IdeaCentre B320 black screen

My Ideacentre B320 gets a black screen on startup but I can hear Windows starting normally and when I try the TV I only get the Lenovo logo screen and nothing else. I found a post from someone with the exact same problem but with a B340. It turned out to be the scalar board on the B340 - unfortunately the B320 does not have a scalar board. Does anyone know what the equivalent would be on the B320? Any help is greatly appreciated.

from the moment you turn on your pc do you get any images?
if you are getting an image and have a usb stick about you could try a linux live cd/usb and see if its your current install of windows causing the problem http://www.porteus.org/
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Similar Messages

  • Ideacentre H505s: Windows 8.1 black screen

    Hi mates,
    I have upgraded my W8 (OEM) to W8.1. After I login to my account it will show me a black screen with mouse cursor only.
    I have already read discussions about black screen and upgraded W8.1 but advice with safe-mode and disabled graphic driver is not working...
    Could you anybody help me?
    I don´t have instalation medium or system backup :-(
    Thanks!

    Hi Joaquinc,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that same issue has occurred in your H505s Desktop. Please perform OSRI (Operating System) as informed earlier in the post to check the issue, using “Lenovo Rescue System”. Click here to download User Guide and perform OSRI (Operating System Re-Install) refer page no.16 for the steps to perform OSRI.
    NOTE:  Performing OSRI will erase all the data in the computer completely.
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • T61p exhibiting 1 long and 2 short beep and black screen

    All,
    There have been multiple discussions over the past months concerning a 1 long and 2 short beep symptom on some T61 and T61p model systems.   Over the last several weeks members have begun to start additional topics on this theme and cross post between threads.  
    I am consolidating all the threads into this new discussion today.  Since many of these discussions were originally parallel, the dates and some of the context will now appear somewhat out of chronological order.  Please keep that in mind while browsing this thread.
    If you are presently experiencing the 1 long and 2 short beep code with a black screen on boot up, I would recommend that you contact service at this time for assistance.
    UPDATE 1/4/2011
    Previously, I have advised customers to contact service for assistance with the symptoms discussed here. In an effort to maintain customer satisfaction and loyalty, Lenovo has repaired a number of systems as post warranty exceptions. Lenovo will continue the post warranty support; however, with some revisions to the extended coverage effective December 31, 2010.
    Customers who experience these symptoms on qualifying models that are no more than six months beyond expiration of warranty should continue to contact support for assistance. This additional coverage ends March 31, 2011.
    Coverage beyond this date is available under the terms and conditions of extended warranty or maintenance agreements. Warranty extensions may be purchased for systems that are still within the base warranty period, and post warranty maintenance agreements may be purchased to provide coverage after base and extended warranty periods have expired. Extended warranties and maintenance agreements are a great way to ensure coverage for all the major system components.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Solved!
    Go to Solution.

    2 is a coincidence, 3 is a pattern... and your problem is identical to mine, too, and happened just some days after mine did...
    It seems to me, without wanting to be alarmist, that the T61p with the 570M gpu (or a batch of them) is failing with the same exact problem (1 long 2 short = GPU error) at the exact same time... scary thought, really.
    Mine arrived at the lenovo repair center (it's still on warranty) on wednesday, and the status shows as "Repair complete, shipped to customer" as of yesterday. There is no tracking number or "Failing Element / part number" in the status page, tho. It hasn't arrived, either.
    Do you know your planar card / motherboard part number? It would be interesting to know if it's the same as mine (42W7653). Were you affected by the problem shown at http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=30460&view=by_date_a... ?
    And once Mark_Lenovo reads this, Mark, do you need any info? (serial number for the laptop, easyserv reference, etc?) 
    EDIT/UPDATE:
    I called the EasyServ warranty customer support to ask if they had any additional info not in the website, and as a matter of fact they do. The (very, very helpful and nice) man on the phone told me that the motherboard had been replaced and the laptop was due to arrive today, and he gave the UPS tracking number for it, which indeed says it's scheduled to arrive here today, at some point.
    Once it's here I'll update with information about the actual repair and the part number of the new motherboard, etc.
    To be honest  I'm more than pleasantly surprised about the service: the box for shipping my laptop arrived on wednesday, it was picked up that very same day, the laptop was repaired on thursday and arrives to me today, friday. If the laptop works as expected, this is a 10 out of 10 for lenovo customer support, at least for me.
    I'm less-than-happy about the quality of the product, of course, but at least I got the 3-year warranty so lenovo paid for everything. 
    Message Edited by Kry on 04-10-2009 01:18 PM

