Ideapad K1 Rooting - Update Driver Software Error assistance please

I have been attempting to get my Ideapad set up with one of the ROMs, but I continue to get a driver software error.  The error I continue to get is the "NVIDIA USB Boot-Recovery driver for Mobile devices", which the system can not find specific file.  What am I am doing wrong?  Would love to get ICS or JB on this thing,  
Thanks in advance. 

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,  
Based from what i read in your post, seems like your the USB driver is not installed  properly
Please download the drivers from   here -  K1_JB_AOSP.zip  
Please refer below threads for complete installation details
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/ROM-JB-AOSP-Lenovo-Ideapad-K1/td-p/835729
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/ROM-ICS-Ideapad-K1-Official-Release/td-p/8...
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Ideapad-K1-Which-Rom-do-I-choose/td-p/8265...
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Rooting-US-K1-this-method-wipes-tablet-cle...
http://forum.xda-developers.com/showthread.php?t=1564002
Do give this a try and let us know  
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • Error (102) while updating the software. Solution please?

    I'm encountering an error (102) while updating my software to 10.8.4. I need a solution?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • TS1424 Updating Itunes software:  error code 2349

    When updating my itunes software to accomodate my new Iphone 5S, I got an error message 2349.  What does this mean?

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • IMac Driver or Software Error? Please Help.

    Tried searching the forum by tags and found no similar inquiries. Will try to describe the best I can.
    Since last night, I've been noticing some odd quirks and occasional flickering on my late 2009 iMac (Snow Leopard 10.6.8, 2.66Ghz i5 quad core, 4GB RAM, Radeon HD 4850 512mb RAM with the firmware update). The overall display is fine, but here are some quirky symptoms I've noticed:
    -Apple volume display will flicker away now instead of fade, though that's intermittent
    -Flash videos on Chrome will flicker, but not all of them (I've enabled and disabled hardware acceleration without improvement). In fact, most ads and text boxes flash and flicker as well.
    -Quicktime videos won't display properly, but on reboot they do temporarily. Using the space bar to preview them plays normally.
    -Odd garbled text/disappearances of items. For example, when I try to open System Preferences, all of the text is unreadable. When I minimize it and pop it back up, it displays fine. Same goes for Applications window and similar items. Screen grab below:
    http://tinypic.com/r/wks7jr/8
    -At one point, my upper menu bar changed to translucent on its own. I reverted it back to white and it's remained that way since.
    I'm able to run most typical programs (Microsoft Office, etc.) without issue. I've read scattered bits about logic boards (though I've had no startup problems), so not sure if it's that or maybe video card is failing (though the entire screen would be glitching/corrupted or horizontal lined, right?) or just a general OS corruption and it's all software related. What I've seen doesn't seem to be related to PRAM either.
    If this means I go computer shopping, that's fine. I was just hopping to figure out what the issue may be to get my head around what's wrong. Thank you!

    Tried searching the forum by tags and found no similar inquiries. Will try to describe the best I can.
    Since last night, I've been noticing some odd quirks and occasional flickering on my late 2009 iMac (Snow Leopard 10.6.8, 2.66Ghz i5 quad core, 4GB RAM, Radeon HD 4850 512mb RAM with the firmware update). The overall display is fine, but here are some quirky symptoms I've noticed:
    -Apple volume display will flicker away now instead of fade, though that's intermittent
    -Flash videos on Chrome will flicker, but not all of them (I've enabled and disabled hardware acceleration without improvement). In fact, most ads and text boxes flash and flicker as well.
    -Quicktime videos won't display properly, but on reboot they do temporarily. Using the space bar to preview them plays normally.
    -Odd garbled text/disappearances of items. For example, when I try to open System Preferences, all of the text is unreadable. When I minimize it and pop it back up, it displays fine. Same goes for Applications window and similar items. Screen grab below:
    http://tinypic.com/r/wks7jr/8
    -At one point, my upper menu bar changed to translucent on its own. I reverted it back to white and it's remained that way since.
    I'm able to run most typical programs (Microsoft Office, etc.) without issue. I've read scattered bits about logic boards (though I've had no startup problems), so not sure if it's that or maybe video card is failing (though the entire screen would be glitching/corrupted or horizontal lined, right?) or just a general OS corruption and it's all software related. What I've seen doesn't seem to be related to PRAM either.
    If this means I go computer shopping, that's fine. I was just hopping to figure out what the issue may be to get my head around what's wrong. Thank you!

