Ideal FCP drive configuration on Mac Pro?

I'm configuring a Mac Pro that I'm going to order in the next day or so. I do 90% of my work in Final Cut. I'm not sure of the best way to configure the drives. I'm not worried so much about the sizes or RAIDs, but the way Final Cut uses files and how I can I lay out everything it needs so it's not working too hard to get at it. The last time I built a system I just had to subscribe to the 'render files on internal drive, footage on external' rule that I've heard for years. But now there's more options and I want everything to run as smooth as possible.
I read here on the forums that a drive that does nothing but hold render files speeds things up. It got me thinking: Should I have a drive just for render files? Should I have a drive just for music? Is there anything I should definitely keep OFF the boot drive?
Initially I was thinking of putting four internal drives in the Mac Pro. Two would be a RAID 0 as the boot drive with the apps and render files. The other two would be a mirrored RAID with all my music, graphics and permanent, frequently used footage. Then I'd use an external drive for project footage.
I don't need an internal TB for all this stuff, but Apple's minimum additional drives are 500G in size.
For all I'm spending I want this thing to hum with productivity. I just need to find out the best arrangement.
Advice?
Thanks!

Do not raid the system drive. No no no...the system drive needs to be on it's own. If you have 4 drives in the machine, and you want to raid them, leave one alone and raid the other 3. There is no point in raiding the system drive.
And never store any media on the system drive, all media should be stored on separate media drives. Because the system drive is very busy doing system stuff, and if FCP needs to access those file when it is busy...dropped frames. So yeah, definately keep ALL MEDIA referenced by FCP off the system drive.
Shane

Similar Messages

  • Can I move hard drives from one Mac Pro to another?

    I have two mid-2010 Mac Pros that I work with daily - one 8-core on 10.7.3 and one 12-core on 12.7.4.  I would like to take all of the drives out of one Mac Pro and put them in the other and vice versa, essentially trading their content.  It probably sounds pointless, but I would like to build the more powerful one out from scratch, and right now the less powerful one is nearly empty.
    Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other?  I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.

    rfairley wrote:
     ...Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other?  I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.
    I've moved drives from a Mac Pro 1,1 to a 5,1 and they were able to boot the newer Mac, but to ensure that the OS was configured for the newer machine, I ran the appropriate combo updater once the drive was installed. If you're planning to stick with the drive rotation, doing that shouldn't hurt and might help even though the machines are of the same vintage. Note, however, that some commercial software keys in on machine specifics and/or the serial number to prevent piracy, so swapping drives can cause other problems.

  • I need to buy some new hard drives for my Mac Pro

    I had an extra internal hard drive in my Mac Pro, a Seagate one, that suddenly stopped working and I needed to send it to a data recovery company, so...
    Now I'd like to
    - Install a new internal HD
    - Install a NAS with two/three disks. (Hitachi if possible, as I have read are the ones that last longer, more reliable than WD and by far more than Seagate).
    But to do that I'd like to know how to find out the right type of disks for my computer.
    I'd be very gratefull if anyone would tell me where to look it up.
    Thank you in advance
    In case any of you can help with this, these are the details of my Mac Pro
    thanks again
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Mac OS X Lion 10.7.5 (11G63b)
    2 x 2.66 GHz Dual-Core Intel Xeon
    Memory 7GB 667 MHz DDR2 FB-DIMM
    Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          7 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          Not Available
      Hardware UUID:          00000000-0000-1000-8000-0017F20F9F40
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    The only HD now
    Intel ESB2 AHCI:
      Vendor:          Intel
      Product:          ESB2 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.10 Supported
    ST3250824AS  P:
      Capacity:          250,06 GB (250.059.350.016 bytes)
      Model:          ST3250824AS  P                         
      Revision:          3.BQK  
      Serial Number:                      9ND1P4X7
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Bay 1
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk0s1:
      Capacity:          209,7 MB (209.715.200 bytes)
      BSD Name:          disk0s1
      Content:          EFI
    HD INTERNO PRINCIPAL:
      Capacity:          249,2 GB (249.199.591.424 bytes)
      Available:          37,91 GB (37.914.918.912 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
      Content:          Apple_HFS
    Recovery HD:
      Capacity:          650 MB (650.002.432 bytes)
      BSD Name:          disk0s3
      Content:          Apple_Boot

    NAS is of course external and depends on how you access it. And then t he ideal for RAID5 for instance woudl be WD RED series, but those do not work inside Mac tower.
    Look up "TLER"  regarding WD drives and RAID.
    Apple does not endorse or anything, not in decades and when there were problems - G5 and early adoption of SATA and changing standards and features, it was users that did the troubleshooting. 
    So unles you are using Apple's PRO RAID card, which I don't think anyone would or should and which is limited to 2TB drives and only instance of a ceiling on supported drives (it is req'd for SAS though), use your own research.