  • X220 black screen during boot

    Hello,
    It's my first post, so welcome . I've been a lenovo thinkpad user for a month - X220 with SSD, W7 Professional, umts module and extended battery (if more information is needed I can send the full description) - and a strange bug occurs to my new laptop sometimes. After pressing the power button most of controls (camera, speaker mute, microphone mute) always make a flash. Next, most of the times (80-90%) the thinkpad logo shows up and the Windows 7 boots - that's ok. Unfortunately, about one in ten trials end in getting a black screen just after the flashes of the controls. The screen is enabled - it is just black. I must disable laptop (I don't have to keep the power button long - simple pressing is enough), and then, the second trial always succeed. It only occurs during the fresh, full boot - I didn't notice it after restarts, back from sleep or hibernation. I use docking stations, but it occurs in both ways - with or without docking station. It's not a huge problem to ignore that issue, but I'm worried that it may result in a more serious problem in the future. Any ideas and help will be appreciated.
    Best regards,
    Krzysztof
    Solved!
    Go to Solution.

    Hi Krzysztof,
    I would check if the problem exists if you use the HDD which came with your notebook.
    Also check if the SSD is attached firmly to the connector.
    Also try a system check with ThinkVantage Toolbox.
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=LENV-DIAGS#ltb
    If the problem persists with the native HDD like the SSD, then I would contact service.
    kind regards
    Andreas
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Disable the TV features entirely? (IdeaCentre B320)

    Is there a way to disable the TV features on an IdeaCentre B320 entirely?
    I work with a user who is let's just say, not computer-savvy who has a B320. She has has no need for the television functions at all, and is often confused when she accidentally activate it either as PIP or full screen, which happens a LOT more often than you might expect.
    She's not satisfied with the simple path to get back to her Windows desktop, so I'm hoping there's some way to just disable the TV altogether. Can anyone think of a way to do this?

    Some things yoi could try if noone comes up with a defintive answer.
    Try uninstalling drivers and pull the card though have my doubts.  Take away the remote and tape the tv on the side might be easier.

  • IdeaCentre B320 doesn't boot into windows

    When I turn on my brand new IdeaCentre B320 all I get is a "No signal" message. Windows seems to boot in the background (the hard disk indicator LED flashes several times) but nevertheless I'm unable to switch to it.
    The IR remote control doesn't work at all (so that I can't enter the password in the menu) and the PIP button at the side doesn't work either.
    Any help would be much appreciated.

    just had the same happen to me but  had a small screen  on the botom left of the monitor shut down, i went to get a hdmi cable plug it in hdmi out and the other end into a tv  and viola in sending this from my 320e

  • T61 Black Screen after BIOS update

    I have a T61 with Vista.
    I did the lastest BIOS update and it got stuck, my power is fine, my connrection is fine but somehow it got stuck. So i terminated the update (ctrl+alt+del). Then i removed system update, dowloaded it again (3.14) and did a restart.
    So now i turn on my T61, and Windows won't even start. All i see is a black screen and i hear my DVD-Rom running and everything still seems to work but i won't get anything on my screen. I tried pushing F1 but nothing happens, thinkvantage button doesn't work and i removed my battery etc. 

