Ideal interface? My digidesign sorta ***** - at least for me.

Any ideas on a good (say 4-8 inputs) interface? I've never been able to connect well with the digidesign 2 input thing (which i got originally for protools). looking for something that will work well with logic. thanks!

Hi
I'm getting good results with an Alesis io|26 firewire interface.
8 metered mic/line inputs with inserts +18 additional inputs via 2 ADAT lightpipe connectors and SPDIF, 8 analog outs + SPDIF out. Great software input monitor mixer. 2 discreet and assignable headphone outputs. 1 MIDI in and out.
Built like a tank. Screwed and bolted connectors, not IC card mounted connectors and pots. High quality pots.
Regards
bb

Similar Messages

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Error when using sort variant 0005 for RABEWG01 (tcode za353)

Hi SAP experts,
I have a problem with program RABEWG01 (tcode za353). When I use sort variant 0005 and execute it, I get this error:
Table ANLV is not supported in the requested report
Message no. AB066
Diagnosis
You requested sort version 0005 for the current report. The sort version contains a field in table ANLV. However, the report does not process this table. Therefore the sort version cannot access this table and this field.
System Response
The report is not executed with sort version 0005.
Procedure
Enter a sort version that uses only valid tables. The following tables are supported in the current report:
ANLAV ANLB
Can someone help me to explain why ANLV is not supported in the requested report? If we can't use sort variant 0005, why is it there in the first place?
==========================================
Field:
Company code: 001
Report date: 30.03.2011
Dep area: 01
do I need to add any more entries in the field so that i can use sort variant 0005? thanks!

Hi,
note 21719 explains the reason for he error:
" Fields from tables ANLP and ANLV can only be used in a sort version if
the same tables are used in the relevant report (currently only the case
with reports RAGAFA01 and RAVERS01). If these fields are used in other
reports, runtime error GET_WA_NOT_ASSIGNED could occur..."
regards Bernhard

MOBILE ACCOUNTS ARE BROKEN!!! At least for Active directory.

Thanks ben6073 for posting your link to the solution. It worked for me as well.
I did a clean install of SL, joined the machine to the AD domain using Directory Utility. Restarted and when the other user option finally came up in the login screen it would just shake after entering my credentials. As if I was using the wrong password. I then logged in with the local admin account and using the Directory Utility disabled the mobile account option. I then restarted and was able to log in using my credentials.
MOBILE ACCOUNTS ARE BROKEN!!! At least for Active directory.
Thanks ben6073 for the link to a fix. And thank you Rich for the post on google.
http://groups.google.com/group/macenterprise/browse_thread/thread/2c2502b08bb84c 7a?pli=1
G

Greg Plassmeyer1 wrote:
Thanks ben6073 for posting your link to the solution. It worked for me as well.
MOBILE ACCOUNTS ARE BROKEN!!! At least for Active directory.
I had this problem this morning. It went away after I rebooted and ran applejack in "auto pilot" mode. The machine is a macbook pro running Snow Leopard. The account is a mobile account tied to a windows active directory server. Applejack is available from http://applejack.sourceforge.net/. The auto pilot mode cleans out the system caches is /Library and /System/Library - perhaps this is what provides the fix? Just a guess.

Can I sort the message for JavaMail??

Can I sort the message for JavaMail??
sort by From or sort by Subject or sort by Date and so on...
thanks~~

Get all the message objects via their headers, don't call getContent
unless you want to download the whole message. You can get their message
id's and their header contents such as subjects, from etc in one go,
next to no time...
With message id, subject, from etc...
You can sort by subject and with the new array, the first message id
in the array might be the 20th item on the server

Error: The sort order specified for distinct count records is incorrect

When processing a measure group with a distinct count measure in it, i get the following error:
"The sort order specified for distinct count records is incorrect."
I have no idea what this means - any ideas?

I had the same problem and your fix worked. In more detail, the problematic field was contract_no. I added a named calculation to the table in the Data Source View with the formula CHECKSUM(contract_no). Then I created the distinct count measure on that named calculation. And, lo and behold, the errors disappeared!
Thank you to Frank.
- CindyCindy P Hoskey

If any function like greatest or least for addition,subtraction and multi?

if any function like greatest or least for addition,subtraction and multi?
there are two columns 'a' and 'b'...i have to add the values in column wise
a b add
10 30 -->40
20 40 -->60
IS there any function?