  • Cant update to software error tried the things people said *Windows*

    im stuck at recovery mode tried tiny umbrella an delete gs.apple didnt work!

    take your phone to the closest apple store and get a replacement

  • Basic publishing error - assist please

    Forgot the correct way to publish as Scorm.  Please advise?  When I publish, I get a white empty txt file only?  It should result in a Zip file - but it doesn't.  I have set it as a flash file -with ZIp box checked, and in Flash 9.   DId this a long while back - can't remember what I am doing wrong.  

    Hello,
    Which version of Captivate?
    Did you enable reporting? It can be done from the Preferences, under Quiz. You only need a SCORM object when you have reporting enabled. Try to configure the Reporting options and Manifest. The SCORM object will be created automatically, it is a zipped folder with more than just the 3 default files (SWF, HTML, JS), because it needs a lot of extra files for SCORM. If you do not need reporting, you can create a zipped file (is in the Publishing options) and upload that as a package, instructing to start with the HTML-file.
    Lilybiri

  • Software update on ipod error msg 1602

    i tried to do a software update for my ipod 4th gen half way through came up with itunes cannot update your software error message 1602, now ipod is stuck in recovery mode and when i connect it to laptop, i tunes or laptop wont recognise the iPod , it makes a sound as if it is connecting but nothing happens, laptop also shows Apple mobile device usb driver is working and installed correctly,, I have tried all of the solutions Apple have suggested , nothing has worked,.. HELP Please :)

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Also fi necessary if you get error mssage:
    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

  • Device Driver Software Not Installed Properly

    Hi
    I have Reinstalled Windows 7 ultimate 64 bit, after installing all hp drivers I lost WIFI
    and when checked Device Manager I found Under >Display Drivers >(1)standard VGA Graphics Adapter (ERROR)- when I right click mouse and check under general the message " This device cannot start (code 10)
    (2) standard VGA Graphics Adapter - working Properly
    and 
    >under other devices
    -Bluetooth Pehripheral Device (Error)
    -Network Controller (Error)
    both showing error
    Does these errors actually causing WIFI to not work? Please Guide me how to fix these errors
    When I go to HP Connection Manager 
    Under WIFI - Disabled by Mobility Centre is showing 
    I can not able to fix it.
    When I goto Windows Moblility centre It is showing not showing Wirless Connection Switchable Button
    I Tried for Updating Driver software scan for Hardware changes its not working its saying driver is upto date
    Kindly Resolve My WiFi Issue
    Thanks in Advance

    Hi 
    Originally My OS was windows home  Genuine but I recently changed to win7 64 bit Ultimate lost Recovery Manager (Formatted by mistake, did not got any copy from the seller while I was in UAE (Dubai);
    I Have installed all the drivers downloadaed from 
    http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/508...
    but  WIFI not working as I mentioned earlier mail....
    My Bluetooth {heripheral device id is
    BTHENUM\{00001132-0000-1000-8000-00805f9b34fb}_VID&00010046_PID&0802
    BTHENUM\{00001132-0000-1000-8000-00805f9b34fb}_LOCALMFG&000f
    and 
    Network Controller id is
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
    PCI\VEN_14E4&DEV_4727&CC_028000
    PCI\VEN_14E4&DEV_4727&CC_0280
    FYI

  • Xperia Z3: sony update engine faliure (error 1200)

    Hi Sony,
    I recently baught Xperia Z3, and am trying to update it...getting the error "Sony Update Emgine faliure (error 1200)
    please assist. I attaching the error image also.