    Hello backstabber,
    it seems you have flashed yout TP to death. One chance, if your cd drive is working till now.
    Try to download bios file as a bootable.iso file burn it to cd and try to flash bios with this bootable disc.
    If nothing happens you have to take it to service and the motherboard would be replaced.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

    HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
    when i open sites in safari the page opens fine if it is not a pdf based page.
    Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
    If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
    I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

    If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

  • Start-up problems, black screen or open firmware

    My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
    When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
    Then I see the error message:
    "Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
    When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
    This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
    I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
    I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
    Any suggestions would be very appreciated.
    Message was edited by: antony chen

    HI,
    *"I get the blue screen with a question marked box."*
    That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
    MemTest
    Boot from your install disk and check the hard disk for errors.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
    If you cannot boot from your install disk, try booting in Safe Mode
    A flashing question mark appears when you start your Mac
    Carolyn

  • My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

    My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

    DonM. wrote:
    Hi
    Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
    Cheers. Don
    No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac  or an Apple refurbished iMac to save money.

  • A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • Recently whenever i plug my ipod nano to my pc the pc shuts down to a blue screen then a black screen  then windows error message i have the latest version of itunes and software i just got this dec 2012

    as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
    thank ycj

    let me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
    i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
    maybe there is some module i should load/unload/reload on hibernate/wake-up?
    here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
    xorg.conf
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Cursor" "SendCoreEvents"
    InputDevice "Stylus" "SendCoreEvents"
    InputDevice "Eraser" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Cursor"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "Mode" "Absolute"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "InputDevice"
    Identifier "Stylus"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "TPCButton" "off"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    Option "Mode" "Absolute"
    EndSection
    Section "InputDevice"
    Identifier "Eraser"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "base"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de, ru"
    Option "XkbVariant" "nodeadkeys, winkeys"
    Option "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    Option "FramebufferCompression" "on"
    Option "AccelMethod" "EXA"
    Option "Tiling" "on"
    Option "TrippleBuffer" "true"
    Option "MigrationHeuristic" "greedy"
    Option "RenderAccel" "true"
    Option "ExaNoComposite" "false"
    Option "EnablePageFlip" "true"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "dri"
    Mode 0666
    EndSection
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Xorg.0.log.old
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) UnloadModule: "mouse"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
    (II) intel(0): [drm] Closed DRM master.
    anyone clue?
    Last edited by lynucs (2009-05-09 18:38:01)

    took a look into everything.log.
    that line looks pretty suspicious:
    kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    it occures around the time i did the last resume.
    here is a relevant snippet from everything.log:
    Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:36:00 thinky acpid: 1 client rule loaded
    Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
    Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
    Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
    Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
    Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
    Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
    Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
    Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
    Apr 14 18:43:07 thinky kernel: Back to C!
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
    Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
    Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
    Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
    Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
    Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
    Apr 14 18:43:07 thinky kernel: Call Trace:
    Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
    Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
    Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
    Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
    Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
    Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
    Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
    Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
    Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
    Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
    Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
    Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
    Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
    Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
    Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
    Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
    Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
    Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
    Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
    Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
    Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
    Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
    Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
    Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
    Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Apr 14 18:43:07 thinky kernel: serial 00:09: activated
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1: EH complete
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
    Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
    Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
    Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:43:07 thinky acpid: 1 client rule loaded
    Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
    Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
    Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
    Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: authenticated
    Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
    Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: authenticated
    Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
    Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: authenticated
    Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
    Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
    Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
    Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

