Ideapad s400 windows 8 backup failed

I am trying to make a windows backup image incase of hard drive failure. I have already found out that onekey backup is usless for this. I am getting the error Backup Failed there was a failure while compacting the virtual hard disk on the backup location 0x80780151. Are there some drives I can leave out of the backup? These are the checked drives
EFI System partition
Windows 8_OS(C
WINNRE_DRV System

Did you see this link?
https://social.technet.microsoft.com/Forums/windows/en-US/4d016f5d-af86-45a5-8968-71ad331b3d64/syste...
Read the entire link, as the RPM referred to in the link, was an error. It should have been TPM. Turn off TPM, and make sure the backup drive is formatted correctly.
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Similar Messages

Windows 7: Windows Backup failed 0x81000031

Windows backup ran, and my once-pristine and empty backup drive now has something filling its space, so I assume some files were successfully backed up. Thing is, the Action Center icon has the red x on it and it comes up with one issue: Check, your backup (Important). Clicking this issue produces the following dialog:
Windows Backup: Troubleshooting Options
Check your backup
Windows Backup failed while determining libraries location of one of the users included in the backup.
Details: BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer.
Options:
*Try to run backup again
*Change backup settings
Error code: 0x81000031
Thing is, I'm using home premium. I don't see bitlocker as an option and I'm not terribly enthused about having to repair bitlocker when I can't use it to begin with. (Primarily, because I use Windows 7 Home Premium. Even if I used a version which supported bit locker, I'd never use it to begin with - I lack a TPM chip which means that anybody who has physical access to my machine could compromise my security regardless of bitlocker, it'd just take slightly longer for them if bitlocker were present.)
I'm digressing, the point is I don't use bitlocker and I don't know how not having bitlocker prevents Windows 7 from copying files from one drive to another and making a note in a logfile that the files were backed up. I realize I simplify the method of backing files up but it doesn't get much more complex than copying them to a separate location and timestamping them.
tl;dr: Windows Backup produced error code 0x81000031 because bitlocker drive encryption cannot be used. I don't want to use bit locker drive encryption I just want to back my files up to an external drive. Suggestions? Preferably ones that don't make me run Windows Startup Repair.

Well 4 years later same problem simple fix, did every thing else as suggested by microsoft sys repair start up repair etc etc and just removing the drive that was included in library fixed the issue i have spent hours on
now have to reinstall all that sys restore removed...SO EVERYBODY do what Sneha said first..
Clicked "Start", then "Computer".
Right clicked on the "Library" I wanted to modify, and selected "properties".
Immediately saw that my DVD drive was an included folder in the library.
Clicked on the drive in the list, and the Remove Button became active.
Clicked on "Remove" and it removed the drive from the list.
Clicked on "Incude Folder" and added in my real backup folder location (not required, I just want a libray connection to
it).
Clicked on "Ok". thanks ath1234 for the process..Cheers

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Windows backup fails

We are trying to backup server 2008, hyper v host, with 2 vms. Windows backup fails: the system writer is not found in the backup.
Event log error:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 11/22/2014 9:10:26 PM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: VM01
Description:
The backup operation that started at '‎2014‎-‎11‎-‎23T02:00:25.981000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Nothing we seem to try fixes this any idea's would be appreciated

Hi David,
The problem can occur due to the following reasons:
Not enough space inside the virtual machine's VHD.
The Integration services installed is not installed.
The OS is unable to auto-mount the snapshotted VHDs during the backup process.
Also have a look at the following link and see if the symptom matches your problem:
http://blogs.technet.com/b/asiasupp/archive/2011/08/01/windows-server-backup-failed-to-backup-with-error-0x81000101.aspx
Regards
Markus

Error 8004230f and 2155348075 "Windows Backup failed to create the shared protection point on the source volumes."

Hello,
When I try to run a system state backup with this command: wbadmin start systemstatebackup -backuptarget:<drive letter>
I get the error
"Failed to create the shared protection point on the source volumes.
ERROR - Volume Shadow Copy Service operation error (0x8004230f)
The shadow copy provider had an unexpected error while trying to process the specified operation."
I'm not sure how to fix this. I'm logged into the machine as an Administrator.
Windows Server Enterprise 2008 SP2 64-bit
Any suggestions??

