IdeaPad B590A - dropped into sleep mode when lid was covered and requests a password

Hello, dears! Sorry if I missed the section, I'm a newcomer
I bought my Lenovo IdeaPad B590A with Windows 8 a week ago. Having used it a bit I happened to cover the lid. My notebook turned into the sleep mode. It requests a PASSWORD now, but I have no idea what password?
Thus, now I have 2 screenviews upon Restart: 1) Screen with LENOVO sign and 2) screen with a profile photo (empty), the number " 1" and the line for a password. But I did'n created a password.
Some people recommended that I use Restart and then press F8 button for a 'safety regime' opening for Windows. The problem is the notebook does not show the Windows screen - only Lenovo screen and Rquesting password screen.
Is there any chance to remove this password request so that I could enter finally?
I'd be grateful for any advice,

Hi Ekaterina,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your B590A Laptop is waking up on a Password prompt which you have not created, but let me inform you that without creating the password for the current user account the popup will not be prompted at the startup. As it is displaying password for a Single user, I strongly suggest you to perform OSRI (Operating System Re-Install) using OKR (One Key Recovery) by clicking on OKR button provided in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 1 to locate the OKR button and page no. 27 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
User Guide Lenovo B590
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

I am running OSX Lion 10.7.4 and the computer no longer will go into sleep mode when I close the cover What happened with this option?

I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?

No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.

Mac mini didn't go into sleep mode when i am conect my thunderbolt display whit an optical thunderbolt cable

hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
has any body els this problem

Hello josfromkerkade. Please contact me so that I can get more details.
We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware.
[email protected]
Thanks, Mitch

HT201401 My phone won't lock or go into sleep mode when answering calls

My phone won't lock or go into sleep mode when making or receiving calls. Consequently I keep activating the mute or loud speaker buttons with my cheek. Can anyone help please??

That is a Proximity Sensor Problem, which is located above the earpiece speaker. Do you have a new screen protector or iPhone Case which could interfer with this?
Reset iPhone, Restore iPhone.
If you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution.

How do I get My IPHone 5c to go into sleep mode when not using

How do I set my IPhone 5c to go into sleep mode when not using

Are you saying the screen never turns off? That is controlled with auto lock in general settings.
IF your screen turns off, your phone is going to reduced power state, but still looking for events. This is standby, and you see published standby times for the different iPhones.
There is no other setting between this and turning off. So slightly different than a PC.

IPad doesn't go into sleep mode when guided access is enabled

My iPad doesn't go into sleep mode when guided access is enabled despite having set "enable sleep mode" to on in the settings menu. COnsequently, my battery life drains very quickly during the day as the screen doesn't dim or go into sleep mode at all. Help!

Seems this feature is lost with iOS 7.0.4. I just bought 4 iPod Touches for employee use and NEED to have sleep mode enabled for guided access to conserve battery life.
I did have 1 iPod that allowed me to enable sleep mode (and I tested that it allowed the top button to be pressed to immediately go to sleep), then after it ran the 7.0.4 upgrade it no longer allowed sleep mode when in guided access (I did not check the original version of iOS on the iPod but it was obviously older than 7.0.4).
Is there some new hidden way to turn this on or did Apple delete the option?

TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to error 3

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.

Hi, Milanista5
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

My macbook goes into 'sleep' mode when my mobile runs over the bottom left corner, next to the trackpad, does anyone else have this problem?

Not sure if anyone else has this problem. I only noticed it a few weeks ago when I left my mobile on the keyboard, towards the left of the trackpad. When I started typing I accidentally nudged my phone off the board and then everything went black. I hit any button and everything turned back on again. I'll assume that it went into 'sleep' mode. Is this normal or should I be worried about the health of my mac?

I am facing pretty much the same problem ... although sometimes the click does work on other parts of the trackpad, but largely I have to stay focused on the left bottom corner. It's getting slightly frustrating esp. because I like the click better than the "tap" and my MAC is only a month old!!
Is this a software issue or a h/w problem?
~ saumil

Lenovo thinkpad 8 not entering sleep mode when lid closed

RECENTLY I BOUGHT THINKPAD 8. I HAVE A PROBLEM. IT CAN'T ENTER SLEEP MODE. I CLOSE THE LID AND THE SCREEN IS ON. AT POWER OPTION IT IS SELECTED WHEN I CLOSE THE LID TO GO TO SLEEP , ON BATTERY AND WHEN PLUGED IN. THANKS FOR ANY HELP.
Solved!
Go to Solution.