  • [SOLVED] intel 855GM, Xorg 1.6.1 and black screen

    Just installed Arch on my desktop and have the following problem:
    I have generated x.conf.new using X -configure and that resulted in two Device sections for
    cards - "0:2:0" and "0:2:1" Bus ID. With this configuration X refused to load with message
    "Can not set Bus ID", buy either removing section with "0:2:1" completely or by just removing
    "Bus ID" parameter I was able to start X, but it presents only black screen and hangs.
    I have seen several issues like mine on this boards but neither has a solution to fix my problem:
    1) I tried to switch to xf86-video-intel-legacy - same behavior
    2) Tried to use i810 driver instead of intel - "no devices found"
    3) Tried to start X without config file (only using hal) - just hangs badly, black screen and non responsive
    4) Tried disabling autoconfiguration - black screen
    5) Tried disabling DRI - black screen
    6) Tried switching to XAA - black screen
    7) Tried "ForceEnablePipeA "true" - black screen
    8) Tried ignoring one of the monitors using "monitor-VGA", "monitor-LVDS" in device section - black screen
    Anything else I can try? Video Adapter is Intel 82852/855GM at 00:02.0
    Xorg log file with "ModeDebug" true
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 20:32:36 2009
    (++) Using config file: "xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Internal LCD"
    (**) | |-->Device "Card0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
    (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.6.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile IntelВ® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "XAA"
    (**) intel(0): Option "DRI" "False"
    (**) intel(0): Option "ModeDebug" "True"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
    (--) intel(0): Chipset: "852GM/855GM"
    (--) intel(0): Linear framebuffer at 0xF0000000
    (--) intel(0): IO registers at addr 0xFEB00000
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (**) intel(0): Using XAA for acceleration
    (II) intel(0): Hardware state on X startup:
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000000
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x00015455
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x80000668
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
    (II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x00000000 (1, 1)
    (II) intel(0): DSPABASE: 0x00000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
    (II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
    (II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
    (II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
    (II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
    (II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
    (II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x00000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0x2204008e (enabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
    (II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section External VGA
    (**) intel(0): Option "Ignore" "True"
    (II) intel(0): Output LVDS using monitor section Internal LCD
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
    (II) intel(0): I2C bus "DVODDC_D" initialized.
    (II) Loading sub module "sil164"
    (II) LoadModule: "sil164"
    (II) Loading /usr/lib/xorg/modules/drivers//sil164.so
    (II) Module sil164: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7xxx"
    (II) LoadModule: "ch7xxx"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
    (II) Module ch7xxx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ivch"
    (II) LoadModule: "ivch"
    (II) Loading /usr/lib/xorg/modules/drivers//ivch.so
    (II) Module ivch: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_B" initialized.
    (II) Loading sub module "tfp410"
    (II) LoadModule: "tfp410"
    (II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
    (II) Module tfp410: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_B" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7017"
    (II) LoadModule: "ch7017"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
    (II) Module ch7017: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVODDC_D" removed.
    (II) intel(0): Resizable framebuffer: not available (0 2)
    (II) intel(0): EDID for output LVDS
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Printing probed modes for output LVDS
    (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
    (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x600
    (II) intel(0): detected 128 kB GTT.
    (II) intel(0): detected 8060 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 50176 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 200700 kB available
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 131072 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
    (Cannot allocate memory)
    (WW) intel(0): Allocation error, framebuffer compression disabled
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
    (Cannot allocate memory)
    (II) intel(0): Allocating 3072 scanlines for pixmap cache
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
    32 128x128 slots
    16 256x256 slots
    6 512x512 slots
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB)
    (II) intel(0): 0x00120000-0x0012ffff: xaa scratch (64 kB)
    (II) intel(0): 0x007df000: end of stolen memory
    (II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000d6b8000 physical
    (II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000b04c000 physical
    (II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b08d000 physical
    (II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000000b040000 physical
    (II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000000d7fa000 physical
    (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
    (II) intel(0): 0x08000000: end of aperture
    (WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
    (II) intel(0): Mode for pipe B:
    (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
    (II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Mode for pipe A:
    (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    (II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
    (II) intel(0): Hardware state at EnterVT:
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000001
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x0001feff
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x00000008
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
    (II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
    (II) intel(0): DSPABASE: 0x01000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
    (II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
    (II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
    (II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
    (II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
    (II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
    (II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x01000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0xa204008e (disabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
    (II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (WW) intel(0): Hardware claims pipe A is on while software believes it is off
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Disabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 158
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Asus Laptop extra buttons
    (**) Asus Laptop extra buttons: always reports core events
    (**) Asus Laptop extra buttons: Device: "/dev/input/event5"
    (II) Asus Laptop extra buttons: Found 1 mouse buttons
    (II) Asus Laptop extra buttons: Found keys
    (II) Asus Laptop extra buttons: Configuring as keyboard
    (**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
    (**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event6"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) TPPS/2 IBM TrackPoint: Close
    (II) UnloadModule: "evdev"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) Asus Laptop extra buttons: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Comparing regs from server start up to After LeaveVT
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000000
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x00015455
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x80000668
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
    (II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x00000000 (1, 1)
    (II) intel(0): DSPABASE: 0x00000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
    (II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
    (II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
    (II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
    (II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
    (II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
    (II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x00000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0x2204008e (enabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
    (II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Latest configuration file which still is not working
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "record"
    # Load "dri2"
    # Load "dri"
    Load "dbe"
    EndSection
    Section "Monitor"
    Identifier "Internal LCD"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "External VGA"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    Option "Ignore" "True"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    Option "DRI" "False" # [<bool>]
    Option "AccelMethod" "XAA"
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    Option "monitor-VGA" "External VGA"
    Option "monitor-LVDS" "Internal LCD"
    Option "ModeDebug" "True"
    BoardName "82852/855GM Integrated Graphics Device"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Internal LCD"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card0"
    Monitor "External VGA"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Last edited by B0b (2009-05-10 21:07:56)