After I re-registered the dll, I'm still getting the same error in the command window. The DLL registers successfully and the "MS Software Shadow Copy Provider" starts fine.
Two errors in the Event Viewer:
1.)
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/21/2014 10:11:25 AM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      mfacs-server-7.gs.umt.edu
Description:
Backup started at '1/21/2014 5:11:11 PM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348075'. Please rerun backup once issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
    <EventID>521</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-21T17:11:25.287Z" />
    <EventRecordID>11410</EventRecordID>
    <Correlation />
    <Execution ProcessID="4964" ThreadID="3528" />
    <Channel>Application</Channel>
    <Computer>mfacs-server-7.gs.umt.edu</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BackupTime">2014-01-21T17:11:11.920Z</Data>
    <Data Name="ErrorCode">2155348075</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
</EventData>
</Event>
2.)
Log Name:      Application
Source:        VSS
Date:          1/21/2014 10:11:24 AM
Event ID:      12293
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mfacs-server-7.gs.umt.edu
Description:
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1}) [hr = 0x8000ffff].
Operation:
   Executing Asynchronous Operation
Context:
   Current State: DoSnapshotSet
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">12293</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-21T17:11:24.000Z" />
    <EventRecordID>11409</EventRecordID>
    <Channel>Application</Channel>
    <Computer>mfacs-server-7.gs.umt.edu</Computer>
    <Security />
</System>
<EventData>
    <Data>{b5946137-7b9f-4925-af80-51abd60b20d5}</Data>
    <Data>EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1})</Data>
    <Data>0x8000ffff</Data>
    <Data>
Operation:
   Executing Asynchronous Operation
Context:
   Current State: DoSnapshotSet</Data>
    <Binary>2D20436F64653A20434F52534E50534330303030313630392D2043616C6C3A20434F52534E50534330303030313539302D205049443A202030303030323732302D205449443A202030303030343139322D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E5420415554484F524954595C53595354454D20202020202D205369643A2020532D312D352D3138</Binary>
</EventData>
</Event>
Results of vssadmin list writers:
C:\Windows\system32>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {f3c10044-4938-4d49-9f2d-789c571a6428}
   State: [7] Failed
   Last error: No error
Writer name: 'SqlServerWriter'
   Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
   Writer Instance Id: {aaa19109-d447-40ec-b71e-2a8fbaed55ad}
   State: [7] Failed
   Last error: No error
Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {f64b2bfa-fd68-4729-bebb-7e281b144fc5}
   State: [7] Failed
   Last error: No error
Writer name: 'DPM Writer'
   Writer Id: {0074a271-4f24-43e0-9ec7-28a44189cb80}
   Writer Instance Id: {38646851-4a56-4499-b90c-181a839cae95}
   State: [1] Stable
   Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {7ae6130c-b116-44a9-87a4-4b8bee461131}
   State: [7] Failed
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {62a5b392-a50f-4703-8c23-acb5590efcd1}
   State: [7] Failed
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {1615a920-5ec9-43d0-b6ff-a5b767430623}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {f22b72f6-940b-42c9-a824-80858e6f5f5c}
   State: [7] Failed
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {4c603239-dd36-4343-aba7-73858e574e39}
   State: [7] Failed
   Last error: No error
C:\Windows\system32>
Thanks!

SBS 2008 Standard - Windows Backup fails first time after every reboot

Backup runs successfully every night.
Once server is rebooted first backup fails, then subsequent backups succeed OK.
So much so that we run the backup manually and let it error (pretty much straight away) then let it run again successfully at 10pm.
Backs up to external hard drive on rotation.
I think it's a VSS issue - has anyone else had this? What did you do to resolve?
Thanks,
J.

Hi,
According to the Event ID 521, please refer to the following article. you will get detailed explains.
Event ID 521 — Backup Operations
http://technet.microsoft.com/en-us/library/cc734453(v=WS.10).aspx
Based on all error messages that you provided, it seems that backup issue caused by sqlwriter.exe. So, please
temporarily disable SQL Server related services and then check if this issue can be solved. It will help us to confirm if this issue was related to SQL Server.
Meanwhile, would you please let me know if you have installed available update rollup for your SBS 2008 Standard?
Hope this helps.
Best regards,
Justin Gu

Since I installed Yosemite, Time Machine is not doing any backup. It just keep coming with the following message in a window: "Backup Failed. Time Machine could´t back up to "....... Time Capsule". What can I do start backing up again?

Time Machine not working since Yosemite was installed.