    I found a solution for this issue:
    follow these steps:
    1, disable firewall and antivirus also.
    2, ON internet data in mobile phone 3G or 4G and start USB tethering, settings--more--tethering and portable hotspot--USB tethering.
    3, connect your laptop using tethering. dont use the internet connection which was showing error 1200.
    4, if PCC already updated no issues..otherwise uninstall and reinstall again.
    5, connect xperia phone with tethering ON.
    6, Check drivers are installing. 2 No.s drivers will be installed including RNDIS drivers.
    7, Start updating or repairing software.
    8, usually error wil popout at preparing step in PCC. now, that step should complete.
    9, Let software download to your PC begin with phone tethering. after downloading 30% or more, if data is a concern..disconnect tethering and connect normal internet. Downloading should continue..
    10, once downloading continues, update or repair your xperia. should be successful.
    i did this yesterday 13/5/15 for my Z3 as i was experiencing this error 1200 more than a year. i updated 23.1.A.1.28 firmware by this method.
    no issue at all till the process completed.. easy steps though.I'm using USB dongle for internet.. that could cause this issue.. once i tethered my phone, no issue  ..try this and if succeded, please forward to others.

  • HP MediaSmart DVD - Need to Update Bluray Software - Advice??

    Hi Guys,
    So has there been any update to this issue after all these months? I recently bought an HP Pavillion Slimline 5500t and when I first got the system about a month ago the Blu Ray player worked although not very well. It skipped and stuttered and had some pixelization issues with a few Bluray Discs. Seems to play non-Bluray fine. Then I got Avatar this past Friday and put the disc in the computer - played fine for about 40 mins - maybe an occasional stutter but nothing I couldn't tolerate. I made no system changes at all and last night (sunday night, two days later) when I insert the same exact bluray disc (Avatar) I get a red screen that says "Your Bluray Software needs to be updated, please contact your manufacturer." 
    I call tech support and after 3hrs of doing updates and other stuff I am in the exact same situation as I was before. Only now they tell me they want to do a system recovery back to the day I got the PC which will wipe out all my data and configuration settings. I told them no way. Everything is working perfectly EXCEPT the HP Media Smart DVD software. So why would I blow out my entire system and all the programs I've downloaded.
    So I'm now stuck. I like others have said do not want to pay $89.95 for Cyberlink's PowerDVD after I already paid $1200 for this computer with all the upgraded goodies to be able to play BluRay. Very disappointed in HP for not fixing this issue properly. Any advice?
    Thanks, Dan
    HP Pavillion Slimeline - S5580t - Windows 7

    Also reposting another post I left on another thread with more info of my situation:
    "But for real. I was trying to explain this issue to my girlfriend last night and she was like, "but my crappy old DVD player has never had an issue playing any DVD I put in it, so why would your $1200 computer have a problem?"
    And there we are. I totally agree with her. It is complete BS. Not to mention I took the other poster's advice and downloaded Slysoft and whala...perfect picture quality, no encryption or "need to update your software" errors at all.
    So this is 100% a licensing / copyright update issue and HP / Cyberlink are just behind the curve. What I can't understand is how can Netflix and others be sending out discs that don't work in people's stand alone Bluray players?? And if they do in fact work in the stand alone players then why in the hell would they NOT work in a high speed / media center spec built always online always connected computer which could download new codecs/updates every single day if it required to do so??
    I don't get it. I'm gonna complain to HP today because this is 100% a licensing issue. And to think they almost had me roll back my whole **bleep** computer and delete all my files and settings. All I had to do was a 10sec download and everything works perfectly. But I don't want to pay for Slysoft...its F-ing expensive. I'm pissed."
    HP Pavillion Slimeline - S5580t - Windows 7

  • An alternative to the buggy e2200 Killer Ethernet Driver/Software (GE60)

