Ideapad S206: Blue screen crashes and weird noise

Hi guys,
Since Xmas I have had an Ideapad S206. I'm having problems with it and am not sure what is causing them. 
The machine frequently crashes - I've seen the Blue Screen of Death at least once a week, sometimes several times a day. I'm never doing much with the machine - just online, and with a few programs open (word processing mainly) and iTunes.
Sometimes, it crashes without me doing anything at all - I leave the room, come back 5 minutes later and tells me there has been a blue screen crash.
Several times, when the blue screen comes up, it makes a terrible noise like a pneumatic drill/piledriver. I've never heard a laptop make a noise like it.
Can anyone advise what the problem is? Should I contact Lenovo and try and send the machine back for a refund? (It's over its 30 day warranty.)
Thanks in advance.

can you share the error code here?
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

  • Tecra A2 - Blue screen crashes and restarts

    I have a Toshiba Tecra A2 Laptop. Every now and then it will show a blue screen and crash. It mentions something about a "memory error" or "physical dump" something along those lines. I have used the recovery tool and formatted everything, and not installed anything new, I still get these random crashes. What could be the problem? No new drivers have been installed either, just the normal recovery software. Please help! Thanks

    Hi
    As far as I know sometimes the blue screen appears because of serious software error or a hardware malfunction. In your case it could be a memory modules fault. In my opinion you should check your memory modules and if its necessary you should replaced it.

  • Blue screen crash and reboot!

    The first day I got my iPhone 4 my iPhone flashed a blue screen then rebooted twice in the same day, I then did a complete restore...
    Today, 6 days latter my iPhone 4 again just showed a blue screen then rebooted...
    Has this happened to anyone else? Is the blue screen just the 'new way' to crash?
    Is my iPhone faulty?

    I have the same message on black screen topic as it varies....
    I once got this, the first day i used my iphone 4. But it restarted and have not had the issue till today.
    Now i get the blue/black screen of death on my iphone4 frequently, under a period of 4 hours I've got it approximately 10 times. No I'm not exaggerating 10 times give or take a few.
    I'm restoring it, got it three times in the middle of restoring. I've had one successful restore today, i hope the one i'm dong at the moment of writing this will be successful.
    I will try to restore it as a new one. But I'm afraid it's the A4 built in memory that is the root cause.
    As when it restarts or starts i quite often get a distorted apple logo. Not always but very often. This leads me to believe that its a memory issue and hardware. It runs 4.0.2.
    Any experience of similar problems out there. Tomorrow i take it to a Apple concept store but i want input.
    Message was edited by: JuanSkom

  • Blue screen crash and computer reboots

    We have a PowerMac G4 Mirror Door with dual 1.42 processors running Leopard OSX that has started to suddenly go to a blue screen, log out, and then restart to the desktop. It might do this 3 times in a row, and then will work for a while, and then restart again.
    We have tried resetting the PRAM to get this back to original settings, but the computer continues to randomly log out and restart.
    Any ideas on how to fix this problem would be greatly appreciated!

    Boot off your Apple Hardware Test Disc , then run the extended Apple Hardware Test. Your model would have a separate AHT CD.
    Here's the list and downloads for AHT for some G4 models if you don't find yours, some G4s only have it on the Original Install Disc...
    http://www.info.apple.com/support/aht.html
    Might try Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range with everything running, that's likely it.

  • Repeated blue screen crash when running labview 8.2 on Dell optiplex GX620

    Hi, I have recently experienced a series of 'blue screen' crashes on a Dell Optiplex GX620 while running Labview 8.2. The dell is running Windows XP SP2 with an ATI Radeon X600 graphics card. Labview is interfacing with a NI DAQPad 6015 device. The computer is a dedicated Labview machine so there is no other third party software that has been installed that could be causing the problem. Also, the computer is one of three identical machines, the only one that has labview installed and the only one that is crashing. Upon rebooting after the first 'blue screen' crash an error report indicated that there was a problem with the ATI graphics driver and suggested updating the driver to the latest version. This was done. Upon rebooting after the second 'blue screen' crash an error report indicated that there was a problem with the RAM. Both of these crashes occurred while running a labview application. A further two incidents have occurred where the computer has restarted for no apparent reason while running a labview application. I was wondering if you were aware of any known issues/incompatibilities with my specific machine and labview 8.2, or if there could be any other known issues with labview that might be causing the crashes. It should also be noted that this is a new setup and these crashes have occurred in relatively short time frame. Thanks for your help!

