Ideal temperature range and how to maintain it

Hi,
I bought a new MacBook last week. I have a little issue about its temperature. On Apple support page it says the ideal temperature range is 10 C to 35 C. However using iStat I see that my minimum CPU temp is always 45 C and when I do some intensive tasks or open more applications it goes up o 65-70 C. Is this OK? Whats the practical temperature range?
Upon searching through some forums, it seems I am not the only one that is getting this. But it really worries me as the base of the MacBook really gets warm. Also this cant be good for the internal chips. Please suggest some ways to maintain the temperature.
Thanks for the help.

Oh, I guess that representative may have said the wrong thing. Anyway, stedman1, do you know of a page on the Apple website that states the thing about the computer being 100 degrees Celcius?
Thanks.
Regards,
bettyfromcalifornia

Similar Messages

  • N86 temperature range and battery charging

    Hi there!
    I was wondering, can somebody tell me which is the working temperature range of the Nokia N86? I looked it up in the data sheet, in its manual, and it's nowhere to be found. I'm asking this because there are some damn chilly times over here (about -17 C) , and really don't wanna damage my phone.
    Also, can the usb charging damage the phone's battery? I mean, I'm plugging and unplugging the USB cable pretty often, therefore the phone is "mini-charging" a lot, so to say. It's my first USB charging phone, until now I was used on charging the phone once a couple of days only, so I'm at least curious about it..
    Thanks!
    Message Edited by zomgdude on 19-Dec-2009 08:07 PM
    If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!
    Solved!
    Go to Solution.

    Hi zomgdude
    Nokia are strangely reticent about device operating temperatures but I think that I have seen -40 Centigrade to +85 Centigrade quoted as temperature testing range for devices, although what parametesr refers to a successful outcome are not made clear.
    For an iPhone containing similar components storage environment is quoted as between -20º and 45º C and operating environment as between 0º and 35º C with either short battery life or thermal cutout expected at either end of quoted operating range as you might expect.
    Message Edited by scoobyman on 20-Dec-2009 02:30 PM
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to save an XML file with a proper name and how to maintain the history?

    Hi All,
    As per the requirement, I have to remane the name of the XML file which is under the KM repository Userhome/personaldocuments based on the user logon information.
    I have created a Repository service for the same and following is the code for the same. The service is working, but only for the first entry in the XML form. Second onwards, the file does not get remaned to the preferred one.
    Request you to throw some light as what is wrong or missing in the code, so that I can follow the right approach. Many thanks in advance.
    // Code snippet is here//
    //Starts here//
    com.sap.security.api.IUser epUser;
                                            epUser = UMFactory.getAuthenticator().getLoggedInUser();
                                     String EntID = epUser.getUniqueName();
    IResourceContext resContext = null;
    try {
         resContext = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
    } catch (ResourceException e1) {
              e1.printStackTrace();
    RID rid = RID.getRID("/userhome""/"EntID+"/Personal Documents");
    IResource resource = null;
    try {
         resource = (ResourceFactory.getInstance().getResource(rid, resContext));
    } catch (ResourceException e2) {
              e2.printStackTrace();
    ICollection collection = (ICollection)resource;
    IResourceList resourseList = null;
    try {
         resourseList = collection.getChildren();
    } catch (AccessDeniedException e3) {
              e3.printStackTrace();
    } catch (ResourceException e3) {
              e3.printStackTrace();
         for(int i=0;i<resourseList.size();i++){
              IResource res_new = resourseList.get(i);
                try {
                   res_new.rename("Address_new.xml");
              } catch (NotSupportedException e) {
                                  e.printStackTrace();
              } catch (AccessDeniedException e) {
                                  e.printStackTrace();
              } catch (ResourceException e) {
                                  e.printStackTrace();
    //Code ends here//
    Regards
    DK
    Edited by: DIPENDRA MOHANTY on Jun 5, 2009 5:20 PM

    Hi,
    The code seems ok.
    But you have mentioned about a KM Rep service, what service is that? which event it is listening to?
    Regards
    BP