    After several crashes related to the bad Bigfoot Killer Ethernet software and driver, I decided to dig a little deeper.
    Most people will be able to tell you that the "Killer Ethernet" is fairy pointless, I didn't buy the laptop for it at any rate.
    It's worse than pointless when it causes system instability and crashes.
    After a little research I determined that the "Qualcomm Atheros llama Ke2200 Series PCI-E Ethernet Controller" is actually a "Qualcomm Atheros AR813X/AR815X/816X Series PCI-E Ethernet Controller"
    Specifically it's a slightly modified AR8161 Gigabit Ethernet [1969:1091].
    As such you can download newer, unmodified drivers from Atheros directly, just google for: atheros+download and visit the first link.
    On the Atheros site under "AR816X Family Drivers" choose the "WIN_AR816X" option from the dropdown box.
    However, the vendor and device ID won't match, so you'll need to do the following to install it.
    Keep in mind that these are raw drivers, they're work perfectly, but include none of the fancy (useless) "Killer" software features.
    Lets get started!
    Download the file above and extract it to a temporary location.
    First, (because removing the killer Ethernet software is part of the goal here) you should go to control panel and uninstall the existing bigfoot killer Ethernet package from "Programs and Features".
    1) Head to control panel and open "Device Manager".
    2) Under "Network Adapters" right click on the e2200 Killer network card and choose "Update Driver Software".
    3) Click "Browse my computer for driver software".
    4) Click "Let me pick from a list of device drivers on my computer.
    5) Click "Have Disk".
    6) Click "Browse"
    7) Find the folder you extracted and navigate to "AR813x_AR815x_AR816x_v2.1.0.15_WHQL\Common_Dri\Win8_64"
    8) Select "L1C63x64.inf" and click Open, then OK.
    9) From the list of drivers choose "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
    10) Choose "Yes".
    11) Now choose "Close".
    In Control Panel your network card will now be called "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
    You're now running the latest Atheros driver for your rebranded Atheros AR8161 Ethernet Card.

    Quote from: mish on 10-April-13, 17:48:06
    After several crashes related to the bad Bigfoot Killer Ethernet software and driver, I decided to dig a little deeper.
    Most people will be able to tell you that the "Killer Ethernet" is fairy pointless, I didn't buy the laptop for it at any rate.
    It's worse than pointless when it causes system instability and crashes.
    After a little research I determined that the "Qualcomm Atheros llama Ke2200 Series PCI-E Ethernet Controller" is actually a "Qualcomm Atheros AR813X/AR815X/816X Series PCI-E Ethernet Controller"
    Specifically it's a slightly modified AR8161 Gigabit Ethernet [1969:1091].
    As such you can download newer, unmodified drivers from Atheros directly, just google for: atheros+download and visit the first link.
    On the Atheros site under "AR816X Family Drivers" choose the "WIN_AR816X" option from the dropdown box.
    However, the vendor and device ID won't match, so you'll need to do the following to install it.
    Keep in mind that these are raw drivers, they're work perfectly, but include none of the fancy (useless) "Killer" software features.
    Lets get started!
    Download the file above and extract it to a temporary location.
    First, (because removing the killer Ethernet software is part of the goal here) you should go to control panel and uninstall the existing bigfoot killer Ethernet package from "Programs and Features".
    1) Head to control panel and open "Device Manager".
    2) Under "Network Adapters" right click on the e2200 Killer network card and choose "Update Driver Software".
    3) Click "Browse my computer for driver software".
    4) Click "Let me pick from a list of device drivers on my computer.
    5) Click "Have Disk".
    6) Click "Browse"
    7) Find the folder you extracted and navigate to "AR813x_AR815x_AR816x_v2.1.0.15_WHQL\Common_Dri\Win8_64"
    8) Select "L1C63x64.inf" and click Open, then OK.
    9) From the list of drivers choose "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
    10) Choose "Yes".
    11) Now choose "Close".
    In Control Panel your network card will now be called "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
    You're now running the latest Atheros driver for your rebranded Atheros AR8161 Ethernet Card.
    There isnt anything to download here.

  • SONY UPDATE ENGINE FAILURE (ERROR 2003)

    PLEASE HELP ME...URGENT..WHEN I WANT TO UPDATE MY XPERIA GO THEY TELL ME THIS MSSG"SONY UPDATE ENGINE FAILURE (ERROR 2003)"PLEASE HELP ME.

    http://www.sonymobile.com/gb/tools/update-service/http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exeAlternatives on How to backup Xperiashttp://talk.sonymobile.com/thread/36355Don't forget to mark the Correct Answers & Helpful Answers

  • LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred on ASR9001

    Dear all,
    i got the problem, suddently my customer router generating that log :
    LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred,
    is it the line card is error, and need to be rma ?
    or is there any wrong configuration, or need to be upgraded with FPD.
    the IOS XR version is 4.2.3
    Thanks,
    Budi L