    firecat53 wrote:
    Try the xf86-intel-video-newest package from AUR.
    Scott
    Installed 2.7.0 from abs testing.. result is the same.. Unfortunately newest from AUR is not compiling complaining about some
    macro stuff
    Anything else?
    This is log file with 2.7.0 module:
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 23:54:58 2009
    (++) Using config file: "/root/xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Internal LCD"
    (**) | |-->Device "Card0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
    (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.7.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile IntelВ® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "XAA"
    (**) intel(0): Option "DRI" "False"
    (**) intel(0): Option "ModeDebug" "True"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
    (--) intel(0): Chipset: "852GM/855GM"
    (--) intel(0): Linear framebuffer at 0xF0000000
    (--) intel(0): IO registers at addr 0xFEB00000
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (**) intel(0): Using XAA for acceleration
    (II) intel(0): Hardware state on X startup:
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000000
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x00015455
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x80000668
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
    (II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x00000000 (1, 1)
    (II) intel(0): DSPABASE: 0x00000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
    (II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
    (II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
    (II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
    (II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
    (II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
    (II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x00000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0x2204008e (enabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
    (II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
    (II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section External VGA
    (**) intel(0): Option "Ignore" "True"
    (II) intel(0): Output LVDS using monitor section Internal LCD
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
    (II) intel(0): I2C bus "DVODDC_D" initialized.
    (II) Loading sub module "sil164"
    (II) LoadModule: "sil164"
    (II) Loading /usr/lib/xorg/modules/drivers//sil164.so
    (II) Module sil164: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7xxx"
    (II) LoadModule: "ch7xxx"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
    (II) Module ch7xxx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ivch"
    (II) LoadModule: "ivch"
    (II) Loading /usr/lib/xorg/modules/drivers//ivch.so
    (II) Module ivch: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_B" initialized.
    (II) Loading sub module "tfp410"
    (II) LoadModule: "tfp410"
    (II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
    (II) Module tfp410: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_B" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7017"
    (II) LoadModule: "ch7017"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
    (II) Module ch7017: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVODDC_D" removed.
    (II) intel(0): Resizable framebuffer: not available (0 2)
    (II) intel(0): EDID for output LVDS
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    (II) intel(0): Printing probed modes for output LVDS
    (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
    (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x600
    (II) intel(0): detected 128 kB GTT.
    (II) intel(0): detected 8060 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 50176 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 200700 kB available
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 131072 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
    (Cannot allocate memory)
    (WW) intel(0): Allocation error, framebuffer compression disabled
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
    (Cannot allocate memory)
    (II) intel(0): Allocating 3072 scanlines for pixmap cache
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
    32 128x128 slots
    16 256x256 slots
    6 512x512 slots
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (WW) intel(0): drmDropMaster failed: Unknown error 4294967295
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
    (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0002ffff: xaa scratch (64 kB)
    (II) intel(0): 0x007df000: end of stolen memory
    (II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000b26d000 physical
    (II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000e6c4000 physical
    (II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b157000 physical
    (II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000099bc000 physical
