IdeaCentre B520 - sound recording too low, sound on Skype too low

Hi
When I speak on Skype or use Sound Recorder to record my voice (using internal microphone), the sound is very low.
I think I have turned up every possible Microphone and Audio setting on the system to its highest.
My IdeaCentre B520 is very new and I haven't installed anything else on it other than Skype.
OS is Windows 7 x64.
I used the Lenovo automatic check for drivers and it said all drivers up to date.
I haven't had a system with an internal microphone before, I literally just talk (loudly) at the monitor, I presume there isn't anything else I need to do?!
Thanks for any help you can give with this frustrating problem!
Patricia

Hello Patricia,
This is not good to know that you are encountering the issue with your new desktop.
Please make sure that the Audio driver version is 6.0.1.6294, if it is not then you may download it from the mentioned below web link.
http://consumersupport.lenovo.com/ie/en/DriversDow​nloads/drivers_show_4706.html
If the version of the driver is same then you can try the settings.
1. Right-click the icon of the speakers icon at the notification area, and then click “Sounds
2. Click the tab “Recording”, and then click “Microphone” à select “Properties”.
3. Select the tab “Listen”, and then check “Listen to this device”. Apply it, and the function will be enabled.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Satellite M300: Low sound microphone levels and crackle sound using Skype

    Brand new machine, and tried to use Skype.
    Low sound levels and a crackle through it.
    Tried it in sound recorder, and low sound, but no crackle.
    Can not get the sound levels up.
    Driver for Conexant HD SmartAudio 221 shows as up to date (4.36.7.0)
    Any assistance would be appreciated.

    Do you use Toshiba factory settings? YES
    Which OS do you use? VISTA
    Do you have the same problem using headset? NO
    I have narrowed it down a little more. It is only when I am connected to my wireless network. I can have Wi-Fi enabled, and connected to the internet via a mobile internet connection and there are no issues.
    When I am connected via the router, I have this issue. You could say it is the router, however I have various other machines connected to the same router, without issue.
    So, to clarify.
    WiFi on - not connected to internet via router, however connect by other means - All ok
    WiFi on - connected to the internet via router, issue.
    Router is Thomson SpeedTouch 570

  • Lenovo IdeaCentre B520 - Plug in a Vhs and record my old vhs tapes!

    Hi!
    Besides of all i want to thank you for the time you gonna lose to read this post.
    I bought a lenovo ideacentre B520 and i want to record my old vhs tapes.
    I plug in the VHS into the AV in ports (yellow, red and white) and then i switch in the monitor to the av mode.
    I can see the vhs tape in my computer but the problem is that i cant control the pc mode. I'd like to know how can i record the vhs tape in Av mode.
    Thanks for the help, and sorry my english writing...
    Cesar

    You'd need to tell us what kind of film and cameras you have. I think you'll need to buy some equipment to do that.
    An alternative is to send your film to a place like Integrated Imaging and they could transfer it to DVD or another suitable format for iMovie.

  • IdeaCentre B520 display backlight issue

    I have a Lenovo Ideacentre B520 All in one. It powers on alright. But the LCD backlight does not come on. I can see a faint picture on the screen if i use a flashlight. The unit's Backlight converter board i noticed the capacitor on it is damaged. I can order a new board and replace it (easy enough). I was wondering if this is a common thing on these all in one units? Another person told me it could be the mainboard of the unit.  I'd rather spend about$50.00 than 189.00. Also when i hook the unit to HDMI out and use a external monitor i see the lenovo splash screen, but when i install a hard drive after the BIOS screen it locks up and i have to restart, but if i do not install a hard drive, then i can boot ubuntu or memetst (just for testing purposes). Any ideas?