Hi,
794244 wrote:
if any function like greatest or least for addition,subtraction and multi?
there are two columns 'a' and 'b'...i have to add the values in column wise
a b add
10 30 -->40
20 40 -->60
IS there any function?Do you mean something like
FUNCTION_X (a, b, c, d, ...)that would return the sum of all those numbers?
No, not that I know of. If there were, it would be harder to use than
a + b + c + d + ...The first is a comma-delimited list of columns, with a function name and parentheses.
The second is a +-sign delimited list, with nothing else needed.

Could not connect to wicd's D-Bus interface. Check the wicd log for er

Having issues getting wireless to work on Acer V3 551. Wired works great. I'm new to Arch from Ubuntu, so please be nice to me
On startup, I get two error dialog boxes:
#1: Could not connect to wicd's D-Bus interface. Check the wicd log for error messages.
#2: The wicd daemon has shut down. The UI will not function properly until it is restarted.
Network info:
23:01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
24:02:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
wicd-curses terminal output:
wicd-curses
Can't connect to the daemon, trying to start it automatically...
Traceback (most recent call last):
File "/usr/share/wicd/curses/wicd-curses.py", line 1043, in <module>
setup_dbus()
File "/usr/share/wicd/curses/wicd-curses.py", line 1031, in setup_dbus
dbus_ifaces = dbusmanager.get_dbus_ifaces()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 36, in get_dbus_ifaces
return DBUS_MANAGER.get_dbus_ifaces()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 62, in get_dbus_ifaces
if not self._dbus_ifaces: connect_to_dbus()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 48, in connect_to_dbus
return DBUS_MANAGER.connect_to_dbus()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 79, in connect_to_dbus
proxy_obj = self._bus.get_object("org.wicd.daemon", '/org/wicd/daemon')
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
follow_name_owner_changes=follow_name_owner_changes)
File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
self._named_service = conn.activate_name_owner(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
self.start_service_by_name(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
'su', (bus_name, flags)))
File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.wicd.daemon.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.wicd.daemon.service' for details.
systemctl status dbus-org.wicd.daemon.service terminal output:
dbus-org.wicd.daemon.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
I've tried:
- beginners install suggestions
- arch wicd suggestions
- unin/re-installing wicd
- google research to no avail

Apologies. First post to the board - will keep post within bracket tags. Sorry for being such a noob.
Input
$ systemctl status wicd.service
Output
wicd.service - Wicd a wireless and wired network manager for Linux
Loaded: loaded (/usr/lib/systemd/system/wicd.service; disabled)
Active: failed (Result: exit-code) since Wed 2013-05-01...
Process: 972 ExecStart=/usr/sbin/wicd --no-daemon (code=exited, status=1/FAILURE)
Starting Wicd a wireless and wired network manager for Linux
It seems like the daemon is already running
If it is not, please remove /var/run/wicd/wicd.pid and try again.
wicd.service: main process exited, code=exited, status=1/FAILURE
Failed to start Wicd a wireless and wired network manager for linux.
MESSAGE=Unit wicd.service entered a failed state.
Any thoughts?
Last edited by roastymctoasty (2013-05-01 15:58:17)

Sorting and null for monetary values in a report

All,
I think this should be an easy one, and I've just missed something obvious.
I have a standard report in APEX 3.2.1 that includes a column with a monetary amount in it. I want the column to show the UK Pound sign, be sortable, and show nulls where appropriate.
The issue I have is I can't find a way to achieve all 3 in a satisfctory way. As I see it the options would be:
1) In the SQL for the report, concat the pound sign to the column required, e.g. SELECT '£'||amount FROM....
The issue is that this makes this field a CHAR field, so sorting would not sort in the same way as for a number field.
2) Use the Number format FML999...etc. in the Column Attribute.
The problem with this is that this is a multi-country database, and the default monetary unit is set to the US dollar.
3) Use the HTML expression box in the Column attribute to display £#COL#
This fulfills the pound sign and retaining the number format, but unfortunately a null value is displayed as a £ sign with no numbers. I can't think how to get it to leave that value in the report as completely blank.
As I said, I'm sure I've missed soemthing obvious. If anyone can spot how to achieve this it'd be much appreciated.
Regards,
Jon.