    (II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
    (II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x0000000006c1a000 physical
    (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
    (II) intel(0): 0x08000000: end of aperture
    (WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
    (II) intel(0): Mode for pipe B:
    (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
    (II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Mode for pipe A:
    (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    (II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
    (II) intel(0): Hardware state at EnterVT:
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000001
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x0001feff
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x00000008
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
    (II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
    (II) intel(0): DSPABASE: 0x01000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
    (II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
    (II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
    (II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
    (II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
    (II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
    (II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x01000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0xa204008e (disabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
    (II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
    (II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (WW) intel(0): Hardware claims pipe A is on while software believes it is off
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Disabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 158
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Asus Laptop extra buttons
    (**) Asus Laptop extra buttons: always reports core events
    (**) Asus Laptop extra buttons: Device: "/dev/input/event5"
    (II) Asus Laptop extra buttons: Found 1 mouse buttons
    (II) Asus Laptop extra buttons: Found keys
    (II) Asus Laptop extra buttons: Configuring as keyboard
    (**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
    (**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event6"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) TPPS/2 IBM TrackPoint: Close
    (II) UnloadModule: "evdev"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) Asus Laptop extra buttons: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Comparing regs from server start up to After LeaveVT
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) intel(0): DumpRegsBegin
    (II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
    (II) intel(0): C0DRB0: 0x00000000 (0x0000)
    (II) intel(0): C0DRB1: 0x00000000 (0x0000)
    (II) intel(0): C0DRB2: 0x00000000 (0x0000)
    (II) intel(0): C0DRB3: 0x00000000 (0x0000)
    (II) intel(0): C1DRB0: 0x00000000 (0x0000)
    (II) intel(0): C1DRB1: 0x00000000 (0x0000)
    (II) intel(0): C1DRB2: 0x00000000 (0x0000)
    (II) intel(0): C1DRB3: 0x00000000 (0x0000)
    (II) intel(0): C0DRA01: 0x00000000 (0x0000)
    (II) intel(0): C0DRA23: 0x00000000 (0x0000)
    (II) intel(0): C1DRA01: 0x00000000 (0x0000)
    (II) intel(0): C1DRA23: 0x00000000 (0x0000)
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
    (II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
    (II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
    (II) intel(0): CACHE_MODE_0: 0x00000000
    (II) intel(0): D_STATE: 0x0000030f
    (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
    (II) intel(0): RENCLK_GATE_D1: 0x00000000
    (II) intel(0): RENCLK_GATE_D2: 0x00000000
    (II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
    (II) intel(0): SDVOUDI: 0x00000000
    (II) intel(0): DSPARB: 0x00015455
    (II) intel(0): DSPFW1: 0x00000000
    (II) intel(0): DSPFW2: 0x00000000
    (II) intel(0): DSPFW3: 0x00000000
    (II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
    (II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
    (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
    (II) intel(0): DVOA_SRCDIM: 0x00000000
    (II) intel(0): DVOB_SRCDIM: 0x00000000
    (II) intel(0): DVOC_SRCDIM: 0x00000000
    (II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
    (II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
    (II) intel(0): PP_ON_DELAYS: 0x019007d0
    (II) intel(0): PP_OFF_DELAYS: 0x01f407d0
    (II) intel(0): PP_DIVISOR: 0x00270f04
    (II) intel(0): PFIT_CONTROL: 0x80000668
    (II) intel(0): PFIT_PGM_RATIOS: 0x00000000
    (II) intel(0): PORT_HOTPLUG_EN: 0x00000000
    (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
    (II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
    (II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
    (II) intel(0): DSPAPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPASIZE: 0x00000000 (1, 1)
    (II) intel(0): DSPABASE: 0x00000000