I had this issue too and went through all the great suggestion found on this site, but finally was able to resolve it after looking at the system.log to see the reason it was failing. By using terminal and entering:
sudo grep backupd /var/log/system.log
I saw "Backup failed with error:11". Then looking above, I saw many "Error: (-36) SrcErr:YES /Applications/" messages. After "Applications" I saw the culprit files that were causing Time Machine to fail. I deleted some Apps that I didn't need and found Time Machine would get farther than before. I then looked at the system.log again and saw it failing on the remaining Apps. I was able to use Time Machine to restore these App directories from a couple months ago before the Time Machine was failing. Now the problem is resolved. Whew! It seemed to be choking on corrupt files and these can be corrected by restoring earlier ones that were not corrupted.
Well, I thought I should share this with others that may have run into the same issue so they can save time. Hope it helps!

Windows Backup fails to complete and System shows 29 Restore Points all titled "System Image restore point" but none will work.

Problems both seemed to appear about the same time and may be related.
Had backups on an external drive prior to the problem and appeared to be working. I have since cleaned the external drive in an attempt to start a new backup series but it continues to stop and report backup has failed.
The System restore was working fine and one day it had changed all the existing Restore Points to "System Image restore point"
but still showed all the different dates. In the System Properties window it indicates that there are 0 bytes in "current usages",
which I assume they are all empty but I can't create any new ones. I get Error code 0x80042308.
I have tried the Clean Boot with no results. I use MS Security Essentials for virus protection.
I have no other symptoms or problems on the PC.
About ready for a Recovery and start all over.
George M1

Hi,
Your first step should be to run chkdsk /r /f on all the drives in that computer. Shadow copy errors are often caused by disk problems (usually minor) which chkdsk will find and correct.
Also, this issue can be caused that VSS dlls are corrupted.
Re-install the VSS dlls by following these steps:
a. Using command prompt, CD to the WINDOWS\system32 directory
b. Stop the Volume Shadow Copy service by executing the command "net stop vss"
c. Register the following DLLs and services by executing these commands:
regsvr32 ole32.dll
regsvr32 vss_ps.dll
Vssvc /Register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
Hope these could be helpful.
Kate Li
TechNet Community Support

Setting up of Windows backup failing

I've added a 2TB USB drive (Western Digital MyBook) to a new 2012 Essentials server to allow Server Backup to perform a secondary (non-cloud) backup. The setup routine is failing during (or immediately after) formatting with the message "The system
cannot find the file specified". Sometimes, when I try to repeat the process, I get an error in a snap-in of the MMC (blbmmc.dll). Where should I be looking to troubleshoot this please?

Hello Milos
Thank you for replying. Looking at this more closely, the error occurs when the summary status of the Backup Schedule Wizard changes from "Formatting" to "Modifying existing schedule", which would suggest the wizard can't find the existing
config.
I can't find any error codes because this error is not being reported in Event Viewer. I have no other backup configured.
Best - Anthony

Ideapad S400 Battery backup Problem

Hi,
I'm using S400 notebok,i'm having battery backup problem,I'm getting 2 hrs backup only,Shall i do battery gauge reset to improve backup hrs,If ok,Then how should i do it?
plz g've reply..
Sridhar Gundu

Hi Sridhar,
Welcome to Lenovo Community Forums!
I’m sorry to hear that there is battery backup issue in your S400 Laptop, I suggest you to change the power plan, reduce the brightness and then check if the issue persists also please let me know the OS (Operating System) installed in the computer.
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

System State Backup fail. Writer name: 'NTDS' : State: [11] Failed : Last error: Non-retryable error

Hello!!! Everybody,
I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
c:\>wbadmin start systemstatebackup -backuptarget:d:
but backup was not successful & I got following error in command prompt.
" A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
I also ran following command to know exact problem.
c:\>vssadmin list writers
I got following error
Writer name: 'NTDS'
   Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
   Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
   State: [11] Failed
   Last error: Non-retryable error
I also checked Event Viewer & got following 3 noserror.
(1) Event ID : 8229, Source : VSS
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
Process ID : 608
(2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
(3)Event Id : 521 Source : Backup
The backup operation that started at '‎2014-‎05-‎13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
the event details for a solution, and then rerun the backup operation once the issue is resolved.
I have also restart the server but problem is not resolved. I have no SQL in my Server.
I also re-register the VSS components with the help of following website.
Website Link : https://kb.acronis.com/content/45776
You are requested please solve my problem on very urgent basis.