I am not certain what you mean. Are you saying that when you close the cover it does not sleep? Are you certain you have a cover with the magnets that will put it to sleep?

How to Switch off sleep mode when lids closed?!

Does anyone know if you can turn sleep mode off when the lid is shut on a Powerbook G4!? If so HOW!?
Cheers
MIKE MIKE MIKE

Look here:
http://docs.info.apple.com/article.html?artnum=300562
Joe

IMac won't go into sleep mode when Kensington Dome Hub

Has anyone had problems with their computer sleeping when the Kensington USB Dome Hub is connected. This just started happening a few days ago. I isolated the problem and it is definitely the Kensington HUB -- there is nothing connected to the hub that should wake the mac up -- all I have plugged into it is a lacie dvd burner and an epson scanner-- Thanks for any advice.
Deanna

I would call Kensington and see if this is a known problem. I assume that you have checked and have downloaded the latest software for the hub, although I doubt that it has any.

MacBook - stop going to sleep mode When lid closed

Hi ,
I am using handbrake to convert video files on macbook .
I want to close the laptop lid and still want the process to run in background .
Some one mentioned that if the laptop lid is closed and the system is running it gets heated rapidly .
I want to do this for 45 minutes ( commute between office and home ).
So , how do I close the lid ( display ) and not allow the system to go to standby/sleep.
Thanks
macbook Mac OS X (10.4.9)

You could also use InsomniaX.
I do not think that it's that bad for your macbook (heat generation); see this article: How to use your PowerBook G4, MacBook Pro or MacBook with the display closed.
I would not recommend picking your notebook up, though, since the hard disk's heads could scratch your hard disk... That's one of the things standby prevents.
By the way; why wouldn't you use standby? Your mac goes in standby rapidly, and wakes up even faster!

My imac won't go into sleep mode when set

I have an older iMac and even though I have it setup in the energy ptreference area to go into auto sleep in never does unless I do it manually?

I've checked through my apps, I can't seem to find anything that would cause this. For some apps that have internet access I've turned them off.
I tried going into Activity Monitor and quitting all the running processes, including those for Finder and stuff, most of these system processes starts up again. But even when I have quit everything that I can quit, the computer won't sleep.
I've tried disconnecting the internet, unplugging all my extras and shutting off Time Machine, but still insomnia. I've tried logging into the guest account but still insomnia.
I went to Macintosh HD>Library>Preferences>System Configuration and deleted the com.apple.PowerManagement and the com.apple.AutoWake.plist, rebooting and testing. But still insomnia. I've also deleted the User>Library>Preferences>com.apple.systemuiserver.plist file, and still no succes.
I've removed all the widgets, removed all startup items, and still no success.
It's not really a big issue, but the fact that I can't find the cause is driving me crazy!

Macbook Pro doesn't go into sleep mode when battery dies. Help Please!

When ever my Macbook Pro gets low on battery power I receive the "battery is low message" and instead of just going to sleep a couple minutes later it just shuts down completely. Any reason for this?? I want it to go to sleep like it used to when the battery gets low/dead.
here is my battery info!
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 1526
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4557
Health Information:
Cycle count: 345
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1583
Voltage (mV): 12083
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 90
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Thanks for any help!!

Same exact issue on my MacBook Pro. It is brand a brand new model: MacBook Pro (June 2009), with Mac OS X 10.6.1 and "7 hour battery".
Model Information:
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0003
Hardware Revision: 0003
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 6515
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 6690
Health Information:
Cycle count: 27
Condition: Normal
Battery Installed: Yes
Amperage (mA): -936
Voltage (mV): 12311
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes

IdeaPad B590A - dropped into sleep mode when lid was covered and requests a password

Similar Messages

Maybe you are looking for