    (II) intel(0): DSPASURF: 0x00000000
    (II) intel(0): DSPATILEOFF: 0x00000000
    (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEASRC: 0x027f01df (640, 480)
    (II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
    (II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
    (II) intel(0): DPLL_A_MD: 0x00000000
    (II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
    (II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
    (II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
    (II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
    (II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
    (II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
    (II) intel(0): BCLRPAT_A: 0x00000000
    (II) intel(0): VSYNCSHIFT_A: 0x00000000
    (II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
    (II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
    (II) intel(0): DSPBPOS: 0x00000000 (0, 0)
    (II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
    (II) intel(0): DSPBBASE: 0x00000000
    (II) intel(0): DSPBSURF: 0x00000000
    (II) intel(0): DSPBTILEOFF: 0x00000000
    (II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
    (II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
    (II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
    (II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
    (II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
    (II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
    (II) intel(0): DPLL_B_MD: 0x00000000
    (II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
    (II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
    (II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
    (II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
    (II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
    (II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
    (II) intel(0): BCLRPAT_B: 0x00000000
    (II) intel(0): VSYNCSHIFT_B: 0x00000000
    (II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
    (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
    (II) intel(0): VCLK_POST_DIV: 0x0000888b
    (II) intel(0): VGACNTRL: 0x2204008e (enabled)
    (II) intel(0): TV_CTL: 0x00000000
    (II) intel(0): TV_DAC: 0x00000000
    (II) intel(0): TV_CSC_Y: 0x00000000
    (II) intel(0): TV_CSC_Y2: 0x00000000
    (II) intel(0): TV_CSC_U: 0x00000000
    (II) intel(0): TV_CSC_U2: 0x00000000
    (II) intel(0): TV_CSC_V: 0x00000000
    (II) intel(0): TV_CSC_V2: 0x00000000
    (II) intel(0): TV_CLR_KNOBS: 0x00000000
    (II) intel(0): TV_CLR_LEVEL: 0x00000000
    (II) intel(0): TV_H_CTL_1: 0x00000000
    (II) intel(0): TV_H_CTL_2: 0x00000000
    (II) intel(0): TV_H_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_1: 0x00000000
    (II) intel(0): TV_V_CTL_2: 0x00000000
    (II) intel(0): TV_V_CTL_3: 0x00000000
    (II) intel(0): TV_V_CTL_4: 0x00000000
    (II) intel(0): TV_V_CTL_5: 0x00000000
    (II) intel(0): TV_V_CTL_6: 0x00000000
    (II) intel(0): TV_V_CTL_7: 0x00000000
    (II) intel(0): TV_SC_CTL_1: 0x00000000
    (II) intel(0): TV_SC_CTL_2: 0x00000000
    (II) intel(0): TV_SC_CTL_3: 0x00000000
    (II) intel(0): TV_WIN_POS: 0x00000000
    (II) intel(0): TV_WIN_SIZE: 0x00000000
    (II) intel(0): TV_FILTER_CTL_1: 0x00000000
    (II) intel(0): TV_FILTER_CTL_2: 0x00000000
    (II) intel(0): TV_FILTER_CTL_3: 0x00000000
    (II) intel(0): TV_CC_CONTROL: 0x00000000
    (II) intel(0): TV_CC_DATA: 0x00000000
    (II) intel(0): TV_H_LUMA_0: 0x00000000
    (II) intel(0): TV_H_LUMA_59: 0x00000000
    (II) intel(0): TV_H_CHROMA_0: 0x00000000
    (II) intel(0): TV_H_CHROMA_59: 0x00000000
    (II) intel(0): FBC_CFB_BASE: 0x00000000
    (II) intel(0): FBC_LL_BASE: 0x00000000
    (II) intel(0): FBC_CONTROL: 0x00000000
    (II) intel(0): FBC_COMMAND: 0x00000000
    (II) intel(0): FBC_STATUS: 0x20000000
    (II) intel(0): FBC_CONTROL2: 0x00000000
    (II) intel(0): FBC_FENCE_OFF: 0x00000000
    (II) intel(0): FBC_MOD_NUM: 0x00000000
    (II) intel(0): MI_MODE: 0x00000000
    (II) intel(0): MI_ARB_STATE: 0x00000000
    (II) intel(0): MI_RDRET_STATE: 0x00000000
    (II) intel(0): ECOSKPD: 0x00000307
    (II) intel(0): DP_B: 0x00000000
    (II) intel(0): DPB_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_C: 0x00000000
    (II) intel(0): DPC_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
    (II) intel(0): DP_D: 0x00000000
    (II) intel(0): DPD_AUX_CH_CTL: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
    (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
    (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
    (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
    (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
    (II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
    (II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
    (II) intel(0): DumpRegsEnd
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86UnbindGARTMemory: unbind key 6
    (WW) intel(0): drmDropMaster failed: Unknown error 4294967295