>
2) Use the Number format FML999...etc. in the Column Attribute.
The problem with this is that this is a multi-country database, and the default monetary unit is set to the US dollar.
>
The NLS currency symbol can be modified on the fly if you have some means of identifying user location/preference: {thread:id=990848} (ignore the last post)
However, it probably doesn't make sense to do that—£100 ≠ $100 (at least I hope not!)—unless there's some kind of conversion occurring in the report? Is there a currency stored along with the amount?
>
3) Use the HTML expression box in the Column attribute to display £#COL#
This fulfills the pound sign and retaining the number format, but unfortunately a null value is displayed as a £ sign with no numbers. I can't think how to get it to leave that value in the report as completely blank.
>
Use 2 columns, one for the amount, and one for the currency, with a switch to include or exclude the latter as necessary:
select
          ename
        , comm amount
        , nvl2(comm, '£', null) currency
from
          emp
where
          job in ('SALESMAN', 'MANAGER')
ENAME      AMOUNT                 CURRENCY
ALLEN      300                    £
WARD       500                    £
JONES
MARTIN     1400                   £
BLAKE
CLARK
TURNER     0                      £                                Then use both columns in the Amount HTML Expression:
#CURRENCY##AMOUNT#

[SOLVED - at least for me]annoying TAB sound just won't die...

Hi,
I've added this for the MODULES in rc.conf:
MODULES=(!pcmcia !pcmcia_core !pcspkr !snd_pcsp powernow-k8 cpufreq_ondemand)
and still I hear this annoying sound when I hit the <TAB> in the console, over and over and over again....
I've disabled the pc speaker and its sound module, and I have configured the ALSA using alsaconf succesfully (the sound is crap on my HP Compaq 615, but that's because of the speakers, not Linux). Still if I run the "alsamixer" command, I can see the volume of the pc speaker right there, but if I change the PC speaker volume the system volume is not changed. Is there an alsa "beep" sound for the <TAB> i need to kill somewhere? This mind boiling sound I hear every time in xterm when I make an error of some sort in the keyboard, like when I'm working in Vim and I scroll to the top of the file and hit the line, etc.
lsmod gives me this output:
http://pastebin.com/uYHcmp8V
Any advice?
Last edited by tomislavski (2010-04-02 07:13:51)

@tomislavski:
I believe your internal beeper is controlled by the drivers for your soundcard instead of the generic pcspkr-driver, since blacklisting pcspkr and snd_pcsp had no effect. I also use the snd_hda_intel-driver on my netbook, and I have two separate controls for speakers in alsamixer - "Speaker" refer to sounds played through normal applications, while a "Beep"-control refers to those annoying console beeps. You could check if you have a similar setup, and in that case just mute the Beep-control.
Nareto wrote:I'm too having the beep on Tab etc. I did all of the above with no success.
The original poster had allready tried placing !pcspkr and !snd_pcsp in the MODULES array in /etc/rc.conf, which on most (older?) computers should be enough to disable the internal speakers system-wide. Did you try that too? You can test the procedure without rebooting by running:
su -c "rmmod pcspkr"
As for disconnecting the cable to the internal speaker, I don't think it was intended as a joke. I've done the procedure before, and at least on my desktop computer the internal speaker was quite easy to locate, and it was connected to the motherboard by a single, easily removable cable. If you're on a laptop however, the procedure might be a bit more bothersome.
Last edited by Peanut (2010-04-01 01:03:49)

Color sorting songs/playlists for library???

Is there an option, widget, or something I could use to keep track of what songs in my music library are listed on which play lists. Something along the lines of gmail and its colored lables.
The round about way I have to update my iTunes music library, if I am doing a rash of downloading, I forget what I've already added to my iPhone list.
playlists are such a visual thing, I just think utilizing our color vision would be cool.
secondary question that I havent spent much research on: I am only using iTunes because I have an iPhone, otherwise I love winamp. Is there any sort of way I can enqueue music from the my music folder in iTunes the way you can with winamp. I hate making playlists every day I want to listen to different 5-10 particular tracs in my music library. I want to be able to go to my music directory, right click the album folders or track titles and select "enqueue". Thats it.

Hi there I totally agree with you Sucks monkey balls Well, well, well, I SUGGEST to structure the playlists: for example by GENRE (ie JAZZ)and then by AUTHOR or INTERPRETEE (ie MILES DAVIS) or, at least ALPHABETICALLY and not by creation date!! Sorry if my English is not very precise, hope you understand it!

EPMA-Loading metadata using Interface tabes-Member sort order-Property?

Hi,
Any help would be greatly appreciated.
Version: 11.1.1.2
Loading metadata for planning app in EPMA using interface tables.
What property ( table , column) do I set to set the SORT ORDER for members within a dimension. I can arrange them manually by reordering children i nthe UI. The SYSTEM>sort order property does change manually after the metadata is loaded.
Thanks.
Edited by: user1658817 on Jun 26, 2009 9:06 AM

Some more info
I am loading members into Acount Dimension.
I am using following tables as source tables.
hs_account_hierarchy
hs_account_member
hs_account_property
hs_account_propertyArray
I use hs_account_propertyArray to load member Alias and member sort order.
Alias loads rightly. Sort order is not taken taken into account at all while loading. The sort order after the dimension is loaded is Alphabetical.
Sample records in my propertyArray table look like
Property Name Key Value
Order Common Stock Default 2
Order Warrants and Options Default 3
Order Additional Paid in Capital Default 4
Order Cumulative translation adj Default 5
Order Retained earnings (loss) Default 6
In the Load profile, I associate this Order property with Order property for shared library.
When the import is done, everything gets loaded properly, except for the SORT ORDER. The sort order is alphabetical. So the above members look like this
Additional Paid in Capital
Common Stock
Cumulative translation adj
Retained earnings (loss)
Warrants and Options
instead of being in the sort order mentioned above.
Thanks.

