread 1
Wed Aug 11 13:35:15 2010
MTTR advisory is disabled because either FAST_START_IO_TARGET or LOG_CHECKPOINT_INTERVAL is set
Wed Aug 11 13:35:15 2010
SMON: enabling cache recovery
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\udump\mig_ora_1564.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Aug 11 13:35:16 2010
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_pmon_3088.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_reco_1868.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_psp0_2624.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_mman_3312.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_dbw0_2304.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_lgwr_552.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:16 2010
Errors in file d:\oracle\admin\mig\bdump\mig_ckpt_2300.trc:
ORA-00704: bootstrap process failure
Wed Aug 11 13:35:17 2010
Errors in file d:\oracle\admin\mig\bdump\mig_smon_2136.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 1564
ORA-1092 signalled during: ALTER DATABASE OPEN...
Please comment.
Thanks.
Nith

I just opened my database : startup upgrade and it started up.
But couldn't perform a backup.As you said you have started the DB in upgrade mode and trying to take the backup of database. I think you can't take the backup of DB in upgrade mode.Please shut it down first and start up it in normal mode and do the backup.
Which backup strategy you are following?
What you exactly want to do upgrade the database or trying to take a bcakup?

Ideacenter k330 Motherboard Upgrade options

Similar Messages

Maybe you are looking for