  • In range and coerce

    I want to make a VI that will show me how many random numbers from 0-100 range should be generated. After that VI should draw a histogram, showing how many percent of numbers were from 0-49 range and how many from 50-99. There should also be two numeric indicators showing how many numbers were from both of those ranges.
    I use "In range and coerce", but for example if I generate numbers: 78, 97,74;
    First "In range and coerce" (50-99)" will show output: 78, 97,74, which is correct.
    But second "In range and coerce" (0-49)" will show output 49,49,49 which I dont want; I just want to show in this example one zero.
    After that I will connect both input to histogram, will be OK ?
    See picture, thanks
    Rookie; LV 2011 on WIN 7
    Solved!
    Go to Solution.
    Attachments:
    project 3.vi Front Panel _2.jpg ‏68 KB

    Yes I know that but I have probelms, that from 3 input numbers,"in range and coerce" function make:
    78, 97,74  and  49,49,49;
    From 3 input numbers I need 3 output not 6 :/. If it's not in range, why than show 49,49,49 ?
    After that I will make front side as this on picture
    Rookie; LV 2011 on WIN 7
    Attachments:
    project 3.vi Front Panel _2.jpg ‏68 KB

  • How to maintain Customer distribution model in ALE

    hi FRIENDS..
      i wish to know what will be the transaction code of maintaining the customer distribution model, and how we maintain it.  and also distribute custome model in IMG sreen... please reply me...i will surely award you  nice points....
    bye...
    naim

    U can create/maitain distribution model using BD64.
    Or else u can create it using SALE transaction code.
    U need to give sender/reciver/msg type.
    ==============================================
    procedure:
    click on Create Distribution model button-->give the technical name
    select the DModel Technical name>add msgtype>
    it will ask sender/reciver/msgtype.
    pass those parameters and generate partner profiles through environment menu
    =================================
    to distribute a model view to partner syste,:
    Select mview
    edit>modelview>distribute
    Message was edited by: Eswar Kanakanti

  • How do I make image backgrounds black and white while maintaining color in the foreground objects?

    I have a close up close-up image of an orchid with blurred background.  I am trying to make the background black and white while maintaining the foreground color on the petals, buds and stems.  Any ideas?

    Use the Blank & White Brick and either brush the effect onto the background or brush is away from the foreground.  "Detect Edges" will help control the edge of the mask.
    You might be interested in knowing that you can brush on/away masks of different strengths, and thus produce effects in between 0% and 100%.
    Search the forum -- there are several good posts detailing how to create this effect.
    Sample search.
    Message was edited by: Kirby Krieger -- added sample search.

  • I just purchased an airport extreme router to increase the range of    my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    sylviafromhanover wrote:
    So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that. 
    Yes, that is correct.
    Did you have the instructions that came with your Airport Extreme?  Are you sure you have it setup properly?  Here is the setup guide:
    http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf 
    Ensure you have everything setup properly.  Once you do this and if you are still having trouble, follow Star's instructions. 

  • How to add standard text in PO and how it is maintained ?

    How to add standard text (paragraph) in PO and how it is maintained ?

    Hi
    Please go through this document.which has a step by step
    Working with Frequently Used Texts
    Use
    You can copy texts from various sources to create PO texts:
    Standard texts
    Certain standard texts are supplied with the system and can be assigned to a purchasing document in Customizing.
    The content of some standard texts is predefined by your system administrator.
    You can also create standard texts yourself and copy them into purchasing documents.
    Master records
    Database fields
    Activities
    Creating Standard Texts
    You can create your own standard texts via Tools ® SAPscript ® Standard text.
    Inserting Standard Texts
    You can insert your standard text on the long text screen via Insert ® Text ® Standard.
    For more information, refer to the Basis documentation under BC Word Processing with the SAPscript Editor:  Including Texts.
    You can display the print preview via Text ® Print ® Print preview.
    Inserting Texts from the Master Record
    There are three ways of linking texts from a master record with a purchasing document. The relevant settings are made for each text type in Customizing for Purchasing. The indicator in the status column shows the nature of the linkage.
    Option                                              Indicator in status column
    The text is copied:               
    It is then independent of the text                 None
    in the master record. Changes to
    the text in the material master record
    have no influence on the text in the document.
    The text is displayed only:
    It cannot be adopted.                                          N
    The text is offered for copying:
    It can be copied via Header or Item ® Texts ® Adopt text. (In requisitions: Goto ® Texts ® Adopt text.) Changes made in the master record will also be adopted in the document until such time as you copy the text.
    Inserting Texts from Database Fields
    You can include the content of a database field at any point in the text on the long text screen. A value specific to the relevant document is displayed in the printed document.
    Choose Insert ® Symbols ® Program symbols.
    Choose DDIC fields.
    Search for the relevant table/structure (in the case of PO items, this is EKPO) and then choose ENTER .
    Choose the relevant table field.
    Choose Text ® Print preview to see the print preview.
    Reward if useful
    Aasif