    Hi,
    To have a better understanding of what is causing the blue screen crash and the Windows restart, we may need to retrieve the memory dump caused by the crash in Windows XP.  Before we actually get into that, we may need to disable Automatic Reboot by Windows when it crashes.  I have attached a link that describes how to disable computer reboot after a crash and I have also attached a link of how to retreive the memory dump.  Let me know how it goes!
    Why Does My Computer Automatically Reboot For No Reason?
    How Can I Create a Kernel Memory Dump When Windows Crashes?
    (Note that we want to select Complete memory dump, not Kernel Memory dump)
    Regards,
    Nadim
    Applications Engineering
    National Instruments

  • Blue screen crash when hooking up iPhone

    I have had my iPhone for a few months now and have only been able to hook up my phone to my husband's (far inferior) laptop. Whenever I hook my phone up to my Sony Vaio desktop I get a blue screen crash and the whole system starts rebooting. Does anyone else have this problem and what can I do about it? I called Apple support and after reinstalling iTunes they said they didn't know. They said it might be a driver issue but I don't really want to start removing random drivers as I don't want to lose functionality of my computer and I don't know which driver might be causing this...
    PLEASE HELP ME!!

    Which USB port are you connecting to on the Vaio, what else is connected to USB, and have you checked Sony's site for updated USB root drivers?

  • Blue screen, crashes, freezes after ios 7.1 iphone 5s

    I've been using iphone 5s 64gb A1530 starting December 2013 without any problems. But after updating to 7.1 I faced blue screen crashes and freezes.
    Few sort of problems:
    1. blue screen appears then goes to gray and iphone falls asleep.
    2. blue screen appears then restarts then blue screen then restarts and loops until I will be successful with soft reset.
    I've been googling a lot for this problem and the solutions I tried didn't help:
    1. I switched of iCloud data copy.
    2. I restored from backup iCloud.
    3. I restored from backup iTunes.
    4. I restored as factory (unfortunately it still comes with 7.1)
    Nothing did help. Could you please give me advise how I can downgrade back to 7.0.6 or 7.0.5? Such resets are really annoying (over 20 times per day)
    In diagnosis part from Preferences I have a lot of kernel reports. If there is any way to heal my iphone or it's time to trash it?

    Finally Apple replaced the device with the new one. Service guy in Apple store tried to recover it from DFU mode but failed.
    I got no idea what ios7.1 brought to my iphone that after 4 months of normal usage it became a blue screen piece of metal. And maybe another app or virus crashed the hardware.

  • Blue screen crashes with specifc error starting to show up on restart

    I keep getting blue screen crashes and as I start up the system I get this error constantly. 
    c:\users\computeruser\appdata\roaming\newnext.me\nengine.dll error can you please send me a fix for this issue. 