    Yes, at maximum brightness level the backlight bleeding is very visible but I use it at 5 or 6 level where it has excellent contrast ratio considering how crappy current notebook displays are in general. The uneven backlight is caused by fancy LED backlight which is still not able to deliver similar quality regarding uniformity as good old CCFL backlight (that's why professional LCD monitors still rely on W-CCFL backlight). But I agree that the top-left corner is way too much bad and might indicate that the panel is seated badly in the frame. On the other hand my old IPS panel in R51 also have backlight bleed at maximum brightness level.
    Major problem is that Lenovo is still not able to fix the stupid bug with brightness level always set to max in BIOS screen that the backlight bleeding is very visible and irritating everytime you boot your machine.
    IMHO, the X220 IPS panel is still much better than any ugly contrastless TN panel Lenovo puts into ThinkPads (except 15" FHD). I bet that you would hate the X220i TN panel more than this one
    There are also two different revisions of the IPS panel, the second one fixes problems with image retention. As for comparison with Z60m, X220 display lid is much more fragile so the panel is not protected well against pressures and flexes. In any case panel flex should affect the backlight bleeding temporarily only. If it persists it is subject to repair (replace, reseat etc.).
    Unfortunately I don't have any good low-light camera that takes useable pictures in dark environment so I can't post relevant images of the backlight bleeding.

  • No sound on Skype video call using Xbox One

    No sound on Skype video or audio call using Xbox One. The Wireless headset works but cannot route audio to Kinect only. I tried assigning the headset to another user but still nothing. Thoughts?

    Hi Derek,
    I'm having the same issue on the Xbox One too - no audio when connecting to contacts and contacts cannot hear me either (they can see me) when using the Xbox One app.  This is not an issue on other Skype platforms.
    In addition, when dialing the Skype test number on the Xbox One, I get the dialling tone when calling, but once the the call connects there is also no audio from the recorded message (usually a British lady).
    The Skype app worked before the recent Xbox One firmware update and the same issue occurs on different TVs.  It also does not work when headsets are being used.
    I have deleted and redownloaded the app.  In addition I've unlinked and linked my Microsoft account to my Skype and still no success.
    Any suggestions? Thanks.

  • 0404 & onboard sound for Skype?

    I have an 0404 board & patchmix that I use successfully with Ableton, but use Skype frequently and would like to use the onboard audio for simply plugging in a headset.
    Sounds simple, and I have achieved it for a short while, but I cannot seem to achieve it regularly and there are clearly some things going on behind the scenes that I do not understand.
    I have done the obvious stuff like set sounds/audio/sound recording to the onboard c-media wave device.
    Is there a patch mix setting I need to use? Or is it all just incompatible?
    System: XP SP2, Asrock 4i65G motherboard, c-media wave
    David

    Hello samfrancis28, welcome to the HP Forums.
    It appears that you're having an issue with sounds and skype. I will try to assist you with this.
    A few questions to start for you:
    What are the model and product numbers for your notebook?
    What is the currently install operating system?
    To address the issue, I would suggest these documents:
    No Sound from Speakers (Windows 8)
    Troubleshooting Skype Performance Problems
    Using Skype to Make Voice and Video Internet Calls (Windows 8)
    Start with that and let me know how this goes for you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • How do I adjust incoming sound for Skype and magic jack

    How do I adjust incoming sound for Skype and magic jack. Out going sound is great.

    Hi, domiboy.  
    Thank you for visiting Apple Support Communities.  
    Here is some information that you may find helpful.  
    Adjust audio
    Cheers, 
    Jason H.  

  • When recording my midi keyboard when I press the pedal down it records a low E, how to I get rid of this?

    When recording my midi keyboard when I press the pedal down it records a low E, how to I get rid of this?

