Ideacentre D400 Purple LEDs after system restore

Hi. I recently bought ideacentre d400 without hard disk. I have formatted my disk and tried to install windows home server from recovery DVD. Everything seems doing fine, but when installation reboots server it stays in initial mode. Disk LEDs are purple same as system status LED. When I'm trying to install Connector it says that it can't download some files from server. When I connect via browser windows server page loads correclty. What can be causing this trouble?

Hello @DAVHPForum,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to boot your computer using the HP system restore CDs, and I would be happy to assist you in this matter!
If you are not able to recover your system by following the steps in this document, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Quicktime issues after system restore

After system restore we had to reinstall games which required quicktime. after which I reinstalled itunes, but it wouldn't install without completely uninstalling everything for quicktime. reinstalled updated quicktime and itunes, but now games aren't working. Uninstalled games and reinstalled it, but still getting macromedia projector error message. Suggestion is to reinstall quicktime. I feel like I am going in circles. Appreciate any suggestions

still getting macromedia projector error message.
What's the precise text of that error message, squirrel?

After system restore i reinstalled firefox, how to get back bookmarks etc with old firefox data?

After system restore the only thing i have is old firefox data on desktop if all bookmarks, passwords are recovered it will be great help.
P.S
i reinstall firefox from drive other than c ,that was in downloaded form.
Thanks

The "Old Firefox Data" folder on the desktop has been created as the consequence of resetting Firefox.
Doing a Session Restore may have reverted the profiles.ini file to a previous version that hasn't registered the new profile folder that a reset had created, so you may need to check for this.
* C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\
The "Application Data" folder in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
If you have a profile folder that is more recent than the "Old Firefox Data" on the desktop then you can use edit the profiles.ini file and change the path of the currently default profile to the name of the profile folder as you find in Document and Settings.
*http://kb.mozillazine.org/Recovering_a_missing_profile
*http://kb.mozillazine.org/Profile_folder_-_Firefox
It is always best to be cautious with using System Restore as this can cause some file to be replaced with older copies, i.e. your Firefox installation and profile folder can get inconsistent and you may have to reinstall Firefox as well.

After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Unable to Load Windows After System Restore from BIOS freeze

I have a pavilion G6 that froze after a BIOS Update ran. Here's what happened and here is what I did:
Uninstalled HP printer software; upon reboot, BIOS Update appeared and ran.
Upon reboot, Win 7 froze @ Welcome screen.
I was instructed this am on this forum to press F8 and do a system restore, which I did.
This appeared to work until about 30 mins ago when it began freezing again and opening to Safe Mode screen.
Now what??

Hi
Workaround:
There are few steps that has worked for few but not always..
Restart and tap F2. F2 will show an option “BIOS Management” . Select BIOS Management and then select “Roll Over to the previous BIOS”
BIOS Management option will not be available if the system do not have HP_Tools partition installed or if it is deleted.
Fix if BIOS Management is not available
i)                    Press and Hold the Windows Key and B key at the same time when the system is turned off or follow the steps from this link: Recovering the BIOS using key press combination
iii)                 Shutdown the Notebook. Remove the Hard Drive and then turn the computer ON and tap F10 to load BIOS. If it loads BIOS then it should rollback to previous BIOS or it might show a black screen. Just leave the system ON for about 2-3 mins and turn it on with the hard drive and check.
   If none of the above worked then most likely we need to bench the notebook as system will not boot from recovery discs.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I have dloaded and reloaded firefox 7 b4 i had firefox 5 now after system restore and proxy setting changes an d default settings fire fox still will not open what am i doin wrong

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

After Effects CS5.5 Error Rendering known clean project even after Reinstall and after System Restore

I've been getting frequent, but not consistent, errors during rendering AE CS5.5 projects with lots of 3D layers and lights. I have gone back to a known clean project to confirm the issue isn't with a particular project. The error is usually an error invoking the advanced 3D render engine. This is sometimes followed by a bad tracked memory id popup. But sometimes the program just hangs up.
My System:
i7 [email protected]
24GB RAM
Windows 7 professional 64 bit SP1
NVidia Geforce GTX 570
I have trashed the preferences, cleaned the cache, turned off rendering multiple frames, deleted Open GL, updated the graphics card drivers and even tried reverting to old graphics card drivers. Window's Memory Diagnostic Tool didn't find any problems. System File Checker Tool didn't find any corrupt files. My system drive is not fragmented. I have reinstalled AE, reinstalled all of CS5.5, and did a system restore to a known working point (both with and without doing the Windows updates that have occurred since the restore point). None of this fixed the problem.
I have tried the script BG Renderer to render in the background. I have consistently gotten the following error running the script, which I'm hoping will be a clue:
"aerender ERROR An existing connection was forcible closed by the remote host.
:Unable to receive at line 314
aerender ERROR: After Effects can not render for aerender. Another instance of aerender, or another script, may be running; or, AE may be waiting for a response from a modal dialog, or for a render to complete. Try running aerender without the - reuse flag to invoke a separate instance of After Effects."
The first two times I tried to render with BG Renderer, the error came right after closing AE. But I still got the same error if I left AE open and just sat and watched.
Any help is appreciated.