    In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc. 
    If
    you don't know where .DMP files are located, here's how to get to them:
    1. Navigate
    to the %systemroot%\Minidump folder.
    2. Copy any and all
    DMP files in the Minidump folder to your Desktop and then zip up these files.
    3. Upload
    the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
    4 (optional): The type
    of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference between Small Memory Dumps and Kernel-Dumps
    in the simplest definition is a Kernel-Dump contains much more
    information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best choice. Do note that Kernel-Dumps
    are much larger in
    size due to containing much more info, which is why I mentioned upload speed, etc.
    If
    you are going to use Onedrive but don't know how to upload to it, please visit the following:
    Upload
    photos and files to Onedrive.
    Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default
    will delete .DMP files upon use.
    If
    your computer is not generating .DMP files, please do the following:
    1. Start > type %systemroot%
    which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
    2. Windows key + Pause
    key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.
    3. Windows key + Pause
    key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'. 
    Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
    4. Double check that
    the WERS is ENABLED:
    Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is
    not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click
    Apply. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • I HAVE A SONY VAIO WITH WINDOWS VISTA- SUDDENLY I'M GETTING A BLUE SCREEN (crash dump)THAT SHUTS DOWN MY COMPUTER. HOW DO I STOP THIS. ALREADY TRIED TO UNINSTALL AND RE INSTALL. MAY NOT HAVE DONE IT CORRECTLY ?

    LAST WEEK STARTED GETTING A BLUE SCREEN (CRASH DUMP) AFTER CLOSING I TUNES, THAT CAUSES MY COMPUTER TO SHUTDOWN. IVE BEEN TOLD BY A PC REPAIR SHOP THAT I DONT HAVE A VIRUS. I DO HAVE ANTIVIRUS PROTECTION ON MY PC. ATTEMPED TO REINSTALL I TUNES BUT MAY NOT HAVE DONE IT CORRECTLY. I STILL HAVE THE PROBLEM. THE BLUE SCREEN ONLY HAPPENS WITH I TUNES. I HAVENT MADE ANY RECENT CHANGES TO MY MUSIC- NO DOWNLOADS /UPLOADS. ANY KNOWLEDGE OF THIS SITUATION? THANKS!!

    Hey Ishland,
    You are not alone. I'm getting the same thing I'm running Vista. I'm reading that Windows 8, 8.1 preview, Vista and XP.
    I'm thinking this has to be a Apple update to iTunes 11.0.4.4 fix.
    Cheers,
    Steve
    P.S. you might want to make your post easier to read by turning the cap lock off.

  • Every time I have tried to install firefox 6.0, it has blue screen crashed my system - can you help?

    I am using an old computer but it has dual processors and 4 gb of ram. I am using Windows XP home edition, sp2 atm. I have a Galaxy 200 vid card, sound-blaster X-Fi, Gigabyte mother board. Atm, all I have is IE 6.
    After the blue screen crash, I had trouble rebooting my computer. When I was able to reboot, the firefox 6.0 would not run and I could not uninstall it. I did a restore system and was finally able to uninstall it - at the time I still had the 5.0 installer on my desktop so I installed it- I don't have it now.
    I tried the firefox 6.0 before I had gotten all the updates for sp3- as I have had trouble getting the last windows updates to install.
    I am not a techie - what I have done is trial and error to try to get my software to work. I would either like to get a working version of firefox 6.0 or a safe download of firefox 4.0 as that worked and I had no problems with it.
    Can you assist?

    Can you attach a screenshot or link to the instructions you are following?
    You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

  • 3 Dead Pixels after Blue Screen crash, should I make another Genius Bar appointment?

    Ok, so yesterday I made a GB appointment, after a friend told me to, when I showed him that I had a dead pixel on my phone's screen. So when I got to apple, I showed them the dead pixel and they told me they were going to replace the screen on the phone. It turned out that the machine they use to do so, was down, so they ended up giving me a replacement phone. So I checked it out at the store and it looked fine. So now today, while running some errands, my new replacement iPhone had crashed and turned blue, then rebooted on me & a few moments after when I got back on the phone and was imessaging, I noticed 3 dead pixels instantly (one on right under the names of the contact on the message, on the J key on the board and to the middle-right where your send messages are displayed)
    Now I'm thinking that, because my originally iPhone had crashed and turned blue also and I noticed the one dead pixel on it that same day, that the blue screen crashing could possibly be causing this??
    Should I go back to the apple store and tell them what happened?

