Ideapad S405 Touch Sensitive Mouse Buttons

Hi
I have recently bought an Ideapad S405.
I have noticed that the area for left and right mouse buttons is also touch sensitive.
Because of it the mouse moves a bit whenever I press the left or the right mouse button.
This is quite a bit irritating for me.
Any solutions ??
Regards
Hitesh

Hi Hitesh,
Welcome to Lenovo Community!
I’m sorry to hear that the touchpad buttons are sensitive and move the cursor while the buttons are pressed. Hence, I would suggest you to change the settings of “Edge Motion Region” to resolve this issue. To perform this, please perform till the 3rd step from the below link and then click on Pointer Motion> Edge Motion Region>Then set the region so that it will not affect the touchpad buttons. Please let me know the findings:
How to access Touchpad Settings?
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Extremely sensitive mouse button

The mouse button on my Mac is very sensitive. It's at the point where if I even touch it with the side of my thumb, it clicks. Also, leaning on the space next to the button makes it click, too. It's incredibly annoying. The problem started only a week or so ago. I have no idea what caused it. Help?

I think that u messed with the preferences.
Try going to system preferences and go to trackpad on the new mac.
If its the older mac go to mouse and keyboard and there put the sensitivity down
and screw around with it until its right.
Hope this helps.
If not just ask me more help and give me details.
DJB

Touch sensitive multimedia buttons don't work ! (Toshiba Satellite M645-S4050)

I've Toshiba Satellite M645-S4050. My multimedia touch buttons don't work except Vol+ and Vol-. All of them are making sounds when I touched but no action! 1) I uninstalled Toshiba Value Added Package (TVAP), 2) rebooted the machine, 3) installed TVAP then 4) rebooted again. But nothing's changed. 5) I reinstalled all Toshiba Utilities includes Assist and Flash Cards but same result. Also 6) I unplugged the battery and AC adapter because of static energy issue possibility and 7) choosed the default settings from the BIOS menu. Still same ! What am I supposed to do ?

If it's under warranty, I'd send it back to Toshiba and have them fix it right this time. It took 2 repairs for the Depot to fix my problem, by replacing the mother-board.
Call customer relations and try to get it sent to Toshiba "VIP" Tri-Star repair facility in Garden Grove CA 92843, they repair it when their regular service tech's can't get it right the first, or second time.
Fix it now, or it will be a hassle for you as long as you own it.

Touch-sensitive buttons of Zen Mi

i am intrested in buying this item, however i don't have the chance to "feel before i buy"..
so i have concerns about touch-sensiti've buttons of the unit. do they get triggered by accident while the player is in the pocket ? how useful and comfortable are they in reality ? do unwanted/unexpected 'keypresses' occur while the unit is in a hand, or in a pocket or carrying bag ?
thanks

In using my Zen Micro for the past 3 weeks, I'd say you have to 00% of the time put it on hold when you are not using it. I mean EVERY time you put it in your pocket, bag, or out of use, you have to put it on HOLD. Maybe once it's in your pocket the buttons won't activate, but it's nearly impossible to reach into your pocket or even put it into your pocket without "touching" a button.
When you use the carry case, it is even more annoying because the casing makes it harder to access the hold button. However, when it's in the case clipped to my belt, I don't use hold then.
Put it this way, when you WANT to use the touch buttons, they are cool. When you don't want to, they are extremely annoying. I'd say, make only the center strip like on the Zen Touch touch sensiti've, make the other buttons click, no need for them to be all touch buttons. Nice gimmick, but not practical at all. Plus, 50% of the time the "back" button doesn't work on the st or even 2nd "touch."
Otherwise, I've been happy with it. Great sound quality and I li've the ZERO lag time from powering on to hearing music. Very nice.
Jason

Hp pro book 4510s touch pad and buttons notworking.

i have pro book 4510s , my touch pad mouse buttons stopped working, i tried to restore and even change the operating system hoping that it was corrupt but all the same its not working until today, please help me.

Hello tokenltd,
In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
HP Probook
Thank you
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes to the F11 mode.

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode. Is this a hardware or software issue? How can it be fixed?

I called Apple. The problem was caused by settings in Mission Control. After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away. Apple's help was excellent!

Lower click wheel unresponsive, reqind button is touch sensitive

I recently bought a 16GB nano from a guy i found on a local classified ad. I thought everything was good, until i started listening to music, and i could only use the upper side of the click wheel to turn up the volume, the lower side is unresponsive. also, when i was trying to turn up the volume, moving by the rewind button would restart the song... its like the rewind button is touch sensitive. the ipod is in warranty, so is it possible for me to go to the apple store and replace it?

wow, someone help?

