Ideal import and export settings to make a master (uncompressed file)

editing in FCP VERSION 6.0.5 ON A MACBOOK PRO. The footage I'm working with is one 26 GB Quicktime file (16 minute duration), standard definition, 725 x 576, 10 bit uncompressed.
Basically I need to make this file, which is a short film, 1 minute shorter to be eligible to enter it into the Cannes Film festival next week.
What would be the ideal import and and export settings to make a new master e.g. to create a new file that is most uncompressed.
I very much appreciate your help!

It seems that every time you reply your goal has changed.
If you're worried about the self-contained movie requiring FCP to open, that's a simple fix. Right-click on the file and choose Get Info. In the Info window, change the 'Opens With' to QuickTime Player. You'll maintain the best quality and others won't need FCP to open it.
-DH

Similar Messages

Import and Export settings and presets

Thanks in advance.
Where can I save all the different import and export settings? Like if I just want to export Quicktime with audio and save that setting so I don't have to reset it every time. Thanks

I don't think you can in QT... You can in FCP by selecting CUSTOM as your setting when exporting to QT. Just rename the settings from custom to what you'd like it to be.

What are the best import and export settings? I'm losing lots of quality in iMovie...especially in the shadows?

I am creating timelapse videos using Quicktime pro's Image Sequence. I then save them and import them into iMovie. Problem is...when I bring them into iMovie...I lose tons of quality it seems. The shaddows get all blocky and pixelated? Then when I export the movie...it's even worse. I'm creating this footage from images taken on a Nikon D3s so the footage should be CRYSTAL clear...and IS in Quicktime Pro at the beginning...but when it's brought into iMovie it's like it gets all compressed etc. How do I create beautiful stunning footage that doesn't look compressed and pixelated? Thanks!

> You just need to use a larger file or settle for less quality
This is not always exactly true. There are many things that can affect the perceived quality. In Premiere's case:
1.) Deinterlacing: If your sources are interlaced, Premiere (by default) will deinterlace them before scaling down for web export. Premiere's deinterlacer is as bad as it gets. If you are doing a ratio >= 2:1 (such as 480i -> 240p) it is probably better to untick the "deinterlace" checkbox, as the line-pairs will be blended on output anyway because of the large scaling ratio.
2.) Soft scaling: Premiere's Bicubic resampling is not really ideal for large ratio reductions. Unfortunately, there is not much way around this without using other tools.
3.) Noise: Video noise can greatly reduce the efficiency of encoding -- and therefore, when using a set data rate, it makes lowers quality output. Premiere does have a noise reduction filter option in AME, but it is quite slow and not the most sophisticated solution. You may want to experiment with it anyway: It can potentially make low bandwidth encodes look much better.
4.) Frame rate: It seems like a basic concept, but many people forget that you can greatly increase your spatial quality by reducing the frame rate. If you can live without the motion smoothness of 30 fps, you can get much higher quality with 15 fps at the same data rate.
5.) Two-pass Encoding: Unfortunately, Premiere does not have 2-pass for FLV VP6 which, IMO, is probably the "best looking" web output. You should look at other tools like Sorenson Squeeze or On2 Flix. In these cases you'll need to export a lossless intermediary AVI file to maximize quality.

CS3 - Import and Export Quality Problems with Canon S90 .mov files

Hi Folks,
I have spent several hours searching with no results in the forums, and I am a beginner with Premiere, so I apologize for any annoying questions I may post.
Here is the problem I am having. The very first step! Go figure.
I have videos taken with a Canon S90 point and and shoot camera, in .mov format, 640x480, 30 frames per second.
When I play these videos in Quick Time or Windows Media Player they look great. Very sharp and smooth video.
When I import these videos into Premiere Pro CS3 - and don't do anything to them besides play them in either the source window or or Program window, the quality is much lower. They are not sharp, and have an unusual texture, almost like there is a tiny bit of water on the lens distorting the view as it moves.
I imported the video under the DV-NTSC Standard 48kHZ preset. I have the most updated Quick Time.
I also attempted to improve the view settings to their maximum with no results. I also exported the video to see if it was just the viewing, but the exported video is even worse. Very low quality and not sharp.
Thanks for any suggestions on the correct settings to import these videos without loosing quality.

