Ideapad U110 with XP no sound

I bought a ideapad u110 with vista this summer. I currently loaded a xp on it.  I installed the audio driver on it found in the lenovo.com. but it doesnt work, no sound at all.
Solved!
Go to Solution.

You need installing KB888111.
Read Ideapad FAQ.
//help will save the world

Similar Messages

  • Ideapad U110 Linux drivers

    I managed to install ubuntu on ideapad u110.
    Only big problem is the resolution , i can't manage to get higher then 800*600  using Vesa
    I would like to make the intel driver work , for acceleration on 1368*768
    Seems to be an issue with chipset
     00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
    anyone have an idea ? maybe other drivers are available?

    Have a look here :
     http://www.linlap.com/wiki/lenovo+ideapad+u110
    You'll find Xorg info in Note 1.

  • Problem with kde and sound

    Hi!
    I've a problem with KDE and sound.
    When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
    Same happens with kde start.
    Can anybody help me?
    Thanks!

    Pilli wrote:
    Hi!
    I've a problem with KDE and sound.
    When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
    Same happens with kde start.
    Can anybody help me?
    Thanks!
    Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

  • Doubts with conectivity of sound blaster card with thermaltake armor c

    Hi
    I have a Asus P5WD2 Premium motherboard and a Thermaltake Armor case, im not satisfied with the onboard sound of this motherboard and i want to buy a Sound Blaster X-FI XtremeMusic. My question is, the case has on the top some ports for audio and speaker that is possible to connect with the motherboard through jumpers, does the sound blaster card has jumpers to connect to my case upper ports?
    Thanks for your attention
    Message Edited by pseq on 0-08-2006 08:55 PM

    You could possibly but Id say you also may get interference and the like.
    Nice case BTW

  • I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

    I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

    Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
    Thanks,
    Adobe Reader Team

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Is it possible to get a refund if i bought an album with extremely bad sound quality?

    As asked in the title, is it possible to get a refund if i bought an album with extremely bad sound quality?
    I am very unsatisfied with my latest purchase of the album "Never take ffriendship personal" by "Anberlin" ...
    I can find all the songs in much better quality, even on YouTube ...
    I bought two other albums by Anberlin at the same time, on which the sound quality is much much better and perfectly clear.
    is it possible to get some sort of refund ???

    http://support.apple.com/kb/HT1933
    Regards.

  • What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.

    What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.

    Trax and kirt are correct. I'm pretty good with technology, being an engineer and all, and I can tell you for a fact that this 'swoosh' sound (triggered by a successfully sent SMS) can NOT be disabled from ANY menu in iOS 5. The ONLY way to disable it is to flip the silent switch on the left hand side of the phone. This is extremely annoying for some people (like trax, kirt, and myself). For what we pay for Apple products and, in particular, this phone, we simply didn't expect to have to deal with such annoyances. That's why we're Mac users. Please fix this bug.
    I feel like I shouldn't have to say this but it bears repeating: turning off message sounds from the 'sounds' menu does not fix his problem. It still emits the swoosh noise. Whoever suggested this clearly didn't try it because it obviously doesn't work. Who posts a solution to a problem without knowing for a fact that their solution is correct? I find that response condescending because he writer is assuming we're not smart enough to have tried it. In reality, it's vice versa.

  • Ideapad U110 and Intel VT

    Hi there,
    In order to test some virtual machines features, I need to enable the Intel VT instructions out of the CPU.
    However, what a surprise to see there is no way to enable such CPU feature through the bios of the Ideapad U110...
    Do you know if we can upgrade the bios or do anything to recover such option?
    Thanks in advance.
    Regards.
    Eric

    Hi,
    actually, Virtualization Technology should be automatically enabled by default if it is supported by the processor.  And here comes the crucial point:
    Quote
    Q8200
    According to the Intel Product Site, this processor does not support VT (neither of its versions does):
    http://processorfinder.intel.com/details.aspx?sSpec=SLG9T
    http://processorfinder.intel.com/details.aspx?sSpec=SLG9S
    http://processorfinder.intel.com/details.aspx?sSpec=SLB5M
    Quote
    Supported Features:
    # Quad Core
    # Enhanced Intel Speedstep® Technology
    # Intel® EM64T 1
    # Enhanced Halt State (C1E)
    # Execute Disable Bit 2
    # Intel® Thermal Monitor 2
    For Comparison, this is the Feature list of the Q9300:
    http://processorfinder.intel.com/details.aspx?sSpec=SLAWE
    Quote
    Supported Features:
    # Quad Core
    # Enhanced Intel Speedstep® Technology
    # Intel® EM64T 1
    # Intel® Virtualization Technology
    # Enhanced Halt State (C1E)
    # Execute Disable Bit 2
    # Intel® Thermal Monitor 2
    ...which supports VT.
    Have a look here as well:
    http://ark.intel.com/cpu.aspx?groupId=36547

  • Can you test webcam with the Echo / Sound Test Ser...