Ideapad z400 touch after windows 10 upgrade

I am using the ideapad z400 touch and have been upgraded to windows 10. "Intel graphics card => I reinstalled the windows 8.1 driver from lenovo site", and my brightness problem is solved. I am facing the problem with the intel HD graphics 4000 display driver that I install from lenovo site. The driver seems like not fully compatible with windows 10. My screen will turn off after 5 minutes and when I move the mouse to wake it up I face the problem, the screen will freeze for a while and start to wake up and showed me the message "intel display driver.....has stopped responding and has recovered" This happens everytime after my screen turn off. Besides, my pc can't go to sleep mode. When I select sleep for my pc, the screen went black and it takes a long time to sleep but actually it is not, then it will shut down on its own. I have to press the power button to turn it on again. I think this problem is also related to the display driver. I have no problem with this display driver on windows 8.1. Will Lenovo come out the new driver that compatible with windows 10 from Lenovo site? The latest operating system they provide the drivers is untill windows 8.1. If they do not support the windows 10 driver I will roll back to windows 8.1 with no choice but I sincerely hope that I can keep using windows 10 on my pc I like it. Microsoft gives us one month time to roll back to windows 8.1. I don't know can I upgrade to windows 10 again if I found that Lenovo comes out their new drivers

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

IdeaPad U310 touch: Can no longer enter bios after updating to latest version

I flashed to the latest U310 bios (http://download.lenovo.com/consumer/mobiles/65cn99ww.exe). I switched to "legacy boot mode" (from UEFI), in an attempt to workaround a driver issue. Now, I'm no longer able to enter BIOS whatsoever. There are plenty of forum posts by many users hitting the same or similar issues on U310/U410/U330 and similar ideapad products. But the resolutions where they exists are either invalid, or involve flashing to 65cn99ww.exe, which is not possible.
[Environment]
Lenovo IdeaPad U310 touch, Windows 8 (also tried Windows 8.1)
[What I did]
Flashed BIOS using official Lenovo bits (65cn99ww.exe). No errors occured
Enter BIOS afterwards and change to legacy boot mode (from UEFI)
[Problem]
Cannot enter BIOS to view or change any settings.
[Debugging]
Try to enter BIOS by key button sequence.
1. Tried the following combinations during bootup: F2, Fn+Fn, F10, Fn+F10, F1, Fn+F1, 'B', 'N', Fn+'B', Fn+'N', Delete, Esc.
==> No change in behaviour. I tried each many times in case the timing is important.
2. Boot by Novo button. This brings up a menu, which includes an entry to enter BIOS. However, choosing that menu entry boots to Windows
3. Reboot to UEFI firmware settings from Windows (Settings/General/Advanced/UEFI). I can choose to boot to UEFI settings, but ultimately, just boots to Windows 8.
4. Try to reflash BIOS. Fails with error 182: Version less than or equal. So reflash fails
5. Try to reflash old BIOS. Flashing fails
6. Unplug battery from motherboard for 1 minute. No difference in behavior
7. Boot with SATA disconnected.
8. Try various flashing options and alternate ways to flash. Not successful
[Conclusion - BIOS is faulty]
I think this problem can be solved easily with a slightly newer variant of the BIOS being officially released by Lenovo. If someone from Lenovo is reading, can you please open an internal case on this.
Otherwise, I'm open to suggestions from the community. Does anyone know how I can hex edit the bios version #.
Thanks
Solved!
Go to Solution.

All,
When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
It may be that we have removed it. The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
Is it possible that you have a touch model and applied the non-touch BIOS?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Mavericks Mail-cannot scroll down to select a group by holding mouse button.

I do not like the new Mavericks mail. When I attempt to hold the left mouse button and scroll down to select a group, the program automatically locks onto the first message I touch and moves it. Prior to Mavericks scrolling was an easy process. This new mail is very clumsy and I have to select one message, then hold shift key, then selelct the last message in the group. ....Clumsy and slow.
Does anyone know a workaround for this? The tutorials don't address it and the "What's new in Mail?" file doesn't either. If there is not a workaround, is there a way to disable the Mavericks configuration in Mail and go back to regular mail? I'd appreciate any tips or help on this.

Okay, I tried deleting the Finder preferences first (along with a handful of other preference files that I knew were no longer needed), and it seemed to help--at first. But eventually, all the same problems started happening again, so I concluded that it was necessary to just start with a fresh (empty) preferences folder. As you know, this is a pain to deal with, but I limited my pain by moving all the old preferences files into a folder on the Desktop rather than simply deleting them. That way, I could just put back any missing preferences that were too hard to recreate. Restoring all of my preferences with new (uncorrupted) prefs files will be an ongoing process, but the good news is that this effort (so far) seems to have solved the problem. Mail is responding to all my clicks, even when I switch between different apps and different spaces. :-)
Now that things are working correctly, I notice that when I switch between apps and/or spaces, the selected app (or the frontmost app in the new space) will show an active state for its window, whereas before, the selected app didn't update to show that it was active--it kept the inactive state for its window. I'm no expert, but it seems to me that this might have something to do with the windowserver process, so it might make sense for the next person who stumbles on this thread to start by deleting any preferences files that begin with com.apple.windowserver. Just a hunch, but it's worth starting there before you do a complete flush of all your preferences.
Thanks again for the help--hopefully this workaround will be persistent. Fingers crossed!

Nokia 701 touch sensitive problem

I have with me 701 with the latest firmware version, i often have touch sensitive problem. Sometimes it get ok by just switch off the phone and sometime by removing battery (becoz then button too don't work).
what should i do?
Someone Plz help !