Well, I have read and understand the Codec aspect a bit. I have discovered that my
files are avc1 H.264 Codec. Doing more research it appears that CS3 Premiere Pro has some trouble editing H.264 files.
So from what I gather so far, it looks like my best bet would be to convert the file into another format that is easier to edit by Premiere.
Is that correct?
If so, I am still unsure what to convert it to.
What is the program that is best to use to convert with?
Thanks again for your help.

When to use import and export directives?

I'm very confused about what the import and export language extensions do and when one should use them.
I have a Bridge application with multiple source files. As long as I don't call code in another file from the startup execution path (before all source files are loaded) and only call across modules after Bridge is running (e.g. from events in Bridge), I don't seem to need import and export. All source files seem to be in the same namespace and all can see each other's global objects/functions.
So, when would someone use import or export? And, what is the #engine that the manual discusses in relation to import and export? If some of my source files are library files that I intend to be used by multiple different files/applications, should I be using import/export for that use? Or is this only applicable when there are somehow multiple JavaScript engines involved? And when would that situation arise?
--John

John,
The import and export directives don't really matter in Bridge. All scripts execute in the same namespace. That's why namespacing your scripts is crucial in Bridge.
The #engine directive creates another JavaScript engine instance containing the script with the directive. If you then wanted to use stuff from that engine, the import and export directives would be needed. But even with that, in Bridge, the main engine will contain the script. There will just be a second engine (you can see this in the ESTK) containing the same stuff. Since it's in the main engine, there's no point in using the import and export.
Some of the other apps, GoLive, for instance, each script executes in its own engine and namespace. And import and export are needed.
This could change in future versions, and if it does, we'll be certain to make sure everyone knows about it.
Bob

SQL server 2012 Import and Export Wizard missing Flat File Options

When using either the 32 or 64 bit Import & Export wizard selecting data source "flat file source" no options appear, compared to excel import , sql or another data source ? tried uninstalling etc, build a VM 2008
Server works fine options appear. Any sugguestions before I rebuild my laptop ?
Stage that the Next button is optional, (usually greyed out)
TITLE: SQL Server Import and Export Wizard
The operation could not be completed.
ADDITIONAL INFORMATION:
The server name is not specified. (DTSWizard)
BUTTONS:
OK
Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR

Hi mtech,
When I open Import and Export Data(64-bit), I choose “flat file source”.
Maybe you could try to reinstall it.
If you have any feedback on our support, please click
here.
Thanks.
Maggie Luo
TechNet Community Support

Confused about import and export formats

I have a load of 8mm video footage that I want to archive before the old camera dies. As a first step I have used my DVD/HDD recorder attached to my TV to save the footage from the camera, do a little bit of editing and then burn onto DVD at the highest quality available. Doing this I can get 60 mins of footage onto each DVD and the quality is a good as the original. I now want to play with a few of these by importing into iMovie 09 so that I can add a few titles and link clips together with a few transitions. Nothing too complicated. Here's where I get a bit lost with all the formats available to me for importing and exporting. What's the best way of doing this? Having read around a bit it looks like conversion to DV is good for getting into iMovie in the first place. To do this I have tried using MPEG Streamclip and it looks OK, but what about all of the settings options DV25, DVCPRO25, DVCPRO50, frame blending, downscaling etc etc no idea what any of this means. Then having added a few bits and pieces, what's the best way of saving it again to make sure that I keep the quality as high as possible - DV? Ultimately I'd like to have the edited movies back on DVDs with the footage quality the same as I started with i.e. no compression artefacts. If I save the final version in DV format I could then keep copies to view with Quicktime and then do I just use iDVD or MPEG Streamclip to convert to a format playable on a DVD player. Is there any guide somewhere as to what all of the different formats are for pro.s cons etc. Also confused as to why files get bigger and bigger e.g. a 20min clip on a DVD is about 1.5GB, but when converted to DV becomes almost 5GB. I can understand how compression makes files sizes smaller, but what's happening here??
Neil