You can refer below link for your issue
http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Windows Backup creates "locked" directory on SMB share

I'm trying to back up my Windows 7 laptop to my Mac Mini over SMB.
Normal non-backup file operations work okay, from the desktop: I can create folders, drag files, delete files, etc.
But Windows Backup fails, because it creates a directory on the SMB share that--despite ACLs--OS X won't let anyone create files within, or change the security settings. The only option is to rm -rf the directory.
The ACLs look like this (the directory Windows Backup creates is called 'MEGALITH'. I tried creating a parent directory (called 'Megalith') with inherited ACLs, but to no avail:
sarsen:Megalith root# ls -le .
total 0
drwx------+ 2 windowsbackupuser staff 68 Jan 8 12:49 MEGALITH
0: user:root inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_i nherit
1: group:admin inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_i nherit
2: user:_spotlight inherited allow list,search,file_inherit,directory_inherit
Even with these ACLs, I cannot chown the MEGALITH directory. Nor can I edit its ACLs in the Server window.
My SMB config is:
sarsen$ defaults read /Library/Preferences/SystemConfiguration/com.apple.smb.serve r
    AclsEnabled = 1;
    AllowGuestAccess = 0;
    AllowNTLM2Auth = 1;
    DOSCodePage = 437;
    EnabledServices =     (
        disk
    LocalKerberosRealm = "LKDC:SHA1.C5D430A59786EE0CC0515EEF37A77A538C6D612A";
    NetBIOSName = sarsen;
    ServerDescription = sarsen;
    Workgroup = WORKGROUP;
    "wins server" =     (
And the error log says:
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: init request
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: init return domain: SARSEN server: SARSEN
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: uid=0
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: od failed with 2 proto=ntlmv1-with-v2-session
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request: user=SARSEN\\windowsbackupuser
Jan 8 12:49:27 sarsen.nerdgod.com digest-service[711]: digest-request kdc: ok user=SARSEN\\windowsbackupuser proto=ntlmv1 flags: NEG_KEYEX, ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM2, NEG_ALWAYS_SIGN, NEG_NTLM, NEG_SIGN, NEG_TARGET, NEG_UNICODE

For interoperability with Windows clients, this is absolutely 100% bad behavior:
http://support.microsoft.com/kb/326549
Note Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs. For example, you can delete, rename, and change a folder with the Read-only attribute by using Windows Explorer.
The Read-only and System attributes is only used by Windows Explorer to determine whether the folder is a special folder, such as a system folder that has its view customized by Windows (for example, My Documents, Favorites, Fonts, Downloaded Program Files), or a folder that you customized by using the Customize tab of the folder's Properties dialog box. As a result, Windows Explorer does not allow you to view or change the Read-only or System attributes of folders. When a folder has the Read-Only attribute set it causes Explorer to request the Desktop.ini of that folder to see if any special folder settings need to be set. It has been seen where if a network share that has a large amount of folders set to Read-only, it can cause Explorer to take longer then what is expected to render the contents of that share while it waits on the retrieval of the Desktop.ini files. The slower the network connectivity to the share the longer this process can take to the point where Explorer may timeout waiting for the data and render nothing or appear to hang.
Note In some previous versions of Windows, you can change the Read-only attribute for folders by using the Properties dialog box for the folder, but no versions of Windows permit you to change the System attribute by using Windows Explorer.

IdeaPad S400 Touch Windows 8 reinstall

Hello to all. This is my first post on this forum. I bought a IdeaPad S400 Touch several months ago (October) and one of the first things I did was create a backup image on an external hard drive using the tool in Windows 8. I then wiped the hard drive completely in order to install Ubuntu. I was going to put Windows 8 back ont he machine and have the two running side by side. However, I have not been able to reinstall Windows 8. I physically took the hard drive out of the laptop and completely erased it using Disk Utility on my Mac, making sure that the disk was reformatted as MS-DOS. I also created a separate partition, named Lenovo, of 20GB that contains the backup files from my original backup. Still, using OneKey recovery doesn't work, and I am unable to reisntall Windows 8. Please , would someone tell me what I am doing wrong and if there is any way to fix this mess I have created? I will say things were so much easier back in the good old days when PCs shipped with recovery media. Thanks.

Hi Robert,
Welcome to Lenovo Community!
I’m sorry to hear that the OKR (One Key Recovery) is not working as expected in your S400 touch Laptop, let me inform you that once the partition structure HDD (Hard Disk Drive) gets modified the hard disk recovery corrupts, if you have created the recovery media then you can use them and restore the Operating System. Please try running OneKey Recovery from hard disk, power off the laptop then press Novo button instead of pressing power button and check if it works and if OKR does not work. I suggest you to contact our Technical Support Team to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Windows 2008 R2 backup fails with event 521 error code 2155348001

Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/10/2014 11:28:52 PM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SHAQTUS.scdl.local
Description:
The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
Rick

Hi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ideapad s400 windows 8 backup failed

Similar Messages

Maybe you are looking for