  • Black Screen before installing windows 7. Lets solve once and for all.

    I have a late 2008 macbook pro and have been trying to install windows 7 through boot camp for a number of days now. I have read every forum on the internet and have tried every popular solution (i.e. resetting pram, smc, unplugging, changing screen resolution, etc.) and nothing has worked. I know there are many other people with this problem but none of them have solutions. I had windows 7 installed a few months ago but it stopped working and I had to delete it. Just yesterday I reinstalled Snow Leopard and still nothing. I created the partition and tried to install windows but it just goes to the blinking cursor for one second, then a black screen. I have tried everything possible and nothing works.
    Please lets try to get this problem solved because out of every single forum on the internet, none of them have solved this problem.

    I think after weeks of searching I have finally narrowed it down, based on what I have read, to a disk drive problem. It seems to be something wrong with the EFI or the entire disk drive in general. I am taking it to the apple store tomorrow and I highly doubt they will do anything.

Maybe you are looking for

  • How can I reset my iPad when someone else has signed into there icloud account and i dont know there password to sign out

    I let someone borrow my ipad and they have since gone back overseas. The problem I have is they are still signed into the icloud with there user name and password and i cant reset my iPad because of this. Is there away I can reset it

  • Advise and help pls

    hello illustrators. im trying to achieve the blue symbol going around propotionally around the eclipse with out it having it distort dramaticly,how can i do this?i also would like it so seem mapped on it with the bending as its going around.

  • Printer not working intermittenly since I hooked up my airport extreme?

    I hooked my printer up through my airport extreme.  I had everything working fine, but twice now it wont let me print.  I dont know what is going on? 

  • Will this code work (bapi)

    hi to all experts, my requirement is to delete the purchase requisitions line items if they are not converted to PO i have used bapi_requisition_delete to delete the pr here is my code will this work any inputs will be appreciated ...... this inside

  • Cisco UT Lite script for windows 2012

    Hi; Will Cisco UT Lite script (for Prime LMS 4.2.4) will support with windows Active directory and domain controller on Windows 2012? If yes can you please share Link, I try to search but unfortunitly I counldn't found. All document refere till Windo