    (Update) the pixels actually all seem to be red, whenever I go on a yellow screen and I just noticed a fourth one.    I think I should take my phone in

  • Access to istore causes blue screen crash

    I am running an ipod and itouch - PC is Windows XP.
    With the newest version of itunes, everything works fine between itunes on the PC and the devices, EXCEPT trying to access the store for music or podcasts. I see the headings of the store displayed, then I get a blue screen crash. This happens with the devices attached, or not.

    The first thing to do is get the error codes from the crash.
    Here is an older post from b noir that explains how to find the error codes.
    http://discussions.info.apple.com/message.jspa?messageID=1422425

  • Clicking on firefox icon causes blue screen crash

    This began Friday, Feb. 25, about mid day. The only changes to the system that morning were an update to an Adobe plugin, either Flash player or Shockwave, I'm not sure, and an update to the Scottrade Elite desktop trading app. Both of those changes occurred about 0900. The problems began about 1130 when the system, Windows 7 Home Premium had a blue screen crash. From that time on, I have uninstalled each of the apps mentioned. I cannot open Firefox to work on the plugins becuase every time I click on the icon I get a blue screen crash with the words "Page fault in non paged area" at the top. I've also uninstalled and reinstalled the Firefox app with no apparent beneficial effect. The Scottrade trading app has been reinstalled and works well, causing no further probs.

    Hello mrcart,
    i think it is unlikely that firefox itself is causing an operating system crash, i had some time back an similar issue where a system of a friend of mine was crashing while using IE - thats the only app he used ... the system in his case had faulty ram, and i suspect you are facing some sort of hardware problem or faulty device driver.
    Please read this (also lists steps what you can do):
    http://technet.microsoft.com/en-us/library/cc957625.aspx
    (personally) I would suggest you start by checking your ram, you can do this in two ways:
    Search in your Windows 7 Start Menu for "ram", you should find something like "Diagnose your computer´s memory problems"
    ... Or, you use the memtest86+ tool from here (e.g. download the iso, burn it and boot from the cd):
    http://www.memtest.org/
    Check your eventlog for errors (e.g. disk errors, timeouts, etc).
    If you cannot track the problem down (i would suspect a hardware problem or faulty device driver ... e.g. it could be your video card driver doing something wrong) you should seek help at your computer manufacturer, an experienced friend, or using some forum.
    kind regards,
    John Kirk.

  • Pavilion elite e9110t windows 7 blue screen crash

    hp pavilion elite e9110t  upgraded to win 7  i recieved 2 blue screen crashes today on goggle chrome with the following error codes  
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information about the problem:
    BCCode: d1
    BCP1: 00000000000000B0
    BCP2: 0000000000000002
    BCP3: 0000000000000000
    BCP4: FFFFF88001770E9D
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1
    what do i need to do?????   i am using chrome to type this. 
    This question was solved.
    View Solution.

    Joey, welcome to the forum.
    Did you try uninstalling and reinstalling Chrome?  Sometimes a glitch will occur during the original install.  This can cause the problem that you are experiencing.
    Also, you may want to try Internet Explorer or Firefox to see if you receive the same error message.  This will tell you if it is a problem with Chrome or a system problem.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Windows 7 Blue Screen Crash

    Hello, I recently have been getting a lot of blue screen crashes simultaneously. I haven't downloaded any games or anything. I just use this laptop for school work mostly. I already ran a memory diagnostic test and no problems found as well as restored my
    computer to a month back to when it wasn't having any problems. Anyways, this the problem details:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    4105
    Additional information about the problem:
      BCCode:    3b
      BCP1:    00000000C0000005
      BCP2:    FFFFF88005CFC3BE
      BCP3:    FFFFF88009ACE4D0
      BCP4:    0000000000000000
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
    Files that help describe the problem:
      C:\WINDOWS\Minidump\103014-25318-01.dmp
      C:\Users\Mark\AppData\Local\Temp\WER-82087-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt
    Hope that someone could help! Thanks!