    Hi Alexei,
    here's the log and show hw-module fpd.
    LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred, please contact technical support  
    RP/0/RSP0/CPU0:Dec 19 00:48:55 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: FAILED
    LC/0/0/CPU0:Dec 19 00:48:56 : vic_0[363]: %L2-ETHERNET-6-MTU_NEAR_HW_LIMIT : The configured MTU of 9216 on GigabitEthernet0_0_0_14 is close to the H/W limit, and hence large 802.1Q or QinQ frames may be dropped as oversized frames
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/19, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/19, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/18, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/18, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/17, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/17, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/14, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/14, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/13, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/13, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/12, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/12, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/11, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/11, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/10, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/10, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/9, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/9, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/8, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/8, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/7, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/7, changed state to Down
    LC/0/0/CPU0:Dec 19 00:48:58 : rsi_agent[318]: %OS-RSI_AGENT-6-CARD_ROLE_CHANGE : Based on the card configuration/type, the AFI IPv4 role of the card has changed from Standard to Customer Facing
    LC/0/0/CPU0:Dec 19 00:48:58 : rsi_agent[318]: %OS-RSI_AGENT-6-CARD_ROLE_CHANGE : Based on the card configuration/type, the AFI IPv6 role of the card has changed from Standard to Not Interested
    RP/0/RSP0/CPU0:Dec 19 00:48:58 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: UNPOWERED
    RP/0/RSP0/CPU0:Dec 19 00:49:02 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: DISABLED
    RP/0/RSP0/CPU0:CG-PE-05(admin)#show hw-module fpd location all
    Wed Dec 19 05:25:10.591 WIB
    ===================================== ==========================================
                                          Existing Field Programmable Devices
                                          ==========================================
                                            HW                       Current SW Upg/
    Location     Card Type                Version Type Subtype Inst   Version   Dng?
    ============ ======================== ======= ==== ======= ==== =========== ====
    0/RSP0/CPU0  ASR9001-RP                 1.0   lc   fpga2   0       1.12     No
                                                  lc   cbc     0      22.114    No
                                                  lc   rommon  0       1.29     No
    0/RSP0/CPU0  ASR-9001-FAN               1.0   lc   cbc     2      24.114    No
    0/0/CPU0     ASR9001-LC                 1.0   lc   cbc     0      23.114    No
                                                  lc   fpga2   0       1.15     No
                                                  lc   fpga4   0       2.06     No
                                                  lc   rommon  0       1.30     No
    0/0/0        A9K-MPA-20X1GE             1.0   spa  fpga3   0       0.08     No
    Thanks,
    Budi L

  • HT4461 Feb 2014 still getting Error 102 - Please Help!

    It's February 2014 and I STILL can't download my mac updates due to Error 102 - please assist! (I'm not a tech savvoy so layman's terms appreciated!)  I have a Mac Mini and my current OS is OS X 10.8.4

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

    hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

    Hi
    Try to delete all content (format by clean install), then you can install Mavericks, however I think its better to add mavericks into External fladh drive (USB)
    to do clean install"
    the language in the screenshot is Swedish which is same in English "Radera= delete), make sure you do back up first for you photos, music, documents,,,,,etc.

Maybe you are looking for

  • Call of Duty error

    I just download the sample copy of Call of Duty... It ran very well with 1 gig of ram and highest video setting. Only problem when halfway through game I got the following error FS_Handleforfile:none free! what in the world is that error? Fan kicked

  • Imbalance GR/SES value in PO History

    We have the following scenario for PO: 1. PO service item value = $10 (acc cat = P, item cat = D) 2. Create SES value = $10 3. Create invoice value = $1 4. Create credit memo = $1 5. Revoke SES (step 2) value = $10 6. Delete SES (step 2) value = $10

  • Exceptions not coming to reportError method

    Hi, I have implemented Custom phase listner,life cycle and errorhandler in my 11g application.But whenever an exception is thrown ,it is coming to reportException of errorhandler and from there directly it is coming to jsp page skipping the reportErr

  • XI Content Server directory

    hi,    I am doing a EDI scenario using Itemfields Conversion agent(Content master).It is a FILE-XI-R/3 scenario. I have done the necessary configurations in the Conversion agent. I need to deploy this in the "XI Content Server directory" Can anyone t

  • Embed movie controls

    I have a Flash site that imports HTML copy from external text files. On one of the pages, I would like to list some clickable links to show some video clips. How do I get the swf to know that a certain link should start playing a movie clip, and disp