  • SSD & HDD 2 drive format query Mac Pro 3.1

    Hi
    Can't seem to get a straight answer to this question anywhere else so am turning to anyone here that can help.
    I currently have my original 320 gig drive in my Mac Pro 3.1.
    I want to add an SSD and format it so that its the boot drive and contains the programs and nothing else.  The 320 gig drive will house all the 'other stuff' (photos, vids etc)
    I don't want to migrate anything over - I basically want to start with two empty drives - SSD for boot and programs and 320 Gig drive for stuff.
    I just want to know the best practice for this.  Do I have to wipe 320 gig first as its currently the boot, then add SSD in to the computer.  Do one at a time?  Both together?  I've been used to having one hard drive all these years and am having problems working out best way to do.
    I've asked elsewhere and people keep telling me to migrate stuff over from the 320 Gig drive. I don't want to do this - I want to start with two fresh drives and put everything back on manually (tedious, I know, but thats the way I want to do it)
    Any help in this matter greatly appreciated
    Craig

    you want simple? just buy a 500GB $225 Samsung EVO
    http://www.amazon.com/Samsung-2-5-Inch-Internal-MZ-75E500B-AM/dp/B00OBRE5UE/
    There use to be, and still can be, reasons to split the OS and apps from the data drives.
    You want speed, then even SATA III with 500MB/sec read/writes, or XP941 with 900MB/sec writes, and 1000MB/sec reads cannot be beat. And you could not fit data onto or justify the cost when an SSD was too small and when 500GB cost $1500.
    SSD Blade Drive for "Classic" Mac Pro
    Most PCIe cards costs $79-299 and add a level of complexity that the XP941 adapter does not though.
    But you do this all the time, but just never had a dedicated system boot drive before. When 15K SCSI drives were small and fast and ideal, and higher cost, the whole idea of using cheaper drives for data came to desktop. It was used already before then on other systems for years.
    Using the drive bays, SATA II and 250MB/sec is still an improvement. But even new 4TB drives are 150MB/sec and above. Back when 320GB drives were used they were not even able to achieve 100MB/sec, more like 80MB/sec. And SSD has a lot of other benefits. So yes today's SSD will make a difference.
    I would just clone to 500GB SSD and try it! your last clean install was less than a year ago and yet still using older drives that are slow. Small SSDs have not without firmware and controller changes in the last two years able to perform as fast as the 250GB and larger. Larger SSD, more channels. An SSD has 4 channels on 128GB but 8 channels on 250GB which can all act simultaneous and concurrently to shovel I/O. Plus near-zero seeks and access times, and 90,000+ I/Os per second.
    128GB $80 will work and make a difference though if price is the main concern and not speed. Also, with an SSD free unused space is more important. A deleted file is not "deleted" and the SSD "page" (NAND) is not freed up until it is trimmed.

  • Which is the optimal hard drive configuration for Logic Pro ?

    hello people
    i would like to ask your advices about possible hard drive configurations for Logic Pro
    I have a Mac Pro and thinking to buy 4 x 500GB drives .
    there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
    model 1 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
    which means to using 4 hard drives as 2 drives
    model 2 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 Single drive for Sound banks (500)
    1 Single drive for Recording (500)
    which means to using 4 hard drives as 3 drives
    Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
    and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
    I am kinda rookie for these subjects :/
    thanks in advance

    heelo blayzay
    thanks for the reply and assistance.
    1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
    2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
    For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
    thank you again.

  • New hard drive in a Mac Pro - my experience.

    After taking delivery of my MacPro I was keen to add an extra hard drive to use in conjunction with amateur level video editing and photo imaging software.
    At first I bought a 3.0 Gb/s, 320 GB Seagate 7200.10. and it worked Ok but did not seem any faster than the OEM drive (250 GB Western Digital SE) . XBench confirmed that it was in fact 20% slower overall.
    I then consulted this forum and read the many posts re the Seagate firmware problem and other suggestions for suitable hard drives. To be honest it was all great stuff but, for me, a little overwhelming. So today, back went the Seagate in exchange for a 3.0 Gb/s, 250 GB, Maxtor Diamond Max 10 which was all I could afford. I installed the drive, what a dream the MacPro is, partioned it and ran XBench. The Maxtor is 2.5 to 3 times faster than the Seagate and is a quiet drive.
    So if you, like me, want a single, affordable fast and quiet drive, the Maxtor does the job. I am sure other drives are just as good if not better but if you find the research confusing, the Maxtor seems to be a safe choice.
    Also, congratulations for reading this forum before making a purchase - it saves you the 20% restocking fee for returns!