    I wanted to see if my webcam's video is working with Skype, but I couldn't seem to use it when making a test call with the Echo / Sound Test Service.  Do I have to make an actual call to test the webcam or is there another way?  Thank you.

    Hello there!
    To test your video, please refer to the following instructions:
    For a Windows PC
    For a Mac 
    As asked on another thread previously, Skype does not offer a video calling test service.
    I.T. Professional
    Virtualisation Solutions (VCA-DCV - VMware)
    Donating time to help you here with your Skype needs.
    If I've answered your question, feel free to "Kudo" me!

  • My imac turns on with start up sound then nothing else just the timer going round

    my imac turns on with start up sound then nothing else just the timer going round

    Try restarting holding down the SHIFT key. That will do a directory check in Safe mode. It will take longer to start so continue to be patient.
    If it starts in Safe mode, then restart normally and see how that goes.

  • How do I resolve an unresponsive white screen with a beeping sound in a pattern of three?

    How do I resolve an unresponsive white screen with a beeping sound in a pattern of 3?

    What iMac model and what Mac OSX version (iOS cannot run on Mac computers).

  • I was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

    i was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

    Launch Mail.
    Start "New Message".
    Click "View" in the menu bar and then "Customize Tool Bar".
    Customize Toolbar sheet should drop down.
    At bottom left there is "Show" pop up box, click it and select "Icon and Text".
    Click "Done".

  • I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

  • [SOLVED] No sound on SPDIF with Intel ICH10 Sound Card

    Hi everyone,
    I'm coming from Fedora 12 and recently got a fresh installed Archlinux. I'm very satisfied by the distribution and everything works just as expect for the moment, except one thing : SPDIF output of my sound card.
    I installed the following packages :
    $ pacman -Qs alsa
    local/alsa-firmware 1.0.20-2
    ALSA firmware package
    local/alsa-lib 1.0.22-1
    An alternative implementation of Linux sound support
    local/alsa-plugins 1.0.22-1
    Extra alsa plugins
    local/alsa-utils 1.0.22-2
    An alternative implementation of Linux sound support
    My actual configuration in a few commands :
    $ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Intel
    HDA Intel, STAC92xx Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, STAC92xx Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=Intel,DEV=0
    HDA Intel, INTEL HDMI 0
    HDMI Audio Output
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: INTEL HDMI 0 [INTEL HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    The following command :
    $ aplay -D front:CARD=Intel,DEV=0 tmp/Norrlanda.wav
    gives me sound on the analog (HP) output but this one :
    $ aplay -D iec958:CARD=Intel,DEV=0 tmp/Norrlanda.wav
    gives absolutly nothing (I tested the HDMI output and it's fully functionnal).
    I unmuted everything that could be unmuted on alsamixer and tested varied combo of options snd_hda_intel model=XXXX (as I read that those type of card can have issue of this kind). I try to delete the /etc/asound.state file, various configuration in /etc/asound.conf. But nothing.
    In last resort, I rebooted on a F12 LiveCD and there… everything works fine ! The SPDIF output works just great, without any manipulation (with the same command as above). I tried to import the configuration of /etc/alsa, /etc/pulse and /etc/modprobe.d from this F12 LiveCD (looking if there was any special options about sound card I can just copy/paste to Archlinux) but this failed one more time.
    I really really don't see what I can do to solve this problem (and I already spend 2 entire days on this issue without any result… frustrating). So if someone's got a solution or suggestion (some configurations I can try) on this issue, any help would be greatly appreciated.
    Last edited by DojoMortal (2010-05-01 21:31:41)

    Thx to jonnor on the IRC Archlinux Channel, it works now !!
    For everyone experiencing the same problem with DG45 intel sound card (Codec: IDT 92HD73E1X5 to be accurate), the documented module is not the right one. Use model=no-jd if you want to have the SPDIF output functionnal.

Maybe you are looking for