Update: I believe I have discovered the problem! It was a bad RAM stick. Windows Memory Diagnostic tool found nothing wrong, and nothing in my system seemed to be effected other than the ability to render complex AE projects with 3D layers. After a complete system restore to a known working point failed to help, I opened up the machine. Finding nothing loose, I methodically tested all the memory sticks to find the culprit. Everything is running smoothly now, albeit on less RAM.

CS3 won't start after system restore, fails to reinstall

I am running CS3 design premium on Windows 8. I've have the computer (Lenovo with Intel i5) for two months, though I used the design suite on my previous computer. I had to run System Restore to fix a problem with Firefox, and after I did none of my Adobe products worked. I have uninstalled/reinstalled several times while following the Adobe Help page "error message at installation" guide. Each time I get the message that Acrobat installed correctly, and everything else "Component install failed." I also wiped everything Adobe off the program list (there were a few CC programs I had trialed, plus Flash Player and some plugins) ran the CC cleaner and still got the same error message. I even tried downloading the program files from Adobe in case there was a problem with my disk and that wasn't it either. I tried enabling FLEXnet and installing under a new user, each to no avail. Examining the log file found no instances of "Return value 3" and "FATAL." The search for "ERROR" found several items that I had either already tried or made no sense.
I ran the system restore again to an earlier point, and now I can't even uninstall anything. The CC cleaner tells me some files could not be cleaned, and I should close my browser and try again, but there are no browsers open. Restarted computer and tried again, same thing. It seems I've tried all the options.
Super frustrated.

Installation and Licensing Problems | Mylenium's Error Code Database
Read the part about the CS3 installer bug.
Mylenium

Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
Was IE11 ever offered (or installed) via Windows Update?
Is her computer currently fully-patched at Windows Update?
Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troubleshoot Shockwave Player installation for Windows
http://kb2.adobe.com/cps/403/kb403264.html
You will find support for Shockwave Player in this forum:
http://forums.adobe.com/community/webplayers/webplayers_shockwave
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Start and Start apps don't work after System Restore

Hey guys, I tried to install Andy (Android emulator) on my PC today and I had to reboot after the setup was complete. This time when booting up, my computer froze before login screen. I've restarted the computer several times, but no login screen.
So I used System Restore to restore my system (refresh point is 2 days old) and voila, everything works like it should...
Except for Start menu, Cortana & search bar and notifications. Restarting explorer.exe didn't fix the problem. Even Start menu apps like Music or Store don't work... Only way to open the Settings app is to click on my network connection icon. Help please!
I'm using build 9926

..............So I used System Restore to restore my system (refresh point is 2 days old)...............
It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
If you cannot use Start Menu, please follow this instruction given by Insider Hub......
Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
Select the Internet Explorer icon.
Type http://update.microsoft.com into the address bar and select
Enter.
If you are prompted to run a control, click
Yes or Confirm
This should bring up the Check for updates window. Install updates.
If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
Hold down the Windows key and select L to lock the device. Swipe up or select
Enter to open the sign in screen. Select the
Power icon on the log in screen to restart the computer.
OR
Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
shutdown –r to restart
Good luck.

Audit Issue in QA after system restore and client copy

Hi Experts,
We have an audit issue and need your advise on that.
Our QA system was audited and auditors were looking for the approval tickets on which a user was created. I found that several users that were not created in QA and do not even exist in QA have their change logs in QA showing that user was created.
I researched it and found the steps that Basis and DBA's do when creating a new QA client.
1. Basis export user master and authorizations using SAP_USER profile from the target QA environment.
2. Then DBA's restore the QA Environment from the Production Backup.
3. Basis import back the preserved User master and roles using SAP_USER profile.
But when reading about this profile, I came to understand that change documents ( USH* ) tables are not exported and imported back. So that is why we have change logs in our QA from Production system.
So my question is how to solve this issue, where Auditors look at the change documents in QA and ask for the documentation though in reality these change documents are coming from Production. Should we ask for DBA team to truncate USH tables or is there a client copy profile that saves the change logs that we can export and import back.

Hi,
as you know the USH* tables belong to delivery class L. The tables in this class are never copied during client copy but you don't do client copy. Idea of deleting records from L tables after backup restore does not sound good because you will loose all data. As a workaround you could backup content of tables with delivery class L, export users SAP_USER, restore production backup, import users and import backup for tables with delivery class L. There is around 5000 L tables in ECC. Another approach could be to restore production on different box and do proper client copy to QA system.
Cheers