Hi salih_367,
Thank you for your post and welcome to the forums!
We're sorry to hear about your problem. It seems that your Nokia 701 headphone plug has a connectivity problem. As the problem is likely caused by the phone hardware, it is something you cannot fix yourself without voiding the warranty. What you can do however, is to check if the socket may have gotten some dirt or fluff in and try clean it.
If the problem persists, we would advise you to visit your nearest Nokia Care Point and let them have a look.
Let us know how you get on,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Find Supply Demand Form Left Mouse Button Behavior

Release 11.5.10.2, 10G database.
A customer has a strange mouse behaviour issue In the ASCP -> Supply/Demand form that the began after installing Demantra.
The mouse cursor is returning to the original location that it was just before the user attempted to click in another field.
If the customer uses custom folder, the problem is less apparent in that they can select additional fields in the folder's form..
There is a Note.753324.1 ''Diagnosing Form Mouse Focus Problems In Applications R11i" that suggests a few options; but the this customer is on forms 6.0.8.28.0 and it is unclear if the issue in that note applies in this case.
Does anyone have any ideas as to how to get to the root of this issue or have seen it before and have a solution?
Edited by: Bob Marchant on Feb 23, 2009 5:20 PM
Edited by: Bob Marchant on Apr 13, 2013 6:57 AM

James,
Sorry I am so lengthy. The problem is that with the technical support guy on line, when the Mouse button 4 event occurred I described to the tech that I was pushing and pulling the mouse from the back end to avoid touching the buttons on the side and every time I rolled the mouse a few inches forward the dashboard assigned to mouse button 4 appeared and next when I rolled it back the dashboard disappeared, I rolled it forward and it reappeared and so on. Then the tech wanted me to click on the apple and go into system preferences and as my cursor touched the file menu to get to the preferences that menu dropped without me left clicking the mouse. As I passed over edit and view they just dropped down.
What do you make of that? I am presently running OSX leopard without my printer and scanner installed. If I see no problem in two days, I will plug in the printer and install it. Then after that the scanner and see if the problem happens. I will follow your suggestions about relearning the mouse though.
Stephen
Stephen

Ideapad S415 Touch trackpad right click issue

The problem is that when I press the right mouse button nothing happens. I don't get the dropdown menu. I am able to get it by using thw two finger tap gesture and with an external mouse. Oddly enough I can two finger tap right on the rigth mouse button itself but I can't click it.
I know the button is working but I don't know what happened. I updated the drivers frim the support page and this happened. I tried to look through the mouse properties from the control panel but could not find anything that would disable my right mouse button. when I press the right mouse button, on the "Buttons" tab on the properties, the button configuration menu switches to "other pointing devices. Suggesting that the right mouse button is not connected to the trackpad???
I Can't for the life of me find another person with a simlar situation so I must ahve done soemthing so obvous and wrong. I would glady appreciate any suggestions to solve my predicament. Thanks.

I also had these problems initially. I guess you have already run Lenovo system update and you have the latest driver (I have 17.0.12.52). In any case, I would recommend to run system update to get all latest drivers first. Meanwhile, this is working for me (could be that I just got used to it ). What works best for me is to use index and ring finger for the two finger click. For most people index and middle finger have quite different lengths, so there is a higher probabiliy that you are missing the time window for doing a two finger touch and instead end up with two consecutive one finger events (which then corresponds to a left click). Hope this helps.
Frank

Safari 6.0 page zooms in (even if I'm not touching the mouse) how do I zoom back out?

Safari 6.0 page zooms in (even if I'm not touching the mouse) how do I zoom back out?

I turned off zoom in sys pref so hopefully that will help… but when it zooms in huge "on its own" you have to use the back button to go back to normal size as the double tap doesn't work but half the time the back button is greyed out so you have to close the window and start all over which is a pain in the … so why is my back button doing this. It will do this on a page that I used the backbutton on previously?

Missing Themes option and touch sensitivity is strange..Sticky swiping

Just bought 2 new blackberry storm 9350 one from Amazon and one from ebay for my husband. Both arrived new in their individual boxes. One was made in Canada (Amazon), and one was made in Mexico (ebay). The one made in Canada does not have options to choose different themes. That is my main concern.
A second strong concern is  the touch sensitivity is really sticky on the one from Canada. The touch sensitivity is real nice on the one from Mexico. I set touch sensitivity exactly the same on each, but the Canadian one is not nice at all swiping is really sticky.
Note:   This is my 3rd blackberry storm, and my husband's 2nd. These 2 are not acting quite like the earlier ones.
3rd issue is that The one from Canada did not come with a charger...Only the adapters for foreign outlets but no charger to plug them into. It did come with a manual and cds. However the one from Mexico did not come with a manual or cds (luckily I have one from the other box)

This is a partial duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Storm/mms-missing/m-p/2603751#M67694
But, given the additional information in this thread, I would deduce that the condition of at least one, and perhaps both, of the devices is not "new"...rather, a used device that has been carefully repackaged so as to deceive the purchaser into thinking they have bought a truly new device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Ideapad S405 Touch Sensitive Mouse Buttons

Similar Messages

Maybe you are looking for