A Quick Time .mov movie can play on any PC as log as they have the Quicktime player
free http://www.apple.com/quicktime/
To do it, open iMovie, pick you project, then "Share to Media Browser" and pick the "HD" setting. It can take hours/movie depending on their length. Once it is done you can find it inside the iMovie project's file. TO get there, go to Users Folder -> your User name folder -> Movies -> iMovie projects -> and find the project that you made the movie from. Right click on that file (or use the control key as you click on the file) and you will see a menu -> Show Package contents -> Movies and your 720p .mov movie will be in that Movie folder. you can drag it to your desktop and copy it to your external HD or flash drive.
roger

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Import and Export in 4.6b

Hi All,
I have a syntax regarding Import and Export statements which are not working in 4.6b. Below is the statement.
IMPORT ID = (Internal Table) FROM DATA BUFFER ( String Variable ).
EXPORT ID = (Internal Table) TO DATA BUFFER ( String Variable ).
What can we have alternate to above statements ?
Actually I need to transfer or export some internal table content to String and Import the same data from string.
I am looking perticularly about buffer only. If not that what can we have alternate to that ?
Thanks,
Ram

Hi
You can try to use Field symbols also, for example
you need to code in the target program.
field-symbols <fs_itab> type standard table.
assign '(PROGRAMNAME)ITAB[]' TO <FS_ITAB>.
example, i did this in user exit
assign '(SAPMV50A)XLIPS[]' to <FS_ITAB>.
if <FS_ITAB> is assigned.
code will continue
make sure program name is in capital letters.
Regards
Madhan

SQL Server Import and Export Wizard Issue

i am trying to export SQL data into excel to send out weekly reports. I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data. In preview I see all of the data yet it fails on the
Pre-execute with the below. It creates the excel file with just the header. I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine. I am selecting excel 2007. Any ideas welcome.
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
(SQL Server Import and Export Wizard)
Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
(SQL Server Import and Export Wizard)

Hi astro,
Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Regarding import and export statement

hi experts,
how to import and export the internal table between programs...
Nice solutins with maximum points.....

Example of a program exporting an internal table to ABAP memory.
Prog 1
parameters: pa_vbeln like vbak-vbeln.
data: itab type standard table of vbak.
* get data to fill the table
select * from vbak into table itab
            where vbeln = pa_vbeln.
* now store the internal table to ABAP memory
export itab to Memory ID 'table''.
* here we call another program, prog 2
submit prog2 and return.
Prog 2 -> This imports the internal table exported by prog 1 and writes the content of the internal table to a list
data: jtab type standard table of vbak,
       wa_vbak type vbak.
* importing the itab that was exported by prog1
import itab to jtab from memory id 'table'.
loop at jtab into wa_vbak.
write:/ wa_vbak-vbeln,
        wa_vbak-erdat.
endloop.
* clear the specific memory id after required processing is complete
free memory id 'table'
Hope this solves your problem.
Cheers,
Sougata.
Subas,
Copy/paste your code, I'll have a look. First check if data is being selected before Export command.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:31 PM
Also make sure you create prog2 as an executable program. Then, run prog1 with a valid Sales Order number. To understand it more clearly run it in debugging mode and step through. It should work fine in any system.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:42 PM

Import and export statements

I am trying to use import and export statements in two different programs . The control from one program goes to another program with the function modules they have . I dont see the value while importing.
export i_field1 to memory id 'bus_ind'
import val1 to memory id 'bus_ind'
i gave only the memory id as common name

Please make sure that the variables used are the same name and defined exactly the same in both programs.
export i_field1 = i_field1 to memory id 'BUS_IND'.
import i_field1 = i_field1 to memory id 'BUS_IND'.
Regards,
Rich Heilman

Import and export of a project.

Hi,
I want to know the steps of import and export of a project.
1.I am using DTR.
2.I selected a track, after that a SC.
3.There are a lot of DCs.
4.Now i am to select some DCs.
5.there are five DCs that makes an application.
Questions:
1.How i am to create the application in WD prespective??
2.After creation application in WD, how i am to deploy the application(with all DCs)??

Hi,
Right click on the DCs which you want to get in the IDE and select Create Inactive Project.
If it prompts for the dependencies select them.
Once this is done u will be able to see the project in the WD perspective.
Now right click on the DC and select Development Component -> Build .
then Development Component -> Deploy.
If its there are any errors related with hard references deploy those DCs first and try.
Regards
Ayyapparaj.

Ideal import and export settings to make a master (uncompressed file)

Similar Messages

Maybe you are looking for