    It was gift back in September. You can follow the instructions in the link below to remove them:
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support

  • Data record too long to be imported (0 or 5000)

    Dear Expert
    in LSMW While display the read record this is the error comes
    "Data record too long to be imported (0 or >5000)"
    how to rectify this?
    but system allows for further steps and upload the maser record
    Regards
    Karan

    Hi,
       Hope the same question is already answered in the thread: Error in uploading master through LSMW
       Please check and revert back if its not solved.
    Regards,
    AKPT

  • Pulseaudio 3.99.2-1 - no more sound in Skype 4.2.0.11-1 from multlib

    Hey,
    on x86_64, upgrading to pulseaudio (+libpulse + lib32-libpulse) 3.99.2-1 makes my skype sound break. Skype is installed from multilib. It doesn't output anything anymore, even though everything works fine with pulseaudio from extra. A few days ago I also experienced badly crackling and distorted sound whenever skype played any sound (that was still with pulseaudio 3.99.2-1).
    I'm using the snd-hda-intel alsa driver.
    A workaround is to put tsched=0 in /etc/pulse/default.pa after
    load-module module-udev-detect
    but I didn't have to do this with pulseaudio from extra. Downgrading to pulseaudio from extra helped. Anyone experiencing similar problems?
    Best
    Bastian

    totsilence wrote:Hey,
    on x86_64, upgrading to pulseaudio (+libpulse + lib32-libpulse) 3.99.2-1 makes my skype sound break. Skype is installed from multilib. It doesn't output anything anymore, even though everything works fine with pulseaudio from extra. A few days ago I also experienced badly crackling and distorted sound whenever skype played any sound (that was still with pulseaudio 3.99.2-1).
    I’m also having problems with pulseaudio 3.99.2-1… although my skype works fine after 'tsched=0' trick. After upgrade I noticed no sound coming from VidyoDesktop, neither from Linphone (alsa works fine, problem is only with pulseaudio output), they will however work fine with pulseaudio from extra. I’m using both laptop and desktop intel-based x86_64 arch system. Both using snd_hda_intel module. Both present the exact same problem.
    The applications mentioned recognize pulseaudio output and input in configuration and they appear correctly within pavucontrol when they are supposedly outputting sounds. But although the dB bar does move sometimes, sound is never actually heard.
    nperry wrote:There was something I seen on Skype's jira [1]. However for the last couple of days Skype's jira has just been forwarding to their homepage so not sure.
    From a cached url on google I could find the following:
    Attention: jira.skype.com will be decommissioned on May 15, 2013.
    If you have a feature request or have found a bug in our clients please contact customer service or visit our support network.
    Developers looking for assistance with their SkypeKit or Desktop API project should visit the Skype Developer Forum.
    If you have an open issue we will continue to work through these, however, you will not receive any more updates on their status.
    Thank you for your support.

  • Need help finding the Motherboard parts number on Ideacentre B520

    Hi guys,
    I'm currently repairing an ideacentre B520 for a customer and need to have the MB parts # to have the parts ordered. 
    i've found a white sticker with somes number on it but I don't know which one is the MB parts number.
    Here the number:
    27*939530*126
    1a*2
    4*mfg: 1*2 (in bold)
    PL*00:u0* (in bold)
    46*9ae9*l01
    and the last one on another sticker.
    MB            11s1*013462z*0mP17*043  A*<
    (I've put somes * instead of caracters on purspose.
    Thanks

    Hi,
    The Motherboard part number starts with 11......
    If you download the Hardware Maintenance Manual from the Lenovo Support site, all the part numbers are there, as well as removal instructions.
    Good luck!
    CB2011

  • No sound on skype in windows 10

    Everything is fine but only no sound in skype, i can here staff from youtube, media player etc. But only can't here anything on skype. Please help!!!

    I would like to thank Maria B from Technical support for fixing this issue for me... All I had to do was uninstall skype then remove all skype references from my registry.. So you can either use something like Revo Uninstaller  OR manually delete using the following: hit the windows key + R to bring up the RUN search bar.Type: regeditthen go to edit; find; and type skype into the search parameter. then just keep using find next and delete all the reg files it finds. (this method takes a while)[there may be one or two files that you cannot delete, just ignore those] Then try and reinstall please be careful though, the final step for me was to follow a onedrive link that was sent by skype tech support to reinstall. I'm assuming you dont need that final step. failing that just do what I did and speak to tech support BEFORE making the changes

  • People can hear my computer sound through skype.