ITunes dead after System Restore

I can no longer launch iTunes, and this has nothing to do with spyware.
Sequence of Events:
1) Last Thursday, I purchased a new track from itms (Iggy Pop - Candy - it's good, check it out).
2) Upon trying to play the track, I was presented with the message that the computer was not authorized to play the track. Other songs I tried to play gave the same error. I had been perfectly content using iTunes 4.7. However, in order to play the tracks, I now needed to upgrade to the current version of iTunes. This was, imo, obnoxious, but I capitulated, and downloaded and installed v6.0.1.3. After installation, iTunes worked perfectly fine.
3) Thursday evening I shut the computer down for the evening. I didn't use the system again until Sunday evening. When I powered the machine up, Windows booted to a black screen. Safe mode worked properly, but 'normal'-mode would not light the display (this is a laptop). Not knowing what was wrong yet, I tried using System Restore to return the system to a slightly earlier state. The most recent checkpoint was just before installing the iTunes update, so that's where I restored to.
4) System Restore didn't fix the problem. That's when I discovered the switch on the laptop that senses whether or not the lid is closed was broken, and it was telling Windows the lid was closed, resulting in the darkened screen. (I've removed the switch while I wait for the replacement plastic piece I need, so that's no longer an issue.)
5) System Restore did not have the option to undo the previous System Restore.
6) I then re-installed iTunes 6.0.1.3. Each time I try to launch iTunes, I see the standard MS "Do you want to send the error info to Microsoft?" message box, and iTunes won't start.
To try and repair the problem, I've tried uninstalling iTunes and Quicktime repeatedly. I've tried System Restore, and then a reinstall, several times. I've been a Computer Tech since '94, and routinely remove spyware problems from people's computers in a professional capacity. I am certain my iTunes problem is not malware-related. However, just to cover all bases I went ahead and followed the Apple doc referenced repeatedly in these forums involving MSCONFIG to ensure my iTunes problem wasn't related to some startup issue. I've taken the iTunes folder, with the library.itl and .xml files, and moved it to the desktop prior to reinstalling iTunes. I've uninstalled, and then deleted the Program Files\iTunes and Program Files\iPod directories prior to reinstallation. I've disabled my antivirus during the install.
No matter what I've tried, iTunes will no longer start.
Anybody have any ideas what I can try next to revive iTunes on my PC. I very much don't want to lose my existing playlists, album art, and music files (especially the approx. $130 of purchased music), obviously.
Thanks,
Steve
System:
Inspiron 8500
Windows XP Pro, SP2
Grisoft AVG Free Edition antivirus.

well done, NoahsMyBro!
hmmmm. some thoughts (speculation warning) on what might have gone wrong with the QT. a system restore "over top" of a fresh itunes install will strip out some installation registry entries from both QT and itunes. (under those circumstances, itunes won't launch, spitting out a "some of the required files ..." error message.)
under those circumstances, i usually recommend uninstall QT and itunes prior to the reinstall. (of course, you had other more pressing things to worry about at the time ...) i've been doing that because the QT component of the itunes installer bundle can be a little more delicate than the itunes component when it comes to installing "over top" of existing program files and folders. i think it's partly to do with the fact that it's the second install in the chained install (more can go wrong with it). so the QT may have been compromised on the reinstall, even though the itunes part of the install went through fine.
you don't tend to get the same QT install problems on a standalone QT install (again, speculation, but it seems plausible) because it's not the second install in a chain.
love, b

Help with Photoshop Elements 10 after system restore

Hi I need some help and guidance. I have successfully installed my Photoshop Elements 10 twice now; once on my own; and following a MS Vista System Restore; with the help of Adobe support . I then worked on it for a day and all was well.
But unbeknown to me at the time, I had a MS System corruption that was causing Boot issues resulting in a forced Restore of my system and both Restores caused the Photoshop elements desk-top shortcut to disappear and a subsequent PSE10 re-install to fail with the dreaded Data7 , and "Application Shared Technologies" and rollback of Orgainizer and Editor etc etc.
I now realise that the two events were connected and the Adobe Support Person helped me get PSE10 up and running but it involved a lot of file permission changes etc, which lost me in the process, which was done remotely. PS Great customer support!!
After sorting out my MS Vista problem due to "Corrupt System" files, I now need to get my PSE10 up and running again; but how?
Regards John

Have you tried uninstalling and installing again?
thanks.

Itunes wont work after system restore

Itunes will no longer startup or uninstall/reinstall after i recently did a system restore on my laptop i can get it running by opening a song, and it works fine then, but its an old version cos i cant update! looked everywhere for a solution and cant find one anywhere!
Thanks

(c) the feature you are trying to use is on a network resource that is unavailable.
Click ok to try again or enter an alternate path to a folder containing the installation package 'itunes.msi' in the box below
Use source
C:\DOCUME1\Alex\locals1\Temp\IXP267.TMP\
Okay, given that the QuickTime seems to be working fine, that iTunes message is probably the key to this.
Download and install the Windows Installer CleanUp utility. Run the utility, find the iTunes entry in the list of programs that show up in CleanUp, and remove the iTunes entry.
Description of the Windows Installer CleanUp Utility
Reboot the PC and try another iTunes install. Does it go through properly this time? If so, does iTunes launch properly again?

Ideacentre D400 Purple LEDs after system restore

Similar Messages

Maybe you are looking for