  • How to modify a select option without range and mutiple selection??

    hi all,
    i need to modify a select option by removing the range and option for multiple entry. i other words i need to make select option as parameter.( because i cannot use parameter in my program due to some constraints.)
    is it possible to change the select option as per my requirement if yes please let me know how is it possible.
    Thanks in advance.
    Sreekanth.

    hi,
            Yes u can use code like following way..
    select-options : s_matnr for mara-matnr no-extension no intervals.
    Reward if helpful.
    Regards
    Gagan

  • How do I select notes in a given velocity range and fix them to a new value

    Hello. How do I select notes in a given velocity range and fix them to a new value? I believe you can do this with the Transform window, but I can't figure it out. I can select ALL the notes and fix them to a value. But I want to select the notes within a range (and there are many) and fix them to a new value. Thanks for your help.

    The transform window will also select, as well as operate.
    Select Notes = Velocity within 20 > 40 (or whatever) and click Select only.
    You've just selected all notes within that velocity range. You can now use different transform criteria to "Operate" only on that selection, or use the other editors with those notes selected.
    For more on transform:
    http://logicquicktips.blogspot.com/2006/10/transforminating-part-1.html
    http://logicquicktips.blogspot.com/2006/10/transforminating-part-2.html
    http://logicquicktips.blogspot.com/2006/10/transforminating-part-2a.html
    http://logicquicktips.blogspot.com/2006/10/transforminating-part-3.html

  • How to maintain the documents like PDF, EXCEL and WORD in database

    Hi,
    I am working on UI, I am tracking the COREMODS data using this UI. My requirement is need to maintain the related documents also in database using this UI. I think SLM system have that functionality. If any one know about this functionality, explain about
    How to upload the documents into database.
    How to maintain this documents in database.
    Is there any standard methods/function modules to upload this documents ( I am not asking about content of document, I am expecting about total file).
    i.e. I want to maintain the all core mod related test cases and other documents in SAP database.
    How to handle this functionality?
    Rayudu

    hi,
    There is a Utility in SAP called Easy DMS.
    Here you can create folders, maintain authorisations and store your documents.
    Hope this is wht u r looking for.
    Reg,
    Raj

  • TS3018 while trying to bluetooth my I phone 5 and GMC terrain, the blue tooth function is on, message appears: make sure GM is turned on and in range. How do I do this?

    while trying to bluetooth my I phone 5 and GMC terrain, the blue tooth function is on, message appears: make sure GM is turned on and in range. How do I do this?

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • How to maintain gap between table and graph in a report

    HI,
    I have a report in which a graph is placed below a table  and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

    >Right click on chart.
    >Open the property and go to the relative position.
    >Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
    >Repeat this for the distance of the lower left point of the chart.
    Hope this will help you out.

  • How to maintain space between value and base unit of measure in sapscript

    Hi Guys,
    I am working on an upgradtion project, i have problem like while upgrading from 4.6b to 5.0. i need to main a space between value and base unit of measure. can anyone letme know how to maintain in the form. I mean in sapscript.
    Thanks,
    Yogesh

    There are a couple of ways to handle this,  if you need a bigger space between, you can use tabs in the paragraph format.  Or you can just write the space in between the fields like so.
    ZA  &MSEG-MENGE& &MSEG-MEINS&
    Regards,
    RIch Heilman

  • How to maintain space between table and header in ssrs

    Hi Everyone, 
      I have created a report. In page header of this report, On First Page space between header and
    body is good , but from next page, space is not maintain. 
    Please suggest me how to maintain space at every page of report.
    Thanks. 

    Can you post a screenshot?
    This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
    - Vishal
    SqlAndMe.com

Maybe you are looking for