    FS
    These were all Related to NETwNs64.sys Wireless WiFi Link Driver from Intel Corporation  (yours is 5 years old).  I would remove the current driver and install the newest driver available.
    If you continue to crash Remove McAfee and use MSE in its place.
    Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Users\Ken\Desktop\problem\103014-25318-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
    Machine Name:
    Kernel base = 0xfffff800`0360c000 PsLoadedModuleList = 0xfffff800`0384f890
    Debug session time: Thu Oct 30 12:54:00.869 2014 (UTC - 4:00)
    System Uptime: 0 days 0:01:07.181
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 3B, {c0000005, fffff88005cfc3be, fffff88009ace4d0, 0}
    *** WARNING: Unable to verify timestamp for NETwNs64.sys
    *** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
    Probably caused by : NETwNs64.sys ( NETwNs64+2673be )
    Followup: MachineOwner
    2: kd> !analyze -v
    * Bugcheck Analysis *
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000005, Exception code that caused the bugcheck
    Arg2: fffff88005cfc3be, Address of the instruction which caused the bugcheck
    Arg3: fffff88009ace4d0, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    NETwNs64+2673be
    fffff880`05cfc3be 8b10 mov edx,dword ptr [rax]
    CONTEXT: fffff88009ace4d0 -- (.cxr 0xfffff88009ace4d0;r)
    rax=1004f250001ddd20 rbx=0000000000000000 rcx=0000000000060049
    rdx=000000000000002f rsi=fffffa800858f6b8 rdi=000000000000006b
    rip=fffff88005cfc3be rsp=fffff88009aceeb0 rbp=fffffa8008bf7618
    r8=0000000000000a70 r9=0000000000000000 r10=fffff8000360c000
    r11=fffff88009acecc0 r12=fffffa800a91d000 r13=0000000000000000
    r14=fffffa8008bf7fb0 r15=fffffa800af1c008
    iopl=0 nv up ei ng nz na pe nc
    cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
    NETwNs64+0x2673be:
    fffff880`05cfc3be 8b10 mov edx,dword ptr [rax] ds:002b:1004f250`001ddd20=????????
    Last set context:
    rax=1004f250001ddd20 rbx=0000000000000000 rcx=0000000000060049
    rdx=000000000000002f rsi=fffffa800858f6b8 rdi=000000000000006b
    rip=fffff88005cfc3be rsp=fffff88009aceeb0 rbp=fffffa8008bf7618
    r8=0000000000000a70 r9=0000000000000000 r10=fffff8000360c000
    r11=fffff88009acecc0 r12=fffffa800a91d000 r13=0000000000000000
    r14=fffffa8008bf7fb0 r15=fffffa800af1c008
    iopl=0 nv up ei ng nz na pe nc
    cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
    NETwNs64+0x2673be:
    fffff880`05cfc3be 8b10 mov edx,dword ptr [rax] ds:002b:1004f250`001ddd20=????????
    Resetting default scope
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0x3B
    PROCESS_NAME: wlanext.exe
    CURRENT_IRQL: 2
    ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
    LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff88005cfc3be
    STACK_TEXT:
    fffff880`09aceeb0 00000000`00000000 : fffffa80`08bf7618 fffffa80`00000002 00000000`000000dc fffffa80`00001e37 : NETwNs64+0x2673be
    FOLLOWUP_IP:
    NETwNs64+2673be
    fffff880`05cfc3be 8b10 mov edx,dword ptr [rax]
    SYMBOL_STACK_INDEX: 0
    SYMBOL_NAME: NETwNs64+2673be
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: NETwNs64
    IMAGE_NAME: NETwNs64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 4d10df1b
    STACK_COMMAND: .cxr 0xfffff88009ace4d0 ; kb
    FAILURE_BUCKET_ID: X64_0x3B_NETwNs64+2673be
    BUCKET_ID: X64_0x3B_NETwNs64+2673be
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:x64_0x3b_netwns64+2673be
    FAILURE_ID_HASH: {69744f93-8380-f8c7-a080-fedb60128a80}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for