    I want to install another hard drive in my Mac Pro. Just looking for something in the 250GB or smaller range - Western Dig. Maxtor, etc.
    I see plenty of SATA 3Gbs drives - what do I look for in terms of specs. The dimensions are listed in the Mac Pro booklet, however, what type of connector is needed or not needed - seems no cables are needed... how many pins, etc.????
    Appreciate any help.

  • HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

    Hi,
    I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

    Typically this is caused by the internal list of compatible devices in the Mac being out of date.  All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue.  If that doesn't work, let me know.
    I am a printer tech for HP.

  • I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

  • I have a Mac pro(1 free bay) and a mac mini I need to back both of them  Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

    I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine)  Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
    What option has the faster GB/s?

    Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
    But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
    You should always have off line backups and don't rely on just one backup set or just TimeMachine.
    WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
    http://www.amazon.com/gp/product/B008JJLW4M/
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.bombich.com/software/updates/ccc-3.5.html
    Clone to internal, TimeMachine to NAS is one way to go at it.

  • How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder

    How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder?  I have files on this drive that I don't want to loose or corrupt.

    If you mean you dragged the hard drive shortcut out of the sidebar of a Finder window, you're quite all right - that's just a shortcut and you haven't lost any files. You can get it back by going to Finder preferences (the Finder menu, then Preferences), click Sidebar, and tick the "hard drives" box fully to show all hard drives.
    Post back if you did something different though.
    Matt

  • I recently installed a 2nd drive in my Mac Pro.  I wanted my pictures on the new drive so I moved the Picture file there.  I also upgraded my iPhoto.  Now iPhoto doesn't know where many of the photos are.  Any quick fix?

    I recently installed a 2nd drive in my Mac Pro.  I wanted my pictures on the new drive so I moved the Picture file there.  I also upgraded my iPhoto.  Now iPhoto doesn't know where many of the photos are.  Any quick fix?

    Launch iPhoto with the Option key held down and select the library on the other hard drive from those listed in the window:
    OT

  • How do I set up an internal drive in my Mac pro as a mountable network drive

    Hi! I basically would like to know how to use one of the internal hard drives in my Mac pro as a mountable network drive to enable me to do full time machine backup and restores for my MacBook pro. Thanks in advance for the help!

    If it's just for you, you can access and or all of your Mac Pro drives from your MBP just by logging onto the Mac Pro using the Mac Pro name and password. This is a very bad idea unless you are in a trusted environment but if you're on a home network and you trust yourself, it really works.
    I've been using this technique for years on a gigabit LAN in my home. It also works logging on the other or both ways. Just pay attention to things like re-boots and shut-downs.

  • How can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

    how can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

    Mac OS X 10.9.2 is 12 years newer than 9.2.x.    You need to make sure that Spotlight has indexed the external hard drive by adding it and removing it from Apple menu -> System Preferences -> Spotlight -> Privacy.   Check the menu for it:
    to determine if indexing is still going on, as it will say indexing.
    Alternatively, you can use a non-Spotlight tool, such as:
    http://apps.tempel.org/FindAnyFile/
    http://www.devontechnologies.com/products/freeware/ - EasyFind
    http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement for MacKeeper, do not download).
    http://www.barebones.com/ Textwrangler has a Search file for content, which works on any Text file.

  • Want to add internal hard drive to my Mac Pro

    I want to add an internal hard drive to my Mac Pro bought in 2011
    Running Lion 10.7.5  Processor is 2.8 GHz Quad Core Intel Xeon
    Have a 1TB SATA
    Do I need a 2.5" or 3.5" ? Any other criteria i should know about when looking?
    Advice is appreciated.

    For a Mac Pro you'll probably want to go with a 3.5" drive. I would recommend Hitachi. I put a 2.5" new model Hitachi in my laptop along with an SSD and the Hitachi HD is unbelievably fast for a "spinner." If that's how there 2.5" models are there 3.5" models will only be better.
    Make sure none of the drives you use have a variable rotational speed. Some of the Western Digital Green drives have that and they go to sleep a lot. When they sleep they have to wake up and when they wake up it causes a delay. It won't happen if the drives in constant use but it can be annoying. I believe the Green drives are intended primarily for backup use where speed isn't critical but energy savings and longevity are.
    These are my opinions and observations.

  • I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
    If you have another Mac, you may be able to use FireWire target disk mode.
    If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

Maybe you are looking for