Account needs sorting once and for all PLEASE!

Hi, I have sent an email to moderators here as I did last time. Last time I was given a rebate, for incorrect bill. My bill AGAIN has not been worked out correctly. To be frank I am fed up of rubbish BT not sorting out my problems since September last year.
One thing cannot be done at a time, my whole account especially online is all in a mess, nothing is as it should be, and someone needs to go on a computer to go through it with a toothcomb to fix it. Rebate on a bill is not going to change the fact my bills are being generated incorrectly. STILL!
I wish to SPEAK by phone to anyone who can fix this as I am not going to continue this way with BT, and if they even try to charge me for no honouring my side of the contract, then I shall end up taking this up with a solicitor. I have even been charged £10 on my new bill for not honouring my direct debit, considering one of the foreign advisors had promised my bill would not go out my bank, but it did try to, twice and I was charged £50 from my bank, and you even try to charge me £10 for YOUR mistakes.
I am fed up. I have 8 months left on this so called contract. I do not intend to go on like this for that amount of time. I want my account sorted out once and for all PLEASE!
I apologise to you forum admin, and I know this is NOT your error, I am merely really frustrated at the lack of communication to fix my problems and have spoken via phone 3 times since my last forum entry to try fix my online account, and have been promised again it would be fixed and it is not.
Thank you

Hi thebillies,
We were looking into this for you and had reported a fault to try and get to the bottom of the discrepancies.
I'll make sure that you get an update on this later today.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Sort-by-type for column view in open/save dialog boxes?

Hello all,
I've done a fairly good search both on Google and in these forums and can't seem to find this question addressed. When I go to open or save something (in Preview, for example) I prefer to use Column View in the dialog box, since it is easy to see and navigate the folder structure. However, Column View always shows up sorted by name, even if I specified in Finder that the folder be sorted by type. Because of this, I have to scroll down and hunt for subfolders rather than having them conveniently listed at the top.
My question is this: is there a way to get Column View to sort by type in the open/save dialog boxes? (The Command+J that works in regular Finder does nothing in these dialog boxes.)
Thanks!

No. Column view will only sort by name. If you wanted to put a space before each folder name, then they will sort to the top. Sorting by Kind will put folders above files, but it will also put anything else except files at the top. If there are only folders, however, that would put them first in the sort list.

Sorting report columns for PL/SQL report

I have created a report of type "Pl/Sql function body returning Sql query" in which I am generating the column names within the query. I would now like to make the first three of these columns sortable. But when I click on the "sort" box for the first three columns, all my column names suddenly switch to "Col 1", "Col 2" etc.
As you can see by the following snippet from the PL/SQL that generates the query, the column names are data driven, so I'm not in a position to declaratively rename each column. As it happens, the first three columns names are fixed, but all the subsequent column names are data driven.
Suggestions on how to make the first three columns sortable while preserving the generated column names of the remaining columns?
thanks
susan weber
declare
query varchar2(4000); -- query
begin
query := 'select first_name "First Name", last_name "Last Name", encounter_date "Encounter Date" ';
for c1 in (select distinct attr_src, attr_code, attr_text, sequence_number from finding_vt)
loop
query := query || ', (select val_text from finding_vt vt where vt.encounter_id = e.encounter_id and vt.attr_src = ''' || c1.attr_src || ''' and vt.attr_code = ''' || c1.attr_code || ''' and sequence_number = ' || c1.sequence_number || ') "' || substr(c1.attr_text,0,30) || '"';
END LOOP;
query := query || ' from patient pat, encounter e where pat.patient_id = e.patient_id';
return query;
end;

This turns out to be related to the choice of "use generic column names" v. "use query specific column names".
I had chosen "use generic column names" just to get past the initial creation page. I then debugged the query creation sql, but never changed that setting back to "use query specific column names". The fix is to choose "use query specific column names".

Ideal interface? My digidesign sorta ***** - at least for me.

Similar Messages

Maybe you are looking for