    My computer sends all my sounds through skype so that every one i´m talking with hear what i´m hearing! I´ve tried all the stuff i coold find on other threads but without succes. I´m using a siberia steel series headset v2. My sound card is sound blaster recon 3di. Please help!!!

    I have the same problem and i'm going to become crazy soon. I'm trying not to swear like **** in here right now. I just bought new headphones (my friend also has them) just because of my friends could hear my skype sounds. No1 knows how to fix it!!!!! I have been searching for years! No one knows how to fix it!!!!!
    -My skype friends can hear their own voice.
    -My computer sound like music and gaming sounds...
    -They can hear every ******* little sound of a rat 10km from our house.. They can hear stuff I can not hear! This sucks!
    Why does this happen!?!??????????????????
    I hate to skype! I hate skype just because of this! I want to fix it!
    My headphones are really good! My friend I skype with also has them!
    When I mute my mic, they can still hear me and my voices!
    SKYPE PEOPLE! HELP ME! DONT JUST READ THIS HELP!
    MY FRIENDS THINK MY COMPUTER SUCKS AND ALL MY STUFF SUCKS BECAUSE MY SKYPE IS BROKEN
    Thanks please help. 3:

  • Can't hear any sound in skype calls w/headset

    Title says it all. My headset I bought just a few weeks ago cannot play any sound in skype calls, including the test call. I tried all the methods of fixing it on the website and did the diagnosis on windows, nothing.
    It can play the ringing in the test and any other sound on my computer, just not audio from skype. Ideas?

    I suggest the following:
    1. Verify you have the latest version of Skype - some fixes to these type of issues were done in the last versions.
    2. Also, please verify you have the latest drivers for your headset.
    3. If the above does not help, add a mediator virtual audio device. This technology is installing a "middle man" between skype and the physical audio device. You can try SoliCall Pro which is mainly an echo cancellation software using the virtual audio device technology.

  • Ideacentre B520 Bios Recovery

    Hi,
    I would like to know, if there is a BIOS Recovery function for the IdeaCentre B520. Something like the normal Recovery-function for AMI-Bios with AMIBOOT.ROM on an USB-Stick or a Jumper on the mainboard.
    I need this just for my documentation. If there will be a BIOS-Update in future, I could be sure, that I can recover my BIOS in case of a bad flash.
    If there is no such option, were is the BIOS-chip located on the mainboard?
    With best regards,
    nordicboy

     That would be very interesting, if there is such a recovery option! Is there a step by step instruction? Does it even exist?

Maybe you are looking for

  • Windows 8.1 - safe to delete "Browser Choice"?

    Windows 8.1 The European Union ordered Microsoft to include a program in the Windows OS sold in Europe. This program makes a pop up  to invite PC users to use browsers different than Internet explorer. This is not a malware or adware issue. This obli

  • LR4 from PC to Mac via ext drive - can't move folders

    I'm in the process of migrating from Windows (7) to an iMac which has been a partial success re Lightroom but I'm having problems with moving folders / files within LR (4.4) and could do with some advice please. On the Windows PC I had all of my phot

  • Need help setting up measurementLog scripting

    I'm gruadually getting better at creating script but for some reason I can't get my brain around this one.  I'm trying to set up a script to take measurements of a series of 64 marquees created from an equal number of paths then export that log after

  • Is there graph facility in ADF 10G?

    Hi All, Due to some reasons I am using ADF 10.1.3.3.0.... So can any one tell me How to use Line Graph in ADF. Thanks Sekhar

  • Nikon Raw Images

    Good morning...I never had a problem with iPhoto reading Nikon RAW images until now. I just upgraded to the D300s from the D70 and iPhoto cannot import these files. They are still NEF. Not sure what's wrong. Thanks.